To-pack or Not-to-pack: Towards Improved Graphite Electrochemical Oxidation Through Electrode Design.

Fabrication of batch-wise efficient, user- and environmentally-friendly, and well-defined yield methods for the synthesis of graphite oxide, the main precursor to graphene oxide and its reduced derivative, is an essential and robust research field, yet is sparingly investigated or innovated in recent years. This Concept review showcases recent advances in the fabrication of electrochemical set ups that meet aforementioned design parameters, wherein working electrode construction is seen to play a key role in shaping the yield characteristics and aiding the mechanistic understanding of efficiency of adopted methods. Particularly, these advances pave the way for new and various tunable design parameters by fabricating different methods of encapsulating graphite powder instead of using conventional bare monolith forms of graphite as working electrode. Encapsulation geometry, pressure, and matrix material, as well as powder size are examples of such tunable design parameters, absent in the monolith methods. The encapsulation validates authenticity of real-time monitoring of electrochemical intercalation, exfoliation, and oxidation of graphite powder, thereby offering excellent and well-defined control on yield.

Electrochemical Exfoliation of Graphene Oxide: Unveiling Structural Properties and Electrochemical Performance.

An electrochemical exfoliation method for the production of graphene oxide and its characterization by electrochemical techniques are presented here. Graphite rods are used as working electrode in a three-electrode electrochemical cell, and electro-exfoliation is achieved by applying anodic polarization in a sulfuric acid solution. The electrochemical process involved two steps characterized by an intercalation at lower potential and an exfoliation at higher potential. The electrochemical behavior of the produced GO is studied through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). X ray Photoelectronic Spectroscopy (XPS), Raman spectroscopy, Transmission Electron Microscopy (TEM), and Atomic Force Microscopy (AFM) are employed to characterize the structural and chemical properties of the exfoliated GO. The results demonstrate that the electrochemical exfoliation method yields GO materials with varying degrees of oxidation, defect density, and crystallite size, depending on the applied potential and acid concentration. The graphene oxide samples exhibited distinct electrochemical properties, including charge transfer resistance, interfacial capacitance, and relaxation times for the charge transfer, as revealed by CV and EIS measurements with a specifically selected redox probe. The comprehensive characterization performed provides valuable insights into the structure-property relationships of the GO materials synthesized through electrochemical exfoliation of graphite.

Effects of valinomycin doping on the electrical and structural properties of planar lipid bilayers supported on polyelectrolyte multilayers.

Supported Lipid Bilayers (SLBs) on Polyelectrolyte Multilayers (PEMs) have large potential as models for developing sensor devices. SLBs can be designed with receptors and channels, which benefit from the biological environment of the lipid layers, to create a sensing interface for ions and biomarkers. PEMs assembled by the Layer-by-Layer (LBL) technique and used as supports for a lipid bilayer enable an easy integration of the bilayer on almost any surface and device. For electrochemical sensors, LBL assembly enables nanoscale tunable separation of the lipid bilayer from the electrode surface, avoiding undesired effects of the electrode surface on the lipid bilayers. We study the fabrication of valinomycin-doped SLBs on PEMs as a model system for biophysical studies and for selective ion sensing. SLBs are fabricated from dioleoylphosphatidylcholine (DOPC) and dioleoylphosphatidylserine (DOPS) 50:50 vesicles doped with valinomycin, as a K+-selective carrier. SLBs were deposited on electrodes coated with poly(allyl amine hydrochloride) (PAH) and poly(styrene sodium sulfonate) (PSS) multilayers. Lipid bilayer formation was monitored by using Quartz Crystal Microbalance with Dissipation (QCMD) technique and Atomic Force Microscopy (AFM). Electrochemical impedance spectroscopy (EIS) and potentiometric measurements were performed to assess K+ selectivity over other ions and the potential of valinomycin-doped SLBs for K+-sensing.

Gramicidin ion channels in a lipid bilayer supported on polyelectrolyte multilayer films: an electrochemical impedance study.

Supported membranes on polymer cushions are of fundamental interest as models for cell membranes. The use of polyelectrolyte multilayers (PEMs) assembled by the layer by layer (LbL) technique as supports for a bilayer allows for easy integration of the lipid bilayer on surfaces and devices and for nanoscale tunable spacing of the lipid bilayer. Controlling ionic permeability in lipid bilayers supported on PEMs triggers potential applications in sensing and as models for transport phenomena in cell membranes. Lipid bilayers displaying gramicidin channels are fabricated on top of polyallylamine hydrochloride (PAH) and polystyrene sulfonate (PSS) multilayer films, by the assembly of vesicles of phosphatidylcholine and phosphatidylserine, 50 : 50 M/M, carrying gramicidin (GA). Quartz crystal microbalance with dissipation shows that the vesicles with GA fuse into a bilayer. Atomic force microscopy reveals that the presence of GA alters the bilayer topography resulting in depressions in the bilayer of around 70 nm in diameter. Electrochemical impedance spectroscopy (EIS) studies show that supported bilayers carrying GA have smaller resistances than the bilayers without GA. Lipid layers carrying GA display a higher conductance for K+ than for Na+ and are blocked in the presence of Ca2+.

Electrochemical preparation and characterization of polypyrrole/stainless steel electrodes decorated with gold nanoparticles.

The electrosynthesis and characterization of polypyrrole(PPy)/stainless steel electrodes decorated with gold nanoparticles and the performance of the composite electrode for sensing applications is described. PPy films were grown in potassium perchlorate and sodium salicylate solutions under comparable electropolymerization conditions. Polymer films prepared in the presence of perchlorate ions exhibited worm-like structures, whereas columnar structures were obtained in salicylate-containing solutions. Voltammetric response of PPy films prepared in salicylate solutions was more reversible. PPy films were decorated with gold nanoparticles obtained by a double step potentiostatic electrodeposition routine that allowed fine control of deposit characteristics. Analysis of deposits was performed by means of SEM and confocal Raman spectroscopy. The electrocatalytic activity of the Au/PPy electrodes was assessed for the electro-oxidation of hydrazine and hydroxylamine. Results showed a successful optimization of the route of synthesis that rendered nanocomposite electrode materials with promising applications in electrochemical sensing.