Biomimetic Leaf-Shaped Wedge Structure with Mixed Wettability for Fog Harvesting.

Water scarcity is a pressing issue in arid and semi-arid regions, making fog harvesting a promising method for water collection. However, enhancing the rate of fog harvesting remains a challenge. Controlling the movement of droplets on functional surfaces is crucial for the development of effective water-harvesting devices. In this study, a three-dimensional (3D) fog-harvesting device with mixed wettability is fabricated using a combination of physical and chemical techniques. With inspiration drawn from natural organisms, such as the desert beetle and Nephrolepis cordifolia, which can both live in low humidity, a copper substrate with a leaf-shaped wedge superhydrophilic structure and flat superhydrophobic regions is fabricated for fog harvesting. The modified surface results in a maximum 49.89% improvement in fog-harvesting efficiency compared to the original copper substrate. The synergistic effect of the 3D structure and mixed wettability of this study offers an idea for improving fog collection efficiency, with potential implications for energy sustainability water resources.

Locomotion behavior of air bubbles on solid surfaces.

Air bubbles are a common occurrence in both natural and industrial settings and are a significant topic in the fields of physics, chemistry, engineering, and medicine. The physical phenomena of the contact between bubbles and submerged solid surfaces, as well as the locomotion behavior of bubbles, are worth exploring. Bubbles are generated in an unbounded liquid environment and rise due to unbalanced external forces. Bubbles of different diameters follow different ascending paths, after which they approach, touch, collide, bounce, and finally adsorb to the solid surface, forming a stable three-phase contact line (TPCL). The bubbles are in an unstable state due to the unbalanced external forces on the solid surface and the effects generated by the two-phase contact surface, resulting in different locomotion behaviors on the solid surface. Studying the formation, transport, aggregation, and rupture behaviors of bubbles on solid surfaces can enable the controllable operation of bubbles. This, in turn, can effectively reduce the loss of mechanical apparatus in agro-industrial production activities and improve corresponding production efficiency. Recent research has shown that the degree of bubble wetting on a solid surface is a crucial factor in the locomotion behavior of bubbles on that surface. This has led to significant progress in the study of bubble wetting, which has in turn greatly advanced our understanding of bubble behavior. Based on this, exploring the manipulation process of the directional motion of bubbles is a promising research direction. The locomotion behavior of bubbles on solid surfaces can be controlled by changing external conditions, leading to the integration of bubble behavior in various scientific and technological fields. Studying the dynamics of bubbles in liquids with infinite boundaries is worthwhile. Additionally, the manipulation process and mode of these bubbles is a popular research direction.

Biomimetic Fog Collector with Hybrid and Gradient Wettabilities.

Water scarcity is a global problem and collecting water from the air is a viable solution to this crisis. Inspired by Namib Desert beetle, leaf venation and spider silk, we designed an integrated biomimetic system with hybrid wettability and wettability gradient. The hybrid hydrophilic-hydrophobic wettability design that bionomics desert beetle's back can construct a three-dimensional topography with a water layer on the surface, expanding the contact area with the fog flow and thus improving the droplet trapping efficiency. The venation-like structure with wettability gradient not only provides a planned path for water transportation, but also accelerates water removal under the synergistic effect of gravity and wettability driving force, thus further improving the surface regeneration rate. The collector combines droplet capture, coalescence, transportation, separation, and storage capabilities, which provides new ideas for the design of future high-efficiency fog collectors.

Fabricated advanced textile for personal thermal management, intelligent health monitoring and energy harvesting.

Fabrics are soft against the skin, flexible, easily accessible and able to wick away perspiration, to some extent for local private thermal management. In this review, we classify smart fabrics as passive thermal management fabrics and active thermal management fabrics based on the availability of outside energy consumption in the manipulation of heat generation and dissipation from the human body. The mechanism and research status of various thermal management fabrics are introduced in detail, and the article also analyses the advantages and disadvantages of various smart thermal management fabrics, achieving a better and more comprehensive comprehension of the current state of research on smart thermal management fabrics, which is quite an important reference guide for our future research. In addition, with the progress of science and technology, the social demand for fabrics has shifted from keeping warm to improving health and quality of life. E-textiles have potential value in areas such as remote health monitoring and life signal detection. New e-textiles are designed to mimic the skin, sense biological data and transmit information. At the same time, the ultra-moisturizing properties of the fabric's thermal management allow for applications beyond just the human body to energy. E-textiles hold great promise for energy harvesting and storage. The article also introduces the application of smart fabrics in life forms and energy harvesting. By combining electronic technology with textiles, e-textiles can be manufactured to promote human well-being and quality of life. Although smart textiles are equipped with more intelligent features, wearing comfort must be the first thing to be ensured in the multi-directional application of textiles. Eventually, we discuss the dares and prospects of smart thermal management fabric research.

