Thermal implant removal in a pig jaw: a proof of concept study.

OBJECTIVES: The aim of this study was to evaluate whether thermal implant removal of osseointegrated implants is possible using a diode laser with an specific temperature-time interval. MATERIALS AND METHODS: First, tooth extraction of the first three premolars was performed in the maxilla and mandible on both sides of 10 pig. After 3 months, implants were inserted into the upper and lower jaws of 10 pigs. After 3 more months, osseointegrated implants were heated with a laser device to a temperature of 50 °C for 1 min. After 14 days, the implant stability quotient (ISQ), torque-out values, and bone-to-implant contact (BIC) ratio were assessed using resonance frequency analysis. RESULTS: ISQ values showed no significant differences within each group or between the control and test groups. Furthermore, torque-out and BIC value measurements presented no significant differences between the groups. CONCLUSIONS: At 50°C, changes in the BIC values were noticeably smaller; however, these differences were not significant. Future studies should evaluate the same procedures at either a higher temperature or longer intervals. CLINICAL RELEVANCE: With only 50 °C for 1 min, a dental implant will not de-integrate predictably.

Optimal untwisting of the orbital bandeau in unicoronal craniosynostosis correction: A finite element analysis.

BACKGROUND: Surgical correction of unicoronal craniosynostosis (UCS) is highly complex due to its asymmetric appearance. Although fronto-orbital advancement (FOA) is a versatile technique for craniosynostosis correction, harmonization of the orbital bandeau in UCS is difficult to predict. This study evaluates the biomechanics of the orbital bandeau using different patterns and varying characteristics of inner cortical bone layer osteotomies in a finite element (FE) analysis. METHOD: An FE model was created using the computed tomography (CT) scan of a 6.5-month-old male infant with a right-sided UCS. The unaffected side of the orbital bandeau was virtually mirrored, and anatomical correction of the orbital bandeau was simulated. Different combinations of osteotomy patterns, numbers, depths, and widths were examined (n = 48) and compared to an uncut model. RESULTS: Reaction forces and maximum stress values differed significantly (p < 0.01) among osteotomy patterns and between each osteotomy characteristic. Regardless of the osteotomy pattern, higher numbers of osteotomies significantly (p < 0.05) correlated with reductions in reaction force and maximum stress. An X-shaped configuration with three osteotomies deep and wide to the bone was biomechanically the most favorable model. CONCLUSION: Inner cortical bone layer osteotomy might be an effective modification to the conventional FOA approach in terms of predictable shaping of the orbital bandeau.

The impact of orbital floor defect ratio on changes in the inferior rectus muscle and prediction of posttraumatic enophthalmos - A cadaver study.

BACKGROUND: Orbital floor fractures result in critical changes in the shape and inferior rectus muscle (IRM) position. Radiological imaging of IRM changes can be used for surgical decision making or prediction of ocular symptoms. Studies with a systematic consideration of the orbital floor defect ratio in this context are missing in the literature. Accordingly, this study on human cadavers aimed to systematically investigate the impact of the orbital floor defect ratio on changes in the IRM and the prediction of posttraumatic enophthalmos. METHODS: Seventy-two orbital floor defects were placed in cadaver specimens using piezosurgical removal. The orbital defect area (ODA), orbital floor area (OFA), position and IRM shape, and enophthalmos were measured using computed tomography (CT) scans. RESULTS: The ODA/OFA ratio correlated significantly (p < 0.001) with the shape (Spearman's rho: 0.558) and position (Spearman's rho: 0.511) of the IRM, and with enophthalmos (Spearman's rho: 0.673). Increases in the ODA/OFA ratio significantly rounded the shape of the IRM (ß: 0.667; p < 0.001) and made a lower position of the IRM more likely (OR: 1.093; p = 0.003). In addition, increases in the ODA/OFA ratio were significantly associated with the development of relevant enophthalmos (OR: 1.159; p = 0.008), adjusted for the defect localization and shape of the IRM. According to receiver operating characteristics analysis (AUC: 0.876; p < 0.001), a threshold of ODA/OFA ratio ≥ 32.691 for prediction of the risk of development of enophthalmos yielded a sensitivity of 0.809 and a specificity of 0.842. CONCLUSION: The ODA/OFA ratio is a relevant parameter in the radiological evaluation of orbital floor fractures, as it increases the risk of relevant enophthalmos, regardless of fracture localization and shape of the IRM. Therefore, changes in the shape and position of the IRM should be considered in surgical treatment planning. A better understanding of the correlates of isolated orbital floor fractures may help to develop diagnostic scores and standardize therapeutic algorithms in the future.

