RESUMO
In this work, we report an n-type metal-oxide-semiconductor (nMOS) inverter using chemical vapor deposition (CVD)-grown monolayer WS2 field-effect transistors (FETs). Our large-area CVD-grown monolayer WS2 FETs exhibit outstanding electrical properties including a high on/off ratio, small subthreshold swing, and excellent drain-induced barrier lowering. These are achieved by n-type doping using AlOx/Al2O3 and a double-gate structure employing high-k dielectric HfO2. Due to the superior subthreshold characteristics, monolayer WS2 FETs show high transconductance and high output resistance in the subthreshold regime, resulting in significantly higher intrinsic gain compared to conventional Si MOSFETs. Therefore, we successfully realize subthreshold operating monolayer WS2 nMOS inverters with extremely high gains of 564 and 2056 at supply voltage (VDD) of 1 and 2 V, respectively, and low power consumption of â¼2.3 pW·µm-1 at VDD = 1 V. In addition, the monolayer WS2 nMOS inverter is further expanded to the demonstration of logic circuits such as AND, OR, NAND, NOR logic gates, and SRAM. These findings suggest the potential of monolayer WS2 for high-gain and low-power logic circuits and validate the practical application in large areas.
RESUMO
Metal-oxide semiconductors (MOSs) have emerged as pivotal components in technology related to biosensors and bioelectronics. Detecting biomarkers in sweat provides a glimpse into an individual's metabolism without the need for sample preparation or collection steps. The distinctive attributes of this biosensing technology position it as an appealing option for biomedical applications beyond the scope of diagnosis and healthcare monitoring. This review encapsulates ongoing developments of cutting-edge biosensors based on MOSs. Recent advances in MOS-based biosensors for human sweat analyses are reviewed. Also discussed is the progress in sweat-based biosensing technologies to detect and monitor diseases. Next, system integration of biosensors is demonstrated ultimately to ensure the accurate and reliable detection and analysis of target biomarkers beyond individual devices. Finally, the challenges and opportunities related to advanced biosensors and bioelectronics for biomedical applications are discussed.
Assuntos
Técnicas Biossensoriais , Metais , Óxidos , Semicondutores , Suor , Técnicas Biossensoriais/instrumentação , Técnicas Biossensoriais/métodos , Humanos , Suor/química , Metais/química , Óxidos/química , Desenho de Equipamento , Biomarcadores/análiseRESUMO
The panoramic characteristics of human-machine interfaces (HMIs) have prompted the needs to update the biotechnology community with the recent trends, developments, and future research direction toward next-generation bioelectronics. Bioinspired materials are promising for integrating various bioelectronic devices to realize HMIs. With the advancement of scientific biotechnology, state-of-the-art bioelectronic applications have been extensively investigated to improve the quality of life by developing and integrating bioinspired nanoplatforms in HMIs. This review highlights recent trends and developments in the field of biotechnology based on bioinspired nanoplatforms by demonstrating recently explored materials and cutting-edge device applications. Section 1 introduces the recent trends and developments of bioinspired nanomaterials for HMIs. Section 2 reviews various flexible, wearable, biocompatible, and biodegradable nanoplatforms for bioinspired applications. Section 3 furnishes recently explored substrates as carriers for advanced nanomaterials in developing HMIs. Section 4 addresses recently invented biomimetic neuroelectronic, nanointerfaces, biointerfaces, and nano/microfluidic wearable bioelectronic devices for various HMI applications, such as healthcare, biopotential monitoring, and body fluid monitoring. Section 5 outlines designing and engineering of bioinspired sensors for HMIs. Finally, the challenges and opportunities for next-generation bioinspired nanoplatforms in extending the potential on HMIs are discussed for a near-future scenario. We believe this review can stimulate the integration of bioinspired nanoplatforms into the HMIs in addition to wearable electronic skin and health-monitoring devices while addressing prevailing and future healthcare and material-related problems in biotechnologies.
