Effect of dissolved KOH and NaCl on the solubility of water in hydrogen: A Monte Carlo simulation study.

Vapor-Liquid Equilibria (VLE) of hydrogen (H2) and aqueous electrolyte (KOH and NaCl) solutions are central to numerous industrial applications such as alkaline electrolysis and underground hydrogen storage. Continuous fractional component Monte Carlo simulations are performed to compute the VLE of H2 and aqueous electrolyte solutions at 298-423 K, 10-400 bar, 0-8 mol KOH/kg water, and 0-6 mol NaCl/kg water. The densities and activities of water in aqueous KOH and NaCl solutions are accurately modeled (within 2% deviation from experiments) using the non-polarizable Madrid-2019 Na+/Cl- ion force fields for NaCl and the Madrid-Transport K+ and Delft Force Field of OH- for KOH, combined with the TIP4P/2005 water force field. A free energy correction (independent of pressure, salt type, and salt molality) is applied to the computed infinite dilution excess chemical potentials of H2 and water, resulting in accurate predictions (within 5% of experiments) for the solubilities of H2 in water and the saturated vapor pressures of water for a temperature range of 298-363 K. The compositions of water and H2 are computed using an iterative scheme from the liquid phase excess chemical potentials and densities, in which the gas phase fugacities are computed using the GERG-2008 equation of state. For the first time, the VLE of H2 and aqueous KOH/NaCl systems are accurately captured with respect to experiments (i.e., for both the liquid and gas phase compositions) without compromising the liquid phase properties or performing any refitting of force fields.

Accurate Free Energies of Aqueous Electrolyte Solutions from Molecular Simulations with Non-polarizable Force Fields.

Non-polarizable force fields fail to accurately predict free energies of aqueous electrolytes without compromising the predictive ability for densities and transport properties. A new approach is presented in which (1) TIP4P/2005 water and scaled charge force fields are used to describe the interactions in the liquid phase and (2) an additional Effective Charge Surface (ECS) is used to compute free energies at zero additional computational expense. The ECS is obtained using a single temperature-independent charge scaling parameter per species. Thereby, the chemical potential of water and the free energies of hydration of various aqueous salts (e.g., NaCl and LiCl) are accurately described (deviations less than 5% from experiments), in sharp contrast to calculations where the ECS is omitted (deviations larger than 20%). This approach enables accurate predictions of free energies of aqueous electrolyte solutions using non-polarizable force fields, without compromising liquid-phase properties.

Computation of Electrical Conductivities of Aqueous Electrolyte Solutions: Two Surfaces, One Property.

In this work, we computed electrical conductivities under ambient conditions of aqueous NaCl and KCl solutions by using the Einstein-Helfand equation. Common force fields (charge q = ±1 e) do not reproduce the experimental values of electrical conductivities, viscosities, and diffusion coefficients. Recently, we proposed the idea of using different charges to describe the potential energy surface (PES) and the dipole moment surface (DMS). In this work, we implement this concept. The equilibrium trajectories required to evaluate electrical conductivities (within linear response theory) were obtained by using scaled charges (with the value q = ±0.75 e) to describe the PES. The potential parameters were those of the Madrid-Transport force field, which accurately describe viscosities and diffusion coefficients of these ionic solutions. However, integer charges were used to compute the conductivities (thus describing the DMS). The basic idea is that although the scaled charge describes the ion-water interaction better, the integer charge reflects the value of the charge that is transported due to the electric field. The agreement obtained with experiments is excellent, as for the first time electrical conductivities (and the other transport properties) of NaCl and KCl electrolyte solutions are described with high accuracy for the whole concentration range up to their solubility limit. Finally, we propose an easy way to obtain a rough estimate of the actual electrical conductivity of the potential model under consideration using the approximate Nernst-Einstein equation, which neglects correlations between different ions.

A New Force Field for OH- for Computing Thermodynamic and Transport Properties of H2 and O2 in Aqueous NaOH and KOH Solutions.

The thermophysical properties of aqueous electrolyte solutions are of interest for applications such as water electrolyzers and fuel cells. Molecular dynamics (MD) and continuous fractional component Monte Carlo (CFCMC) simulations are used to calculate densities, transport properties (i.e., self-diffusivities and dynamic viscosities), and solubilities of H2 and O2 in aqueous sodium and potassium hydroxide (NaOH and KOH) solutions for a wide electrolyte concentration range (0-8 mol/kg). Simulations are carried out for a temperature and pressure range of 298-353 K and 1-100 bar, respectively. The TIP4P/2005 water model is used in combination with a newly parametrized OH- force field for NaOH and KOH. The computed dynamic viscosities at 298 K for NaOH and KOH solutions are within 5% from the reported experimental data up to an electrolyte concentration of 6 mol/kg. For most of the thermodynamic conditions (especially at high concentrations, pressures, and temperatures) experimental data are largely lacking. We present an extensive collection of new data and engineering equations for H2 and O2 self-diffusivities and solubilities in NaOH and KOH solutions, which can be used for process design and optimization of efficient alkaline electrolyzers and fuel cells.

Coupling mesoscale transport to catalytic surface reactions in a hybrid model.

In heterogeneous catalysis, reactivity and selectivity are not only influenced by chemical processes occurring on catalytic surfaces but also by physical transport phenomena in the bulk fluid and fluid near the reactive surfaces. Because these processes take place at a large range of time and length scales, it is a challenge to model catalytic reactors, especially when dealing with complex surface reactions that cannot be reduced to simple mean-field boundary conditions. As a particle-based mesoscale method, Stochastic Rotation Dynamics (SRD) is well suited for studying problems that include both microscale effects on surfaces and transport phenomena in fluids. In this work, we demonstrate how to simulate heterogeneous catalytic reactors by coupling an SRD fluid with a catalytic surface on which complex surface reactions are explicitly modeled. We provide a theoretical background for modeling different stages of heterogeneous surface reactions. After validating the simulation method for surface reactions with mean-field assumptions, we apply the method to non-mean-field reactions in which surface species interact with each other through a Monte Carlo scheme, leading to island formation on the catalytic surface. We show the potential of the method by simulating a more complex three-step reaction mechanism with reactant dissociation.

Reversible Hydrogen Storage in Metal-Decorated Honeycomb Borophene Oxide.

Two-dimensional (2D) boron-based materials are receiving much attention as H2 storage media due to the low atomic mass of boron and the stability of decorating alkali metals on the surface, which enhance interactions with H2. This work investigates the suitability of Li, Na, and K decorations on 2D honeycomb borophene oxide (B2O) for H2 storage, using dispersion corrected density functional theory (DFT-D2). A high theoretical gravimetric density of 8.3 wt % H2 is achieved for the Li-decorated B2O structure. At saturation, each Li binds to two H2 with an average binding energy of -0.24 eV/H2. Born-Oppenheimer molecular dynamics simulations at temperatures of 100, 300, and 500 K demonstrate the stability of the Li-decorated structure and the H2 desorption behavior at different temperatures. Our findings indicate that Li-decorated 2D B2O is a promising material for reversible H2 storage and recommend experimental investigation of 2D B2O as a potential H2 storage medium.