Hydrogel Coated Mesh with Controlled Flux for Oil/Water Separation.

Superwetting surfaces are often applied in oil/water separation. Hydrogels have been widely prepared as superhydrophilic/underwater superoleophobic materials for oil/water separation since they are naturally hydrophilic. Hydrogels usually need to be combined with porous substrates such as stainless steel mesh (SSM) due to their poor mechanical properties. However, it is usually inevitable that the pores of the substrate are clogged during the actual preparation process, leading to a significant decrease in the flux, which limits its effective application. In this study, acrylic acid (AA), chitosan (CS) and modified silica were utilized to form a layer of dual-network PAA/CS@SiO2 hydrogel by photopolymerization on SSM, followed by a simple and novel ultrasonic-assisted pore-making method to generate numerous pores in situ on the surface of the hydrogel-coated mesh, which led to an increase in water flux from 0 to 70,000 L m-2 h-1 without decreasing the separation efficiency. After 100 separations of a mixture of n-hexane and water, the flux was still higher than 50,000 L m-2 h-1 with a separation efficiency above 99%, which is superior to most of hydrogel-coated meshes reported so far. Moreover, the prepared PAA/CS@SiO2 hydrogel-coated mesh also has good environmental stability, low swelling, and self-cleaning properties. We believe that the strategy of this study will provide a simple new perspective when hydrogels block the substrate pores, resulting in low water flux.

Superhydrophobic Surfaces Prepared from Columnar Units by Convenient Electrodeposition with Excellent Mechanical Stability Impact and Corrosion Resistance.

Regular array structures prepared by laser processing and three-dimensional printing have promising applications in building stable superhydrophobic structures. However, the size of the materials processed by these two methods is affected by the size of the processing equipment, which prevents the processing of large-size materials. In this paper, a columnar unit consisting of a spherical structure with similar mechanical stability to the array structure is designed and prepared for metal surface protection. A convenient electrodeposition method was used to deposit a layer of columnar micron-sized copper consisting of spheres on the surface of a 6061 aluminum alloy. Subsequently, modified ZrO2 nanoparticles and polytetrafluoroethylene (PTFE) were sprayed on the surface to form a superhydrophobic surface with synergistic columnar units and ZrO2 (CAZ). The structure was tested and found to have excellent mechanical stability, maintaining the superhydrophobic properties of the surface even after 200 abrasion cycles of 1000-grit sandpaper under a 500 g load. Moreover, the vertical deformation of the CAZ sample under normal pressure was increased by a factor of 4 compared to the original substrate. Importantly, in subsequent corrosion resistance tests, the CAZ samples showed a two-order-of-magnitude improvement in self-corrosion current density and impedance modulus at low frequencies compared to the original substrate. This strategy is an effective method for preparing mechanically stable superhydrophobic structures that are low-cost and large enough to provide long-term protection for metal surfaces. It is particularly suitable for surface protection of instruments and automotive chassis armor.

Low-Friction Soft Robots for Targeted Bacterial Infection Treatment in Gastrointestinal Tract.

Untethered and self-transformable miniature robots are capable of performing reconfigurable deformation and on-demand locomotion, which aid the traversal toward various lumens, and bring revolutionary changes for targeted delivery in gastrointestinal (GI) tract. However, the viscous non-Newtonian liquid environment and plicae gastricae obstacles severely hamper high-precision actuation and payload delivery. Here, we developed a low-friction soft robot by assembly of densely arranged cone structures and grafting of hydrophobic monolayers. The magnetic orientation encoded robot can move in multiple modes, with a substantially reduced drag, terrain adaptability, and improved motion velocity across the non-Newtonian liquids. Notably, the robot stiffness can be reversibly controlled with magnetically induced hardening, enabling on-site scratching and destruction of antibiotic-ineradicable polymeric matrix in biofilms with a low-frequency magnetic field. Furthermore, the magnetocaloric effect can be utilized to eradicate the bacteria by magnetocaloric effect under high-frequency alternating field. To verify the potential applications inside the body, the clinical imaging-guided actuation platforms were developed for vision-based control and delivery of the robots. The developed low-friction robots and clinical imaging-guided actuation platforms show their high potential to perform bacterial infection therapy in various lumens inside the body.