The impact of polydioxanone (PDS) foil thickness on reconstruction of the orbital geometry after isolated orbital floor fractures.

PURPOSE: The orbital floor is frequently involved in head trauma. Current evidence on the use of reconstruction materials for orbital floor repair is inconclusive. Accordingly, this study aimed to compare the impact of polydioxanone (PDS) foil thickness on reconstruction of the orbital geometry after isolated orbital floor fractures. METHODS: Standardized isolated orbital floor fractures were symmetrically created in 11 cadaver heads that provided 22 orbits. PDS foils with thicknesses of 0.25-0.5 mm were inserted. Computed tomography (CT) scans of the native, fractured, and reconstructed orbits were obtained, and orbital volume, orbital height, and foil bending were measured. RESULTS: Orbital volume and height significantly (p < 0.01) increased after the creation of isolated orbital floor fractures and significantly (p = 0.001) decreased with overcorrection of the orbital geometry after orbital floor reconstruction with PDS 0.25 mm or PDS 0.5 mm. The orbital geometry reconstruction rate did not differ significantly with respect to foil thickness. However, compared to PDS 0.5 mm, the use of PDS 0.25 mm resulted in quantitatively higher reconstructive accuracy and a restored orbital volume that did not significantly differ from the initial volume. CONCLUSION: Orbital floors subjected to isolated fractures were successfully reconstructed using PDS regardless of foil thickness, with overcorrection of the orbital geometry. Due to its lower flexural stiffness, PDS 0.25 mm appeared to provide more accurate orbital geometry reconstruction than PDS 0.5 mm, although no significant difference in reconstructive accuracy between PDS 0.25 mm and PDS 0.5 mm was observed in this cadaveric study.

Insights into Predicting Tooth Extraction from Panoramic Dental Images: Artificial Intelligence vs. Dentists.

OBJECTIVES: Tooth extraction is one of the most frequently performed medical procedures. The indication is based on the combination of clinical and radiological examination and individual patient parameters and should be made with great care. However, determining whether a tooth should be extracted is not always a straightforward decision. Moreover, visual and cognitive pitfalls in the analysis of radiographs may lead to incorrect decisions. Artificial intelligence (AI) could be used as a decision support tool to provide a score of tooth extractability. MATERIAL AND METHODS: Using 26,956 single teeth images from 1,184 panoramic radiographs (PANs), we trained a ResNet50 network to classify teeth as either extraction-worthy or preservable. For this purpose, teeth were cropped with different margins from PANs and annotated. The usefulness of the AI-based classification as well that of dentists was evaluated on a test dataset. In addition, the explainability of the best AI model was visualized via a class activation mapping using CAMERAS. RESULTS: The ROC-AUC for the best AI model to discriminate teeth worthy of preservation was 0.901 with 2% margin on dental images. In contrast, the average ROC-AUC for dentists was only 0.797. With a 19.1% tooth extractions prevalence, the AI model's PR-AUC was 0.749, while the dentist evaluation only reached 0.589. CONCLUSION: AI models outperform dentists/specialists in predicting tooth extraction based solely on X-ray images, while the AI performance improves with increasing contextual information. CLINICAL RELEVANCE: AI could help monitor at-risk teeth and reduce errors in indications for extractions.

Maxillary and mandibular overdentures retained by two unsplinted narrow-diameter titanium-zirconium implants - A clinical pilot study.