Assuntos
Materiais Biomiméticos , Nanoestruturas , Dispositivos Eletrônicos Vestíveis , Humanos , Qualidade de Vida , BiotecnologiaRESUMO
Wearable exoskeleton robots have become a promising technology for supporting human motions in multiple tasks. Activity recognition in real-time provides useful information to enhance the robot's control assistance for daily tasks. This work implements a real-time activity recognition system based on the activity signals of an inertial measurement unit (IMU) and a pair of rotary encoders integrated into the exoskeleton robot. Five deep learning models have been trained and evaluated for activity recognition. As a result, a subset of optimized deep learning models was transferred to an edge device for real-time evaluation in a continuous action environment using eight common human tasks: stand, bend, crouch, walk, sit-down, sit-up, and ascend and descend stairs. These eight robot wearer's activities are recognized with an average accuracy of 97.35% in real-time tests, with an inference time under 10 ms and an overall latency of 0.506 s per recognition using the selected edge device.
Assuntos
Aprendizado Profundo , Exoesqueleto Energizado , Robótica , Dispositivos Eletrônicos Vestíveis , Humanos , Atividades HumanasRESUMO
Self-poled molybdenum disulfide embedded polyvinylidene fluoride (MoS2@PVDF) hybrid nanocomposite films fabricated by a bar-printing process are demonstrated to improve the output performances of triboelectric nanogenerators (TENGs). Comparative analyses of MoS2@PVDF films with different MoS2 concentrations and the synergic effect based on postannealing at different temperatures were examined to increase the triboelectric open-circuit voltage and the short-circuit current (â¼200 V and â¼11.8 µA, respectively). A further comprehensive study of the structural and electrical changes that occur on the surfaces of the proposed hybrid nanocomposite films revealed that both MoS2 incorporation into PVDF and postannealing can individually promote the formation of the ß-crystal phase and generate polarity in the PVDF. In addition, MoS2, which provides triboelectric trap states, was found to play a significant role in improving the charge capture capacity of the nanocomposite film and increasing the potential difference between two electrodes of TENGs. The produced electrical energy of the developed wearable TENGs with excellent operational stability for a long duration was utilized to power a variety of mobile smart gadgets in addition to low-power electronic devices. We believe that this study can provide a simple and effective approach to improving the energy-harvesting capabilities of wearable TENGs based on hybrid nanocomposite films.
RESUMO
Capacitive-type physical sensors based on hybrid dielectric composites of zinc oxide nanowires/poly(dimethylsiloxane) (ZnO NWs@PDMS) and flexible electrodes of immobilized carbon nanotube (CNT) random networks, which are highly sensitive to pressure and touch stimuli, are demonstrated. Immobilized CNT random networks densely entangled in a Nafion matrix improve the electrical stability of wearable pressure sensors against mechanical stress with a bending radius of 5 mm. The effect of ZnO NW incorporation into PDMS on the sensing performance of pressure sensors is investigated, which results in a significantly enhanced sensitivity of 8.77 × 10-4 Pa-1 in low-pressure regions, compared to pristine PDMS (1.32 × 10-4 Pa-1). This improvement is attributed to the increase in the effective dielectric constant (εr) of the hybrid dielectric composites with their piezoelectric properties. In addition, wearable pressure/touch sensor arrays capable of detecting ultralow pressures (down to 20 Pa) and the real-time identification of touch and pressure stimuli via different sensing mechanisms are demonstrated. We believe that the multifunctionality introduced by the proposed sensors can extend the potential of physical sensor applications, while they are suitable for integration with wearable electronics based on hybrid nanocomposites and interfaces.
RESUMO
Microwave-assisted functionalization of zinc oxide nanoflowers (ZnO NFs) with palladium nanoparticles (Pd NPs) is demonstrated to realize high-performance chemiresistive-type hydrogen (H2) gas sensors operating at room temperature (RT). The developed gas sensors exhibit a high response of up to 70% at 50 ppm and a theoretical detection limit of 10 ppb. The formation of ZnO NFs with an enhanced specific surface area and their functionalization with Pd NPs are investigated through various characterizations. Furthermore, the optimization of microwave absorption upon the structural incorporations between nanostructures (NF-NPs) is investigated for solution-based functionalization at low temperatures (below 120 °C) for short process times (within 1 min), compared to the conventional thermal annealing at 250 °C for 1 h. Highly sensitive and selective ZnO-based gas sensors enabling the detection of H2 gas molecules at 300 ppb concentration at RT exhibit a short response/recovery time of below 3 min and a good selectivity toward different gases including nitric oxide, carbon monoxide, and oxygen. The successful functionalization of nanostructured metal oxide semiconductors (MOSs) with metal NPs via effective and practical microwave absorption enhances the potential on highly sensitive and selective chemiresistive-type MOS-based gas sensors operating at RT without additional heaters or photogenerators.
