Room-temperature ferromagnetism, half-metallicity and spin transport in monolayer CrSc2Te4-based magnetic tunnel junction devices.

The discovery of novel two-dimensional (2D) half-metallic materials with a robust ferromagnetic (FM) order and a high Curie temperature (Tc) is attractive for the advancement of next-generation spintronic devices. Here, we propose a monolayer with stable 2D intrinsic FM half-metallicity, i.e., the CrSc2Te4 monolayer, which was constructed by intercalating a monolayer of 1T-CrTe2-type sandwiched between two layers of 2H-ScTe2 monolayers. Our calculations reveal that it exhibits exceptional dynamical, thermal, and mechanical stabilities accompanied by a robust half-metallicity characterized by a wide bandgap of 1.02 eV and FM ordering with a high Tc of 326 K. Notably, these properties remain intact in almost the entire range of the biaxial strain from -5% to 5%. Furthermore, our investigations demonstrate excellent spin transport capabilities, including an outstanding spin-filtering effect, and a remarkably high tunneling magnetoresistance ratio peaking at 6087.07%. The remarkable magnetic features of the 2D CrSc2Te4 monolayer with room temperature FM, intrinsic half-metallicity, and 100% spin-polarization make it a promising candidate for the next-generation high-performance spintronic nanodevices as well as high-density magnetic recording and sensors.

The Effects of Irradiation on the Improvement in Oxidation Behavior of MX-ODS Steel in Liquid Pb.

Lead-cooled fast reactors exhibit strong inherent safety performance and good economic features, while material degradation due to corrosion and irradiation is still challenging. Oxide dispersion-strengthened steels are one of the promising candidates for fuel cladding materials. The effects of both irradiation and corrosion on ODS steel need to be further studied. In this work, MX-ODS steel was irradiated by Fe ions at 500 °C up to 46 dpa. Later, the as-received specimen and the irradiated specimen were used to conduct corrosion tests in oxygen-saturated Pb at 550 °C for 1 h. In the as-received specimen, discontinuous oxides penetrated by Pb and Pb in contact with steel matrix were observed, demonstrating unsatisfactory corrosion resistance of the material. However, in the irradiated specimen after corrosion experiment, a protective oxide layer formed and prevented Pb attack. The oxidation behavior differences between the two specimens can be attributed to the defects produced by irradiation and the structural discrepancy in oxides caused by the formation process. A possible mechanism of irradiation on the corrosion is discussed. In the as-received specimen, Fe atoms loss led to voids in the oxides, and lead penetrated the oxides through these voids. In the irradiated specimen, defects left by previous irradiation helped to form a more uniform oxide layer. The adhesive outer magnetite oxide and the Fe ions generated from where grain boundary oxidation developed retarded the presence of voids and made the oxide layer protective.

DHODH inhibition represents a therapeutic strategy and improves abiraterone treatment in castration-resistant prostate cancer.

Castration-resistant prostate cancer (CRPC) is an aggressive disease with poor prognosis, and there is an urgent need for more effective therapeutic targets to address this challenge. Here, we showed that dihydroorotate dehydrogenase (DHODH), an enzyme crucial in the pyrimidine biosynthesis pathway, is a promising therapeutic target for CRPC. The transcript levels of DHODH were significantly elevated in prostate tumors and were negatively correlated with the prognosis of patients with prostate cancer. DHODH inhibition effectively suppressed CRPC progression by blocking cell cycle progression and inducing apoptosis. Notably, treatment with DHODH inhibitor BAY2402234 activated androgen biosynthesis signaling in CRPC cells. However, the combination treatment with BAY2402234 and abiraterone decreased intratumoral testosterone levels and induced apoptosis, which inhibited the growth of CWR22Rv1 xenograft tumors and patient-derived xenograft organoids. Taken together, these results establish DHODH as a key player in CRPC and as a potential therapeutic target for advanced prostate cancer.

A novel approach on designing ultrahigh burnup metallic TWR fuels: Upsetting the current technological limits.