OBJECTIVES: To evaluate the survival rates and marginal bone loss of narrow-diameter titanium-zirconium implants supporting complete maxillary and mandibular overdentures up to 3 years after loading. MATERIALS AND METHODS: Ten completely edentulous patients who were dissatisfied with their complete dentures were enrolled. Two narrow-diameter implants were placed in the canine region of the maxilla and mandible. After second-stage surgery, implant-supported overdentures (palatal-free) attached by parallel alignable stud-attachments were placed. Patients were followed periodically for up to 36 months. Standardized radiographs were taken at baseline, 12 and 36 months to analyze mean marginal bone level changes around the implants. RESULTS: The Kaplan-Meier survival rates were 100% for mandibular and 68.0% (SE ± 10.9%) for maxillary implants at 36 months (p = .008). Six maxillary implants failed after loading; no mandibular implants were lost. Five implants failed due to loss of osseointegration. One implant fractured. The mean marginal bone level changes around the analyzed implants (n = 28, 9 patients) were -0.71 ± 0.82 mm in the mandible and -2.08 ± 1.52 mm in the maxilla at the 36-month follow-up. The difference in marginal bone level changes between the maxilla and mandible was significant (p = .019) at the 12- and 36-month follow-ups. CONCLUSION: Two narrow-diameter titanium-zirconium implants with stud-attachments showed a highly satisfactory outcome in the mandible. The maxillary implants showed a high failure rate and significantly more bone loss over time than the mandibular implants. The minimal concept of two implants and an overdenture should be limited to the edentulous mandible.

Dental Implant Placement in the Maxilla Following Ridge Augmentation with Free Iliac Bone Graft and Oral Rehabilitation with Fixed Prosthesis: a Three-Year Follow-Up Study.

Objectives: This prospective follow-up study aimed to evaluate the stability values of tapered titanium implants inserted into maxilla following ridge augmentation with free iliac bone graft and crestal bone changes up to three years of follow-up. Material and Methods: A total of seven patients with 34 tapered titanium implants in the maxilla with fixed protheses were enrolled in this prospective follow-up study. Patients with previously augmented maxillae using free iliac bone grafts were included. Implant stability was measured (Osstell™) for up to three months of healing. Peri-implant bone resorption was measured using radiographic images taken immediately after implant surgery and after three years. Using a clinical and radiological examination survival and success rates were evaluated. Results: After implant insertion, the stability was 60.93, whereas the stability increased significantly (P = 0.0192) to 64.97 at implant exposure (after 3 months). The mean bone loss around the implants was 1.13 mm after three years. Clinical parameters revealed a mean sulcus depth of 2.76 (1.18) mm and a bleeding on probing score of 0.29 (0.58). The survival rate was 100%, and the success rate was 67.65% at the end of the study. Conclusions: Tapered implants can be used in free iliac bone grafts for fixed dentures. Implant stability values were high after insertion. In terms of a success rate of 67.65%, the patient's jaw reconstruction indicated a reduced implant success when comparing the data with healthy patients without any augmentation procedures.

Does the Anastomosis Recipient Vessel Have an Influence on Free Flap Perfusion in Microvascular Head and Neck Reconstruction-A Retrospective Analysis of 338 Cases with Comparison of Flap Perfusion between Different Arterial and Venous Recipient Vessels in Radial Free Forearm Flaps, Anterolateral Thigh Flaps, and Fibula Free Flaps.

