The Effect of Y Content on Structural and Sorption Properties of A2B7-Type Phase in the La-Y-Ni-Al-Mn System.

Metal hydrides are an interesting group of chemical compounds, able to store hydrogen in a reversible, compact and safe manner. Among them, A2B7-type intermetallic alloys based on La-Mg-Ni have attracted particular attention due to their high electrochemical hydrogen storage capacity (∼400 mAh/g) and extended cycle life. However, the presence of Mg makes their synthesis via conventional metallurgical routes challenging. Replacing Mg with Y is a viable approach. Herein, we present a systematic study for a series of compounds with a nominal composition of La2-xYxNi6.50Mn0.33Al0.17, x = 0.33, 0.67, 1.00, 1.33, 1.67, focusing on the relationship between the material structural properties and hydrogen sorption performances. The results show that while the hydrogen-induced phase amorphization occurs in the Y-poor samples (x < 1.00) already during the first hydrogen absorption, a higher Y content helps to maintain the material crystallinity during the hydrogenation cycles and increases its H-storage capacity (1.37 wt.% for x = 1.00 vs. 1.60 wt.% for x = 1.67 at 50 °C). Thermal conductivity experiments on the studied compositions indicate the importance of thermal transfer between powder individual particles and/or a measuring instrument.

Structural properties of mixed conductor Ba1-xGd1-yLax+yCo2O6-δ.

Ba1-xGd1-yLax+yCo2O6-δ (BGLC) compositions with large compositional ranges of Ba, Gd, and La have been characterised with respect to phase compositions, structure, and thermal and chemical expansion. The results show a system with large compositional flexibility, enabling tuning of functional properties and thermal and chemical expansion. We show anisotropic chemical expansion and detailed refinements of emerging phases as La is substituted for Ba and Gd. The dominating phase is the double perovskite structure Pmmm, which is A-site ordered along the c-axes and with O vacancy ordering along the b-axis in the Ln-layer. Phases emerging when substituting La for Ba are orthorhombic Ba-deficient Pbnm and cubic LaCoO3-based R3̄c. When La is almost completely substituted for Gd, the material can be stabilised in Pmmm, or cubic Pm3̄m, depending on thermal and atmospheric history. We list thermal expansion coefficients for x = 0-0.3, y = 0.2.

Double Perovskite Cobaltites Integrated in a Monolithic and Noble Metal-Free Photoelectrochemical Device for Efficient Water Splitting.

Water photoelectrolysis has the potential to produce renewable hydrogen fuel, therefore addressing the intermittent nature of sunlight. Herein, a monolithic, photovoltaic (PV)-assisted water electrolysis device of minimal engineering and of low (in the µg range) noble-metal-free catalysts loading is presented for unassisted water splitting in alkaline media. An efficient double perovskite cobaltite catalyst, originally developed for high-temperature proton-conducting ceramic electrolyzers, possesses high activity for the oxygen evolution reaction in alkaline media at room temperatures too. Ba1-xGd1-yLax+yCo2O6-δ (BGLC) is combined with a NiMo cathode, and a solar-to-hydrogen efficiency of 6.6% in 1.0 M NaOH, under 1 sun simulated illumination for 71 h, is demonstrated. This work highlights how readily available earth-abundant materials and established PV methods can achieve high performance and stable and monolithic photoelectrolysis devices with potential for full-scale applications.

The role of grain boundary scattering in reducing the thermal conductivity of polycrystalline XNiSn (X = Hf, Zr, Ti) half-Heusler alloys.

Thermoelectric application of half-Heusler compounds suffers from their fairly high thermal conductivities. Insight into how effective various scattering mechanisms are in reducing the thermal conductivity of fabricated XNiSn compounds (X = Hf, Zr, Ti, and mixtures thereof) is therefore crucial. Here, we show that such insight can be obtained through a concerted theory-experiment comparison of how the lattice thermal conductivity κ Lat(T) depends on temperature and crystallite size. Comparing theory and experiment for a range of Hf0.5Zr0.5NiSn and ZrNiSn samples reported in the literature and in the present paper revealed that grain boundary scattering plays the most important role in bringing down κ Lat, in particular so for unmixed compounds. Our concerted analysis approach was corroborated by a good qualitative agreement between the measured and calculated κ Lat of polycrystalline samples, where the experimental average crystallite size was used as an input parameter for the calculations. The calculations were based on the Boltzmann transport equation and ab initio density functional theory. Our analysis explains the significant variation of reported κ Lat of nominally identical XNiSn samples, and is expected to provide valuable insights into the dominant scattering mechanisms even for other materials.

Destabilization effect of transition metal fluorides on sodium borohydride.

The effect of transition metal fluorides on the decomposition of NaBH4 has been investigated for NaBH4 ball milled with TiF3, MnF3 or FeF3. The compounds were examined by thermal programmed desorption with residual gas analysis, thermo gravimetric analysis and volumetric measurements using a Sieverts-type apparatus. The phase formation process during thermal decomposition was studied by in situ synchrotron radiation powder X-ray diffraction on the as-milled powders. NaBF4 was among the products in all mechano-chemical reactions. (11)B-NMR spectra analysis gave NaBF4 : NaBH4 ratios of 1 : 150 for Na-Ti, 1 : 40 for Na-Mn, and 1 : 10 for Na-Fe. Pure NaBH4 possessed a hydrogen release onset temperature of 430 °C. The hydrogen release in the NaBH4-MnF3 system began as low as 130 °C. FeF3 decreased the onset temperature to 161 °C and TiF3 to 200 °C. TiF3 reacted completely with NaBH4 below 320 °C. All the examined systems have negligible emissions of diborane species. H-sorption studies performed at selected temperatures above 300 °C exhibited relatively fast desorption kinetics. Partial hydrogen re-absorption was observed for the Na-Mn and Na-Fe samples.