Biomimetic Aerogel Composite for Atmospheric Water Harvesting.

Adsorption-based atmospheric water harvesting (AWH) with solar-driven photothermal desorption has become an effective means of solving freshwater scarcity in arid regions due to its low energy consumption and high efficiency. Moisture adsorption and desorption capacities are the most critical properties in AWH, and it is a challenge to improve the rate of moisture adsorption and desorption of composite adsorbents. Therefore, this paper reports a SA/carboxymethyl chitosan (CCS)/C/CaCl2-U composite aerogel adsorbents with simultaneously green, low-cost, degradable, and fast hygroscopicity and desorption kinetics. The composite adsorbent used water-soluble biomass materials sodium alginate (SA) and carboxymethyl chitosan (CCS) as the backbone of the aerogel, constructed a vertically aligned unidirectional pore structure by directional freezing, and introduced nanocarbon powder and moisture-absorbent salt calcium chloride (CaCl2) to improve the solar photothermal performance and water absorption, respectively. The results showed that the composite adsorbent had good water uptake capacity at 30-90% relative humidity (RH), the time to reach the water uptake of 1 g g-1 at 90% RH was only 2.5 h, and the final water uptake rate was up to 1.9 g g-1 within 12 h. Meanwhile, the composite sorbent can be heated and desorbed basically within 1 h at 80 °C and its evaporation efficiency is 1.3 times higher than that of the aerogel sorbent prepared by the conventional method when irradiated with 1000 W m-2 light intensity for 2 h. Therefore, the SA/CCS/C/CaCl2-U composite aerogel adsorbent of this study has a potential that can be applied in AWH due to its environmental friendliness, low cost, and faster hygroscopic desorption kinetics.

Synergistic Construction of Superhydrophilic PVDF Membranes by Dual Modification Strategies for Efficient Emulsion Separation.

Solving the problem of oil and water pollution is an important topic in environmental protection. The separation of oil-water emulsion with high efficiency and low consumption has been the direction of social efforts. Membrane separation technology combined with surface wettability and pore size screening is considered to be one of the most promising ways to separate oil-water emulsions. In this paper, the polyvinylidene difluoride (PVDF) membrane is prepared by combining the two methods of blending and coating modification as a double barrier. The prepared PVDF membrane can completely wet water, achieve superhydrophilic in air, and superoleophobic underwater. The separation efficiency and flux are 99.57% and 678 L h-1 m-2 bar-1, respectively, for toluene emulsions containing surfactants with an average particle size of 1.7 µm. At the same time, it can also effectively separate different kinds of light/heavy oils. After three cycles of testing still maintain high efficiency of separation. The results show that the prepared PVDF membrane can effectively separate the emulsion containing surfactant with smaller particle size distribution of oil droplets. This method provides a new strategy for the separation of oil-water emulsions and has broad application prospects.

Improved Fog Collection on a Hybrid Surface with Acylated Cellulose Coating.

Fog collection serves as an efficient method to alleviate water scarcity in foggy, water-stressed regions. Recent research has focused on constructing a hybrid surface to enhance fog collection efficiency, with one approach being the prevention of liquid film formation at hydrophilic sites. Inspired by the desert beetle, a coating (10-MCC) made by partially acylating microcrystalline cellulose (MCC) exhibits hydrophilic sites alongside a hydrophobic skeleton enabling rapid droplet capture despite its overall hydrophobicity. The captured droplets quickly coalesce into a large droplet driven by the wetting gradient created by the hydrophobic backbone and hydrophilic sites. To achieve greater fog collection efficiency, a hydrophobic-superhydrophobic hybrid surface is formed by combining a coating of 10-MCC with a superhydrophobic surface. The construction of superhydrophobic surfaces typically involves creating a rough surface with a distinctive structure produced by the anodization technique and modifying it with stearic acid. The superhydrophobic surface exhibits excellent corrosion resistance and mechanical stability. Moreover, the hybrid surface shows high efficiency in fog collection, with a tested maximum efficiency of approximately 1.5092 g/cm2/h, 1.77 times that of the original Al sheets. The results demonstrate a remarkable enhancement in fog collection capacity. Furthermore, this work serves as an inspiration for the low-cost and innovative design of engineered surfaces for efficient fog collection.