RESUMO
Although conventional skin-attachable electronics exhibit good functionalities, their direct attachment (without any adhesive) to human skin with sufficient conformal contact is challenging. Herein, all-solution-processed on-skin electronics based on self-reconfigurable high-weight-per- volume-gelatin (HWVG) film constructed using an effective, biocompatible water absorption-evaporation technique are demonstrated. Completely conformal contact of self-reconfigurable HWVG films is realized by rapidly inducing anisotropic swelling in the perpendicular direction and covering any curvature on the skin without spatial gap or void after shrinking. A sufficiently thin HWVG film (~2 um) exhibited higher adhesion owing to van der Waals force and the carboxylic acid and amine groups in HWVG film form cross-linkages through intermolecular bonds with human skin. Self-reconfigurable HWVG films with high biocompatibility are optimized to afford a superior efficiency of 87.83 % at a concentration of 20 % (w/v) and a storage modulus of 1822 MPa at 36.5 °C. Furthermore, functional nanoelectrodes consisting of self-reconfigurable silver nanowires/HWVG films for high-performance on-skin sensors allowing the detection of sensitive motion and electrophysiological signals, as well as an armband-type sensor system incorporated with a smartphone for health-care monitoring are demonstrated. Outstanding performances, including stability, reliability, flexibility, re-usability, biocompatibility, and permeability of on-skin electronics based on HWVG films can open-up a prospective route to realizing breathable human-machine interfaces based on biocompatible materials and processes.
Assuntos
Técnicas Biossensoriais , Dispositivos Eletrônicos Vestíveis , Eletrônica , Gelatina , Humanos , Estudos Prospectivos , Reprodutibilidade dos TestesRESUMO
PURPOSE: Knowledge of the distribution of intramuscular nerves of the extraocular muscles is crucial for understanding their function. The purpose of this study was to elucidate the intramuscular distribution of the oculomotor nerve within the inferior rectus muscle (IRM) using Sihler's staining. METHOD: Ninety-three IRM from 50 formalin-embalmed cadavers were investigated. The IRM including its branches of the oculomotor nerve was finely dissected from its origin to the point where it inserted into the sclera. The intramuscular nerve course was investigated after performing Sihler's whole-mount nerve staining technique that stains the nerves while rendering other soft tissues either translucent or transparent. RESULTS: The oculomotor nerve enters the IRM around the distal one-fourth of the muscle and then divides into multiple smaller branches. The intramuscular nerve course finishes around the distal three-fifth of the IRM in gross observations. The types of branching patterns of the IRM could be divided into two subcategories based on whether or not topographic segregation was present: (1) no significant compartmental segregation (55.9% of cases) and (2) a several-zone pattern with possible segregation (44.1% of cases). Possible compartmentalization was less clear for the IRM, which contained overlapping mixed branches between different trunks. CONCLUSION: Sihler's staining is a useful technique for visualizing the gross nerve distribution of the IRM. The new information about the nerve distribution and morphological features provided by this study will improve the understanding of the biomechanics of the IRM, and could be useful for strabismus surgery.