Abstract: The grand challenge of "net-zero carbon" emission calls for technological breakthroughs in energy production. The traveling wave reactor (TWR) is designed to provide economical and safe nuclear power and solve imminent problems, including limited uranium resources and radiotoxicity burdens from back-end fuel reprocessing/disposal. However, qualification of fuels and materials for TWR remains challenging and it sets an "end of the road" mark on the route of R&D of this technology. In this article, a novel approach is proposed to maneuver reactor operations and utilize high-temperature transients to mitigate the challenges raised by envisioned TWR service environment. Annular U-50Zr fuel and oxidation dispersion strengthened (ODS) steels are proposed to be used instead of the current U-10Zr and HT-9 ferritic/martensitic steels. In addition, irradiation-accelerated transport of Mn and Cr to the cladding surface to form a protective oxide layer as a self-repairing mechanism was discovered and is believed capable of mitigating long-term corrosion. This work represents an attempt to disruptively overcome current technological limits in the TWR fuels. Impact statement: After the Fukushima accident in 2011, the entire nuclear industry calls for a major technological breakthrough that addresses the following three fundamental issues: (1) Reducing spent nuclear fuel reprocessing demands, (2) reducing the probability of a severe accident, and (3) reducing the energy production cost per kilowatt-hour. An inherently safe and ultralong life fast neutron reactor fuel form can be such one stone that kills the three birds. In light of the recent development findings on U-50Zr fuels, we hereby propose a disruptive, conceptual metallic fuel design that can serve the following purposes at the same time: (1) Reaching ultrahigh burnup of above 40% FIMA, (2) possessing strong inherent safety features, and (3) extending current limits on fast neutron irradiation dose to be far beyond 200 dpa. We believe that this technology will be able to bring about revolutionary changes to the nuclear industry by significantly lowering the operational costs as well as improving the reactor system safety to a large extent. Supplementary information: The online version contains supplementary material available at 10.1557/s43577-022-00420-4.

A strategy of heterogeneous polyurethane-based sponge for water purification: Combination of superhydrophobicity and photocatalysis to conduct oil/water separation and dyes degradation.

The diffusion of stubborn oils and organic pigments has become a severe environmental pollution problem. Promisingly, the combination of superhydrophobicity and photocatalysis is expected to provide an efficient, economical and simple solution. In this paper, a kind of superhydrophobic and super-lipophilicity polyurethane (PU)-based sponge was reported by a strategy of undergoing ferric tetroxide loading (Fe3O4@PU), polydopamine fixation (PDA-Fe3O4@PU), octadecylamine grafting (ODA-Fe3O4@PU) and molybdenum disulfide loading (MoS2-ODA-Fe3O4@PU) successively. The results show that the MoS2-ODA-Fe3O4@PU sponge exhibits outstanding superhydrophobicity (with maximum water contact angle of 161.64°), excellent oil absorption capacity (60-109 wt/wt), robust stability in extreme environments and great oil/water separation ability. In addition, the MoS2-loaded sponge demonstrates desirable outcomes in decomposing methyl orange and methylene blue under light source, and a dual-functional purification system with a heterogeneous polyurethane-based sponge (the upper part is MoS2-ODA-Fe3O4@PU and the bottom part is MoS2@PU) endowed with superhydrophobicity and photocatalysis can purify water by separating oils and decomposing methylene blue simultaneously.

A SMOC2 variant inhibits BMP signaling by competitively binding to BMPR1B and causes growth plate defects.

Endochondral ossification is the major process of long bone formation, and chondrogenesis is the final step of this process. Several studies have indicated that bone morphogenetic proteins (BMPs) are required for chondrogenesis and regulate multiple growth plate features. Abnormal BMP pathways lead to growth plate defects, resulting in osteochondrodysplasia. The SPARC-related modular calcium binding 2 (SMOC2) gene encodes an extracellular protein that is considered to be an antagonist of BMP signaling. In this study, we generated a mouse model by knocking-in the SMOC2 mutation (c.1076 T > G), which showed short-limbed dwarfism, reduced, disorganized, and hypocellular proliferative zones and expanded hypertrophic zones in tibial growth plates. To determine the underlying pathophysiological mechanism of SMOC2 mutation, we used knock-in mice to investigate the interaction between SMOC2 and the BMP-SMAD1/5/9 signaling pathway in vivo and in vitro. Eventually, we found that mutant SMOC2 could not bind to COL9A1 and HSPG. Furthermore, mutant SMOC2 inhibited BMP signaling by competitively binding to BMPR1B, which lead to defects in growth plates and short-limbed dwarfism in knock-in mice.