Biomimetic Superwetting Fabric for Evaporation-Induced Body Sweat and Heat Management and Electricity Generation.

Solar optothermal evaporation of water possesses the potential for thermal regulation and electricity generation, which are desirable for regulating body perspiration and heat as well as improving electrical output and strain sensing. However, ordinary fabrics exhibit poor evaporation capacity and antifouling performance due to limited adsorption capacity and internal hydrophilicity. Moreover, conventional evaporation-driven generators show a low power supply without widely practical use due to limited and fluctuating evaporation rates. Herein, an antifouling cooling fabric with an evaporation-driven electricity performance is obtained by constructing Janus channels on the superomniphobic fabric. Sweat can be easily eliminated from inside to outside through Janus channels by efficient evaporation, and the green liquid metal ink (CGM/LMP-rGO@PPy) cotton fabric shows a thermal conductivity of 0.18 W m-1 K-1, suggesting a comfortable dry and cooling sense. Meanwhile, the fabric can stably output a potential of 302.20 mV when seawater flows through the ionic channels at an evaporation rate of 1.58 mL h-1 with one sun power density. In addition, the multifunctional fabric demonstrates strain sensing at high electrical conductivity for body motion monitoring. This work would offer a prospect for intelligent textile construction and energy harvesting by water evaporation.

Superhydrophobic Bulgy Windmill for Synchronous Efficient Fog Collection and Power Generation.

The shortage of freshwater resources is a serious problem faced by mankind in the 21st century. To maximize the acquisition of freshwater resources, numerous fog collectors have been constructed. In the process of fog collection accompanied by the movement of the wind, the mechanical energy brought about by the wind is often ignored. Based on this, inspired by beetles and origami art, we designed a windmill installation with a bump on the edge. Droplets nucleate at the windmill bulge and accelerate the transport process under the action of centrifugal force. This leads to quick fog collection and reduces the secondary evaporation rate of freshwater resources. The fog collection efficiency can reach 2.8 times that of the original sample. Moreover, the windmill can convert mechanical energy into electricity while collecting fog, and the operating voltage of a single windmill can reach 0.85 V. After the array, the amount of fog collected by the windmill and the power generation voltage can be increased by multiple times, which realizes the efficient use of energy and provides a new idea for the design of an efficient fog collector in the future.

Underwater Bubble Manipulation on Surfaces with Patterned Regions with Infused Lubricants.

The flexible manipulation of underwater gas bubbles on solid substrates has attracted considerable research interest from scientists in the fields of water electrolysis, bubble microreactions, drug delivery, and heat transfer. Inspired by the oxygen-binding mechanisms of aquatic organisms, scientists have designed a series of interfacial materials for use in collecting gases, detecting and grading bubbles, and conducting microbubble reactions. Aerophilic surfaces are commonly used in underwater bubble manipulation platforms due to their excellent gas-trapping properties. However, during bubble transport, some of the bubbles are retained in the rough structure of the aerophilic surface and cause gas loss, which in the long run reduces the gas transport function. In addition, the aerophilic surface is prone to failure in high-humidity and high-pressure underwater environments. The lubricant-infused surface features an oil layer that remains stable on a rough substrate and is immiscible with water. Additionally, the bubbles are transported over the oil layer without causing losses other than those dissolved in water. These attributes make it more favorable than the aerophilic surface. Inspired by the unique properties of Nepenthes and cactus spines, we developed a patterned slippery surface [patterned lubricant-infused surface (PLIS)] through laser etching and ammonia etching that facilitates the coexistence of superaerophobic and aerophilic surfaces. The PLIS executes bubble capture utilizing a difference in wettability measuring 78°, transports bubbles through Laplace force and buoyancy, and regulates bubble release by restricting the contact area on the PLIS. The PLIS can be prepared rapidly and affordably in just about an hour, and its potential for large-scale production is high. Following tests for shear, acid and alkali resistance, and corrosion resistance, the PLIS exhibited impressive weathering resistance and appears to have potential for application in some extreme environments.

Bubble Unidirectional Transportation on Multipath Aerophilic Surfaces by Adjusting the Surface Microstructure.