Assuntos
Músculos Oculomotores/inervação , Nervo Oculomotor/anatomia & histologia , Idoso , Idoso de 80 Anos ou mais , Cadáver , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Coloração e Rotulagem/métodosRESUMO
Frankfort horizontal line, the line passing through the orbitale and porion, is one of the most widely used intracranial landmarks in cephalometric analysis. This study investigated the use of the orbito-occipital line extending from the orbitale to the external occipital protuberance as a novel horizontal line of the skull for substituting the Frankfort horizontal line. We evaluated the reproducibility of the new landmark and measured the angle between the orbito-occipital line and the Frankfort line. This study was conducted on 170 facial computed tomography (CT) scans of living adults from the Department of Plastic Surgery. After three-dimensionally reconstructed images were obtained from facial CT, the porion, orbitale, and external occipital protuberance were indicated by two observers twice. The angles between the orbito-meatal line (inferior orbital rim to porion; the Frankfort line) and the orbito-occipital line (inferior orbital rim to external occipital protuberance) were measured. There was no significant intraobserver or interobserver bias. The overall angle between the Frankfort line and orbito-occipital line was -0.5°±2.2° (mean±standard deviation). There was no statistically significant difference among side and sex. This study demonstrated good reproducibility of a new landmark-the external occipital protuberance-tested to replace the porion. The orbito-occipital line is a reliable, reproducible, and easily identifiable line, and has potential as a novel standard horizontal line to replace or at least supplement the Frankfort line in anthropological studies and certain clinical applications.
RESUMO
BACKGROUND: The deep temporal fascia (DTF) is known to separate into two layers that descend to attach to the zygomatic arch. When surgeons reduce an isolated fracture of the zygomatic arch through a temporal approach, the temporal incision site needs to be superior to the split line of the DTF. MATERIALS AND METHODS: Sixty-seven hemifacial cadavers were investigated after removing the skin, subcutaneous tissue, and superficial temporal fascia. The superficial layer of the DTF was exposed. We cut the superficial layer along the line along, which it adhered to the deep layer inseparably. The heights of the split line of the DTF from the superior border of the zygomatic arch and from the top of the helix were measured at three points: at the jugale, zygion, and 3â¯cm from the tragus. RESULTS: In all cases there were thick identifiable deep layers of the DTF. The mean heights of the split line of the DTF from the superior border of the zygomatic arch were 49.8, 46.7, and 42.6â¯mm at the jugale, zygion, and 3â¯cm from the tragus, respectively; the corresponding mean heights of the split line from the top of the helix were 19.1, 15.6, and 11.4â¯mm. CONCLUSIONS: Knowledge of the mean height of the split line of the DTF will be helpful for surgeons to determine the temporal incision site for ensuring the safe reduction of a zygomatic arch fracture.
Assuntos
Músculo Temporal/cirurgia , Zigoma/lesões , Fraturas Zigomáticas/cirurgia , Idoso , Idoso de 80 Anos ou mais , Cadáver , Redução Fechada/métodos , Fáscia/anatomia & histologia , Fasciotomia/métodos , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Músculo Temporal/anatomia & histologia , Zigoma/cirurgiaRESUMO
Cylindrical fullerenes (or carbon nanotubes (CNTs)) have been extensively investigated as potential sensor platforms due to effective and practical manipulation of their physical and chemical properties by functionalization/doping with chemical groups suitable for novel nanocarrier systems. CNTs play a significant role in biomedical applications due to rapid development of synthetic methods, structural integration, surface area-controlled heteroatom doping, and electrical conductivity. This review article comprehensively summarized recent trends in biomedical science and technologies utilizing a promising nanomaterial of CNTs in disease diagnosis and therapeutics, based on their biocompatibility and significance in drug delivery, implants, and bio imaging. Biocompatibility of CNTs is essential for designing effective and practical electronic applications in the biomedical field particularly due to their growing potential in the delivery of anticancer agents. Furthermore, functionalized CNTs have been shown to exhibit advanced electrochemical properties, responsible for functioning of numerous oxidase and dehydrogenase based amperometric biosensors. Finally, faster signal transduction by CNTs allows charge transfer between underlying electrode and redox centres of biomolecules (enzymes).