Background: Flap perfusion is a prerequisite for microvascular free flap survival and a parameter routinely used for flap monitoring. The aim of this study was to investigate the influence of the anastomosis recipient vessel on flap perfusion. Methods: Flap perfusion was retrospectively analyzed in 338 patients who underwent head and neck reconstruction with microvascular free flaps between 2011 and 2020. The Oxygen-to-see tissue oxygen analysis system measurements for intraoperative and postoperative flap blood flow, hemoglobin concentration, and hemoglobin oxygen saturation at 8 and 2 mm tissue depths were compared between arterial anastomosis recipient vessels (external carotid artery [ECA], facial artery [FAA], lingual artery [LIA], and superior thyroid artery [STA]) and venous anastomosis recipient vessels (internal jugular vein [IJV], combination of IJV and IJV branches, IJV branches, and external jugular vein). Results: The postoperative hemoglobin concentration at 2 mm tissue depth differed significantly between arterial anastomosis recipient vessels (ECA, 41.0 arbitrary units [AU]; FAA, 59.0 AU; LIA, 51.5 AU; STA, 59.0 AU; p = 0.029). This difference did not persist in the multivariable testing (p = 0.342). No other differences in flap blood flow, hemoglobin concentration, or hemoglobin oxygen saturation were observed between the arterial and venous anastomosis recipient vessels (p > 0.05 for all). Conclusions: The arterial and venous recipient vessels used for anastomosis did not influence microvascular free flap perfusion. This underlines the capability of the studied recipient vessels to adequately perfuse free flaps, may explain the observed indifferent flap survival rates between commonly used anastomosis recipient vessels, and implies that the recipient vessel is not a confounding variable for flap monitoring with the Oxygen-to-see tissue oxygen analysis system. Further prospective studies are needed to confirm the findings.

HER3 (ERBB3) amplification in liposarcoma - a putative new therapeutic target?

BACKGROUND: Liposarcomas are among the most common mesenchymal malignancies. However, the therapeutic options are still very limited and so far, targeted therapies had not yet been established. Immunotherapy, which has been a breakthrough in other oncological entities, seems to have no efficacy in liposarcoma. Complicating matters further, classification remains difficult due to the diversity of morphologies and nonspecific or absent markers in immunohistochemistry, leaving molecular pathology using FISH or sequencing as best options. Many liposarcomas harbor MDM2 gene amplifications. In close relation to the gene locus of MDM2, HER3 (ERBB3) gene is present and co-amplification could occur. Since the group of HER/EGFR receptor tyrosine kinases and its inhibitors/antibodies play a role in a broad spectrum of oncological diseases and treatments, and some HER3 inhibitors/antibodies are already under clinical investigation, we hypothesized that in case of HER3 co-amplifications a tumor might bear a further potential therapeutic target. METHODS: We performed FISH analysis (MDM2, DDIT3, HER3) in 56 archived cases and subsequently performed reclassification to confirm the diagnosis of liposarcoma. RESULTS: Next to 16 out of 56 cases needed to be re-classified, in 20 out of 54 cases, a cluster-amplification of HER3 could be detected, significantly correlating with MDM2 amplification. Our study shows that the entity of liposarcomas show specific molecular characteristics leading to reclassify archived cases by modern, established methodologies. Additionally, in 57.1% of these cases, HER3 was cluster-amplified profusely, presenting a putative therapeutic target for targeted therapy. CONCLUSION: Our study serves as the initial basis for further investigation of the HER3 gene as a putative therapeutic target in liposarcoma.

Cyto R-CNN and CytoNuke Dataset: Towards reliable whole-cell segmentation in bright-field histological images.