Antithermal Quenching of Luminescence in Zero-Dimensional Hybrid Metal Halide Solids.

Zero-dimensional (0D) hybrid metal halides have emerged as a new generation of luminescent phosphors owing to their high radiative recombination rates, which, akin to their three-dimensional cousins, commonly demonstrate thermal quenching of luminescence. Here, we report on the finding of antithermal quenching of luminescence in 0D hybrid metal halides. Using (C9NH20)2SnBr4 single crystals as an example system, we show that 0D metal halides can demonstrate antithermal quenching of luminescence. A combination of experimental characterizations and first-principles calculations suggests that antithermal quenching of luminescence is associated with trap states introduced by structural defects in (C9NH20)2SnBr4. Importantly, we find that antithermal quenching of luminescence is not only limited to (C9NH20)2SnBr4 but also exists in other 0D metal halides. Our work highlights the important role of defects in impacting photophysical properties of hybrid metal halides and may stimulate new efforts to explore metal halides exhibiting antithermal quenching of luminescence at higher temperatures.

Lateral 2D WSe2 p-n Homojunction Formed by Efficient Charge-Carrier-Type Modulation for High-Performance Optoelectronics.

As unique building blocks for next-generation optoelectronics, high-quality 2D p-n junctions based on semiconducting transition metal dichalcogenides (TMDs) have attracted wide interest, which are urgent to be exploited. Herein, a novel and facile electron doping of WSe2 by cetyltrimethyl ammonium bromide (CTAB) is achieved for the first time to form a high-quality intramolecular p-n junction with superior optoelectronic properties. Efficient manipulation of charge carrier type and density in TMDs via electron transfer between Br- in CTAB and TMDs is proposed theoretically by density functional theory (DFT) calculations. Compared with the intrinsic WSe2 photodetector, the switching light ratio (Ilight /Idark ) of the p-n junction device can be enhanced by 103 , and the temporal response is also dramatically improved. The device possesses a responsivity of 30 A W-1 , with a specific detectivity of over 1011 Jones. In addition, the mechanism of charge transfer in CTAB-doped 2D WSe2 and WS2 are investigated by designing high-performance field effect transistors. Besides the scientific insight into the effective manipulation of 2D materials by chemical doping, this work presents a promising applicable approach toward next-generation photoelectronic devices with high efficiency.

Role of Halogen Atoms on High-Efficiency Mn2+ Emission in Two-Dimensional Hybrid Perovskites.

Doped halide pervoskites as highly efficient light emitters have recently fascinated the research community, while the influence of halogen atoms X (X = Cl, Br, I) on the hybrid energy levels and photoluminescence properties remains a challenge. Here, the role of X compositions in the two-dimensional hybrid perovskite BA2PbX4 (BA = C4H9NH3) on the doped Mn2+ emission is identified, wherein Mn2+ reveals a strong luminescence dependence on the nature of the halogen, and optimum Mn2+ emission with a record quantum yield of 60.1% has been achieved in BA2PbBr4. Density functional theory calculations show that BA2PbBr4 holds low Br vacancy concentration and unique coupled states of the Mn-3d level and Pb-6p level at the conduction band minimum, leading to efficient energy transfer from the host to Mn2+. Our work sheds new light on the methods to realize strong exciton-dopant exchange coupling for achieving high-efficiency dopant luminescence.

Investigating the interlayer electron transport and its influence on the whole electric properties of black phosphorus.