Comprehending and controlling the behavior of bubbles on solid surfaces is of significant importance in various fields including catalysis and drag reduction, both industrially and scientifically. Herein, Inspired by the superaerophilic properties of the lotus leaf surface, a series of asymmetrically patterned aerophilic surfaces were prepared by utilizing a facile mask-spraying method for directional transport of underwater bubbles. The ability of bubbles to undergo self-driven transportation in an asymmetric pattern is attributed to the natural tendency of bubbles to move toward regions with lower surface energy. In this work, the microstructure of the aerophilic surface is demonstrated as a critical element that influences the self-driven transport of bubbles toward regions of lower surface energy. The microstructure characteristic affects the energy barrier of forming a continuous gas film on the final regions. We classify three distinct bubble behaviors on the aerophilic surface, which align with three different underwater gas film evolution states: Model I, Model II, and Model III. Furthermore, utilizing the energy difference between the energy barrier that forms a continuous gas film and the gas-gas merging, gas-liquid microreaction in a specific destination on the multiple paths can be easily realized by preinjecting a bubble in the final region. This work provides a new view of the microevolutionary process for the diffusion, transport, and merging behavior of bubbles upon contact with an aerophilic pattern surface.

The antifouling mechanism and application of bio-inspired superwetting surfaces with effective antifouling performance.

With the rapid development of industries, the issue of pollution on Earth has become increasingly severe. This has led to the deterioration of various surfaces, rendering them ineffective for their intended purposes. Examples of such surfaces include oil rigs, seawater intakes, and more. A variety of functional surface techniques have been created to address these issues, including superwetting surfaces, antifouling coatings, nano-polymer composite materials, etc. They primarily exploit the membrane's surface properties and hydration layer to improve the antifouling property. In recent years, biomimetic superwetting surfaces with non-toxic and environmental characteristics have garnered massive attention, greatly aiding in solving the problem of pollution. In this work, a detailed presentation of antifouling superwetting materials was made, including superhydrophobic surface, superhydrophilic surface, and superhydrophilic/underwater superoleophobic surface, along with the antifouling mechanisms. Then, the applications of the superwetting antifouling materials in antifouling domain were addressed in depth.

The Challenge of Superhydrophobicity: Environmentally Facilitated Cassie-Wenzel Transitions and Structural Design.

Superhydrophobic materials can be used in various fields to optimize production and life due to their unique surface wetting properties. However, under certain pressure and perturbation conditions, the droplets deposited on superhydrophobic materials are prone to change from Cassie state to Wenzel state, which limits the practical applications of the materials. In recent years, a large number of works have investigated the transition behavior, transition mechanism, and influencing factors of the wetting transition that occurs when a superhydrophobic surface is under a series of external environments. Based on these works, in this paper, the phenomenon and kinetic behavior of the destruction of the Cassie state and the mechanism of the wetting transition are systematically summarized under external conditions that promote the wetting transition on the material surface, including pressure, impact, evaporation, vibration, and electric wetting. In addition, superhydrophobic surface morphology has been shown to directly affect the duration of the Cassie state. Based on the published work the effects of specific morphology on the Cassie state, including structural size, structural shape, and structural level, are summarized in this paper from theoretical analyses and experimental data.

Strain-Induced Defect Evolution for the Construction of Porous Cu2-xSe with Enhanced Thermoelectric Performance.

Superionic Cu2-xSe, with disordered and even liquid-like Cu ions, has been extensively studied as a high efficiency thermoelectric material. However, the relationship between lattice stability and microstructure evolution in Cu2-xSe under strain, which is crucial for its application, has seldom been explored in previous research. In this study, we investigate the impacts of hydrostatic compression strain on the microstructural evolution and, consequently, its implications for thermoelectric performance. Molecular dynamics (MD) simulations show that high hydrostatic compression strain could induce local diffusion of Cu ions and Se twin evolution, resulting in the breaking and reforming of Cu-Se dynamic bonds and the unstable Se sublattice. The subsequent annealing process of the destabilized structure promoted Se evaporation from the sublattice and resulted in lotus-seedpod-like pores. The reduced sound velocity and intensified phonon scattering, due to pores, lead to a reduction in the lattice thermal conductivity from 0.44 W m-1 K-1 to 0.24 W m-1 K-1 at 800 K, a decrease of approximately 45%, in the porous Cu1.92Se sample. These findings reveal the relationship between stability and defect evolution in Cu2-xSe under high hydrostatic compression, offering a straightforward strategy of defect engineering for designing unique microstructures by leveraging the instability in superionic conductor materials.