BACKGROUND AND OBJECTIVE: Cell segmentation in bright-field histological slides is a crucial topic in medical image analysis. Having access to accurate segmentation allows researchers to examine the relationship between cellular morphology and clinical observations. Unfortunately, most segmentation methods known today are limited to nuclei and cannot segment the cytoplasm. METHODS: We present a new network architecture Cyto R-CNN that is able to accurately segment whole cells (with both the nucleus and the cytoplasm) in bright-field images. We also present a new dataset CytoNuke, consisting of multiple thousand manual annotations of head and neck squamous cell carcinoma cells. Utilizing this dataset, we compared the performance of Cyto R-CNN to other popular cell segmentation algorithms, including QuPath's built-in algorithm, StarDist, Cellpose and a multi-scale Attention Deeplabv3+. To evaluate segmentation performance, we calculated AP50, AP75 and measured 17 morphological and staining-related features for all detected cells. We compared these measurements to the gold standard of manual segmentation using the Kolmogorov-Smirnov test. RESULTS: Cyto R-CNN achieved an AP50 of 58.65% and an AP75 of 11.56% in whole-cell segmentation, outperforming all other methods (QuPath 19.46/0.91%; StarDist 45.33/2.32%; Cellpose 31.85/5.61%, Deeplabv3+ 3.97/1.01%). Cell features derived from Cyto R-CNN showed the best agreement to the gold standard (D¯=0.15) outperforming QuPath (D¯=0.22), StarDist (D¯=0.25), Cellpose (D¯=0.23) and Deeplabv3+ (D¯=0.33). CONCLUSION: Our newly proposed Cyto R-CNN architecture outperforms current algorithms in whole-cell segmentation while providing more reliable cell measurements than any other model. This could improve digital pathology workflows, potentially leading to improved diagnosis. Moreover, our published dataset can be used to develop further models in the future.

Tensile strength of adhesives in peripheral nerve anastomoses: an in vitro biomechanical evaluation of four different neurorrhaphies.

BACKGROUND: The fundamental prerequisite for prognostically favorable postoperative results of peripheral nerve repair is stable neurorrhaphy without interruption and gap formation. METHODS: This study evaluates 60 neurorrhaphies on femoral chicken nerves in terms of the procedure and the biomechanical properties. Sutured neurorrhaphies (n = 15) served as control and three sutureless adhesive-based nerve repair techniques: Fibrin glue (n = 15), Histoacryl glue (n = 15), and the novel polyurethane adhesive VIVO (n = 15). Tensile and elongation tests of neurorrhaphies were performed on a tensile testing machine at a displacement rate of 20 mm/min until failure. The maximum tensile force and elongation were recorded. RESULTS: All adhesive-based neurorrhaphies were significant faster in preparation compared to sutured anastomoses (p < 0.001). Neurorrhaphies by sutured (102.8 [cN]; p < 0.001), Histoacryl (91.5 [cN]; p < 0.001) and VIVO (45.47 [cN]; p < 0.05) withstood significant higher longitudinal tensile forces compared to fibrin glue (10.55 [cN]). VIVO, with △L/L0 of 6.96 [%], showed significantly higher elongation (p < 0.001) compared to neurorrhaphy using fibrin glue. CONCLUSION: Within the limitations of an in vitro study the adhesive-based neurorrhaphy technique with VIVO and Histoacryl have the biomechanical potential to offer alternatives to sutured neuroanastomosis because of their stability, and faster handling. Further in vivo studies are required to evaluate functional outcomes and confirm safety.

Development of a universal cutting guide for raising deep circumflex iliac artery flaps.

PURPOSE: The deep circumflex iliac crest flap (DCIA) is used for the reconstruction of the jaw. For fitting of the transplant by computer-aided planning (CAD), a computerized tomography (CT) of the jaw and the pelvis is necessary. Ready-made cutting guides save a pelvic CT and healthcare resources while maintaining the advantages of the CAD planning. METHODS: A total of 2000 CTs of the pelvis were divided into groups of 500 by sex and age (≤ 45 and > 45 years). Three-dimensional (3D) pelvis models were aligned and averaged. Cutting guides were designed on the averaged pelvis for each group and an overall averaged pelvis. The cutting guides and 50 randomly selected iliac crests (10 from each group and 10 from the whole collective) were 3D printed. The appropriate cutting guide was mounted to the iliac crest and a cone beam CT was performed. The thickness of the space between the iliac crest and the cutting guide was evaluated. RESULTS: Overall the mean thickness of the space was 2.137 mm and the mean volume of the space was 4513 mm3. The measured values were significantly different between the different groups. The overall averaged group had not the greatest volume, maximum thickness and mean thickness of the space. CONCLUSION: Ready-made cutting guides for the DCIA flap fit to the iliac crest and make quick and accurate flap raising possible while radiation dose and resources can be saved. The cutting guides fit sufficient to the iliac crest and should keep the advantages of a standard CAD planning.