Assuntos
Fulerenos/química , Nanotubos de Carbono/química , Animais , Técnicas Biossensoriais/métodos , Sistemas de Liberação de Medicamentos/métodos , Eletrônica/métodos , Humanos , Próteses e ImplantesRESUMO
Purpose: The intramuscular nerve distribution in the extraocular muscles is important for understanding their function. This study aimed to determine the intramuscular nerve distribution of the oculomotor nerve within the inferior oblique muscle (IO) using Sihler's staining.Method: Seventy-two IOs from 50 formalin-embalmed cadavers were investigated. The IO including its branch of the oculomotor nerve was finely dissected from its origin to its insertion point into the sclera. The total length of the muscle and its width were measured. The intramuscular nerve course was investigated after performing Sihler's staining, which is a whole-mount nerve-staining technique that stains the nerves while rendering other soft tissues either translucent or transparent.Results: The total length of the muscle and muscle width were 30.0 ± 2.8 mm (mean±standard deviation), 8.8 ± 1.2 mm, respectively. The oculomotor nerve enters the IO around the middle of the muscle and then divides into multiple smaller branches without distinct subdivisions. The intramuscular nerve distribution within the IO has a root-like arborization and supplies the entire width of the muscle. The Sihler's stained intramuscular nerve course (covering a length of 7.6 ± 1.2 mm) finishes around the distal one-third of the IO in gross observations.Conclusion: Sihler's staining is a useful technique for visualizing the gross nerve distribution of the IO. This new information about the nerve distribution and morphological features will improve the understanding of the biomechanics of the IO.
Assuntos
Músculos Oculomotores/inervação , Nervo Oculomotor/anatomia & histologia , Idoso , Idoso de 80 Anos ou mais , Cadáver , Corantes , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Junção Neuromuscular/anatomia & histologia , Coloração e RotulagemRESUMO
BACKGROUND: Vision loss caused by retrograde occlusion of the central retinal artery is a serious complication of cosmetic filler injections. Salvage methods that involve applying hyaluronidases in the retrobulbar space to degrade filler materials have been proposed recently for rescuing the retinal circulation in an ophthalmic emergency. METHODS: Sixty-six eyeballs and orbital contents were extracted from formalin-embalmed cadavers and dissected carefully to examine the topographic relationship of the central retinal artery and optic nerve. To observe the three-dimensional course of a central retinal artery that invaginates into the optic nerve, serial sections reconstructed at 100-µm intervals using software were visualized in 11 specimens. RESULTS: The central retinal artery ramified from the ophthalmic artery and entered the optic nerve inferiorly at 8.7 ± 1.7 mm (mean ± SD) from the posterior margin of the eyeball. The intraneural course of a central retinal artery changed acutely between the periorbital environment of the fibrous optic nerve sheath, intermediate subarachnoid spaces, and center of the optic nerve stroma. CONCLUSION: When applying a retrobulbar approach for central retinal artery reperfusion with hyaluronidases, the reliable access route is suggested to be at a depth of 3.0 to 3.5 cm from the border of the inferolateral orbital rim, based on consideration of the entry point of the central retinal artery into the optic nerve.
Assuntos
Hialuronoglucosaminidase/administração & dosagem , Reperfusão/métodos , Oclusão da Artéria Retiniana/patologia , Artéria Retiniana/patologia , Idoso , Idoso de 80 Anos ou mais , Cadáver , Preenchedores Dérmicos/efeitos adversos , Humanos , Pessoa de Meia-Idade , Soluções Oftálmicas/administração & dosagem , Oclusão da Artéria Retiniana/induzido quimicamente , Terapia de Salvação/métodosRESUMO
The aim of this study was to identify the three-dimensional topography of the sphenoid door jamb (SDJ) in the lateral orbital wall and to propose navigational guidelines for safe deep lateral decompression using surgical landmarks. The 120 orbits and SDJs of 60 subjects were three-dimensionally reconstructed using Mimics software. The mean volumes of the orbit and SDJ were 24.3 mm3 and 2.0 mm3, respectively. The mean distances from the lateral orbital margin (LOM) to the anterior and posterior margins of the SDJ were 13.2 and 36.3 mm, respectively. The mean distances from the superior orbital fissure to the LOM and to the posterior margin of the SDJ were 40.2 mm and 4.6 mm, respectively. The mean distances from the inferior orbital fissure (IOF) to the anterior and posterior margins of the SDJ were 3.8 mm and 20.5 mm, respectively. In the superior approach of the orbit, it can be predicted that the area up to 3 cm posterior from the LOM is safe, while 1 cm posterior from the safe zone could be a dangerous zone. In the inferior approach of the orbit, the safe area will be about 1 cm posterior from the anterior tip of the IOF, and the area up to 1 cm posterior from the safe zone should be approached with extreme care.
