Fresnel phasing of segmented mirror telescopes.

Shack-Hartmann (S-H) phasing of segmented telescopes is based upon a physical optics generalization of the geometrical optics Shack-Hartmann test, in which each S-H lenslet straddles an intersegment edge. For the extremely large segmented telescopes currently in the design stages, one is led naturally to very large pupil demagnifications for the S-H phasing cameras. This in turn implies rather small Fresnel numbers F for the lenslets; the nominal design for the Thirty Meter Telescope calls for F=0.6. For such small Fresnel numbers, it may be possible to eliminate the lenslets entirely, replacing them with a simple mask containing a sparse array of clear subapertures and thereby also eliminating a number of manufacturing problems and experimental complications associated with lenslets. We present laboratory results that demonstrate the validity of this approach.

Dual-photoelastic-modulator-based polarimetric imaging concept for aerosol remote sensing.

A dual-photoelastic-modulator- (PEM-) based spectropolarimetric camera concept is presented as an approach for global aerosol monitoring from space. The most challenging performance objective is to measure degree of linear polarization (DOLP) with an uncertainty of less than 0.5% in multiple spectral bands, at moderately high spatial resolution, over a wide field of view, and for the duration of a multiyear mission. To achieve this, the tandem PEMs are operated as an electro-optic circular retardance modulator within a high-performance reflective imaging system. Operating the PEMs at slightly different resonant frequencies generates a beat signal that modulates the polarized component of the incident light at a much lower heterodyne frequency. The Stokes parameter ratio q = Q/I is obtained from measurements acquired from each pixel during a single frame, providing insensitivity to pixel responsivity drift and minimizing polarization artifacts that conventionally arise when this quantity is derived from differences in the signals from separate detectors. Similarly, u = U/I is obtained from a different pixel; q and u are then combined to form the DOLP. A detailed accuracy and tolerance analysis for this polarimeter is presented.