A Biodegradable Tissue Adhesive for Post-Extraction Alveolar Bone Regeneration under Ongoing Anticoagulation-A Microstructural Volumetric Analysis in a Rodent Model.

In addition to post-extraction bleeding, pronounced alveolar bone resorption is a very common complication after tooth extraction in patients undergoing anticoagulation therapy. The novel, biodegenerative, polyurethane adhesive VIVO has shown a positive effect on soft tissue regeneration and hemostasis. However, the regenerative potential of VIVO in terms of bone regeneration has not yet been explored. The present rodent study compared the post-extraction bone healing of a collagen sponge (COSP) and VIVO in the context of ongoing anticoagulation therapy. According to a split-mouth design, a total of 178 extraction sockets were generated under rivaroxaban treatment, of which 89 extraction sockets were treated with VIVO and 89 with COSP. Post-extraction bone analysis was conducted via in vivo micro-computed tomography (µCT), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX) after 5, 10, and 90 days. During the observation time of 90 days, µCT analysis revealed that VIVO and COSP led to significant increases in both bone volume and bone density (p ≤ 0.001). SEM images of the extraction sockets treated with either VIVO or COSP showed bone regeneration in the form of lamellar bone mass. Ratios of Ca/C and Ca/P observed via EDX indicated newly formed bone matrixes in both treatments after 90 days. There were no statistical differences between treatment with VIVO or COSP. The hemostatic agents VIVO and COSP were both able to prevent pronounced bone loss, and both demonstrated a strong positive influence on the bone regeneration of the alveolar ridge post-extraction.

A potential new biomarker in HNSCC: metastasis suppressor protein 1 (MTSS1).

OBJECTIVE: Metastasis suppressor protein 1 (MTSS1) is a prognostic tumour marker in different malignant epithelial tumour entities and previously mainly the MTSS1 expression was analysed. This study evaluated the best analysis method as a prognosis and aggressiveness tumour marker in head and neck squamous cell carcinoma (HNSCC). STUDY DESIGN: MTSS1 expression, MTSS1 intensity, interpretation MTSS1 score and MTSS1 edging score were analysed in formalin-fixed paraffin-embedded tissue slices of 60 patients with proven HNSCC and correlated with clinical and pathological outcome parameters. RESULTS: A lack of MTSS1 expression showed tumour aggressiveness, but surprisingly, mainly MTSS1 intensity was correlated with a worse patient outcome. There was a significant correlation between higher MTSS1 intensity and an increased risk for lymph node metastasis (P = .027) and a significant increased risk for extracapsular growth (P = .016). Furthermore, disease-specific survival was worse in cases with higher MTSS1 intensity (P = .001). CONCLUSION: MTSS1 intensity has a high scientific potential for further studies and could potentially be used as a prognostic marker in diagnostic and therapeutic decision-making.

AIxSuture: vision-based assessment of open suturing skills.

PURPOSE: Efficient and precise surgical skills are essential in ensuring positive patient outcomes. By continuously providing real-time, data driven, and objective evaluation of surgical performance, automated skill assessment has the potential to greatly improve surgical skill training. Whereas machine learning-based surgical skill assessment is gaining traction for minimally invasive techniques, this cannot be said for open surgery skills. Open surgery generally has more degrees of freedom when compared to minimally invasive surgery, making it more difficult to interpret. In this paper, we present novel approaches for skill assessment for open surgery skills. METHODS: We analyzed a novel video dataset for open suturing training. We provide a detailed analysis of the dataset and define evaluation guidelines, using state of the art deep learning models. Furthermore, we present novel benchmarking results for surgical skill assessment in open suturing. The models are trained to classify a video into three skill levels based on the global rating score. To obtain initial results for video-based surgical skill classification, we benchmarked a temporal segment network with both an I3D and a Video Swin backbone on this dataset. RESULTS: The dataset is composed of 314 videos of approximately five minutes each. Model benchmarking results are an accuracy and F1 score of up to 75 and 72%, respectively. This is similar to the performance achieved by the individual raters, regarding inter-rater agreement and rater variability. We present the first end-to-end trained approach for skill assessment for open surgery training. CONCLUSION: We provide a thorough analysis of a new dataset as well as novel benchmarking results for surgical skill assessment. This opens the doors to new advances in skill assessment by enabling video-based skill assessment for classic surgical techniques with the potential to improve the surgical outcome of patients.