Two-dimensional (2D) nanomaterials have attracted great attention in next generation electronic and optoelectronic technologies due to the unique layered structure and excellent physical and chemical properties. However, the mechanism of transmission along the vertical direction of 2D semiconductor materials has not been investigated. Here, we use first-principles calculations to explore the bandgap energies along different directions, and fabricate a vertical, a lateral and a mixture-structured black phosphorus field effect transistor (BPFET) to study the electrical characteristics along different directions under variable temperatures. The variable temperature test indicates that the mixture-structured device performs more like a lateral device, while the conductance along the vertical direction is hard to be tuned by temperature and electrical field. The unchanged conductance under electric field and variable temperatures allows the vertical device to act as a fixed resistor, promising possible application for the prospective electronic and optoelectronic devices.

X-ray-activated long persistent phosphors featuring strong UVC afterglow emissions.

Phosphors emitting visible and near-infrared persistent luminescence have been explored extensively owing to their unusual properties and commercial interest in their applications such as glow-in-the-dark paints, optical information storage, and in vivo bioimaging. However, no persistent phosphor that features emissions in the ultraviolet C range (200-280 nm) has been known to exist so far. Here, we demonstrate a strategy for creating a new generation of persistent phosphor that exhibits strong ultraviolet C emission with an initial power density over 10 milliwatts per square meter and an afterglow of more than 2 h. Experimental characterizations coupled with first-principles calculations have revealed that structural defects associated with oxygen introduction-induced anion vacancies in fluoride elpasolite can function as electron traps, which capture and store a large number of electrons triggered by X-ray irradiation. Notably, we show that the ultraviolet C afterglow intensity of the yielded phosphor is sufficiently strong for sterilization. Our discovery of this ultraviolet C afterglow opens up new avenues for research on persistent phosphors, and it offers new perspectives on their applications in terms of sterilization, disinfection, drug release, cancer treatment, anti-counterfeiting, and beyond.

Doping-Enhanced Short-Range Order of Perovskite Nanocrystals for Near-Unity Violet Luminescence Quantum Yield.

All-inorganic perovskite nanocrystals (NCs) have emerged as a new generation of low-cost semiconducting luminescent system for optoelectronic applications. The room-temperature photoluminescence quantum yields (PLQYs) of these NCs in the green and red spectral range approach unity. However, their PLQYs in the violet are much lower, and an insightful understanding of such poor performance remains missing. We report a general strategy for the synthesis of all-inorganic violet-emitting perovskite NCs with near-unity PLQYs through engineering local order of the lattice by nickel ion doping. A broad range of experimental characterizations, including steady-state and time-resolved luminescence spectroscopy, X-ray absorption spectra, and magic angle spinning nuclear magnetic resonance spectra, reveal that the low PLQY in undoped NCs is associated with short-range disorder of the lattice induced by intrinsic defects such as halide vacancies and that Ni doping can substantially eliminate these defects and result in increased short-range order of the lattice. Density functional theory calculations reveal that Ni doping of perovskites causes an increase of defect formation energy and does not introduce deep trap states in the band gap, which is suggested to be the main reason for the improved local structural order and near-unity PLQY. Our ability to obtain violet-emitting perovskite NCs with near-perfect properties opens the door for a range of applications in violet-emitting perovskite-based devices such as light-emitting diodes, single-photon sources, lasers, and beyond.

Cs4PbBr6/CsPbBr3 Perovskite Composites with Near-Unity Luminescence Quantum Yield: Large-Scale Synthesis, Luminescence and Formation Mechanism, and White Light-Emitting Diode Application.