Exploring lncRNAs associated with human pancreatic islet cell death induced by transfer of adoptive lymphocytes in a humanized mouse model.

Background: Long noncoding RNA (lncRNA)-mediated posttranscriptional and epigenetic landscapes of gene regulation are associated with numerous human diseases. However, the regulatory mechanisms governing human ß-cell function and survival remain unknown. Owing to technical and ethical constraints, studying the direct role of lncRNAs in ß-cell function and survival in humans in vivo is difficult. Therefore, we utilized humanized mice with human islets to investigate lncRNA expression using whole transcriptome shotgun sequencing. Our study aimed to characterize lncRNAs that may be crucial for human islet cell function and survival. Methods: Human ß-cell death was induced in humanized mice engrafted with functional human islets. Using these humanized mice harboring human islets with induced ß-cell death, we investigated lncRNA expression through whole transcriptome shotgun sequencing. Additionally, we systematically identified, characterized, and explored the regulatory functions of lncRNAs that are potentially important for human pancreatic islet cell function and survival. Results: Human islet cell death was induced in humanized mice engrafted with functional human islets. RNA sequencing analysis of isolated human islets, islet grafts from humanized mice with and without induced cell death, revealed aberrant expression of a distinct set of lncRNAs that are associated with the deregulated mRNAs important for cellular processes and molecular pathways related to ß-cell function and survival. A total of 10 lncRNA isoforms (SCYL1-1:22, POLG2-1:1, CTRB1-1:1, SRPK1-1:1, GTF3C5-1:1, PPY-1:1, CTRB1-1:5, CPA5-1:1, BCAR1-2:1, and CTRB1-1:4) were identified as highly enriched and specific to human islets. These lncRNAs were deregulated in human islets from donors with different BMIs and with type 2 diabetes (T2D), as well as in cultured human islets with glucose stimulation and induced cell death induced by cytokines. Aberrant expression of these lncRNAs was detected in the exosomes from the medium used to culture islets with cytokines. Conclusion: Islet-enriched and specific human lncRNAs are deregulated in human islet grafts and cultured human islets with induced cell death. These lncRNAs may be crucial for human ß-cell function and survival and could have an impact on identifying biomarkers for ß-cell loss and discovering novel therapeutic targets to enhance ß-cell function and survival.

Droplet Manipulation on Lubricant Self-Mediating Slippery PDMS Films.

Further exploration is needed for sustainable and precise droplet manipulation on intelligent surfaces, especially the problem of SLIPS failure caused by lubricant loss. In this work, a self-mediating photothermal lubrication surface was designed. Through a simple preparation method, it was possible to generate a new lubrication layer through near-infrared light (NIL) and perform sustainable and precise droplet manipulation even after the surface lubricant was consumed. The thermal expansion film obtained from polydimethylsiloxane (PDMS) and nano ferric oxide, combined with the connected structure obtained through laser etching technology, effectively preserve lubricating oil. After the surface lubricating oil is consumed, under the action of NIL, the lubricating oil inside the film is squeezed out, forming a new lubricating layer. At the same time, programmable droplet transport can be achieved by inducing the direction of NIL. After turning off NIL, the lubricating oil is absorbed into the network structure, achieving good circulation. This not only reduces the loss of lubricating oil, but also facilitates the manipulation of droplets. In addition, the movement (plane and antigravity) and splitting behavior of droplets are also discussed. This sustainable and precise manipulation of liquid droplets on the LSSPF (lubricant self-mediating slippery PDMS films) surface can be widely applied in various micro reaction devices.

Transition metal compounds: From properties, applications to wettability regulation.

Transition metal compounds (TMCs) have the advantages of abundant reserves, low cost, non-toxic and pollution-free, and have attracted wide attention in recent years. With the development of two-dimensional layered materials, a new two-dimensional transition metal carbonitride (MXene) has attracted extensive attention due to its excellent physicochemical properties such as gas selectivity, photocatalytic properties, electromagnetic interference shielding and photothermal properties. They are widely used in gas sensors, oil/water separation, wastewater and waste-oil treatment, cancer treatment, seawater desalination, strain sensors, medical materials and some energy storage materials. In this view, we aim to emphatically summarize MXene with their properties, applications and their wettability regulation in different applications. In addition, the properties of transition metal oxides (TMOs) and other TMCs and their wettability regulation applications are also discussed.