Assessment of the Electrolyte Heterogeneity of Tissues in Mandibular Bone-Infiltrating Head and Neck Cancer Using Laser-Induced Breakdown Spectroscopy.

Laser-induced breakdown spectroscopy (LIBS) was recently introduced as a rapid bone analysis technique in bone-infiltrating head and neck cancers. Research efforts on laser surgery systems with controlled tissue feedback are currently limited to animal specimens and the use of nontumorous tissues. Accordingly, this study aimed to characterize the electrolyte composition of tissues in human mandibular bone-infiltrating head and neck cancer. Mandible cross-sections from 12 patients with bone-invasive head and neck cancers were natively investigated with LIBS. Representative LIBS spectra (n = 3049) of the inferior alveolar nerve, fibrosis, tumor stroma, and cell-rich tumor areas were acquired and histologically validated. Tissue-specific differences in the LIBS spectra were determined by receiver operating characteristics analysis and visualized by principal component analysis. The electrolyte emission values of calcium (Ca) and potassium (K) significantly (p < 0.0001) differed in fibrosis, nerve tissue, tumor stroma, and cell-rich tumor areas. Based on the intracellular detection of Ca and K, LIBS ensures the discrimination between the inferior alveolar nerve and cell-rich tumor tissue with a sensitivity of ≥95.2% and a specificity of ≥87.2%. The heterogeneity of electrolyte emission values within tumorous and nontumorous tissue areas enables LIBS-based tissue recognition in mandibular bone-infiltrating head and neck cancer.

Optical Three-Dimensional Imaging for Objective Evaluation of the Donor Site after Anterolateral Thigh Flap Surgery.

Background: The high volume of the fasciomyocutaneous anterolateral thigh flaps (ALT) is suitable for the reconstruction of pronounced soft tissue defects. At the same time, harvesting ALT results in a drastic change in thigh shape. Here, we present an optical three-dimensional imaging method for thigh comparison, which can be an objective and reproducible method for evaluating donor sites after ALT harvesting. Methods: In total, 128 thighs were scanned with an optical three-dimensional scanner, Vectra XT ®. Sixty-eight non-operated right and left thighs were compared and served as a control. Sixty thighs were scanned in the ALT group. The average surface area deviations, thigh volume, thigh circumference, and flap ratio to thigh circumference were calculated. The results were correlated with Δthigh circumference and Δvolume of the unoperated thighs of the control group. Results: No significant difference between the thigh volumes of the right and left thighs was found in the control group. Removal of an ALT flap showed a significant (p < 0.007) volume reduction compared to unoperated thighs (2.7 ± 0.8 L and 3.3 ± 0.9 L, respectively). Flap area correlated strongly with the Δthigh circumference (r = 0.66, p < 0.001) and Δvolume (r = 0.68, p < 0.001). Strong correlations were observed between flap ratio and thigh circumference with Δhigh circumference (r = 0.57, p < 0.001) and Δvolume (r = 0.46, p < 0.05). Conclusions: Optical three-dimensional imaging provides an objective and reproducible tool for detecting changes in thigh morphology volume differences after ALT harvesting.

Identifying Differences in Molecular Characteristics Relevant for Remodeling of Periodontal Ligament Stem Cells from the Upper and Lower Jaw.

