Stable and recyclable FeS-CMC-based peroxydisulfate activation for effective bisphenol A reduction: performance and mechanism.

In this study, a novel material, iron sulfide modified by sodium carboxymethyl cellulose (FeS-CMC), was successfully synthetized for peroxydisulfate (PDS) activation to remove bisphenol A (BPA). Characterization results showed that FeS-CMC had more attachment sites for PDS activation due to its higher specific surface area. A stronger negative potential contributed to preventing nanoparticles from reuniting in the reaction and improving the interparticle electrostatic interactions of the materials. Fourier transform infrared spectrometer (FTIR) analysis of FeS-CMC suggested that the coordination of the ligand for combining sodium carboxymethyl cellulose (CMC) with FeS was monodentate. A total of 98.4% BPA was decomposed by the FeS-CMC/PDS system after 20 min under optimized conditions (pH = 3.60, [FeS-CMC] = 0.05 g/L and [PDS] = 0.88 mM). The isoelectric point (pHpzc) of FeS-CMC is 5.20, and FeS-CMC contributed to reducing BPA under acidic conditions but showed a negative effect under basic conditions. The presence of HCO3-, NO3- and HA inhibited BPA degradation by FeS-CMC/PDS, while excess Cl- accelerated the reaction. FeS-CMC exhibited excellent performance in oxidation resistance with a final removal degree of 95.0%, while FeS was only 20.0%. Furthermore, FeS-CMC showed excellent reusability and still reached 90.2% after triple reusability experiments. The study confirmed that the homogeneous reaction was the primary part of the system. Surface-bound Fe(II) and S (-II) were found to be the major electron donors during activation, and the reduction of S (-II) contributed to the cycle of Fe(III)/Fe(II). Sulfate radicals (SO4•-), hydroxyl radicals (•OH), superoxide radicals (O2•-) and singlet oxygen (1O2) were produced at the surface of FeS-CMC and accelerated the decomposition of BPA. This study offered a theoretical basis for improving the oxidation resistance and reusability of iron-based materials in the presence of advanced oxidation processes.

A bifunctionalized NiCo2O4-Au composite: Intrinsic peroxidase and oxidase catalytic activities for killing bacteria and disinfecting wound.

A NiCo2O4-Au composite was fabricated following the calcination-reduction method and testified to exhibit the intrinsic high peroxidase- and oxidase-like activities. The composite could activate a low level of H2O2 (100 µM) to kill E. coli and S. aureus. NiCo2O4-Au composite could be easily separated by an external magnet from the media and reused several times. NiCo2O4-Au composite could also effectively damage the existing biofilms and prevent the formation of new biofilms. The electron spin resonance tests showed that NiCo2O4-Au composite catalyzed H2O2 into reactive oxygen species (ROS), mainly including OH, O2-, and 1O2; while the oxidase-like activity of NiCo2O4-Au also stemmed from the ROS formation in the absence of H2O2. The radical trapping experiment confirmed that OH and 1O2 were the main radicals in the antibacterial process for NiCo2O4-Au in the presence of H2O2. A NiCo2O4-Au based Band-Aid was also designed, which exhibited high anti-infective and wound-healing properties. This study has demonstrated that NiCo2O4-Au composite can be a promising antibacterial agent in environmental and clinical applications.

An Automatic Sleep Stage Classification Algorithm Using Improved Model Based Essence Features.

The automatic sleep stage classification technique can facilitate the diagnosis of sleep disorders and release the medical expert from labor-consumption work. In this paper, novel improved model based essence features (IMBEFs) were proposed combining locality energy (LE) and dual state space models (DSSMs) for automatic sleep stage detection on single-channel electroencephalograph (EEG) signals. Firstly, each EEG epoch is decomposed into low-level sub-bands (LSBs) and high-level sub-bands (HSBs) by wavelet packet decomposition (WPD), separately. Then, the DSSMs are estimated by the LSBs and the LE calculation is carried out on HSBs. Thirdly, the IMBEFs extracted from the DSSM and LE are fed into the appropriate classifier for sleep stage classification. The performance of the proposed method was evaluated on three public sleep databases. The experimental results show that under the Rechtschaffen's and Kale's (R&K) standard, the sleep stage classification accuracies of six classes on the Sleep EDF database and the Dreams Subjects database are 92.04% and 78.92%, respectively. Under the American Academy of Sleep Medicine (AASM) standard, the classification accuracies of five classes in the Dreams Subjects database and the ISRUC database reached 79.90% and 81.65%. The proposed method can be used for reliable sleep stage classification with high accuracy compared with state-of-the-art methods.

Exploiting the pliability and lateral mobility of Pickering emulsion for enhanced vaccination.