All-inorganic perovskites have emerged as a new class of phosphor materials owing to their outstanding optical properties. Zero-dimensional inorganic perovskites, in particular the Cs4PbBr6-related systems, are inspiring intensive research owing to the high photoluminescence quantum yield (PLQY) and good stability. However, synthesizing such perovskites with high PLQYs through an environment-friendly, cost-effective, scalable, and high-yield approach remains challenging, and their luminescence mechanisms has been elusive. Here, we report a simple, scalable, room-temperature self-assembly strategy for the synthesis of Cs4PbBr6/CsPbBr3 perovskite composites with near-unity PLQY (95%), high product yield (71%), and good stability using low-cost, low-toxicity chemicals as precursors. A broad range of experimental and theoretical characterizations suggest that the high-efficiency PL originates from CsPbBr3 nanocrystals well passivated by the zero-dimensional Cs4PbBr6 matrix that forms based on a dissolution-crystallization process. These findings underscore the importance in accurately identifying the phase purity of zero-dimensional perovskites by synchrotron X-ray technique to gain deep insights into the structure-property relationship. Additionally, we demonstrate that green-emitting Cs4PbBr6/CsPbBr3, combined with red-emitting K2SiF6:Mn4+, can be used for the construction of WLEDs. Our work may pave the way for the use of such composite perovskites as highly luminescent emitters in various applications such as lighting, displays, and other optoelectronic and photonic devices.

Transformation of Perovskite BaBiO3 into Layered BaBiO2.5 Crystals Featuring Unusual Chemical Bonding and Luminescence.

Engineering oxygen coordination environments of cations in oxides has received intense interest thanks to the opportunities for the discovery of novel oxides with unusual properties. Herein, the synthesis of stoichiometric layered BaBiO2.5 by a nontopotactic phase transformation of perovskite BaBiO3 is presented. By analyzing the synchrotron X-ray diffraction data by the maximum-entropy method/Rietveld technique, it was found that Bi is involved in an unusual chemical bonding situation with four oxygen atoms featuring one ionic bond and three covalent bonds, which results in an asymmetric coordination geometry. Photophysical characterization revealed that this peculiar structure shows near-infrared luminescence differing from that of conventional Bi-containing compounds. Experimental and theoretical results led to the proposal of an excitonic nature of the luminescence. This work highlights that synthesizing materials with uncommon Bi-O bonding and Bi coordination geometry provides a pathway to the discovery of systems with new functionalities. This could inspire interest in the exploration of a range of materials containing heavier p-block elements with prospects for finding systems with unusual properties.

Epitaxial Templating of Two-Dimensional Metal Chloride Nanocrystals on Monolayer Molybdenum Disulfide.

We demonstrate the formation of ionic metal chloride (CuCl) two-dimensional (2D) nanocrystals epitaxially templated on the surface of monolayer molybdenum disulfide (MoS2). These 2D CuCl nanocrystals are single atomic planes from a nonlayered bulk CuCl structure. They are stabilized as a 2D monolayer on the surface of the MoS2 through interactions with the uniform periodic surface of the MoS2. The heterostructure 2D system is studied at the atomic level using aberration-corrected transmission electron microscopy at 80 kV. Dynamics of discrete rotations of the CuCl nanocrystals are observed, maintaining two types of preferential alignments to the MoS2 lattice, confirming that the strong interlayer interactions drive the stable CuCl structure. Strain maps are produced from displacement maps and used to track real-time variations of local atomic bonding and defect production. Density functional theory calculations interpret the formation of two types of energetically advantageous commensurate superlattices via strong chemical bonds at interfaces and predict their corresponding electronic structures. These results show how vertical heterostructured 2D nanoscale systems can be formed beyond the simple assembly of preformed layered materials and provide indications about how different 2D components and their interfacial coupling mode could influence the overall property of the heterostructures.

Biexciton Formation in Bilayer Tungsten Disulfide.