Periodontal defects' localization affects wound healing and bone remodeling, with faster healing in the upper jaw compared to the lower jaw. While differences in blood supply, innervation, and odontogenesis contribute, cell-intrinsic variances may exist. Few studies explored cell signaling in periodontal ligament stem cells (PDLSC), overlooking mandible-maxilla disparitiesUsing kinomics technology, we investigated molecular variances in PDLSC. Characterization involved stem cell surface markers, proliferation, and differentiation capacities. Kinase activity was analyzed via multiplex kinase profiling, mapping differential activity in known gene regulatory networks. Upstream kinase analysis identified stronger EphA receptor expression in the mandible, potentially inhibiting osteogenic differentiation. The PI3K-Akt pathway showed higher activity in lower-jaw PDLSC. PDLSC from the upper jaw exhibit superior proliferation and differentiation capabilities. Differential activation of gene regulatory pathways in upper vs. lower-jaw PDLSC suggests implications for regenerative therapies.

Improving detection of oral lesions: Eye tracking insights from a randomized controlled trial comparing standardized to conventional approach.

BACKGROUND: Early detection of oral cancer (OC) or its precursors is the most effective measure to improve outcome. The reasons for missing them on conventional oral examination (COE) or possible countermeasures are still unclear. METHODS: In this randomized controlled trial, we investigated the effects of standardized oral examination (SOE) compared to COE. 49 dentists, specialists, and dental students wearing an eye tracker had to detect 10 simulated oral lesions drawn into a volunteer's oral cavity. RESULTS: SOE had a higher detection rate at 85.4% sensitivity compared to 78.8% in the control (p = 0.017) due to higher completeness (p < 0.001). Detection rate correlated with examination duration (p = 0.002). CONCLUSIONS: A standardized approach can improve systematics and thereby detection rates in oral examinations. It should take at least 5 min. Perceptual and cognitive errors and improper technique cause oral lesions to be missed. Its wide implementation could be an additional strategy to enhance early detection of OC.

Development and validation of a cadaveric porcine Pseudotumor model for Oral Cancer biopsy and resection training.

OBJECTIVE: The gold standard of oral cancer (OC) treatment is diagnostic confirmation by biopsy followed by surgical treatment. However, studies have shown that dentists have difficulty performing biopsies, dental students lack knowledge about OC, and surgeons do not always maintain a safe margin during tumor resection. To address this, biopsies and resections could be trained under realistic conditions outside the patient. The aim of this study was to develop and to validate a porcine pseudotumor model of the tongue. METHODS: An interdisciplinary team reflecting various specialties involved in the oncological treatment of head and neck oncology developed a porcine pseudotumor model of the tongue in which biopsies and resections can be practiced. The refined model was validated in a final trial of 10 participants who each resected four pseudotumors on a tongue, resulting in a total of 40 resected pseudotumors. The participants (7 residents and 3 specialists) had an experience in OC treatment ranging from 0.5 to 27 years. Resection margins (minimum and maximum) were assessed macroscopically and compared beside self-assessed margins and resection time between residents and specialists. Furthermore, the model was evaluated using Likert-type questions on haptic and radiological fidelity, its usefulness as a training model, as well as its imageability using CT and ultrasound. RESULTS: The model haptically resembles OC (3.0 ± 0.5; 4-point Likert scale), can be visualized with medical imaging and macroscopically evaluated immediately after resection providing feedback. Although, participants (3.2 ± 0.4) tended to agree that they had resected the pseudotumor with an ideal safety margin (10 mm), the mean minimum resection margin was insufficient at 4.2 ± 1.2 mm (mean ± SD), comparable to reported margins in literature. Simultaneously, a maximum resection margin of 18.4 ± 6.1 mm was measured, indicating partial over-resection. Although specialists were faster at resection (p < 0.001), this had no effect on margins (p = 0.114). Overall, the model was well received by the participants, and they could see it being implemented in training (3.7 ± 0.5). CONCLUSION: The model, which is cost-effective, cryopreservable, and provides a risk-free training environment, is ideal for training in OC biopsy and resection and could be incorporated into dental, medical, or oncologic surgery curricula. Future studies should evaluate the long-term training effects using this model and its potential impact on improving patient outcomes.