A major challenge in vaccine formulations is the stimulation of both the humoral and cellular immune response for well-defined antigens with high efficacy and safety. Adjuvant research has focused on developing particulate carriers to model the sizes, shapes and compositions of microbes or diseased cells, but not antigen fluidity and pliability. Here, we develop Pickering emulsions-that is, particle-stabilized emulsions that retain the force-dependent deformability and lateral mobility of presented antigens while displaying high biosafety and antigen-loading capabilities. Compared with solid particles and conventional surfactant-stabilized emulsions, the optimized Pickering emulsions enhance the recruitment, antigen uptake and activation of antigen-presenting cells, potently stimulating both humoral and cellular adaptive responses, and thus increasing the survival of mice upon lethal challenge. The pliability and lateral mobility of antigen-loaded Pickering emulsions may provide a facile, effective, safe and broadly applicable strategy to enhance adaptive immunity against infections and diseases.

Immobilization of TiO2 Nanoparticles on Chlorella pyrenoidosa Cells for Enhanced Visible-Light-Driven Photocatalysis.

TiO2 nanoparticles are immobilized on chlorella cells using the hydrothermal method. The morphology, structure, and the visible-light-driven photocatalytic activity of the prepared chlorella/TiO2 composite are investigated by various methods. The chlorella/TiO2 composite is found to exhibit larger average sizes and higher visible-light intensities. The sensitization of the photosynthesis pigment originating from chlorella cells provides the anatase TiO2 with higher photocatalytic activities under the visible-light irradiation. The latter is linked to the highly efficient charge separation of the electron/hole pairs. The results also suggest that the photocatalytic activity of the composite remains substantial after four cycles, suggesting a good stability.

Mussel-inspired green synthesis of polydopamine-Ag-AgCl composites with efficient visible-light-driven photocatalytic activity.

Polydopamine-Ag-AgCl composites (PDA-Ag-AgCl) were synthesized using a mussel-inspired method at room temperature, where PDA acts as a reducing agent to obtain the noble Ag nanoparticles from a precursor. The morphologies and structures of the as-prepared PDA-Ag-AgCl were characterized by several techniques including field emission scanning electron microscopy (FESEM), transmission electron microscopy (SEM), Raman spectra, and X-Ray photoelectron spectrum (XPS). The morphological observation depicts formation of nanoparticles with various micrometer size diameters and surface XPS analysis shows presence of various elements including Ag, N, Cl, and O. The enhanced absorbance of the PDA-Ag-AgCl particles in the visible light region is confirmed through UV-Vis diffuse reflectance spectra (DRS), and the charge transfer is demonstrated by photoluminescence (PL) and photocurrent response. The synthesized PDA-Ag-AgCl composites could be used as visible-light-driven photocatalysts for the degradation of Rhodamine B. The elevated photocatalytic activity is ascribed to the effective charge transfer from plasmon-excited Ag to AgCl that can improve the efficiency of the charge separation during the photocatalytic reaction. Furthermore, differences in the photocatalytic performance among the different PDA-Ag-AgCl composites are noticed that could be attributed to the Brunauer-Emmett-Teller (BET) specific surface area, which benefits to capture the visible light efficiently. The PDA-Ag-AgCl exhibits excellent stability without a significant loss in activity after 5cycles. The proposed method is low-cost and environmentally friendly, hence a promising new way to fabricate plasmon photocatalysts.

[Effects of shade and competition of Chenopodium album on photosynthesis, fluorescence and growth characteristics of Flaveria bidentis].

It is necessary to elucidate its growth mechanism in order to prevent and control the further spread of Flaveria bidentis, an invasive plant in China. The effects of shading (shading rate of 0, 50% and 80%, respectively) and planting pattern (single cropping of F. bidentis, single cropping of Chenopodium album and their intercropping) on germination rate, fluorescence characteristics and growth characteristics of the two plants were investigated. The results showed that moderate shading contributed to emergence rate, but emergence rate of F. bidentis was not uniform, which was one of important factors as a stronger invader. With the increasing light intensity, net photosynthetic rate (Pn), photochemical quenching (qP), electron transport rate of PS II (ETR), quantum yield of PS II (Y), non-photochemical quenching (qN), water use efficiency (WUE), shoot bio-mass rate (SMR), crown width (CW) and dry biomass (DM) increased, specific leaf area (SLA) decreased, LMR of F. bidentis significantly increased, LMR of C. album changed insignificantly, and the increment of DM of F. bidentis was higher than that of C. album. In 80% shade treatment, Pn and DM of F. bidentis were lower than those of C. album. In natural light treatment, Pn, qN, WUE and relative competitive index (RCI) were the highest, CW and DM of intercropped F. bidentis and Pn, Y of C. album were significantly lower than that of the respective single treatment. F. bidentis had higher light saturation point (LSP) and light compensation point (LCP). In conclusion, the shade-tolerant ability of F. bidentis was weaker than that of C. album, but it was reversed in natural light treatment. The two plants adapted to the weak light in 80% shade treatment by increasing SLA and decreasing LMR. F. bidentis improved competition under natural light by increasing SMR and decreasing CW.