RESUMO
Amorphous metal-oxide semiconductors (AOSs) such as indium-gallium-zinc-oxide (IGZO) as an active channel have attracted substantial interests with regard to high-performance thin-film transistors (TFTs). Recently, intensive and extensive studies of flexible and/or wearable AOS-based TFTs fabricated by solution-process have been reported for emerging approaches based on device configuration and fabrication process. However, several challenges pertaining to practical and effective solution-process technologies remain to be resolved before low-power consuming AOS-based TFTs for wearable electronics can be realized. In this paper, we investigate the non-thermal annealing processes for sol-gel based metal-oxide semiconductor and dielectric films fabricated by deep ultraviolet (DUV) photo and microwave annealing at low temperature, compared to the conventional thermal annealing at high temperature. A comprehensive investigation including a comparative analysis of the effects of DUV photo and microwave annealing on the degree of metal-oxide-metal networks in amorphous IGZO and high-dielectric-constant (high-k) aluminum oxide (Al2O3) films and device performance of IGZO-TFTs in a comparison with conventional thermal annealing at 400 °C was conducted. We also demonstrate the feasibility of wearable IGZO-TFTs with Al2O3 dielectrics on solution-processed polyimide films exhibiting a high on/off current ratio of 5 × 104 and field effect mobility up to 1.5 cm2/V-s operating at 1 V. In order to reduce the health risk and power consumption during the operation of wearable electronics, the operating voltage of IGZO-TFTs fabricated by non-thermal annealing at low temperature was set below ~1 V. The mechanical stability of wearable IGZO-TFTs fabricated by an all-solution-process except metal electrodes, against cyclic bending tests with diverse radius of curvatures in real-time was investigated. Highly stable and robust flexible IGZO-TFTs without passivation films were achieved even under continuous flexing with a curvature radius of 12 mm.
RESUMO
High dielectric constant (high-k) materials have been extensively investigated for low-voltage operating electronics. In recent years, solution-processed high-k dielectrics have been of technological interests in low fabrication cost, large area process and good film quality, compared to the vacuum-process technology. In this paper, we demonstrate solution-processed aluminum oxide (Al2O3) dielectrics for high performance solution-processed indium-gallium-zinc-oxide (IGZO) thin-film transistors (TFTs) operating at low voltage. The material and electrical properties of Al2O3 dielectrics fabricated at different post-annealing temperatures were analyzed by atomic force microscopy, scanning electron microscopy, X-ray diffraction and capacitance-voltage measurements. We also investigate the effect of crystalline Al2O3 dielectrics on the device performance of solution-processed IGZO TFTs. It is concluded that improved interfacial characteristics of crystalline Al2O3 dielectrics enhance the device performance of solution-processed IGZO TFTs operating at 3 V.
RESUMO
BACKGROUND: Vision loss and skin necrosis caused by an accidental intraarterial embolism or vascular compression are rare but devastating complications when injecting filler materials into the face. METHODS: The external and internal diameters and wall thicknesses of the facial artery and its branches were measured from 41 formalin-embalmed cadavers after removing connective tissues attached to the arterial wall. RESULTS: The diameter and thickness of the facial artery exhibited significant interregional differences. The external and internal diameters of the facial artery were 1.9 ± 0.4 and 1.2 ± 0.3 mm (mean ± SD), respectively, at the inferior border of the mandible; 1.7 ± 0.3 and 1.2 ± 0.3 mm in the vicinity of the inferior labial artery; 1.5 ± 0.3 and 1.0 ± 0.3 mm at the mouth corner; 1.4 ± 0.3 and 0.9 ± 0.2 mm in the vicinity of the superior labial artery; and 1.1 ± 0.2 and 0.7 ± 0.2 mm in the vicinity of the lateral nasal artery. The external and internal diameters at the proximal parts of the inferior labial artery, superior labial artery, and lateral nasal artery were 1.0 ± 0.3 and 0.6 ± 0.2 mm, 0.9 ± 0.3 and 0.6 ± 0.2 mm, and 0.8 ± 0.2 and 0.5 ± 0.2 mm, respectively. CONCLUSION: Morphometric examinations of the facial artery under stereomicroscope observation as performed in the present study are expected to be more accurate than direct measurements obtained during cadaveric dissection or conventional histologic evaluations.