Monolayer transition metal dichalcogenides (TMDs) are direct band gap semiconductors, and their 2D structure results in large binding energies for excitons, trions, and biexcitons. The ability to explore many-body effects in these monolayered structures has made them appealing for future optoelectronic and photonic applications. The band structure changes for bilayer TMDs with increased contributions from indirect transitions, and this has limited similar in-depth studies of biexcitons. Here, we study biexciton emission in bilayer WS2 grown by chemical vapor deposition as a function of temperature. A biexciton binding energy of 36 ±4 meV is measured in the as-grown bilayer WS2 containing 0.4% biaxial strain as determined by Raman spectroscopy. The biexciton emission was difficult to detect when the WS2 was transferred to another substrate to release the stain. Density functional theory calculations show that 0.4% of tensile strain lowers the direct band gap by about 55 meV without significant change to the indirect band gap, which can cause an increase in the quantum yield of direct exciton transitions and the emission from biexcitons formed by two direct gap excitons. We find that the biexciton emission decreases dramatically with increased temperature due to the thermal dissociation, with an activation energy of 26 ± 5 meV. These results show how strain can be used to tune the many-body effects in bilayered TMD materials and extend the photonic applications beyond pure monolayer systems.

Effect on Electron Structure and Magneto-Optic Property of Heavy W-Doped Anatase TiO2.

The spin or nonspin state of electrons in W-doped anatase TiO2 is very difficult to judge experimentally because of characterization method limitations. Hence, the effect on the microscopic mechanism underlying the visible-light effect of W-doped anatase TiO2 through the consideration of electronic spin or no-spin states is still unknown. To solve this problem, we establish supercell models of W-doped anatase TiO2 at different concentrations, followed by geometry optimization and energy calculation based on the first-principle planewave norm conserving pseudo-potential method of the density functional theory. Calculation results showed that under the condition of nonspin the doping concentration of W becomes heavier, the formation energy becomes greater, and doping becomes more difficult. Meanwhile, the total energy increases, the covalent weakens and ionic bonds strengthens, the stability of the W-doped anatase TiO2 decreases, the band gap increases, and the blue-shift becomes more significant with the increase of W doping concentration. However, under the condition of spin, after the band gap correction by the GGA+U method, it is found that the semimetal diluted magnetic semiconductors can be formed by heavy W-doped anatase TiO2. Especially, a conduction electron polarizability of as high as near 100% has been found for the first time in high concentration W-doped anatase TiO2. It will be able to be a promising new type of dilute magnetic semiconductor. And the heavy W-doped anatase TiO2 make the band gap becomes narrower and absorption spectrum red-shift.

Synthesis, crystal structure and photoluminescence of a cyclometalated Iridium(III) coumarin complex.

In this paper a new cyclometalated iridium(III) coumarin complex, Ir(III)bis(3-(2-benzothiazolyl)coumarinato N,C(4))(acetylacetonate) (Ir(L)2(acac)), was synthesized and characterized. X-ray crystallography demonstrated that the iridium(III) ion is hexacoordinated by two C atoms and two N atoms from 3-(2-benzothiazolyl)coumarinato ligands and two O atoms from acac ligand, displaying distorted octahedral coordination geometry. The Ir(L)2(acac) complex has good thermal stability with less than 2 % weight-reduction occurring at 300 °C, and exhibits strong reddish orange emission. The results shown that Ir(L)2(acac) is useful for fabrication organic light-emitting diodes.

Expression profiling reveals altered satellite cell numbers and glycolytic enzyme transcription in nemaline myopathy muscle.

The nemaline myopathies (NMs) are a clinically and genetically heterogeneous group of disorders characterized by nemaline rods and skeletal muscle weakness. Mutations in five sarcomeric thin filament genes have been identified. However, the molecular consequences of these mutations are unknown. Using Affymetrix oligonucleotide microarrays, we have analyzed the expression patterns of >21,000 genes and expressed sequence tags in skeletal muscles of 12 NM patients and 21 controls. Multiple complementary approaches were used for data analysis, including geometric fold analysis, two-tailed unequal variance t test, hierarchical clustering, relevance network, and nearest-neighbor analysis. We report the identification of high satellite cell populations in NM and the significant down-regulation of transcripts for key enzymes of glucose and glycogen metabolism as well as a possible regulator of fatty acid metabolism, UCP3. Interestingly, transcript level changes of multiple genes suggest possible changes in Ca(2+) homeostasis. The increased expression of multiple structural proteins was consistent with increased fibrosis. This comprehensive study of downstream molecular consequences of NM gene mutations provides insights in the cellular events leading to the NM phenotype.