Assuntos
Artérias/anatomia & histologia , Técnicas Cosméticas/efeitos adversos , Preenchedores Dérmicos/administração & dosagem , Face/irrigação sanguínea , Injeções/efeitos adversos , Erros Médicos/prevenção & controle , Cadáver , Humanos , Ácido HialurônicoRESUMO
PURPOSE: The intramuscular nerve distribution in the extraocular muscles may be crucial for understanding their physiological and pathological responses. This study aimed to determine the oculomotor nerve distribution in the medial rectus muscle (MR) using Sihler's staining. METHOD: Thirty-seven MRs from 23 cadavers were investigated. The MR including the oculomotor nerve was finely dissected from its origin to its insertion point into the sclera. The total length of the muscle-belly, tendon length and maximum width of the muscle were measured. We evaluated the pattern of distribution and the length of the intramuscular nerve distribution by gross observation after performing Sihler's staining, which is a method for visualizing the distribution of nerve fibers without alteration of the nerve. RESULTS: The total length of the muscle-belly, tendon length, and muscle width were 37.6 ± 4.6 mm, 4.4 ± 1.9 mm, and 10 ± 1.8 mm, respectively. The oculomotor nerve enters the MR at a mean of two-fifths along the muscle (24 ± 2.0 mm posterior to the insertion point) and then typically divides into a few branches (mean of 2.1). The intramuscular nerve distribution showed a Y-shaped ramification, forming the terminal nerve plexus, and its course typically finished at around 17 ± 1.5 mm posterior to the muscle insertion point by gross observation. The nerve plexus in the upper part generally coursed more distally than the lower part. CONCLUSION: This new information regarding the nerve distribution pattern of MR will be helpful for understanding MR function and the diverse pathophysiology of strabismus.
Assuntos
Músculos Oculomotores/inervação , Nervo Oculomotor/anatomia & histologia , Idoso , Idoso de 80 Anos ou mais , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Fibras Nervosas/fisiologia , Coloração e Rotulagem/métodosRESUMO
We demonstrate highly sensitive and selective gas sensors based on solution-processed single-wall carbon nanotube (SWCNT) random networks for the detection of nitric oxide (NO) down to the ppb-level operating at room temperature. The proposed gas sensors exhibited a response of 50% under both inert and air atmospheres with a theoretical detection limit of 0.2 ppb and a selectivity toward different target gases of volatile organic compounds, including benzene, toluene, and ammonia. The outstanding sensing performance was realized by functionalizing SWCNT random networks with polyethylenimine (PEI), which possesses a repeating structure of amine groups. We investigate the functionalization properties of SWCNT random networks by using atomic force microscopy, X-ray photoelectron spectroscopy and Raman spectroscopy and the sensing mechanism in the proposed NO gas sensors. We note that solution-process technologies, from the deposition of SWCNT random networks to the polymeric functionalization of amine groups, were employed at room temperature under an ambient atmosphere to fabricate highly sensitive and selective NO gas sensors, which are based on low-cost, effective, and scalable merits in the industry of sensors. We also investigate the effect of ultraviolet (UV) irradiation on the recovery time underlying the sensing mechanism. Photodesorption energy obtained by UV irradiation reduced the recovery time of the proposed NO gas sensors to within a few tens of seconds. We believe that this work is a promising and practical approach for realizing health-care monitoring systems by real-time analyzing NO gas at the ppb level in the field of biosensors.