Residue-Specific Incorporation of the Non-Canonical Amino Acid Norleucine Improves Lipase Activity on Synthetic Polyesters.

Environmentally friendly functionalization and recycling processes for synthetic polymers have recently gained momentum, and enzymes play a central role in these procedures. However, natural enzymes must be engineered to accept synthetic polymers as substrates. To enhance the activity on synthetic polyesters, the canonical amino acid methionine in Thermoanaerobacter thermohydrosulfuricus lipase (TTL) was exchanged by the residue-specific incorporation method for the more hydrophobic non-canonical norleucine (Nle). Strutural modelling of TTL revealed that residues Met-114 and Met-142 are in close vicinity of the active site and their replacement by the norleucine could modulate the catalytic activity of the enzyme. Indeed, hydrolysis of the polyethylene terephthalate model substrate by the Nle variant resulted in significantly higher amounts of release products than the Met variant. A similar trend was observed for an ionic phthalic polyester containing a short alkyl diol (C5). Interestingly, a 50% increased activity was found for TTL [Nle] towards ionic phthalic polyesters containing different ether diols compared to the parent enzyme TTL [Met]. These findings clearly demonstrate the high potential of non-canonical amino acids for enzyme engineering.

Enzymatic Degradation of Star Poly(ε-Caprolactone) with Different Central Units.

Four-arm star poly(ε-caprolactone) with a central poly(ethylene glycol) PEG unit bridged with 2,2-bis(methyl) propionic acid, (PCL)2-b-PEG-b-(PCL)2, and six-arm star PCL homopolymer with a central dipentaerythritol units were hydrolysed using a lipase from Pseudomonas cepacia and the Thermobifida cellulosilytica cutinase Thc_Cut1. For comparative analysis, Y-shaped copolymers containing methylated PEG bridged with bisMPA, MePEG-(PCL)2, and linear triblock copolymers PCL-b-PEG-b-PCL were also subjected to enzymatic hydrolysis. The hydrophilic nature of the polymers was determined using contact angle analysis, showing that a higher PEG content exhibited a lower contact angle and higher surface wettability. Enzymatic hydrolysis was monitored by % mass loss, scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). A higher rate of mass loss was found for lipase catalysed hydrolysis of those polymers with the highest PEG content, leading to significant surface erosion and increase in crystallinity within the first two days. Liquid chromatography (LC) and size exclusion chromatography (SEC) of samples incubated with the cutinase showed a significant decrease in molecular weight, increase in dispersity, and release of ε-CL monomer units after 6 h of incubation.

Enzymes as Enhancers for the Biodegradation of Synthetic Polymers in Wastewater.

Synthetic polyesters are today the second-largest class of ingredients in household products and are entering wastewater treatment plants (WWTPs) after product utilization. One approach to improve polymer biodegradation in wastewater would be to complement current processes with polyester-hydrolyzing enzymes and their microbial producers. In this study, the hydrolysis of poly(oxyethylene terephthalate) polymer by hydrolases from wastewater microorganisms was investigated in vitro and under realistic WWTP conditions. An esterase and a cutinase from Pseudomonas pseudoalcaligenes and a lipase from Pseudomonas pelagia were heterologously expressed in Escherichia coli BL21-Gold(DE3) and were purified by a C-terminal His6 tag. The hydrolases were proven to hydrolyze the polymer effectively, which is a prerequisite for further biodegradation. The hydrolases maintained high activity up to 50 % upon lowering the temperature from 28 to 15 °C to mimic WWTP conditions. The hydrolases were also not inhibited by the wastewater matrix. Polyester-hydrolyzing enzymes active under WWTP conditions and their microbial producers thus have the potential to improve biological treatment of wastewater rich in synthetic polymers.

Polyol Structure Influences Enzymatic Hydrolysis of Bio-Based 2,5-Furandicarboxylic Acid (FDCA) Polyesters.

Polyesters of 2,5-furandicarboxylic acid (FDCA) have gained attention as they can be regarded as the bio-based alternatives to the petroleum-based polyesters of terephthalic acid. However, only little is known about the biodegradation and enzymatic hydrolysis of FDCA-based polyesters. This work aims to investigate the influence of different polyols on enzymatic hydrolysis of FDCA-based polyesters. A series of polyesters containing various polyols are synthesized and analyzed regarding susceptibility to enzymatic hydrolysis by cutinase 1 from Thermobifida cellulosilytica (Thc_Cut1). FDCA-based polyesters' number average molecular weight (Mn ) ranged from 9360-35 800 g mol-1 according to gel permeation chromatography (GPC) analysis. Differential scanning calorimetry (DSC) analyses show decreasing glass transition temperature (Tg ) with increasing diol chain length. Crystallinity of all polyesters is below 1% except for polyesters containing 1,6-hexanediol, 1,8-octanediol, and 1,12-dodecanediol for which calculated crystallinities are 27, 37, and 30%, respectively. Thc_Cut1 hydrolyzes all tested polyesters with preference for polyesters containing 1,5-pentanediol and 1,9-nonanediol (57.7 ± 7.5 and 52.8 ± 4.0% released FDCA). Enzyme activity increases when the linear diol 1,3-propanediol is replaced by the branched analog 1,2-propanediol or ethoxy units are introduced into the polyester chain. The results will contribute to expand the knowledge of microbial biodegradation of FDCA-based polyesters.

Hydrolysis of Ionic Phthalic Acid Based Polyesters by Wastewater Microorganisms and Their Enzymes.

Water-soluble polyesters are used in a range of applications today and enter wastewater treatment plants after product utilization. However, little is known about extracellular enzymes and aquatic microorganisms involved in polyester biodegradation and mineralization. In this study, structurally different ionic phthalic acid based polyesters (the number-average molecular weights (Mn) 1770 to 10 000 g/mol and semi crystalline with crystallinity below 1%) were synthesized in various combinations. Typical wastewater microorganisms like Pseudomonas sp. were chosen for in-silico screening toward polyester hydrolyzing enzymes. Based on the in-silico search, a cutinase from Pseudomonas pseudoalcaligenes (PpCutA) and a putative lipase from Pseudomonas pelagia (PpelaLip) were identified. The enzymes PpCutA and PpelaLip were demonstrated to hydrolyze all structurally different polyesters. Activities on all the polyesters were also confirmed with the strains P. pseudoalcaligenes and P. pelagia. Parameters identified to enhance hydrolysis included increased water solubility and polyester hydrophilicity as well as shorter diol chain lengths. For example, polyesters containing 1,2-ethanediol were hydrolyzed faster than polyesters containing 1,8-octanediol. Interestingly, the same trend was observed in biodegradation experiments. This information is important to gain a better mechanistic understanding of biodegradation processes of polyesters in WWTPs where the extracellular enzymatic hydrolysis seems to be the limiting step.

A new arylesterase from Pseudomonas pseudoalcaligenes can hydrolyze ionic phthalic polyesters.

Extracellular enzymes are assumed to be responsible for the initial and rate limiting step in biodegradation of polymers. Mainly enzymes with aliphatic esters as their natural substrates (e.g. lipase, cutinases) have until now been evaluated for polyester hydrolysis studies. However, the potential of enzymes with aromatic esters as their natural substrates (e.g. arylesterases) have been neglected although many types of polyester today contain aromatic moieties. Consequently, in order to elucidate biodegradation of phthalic polyesters in aquatic systems, a novel arylesterase (PpEst) was investigated related to hydrolysis of ionic phthalic polyesters. The hydrolysis of various ionic phthalic polyesters by PpEst was mechanistically studied. The polyester building blocks (terephthalic acid (TA), 5-sulfoisophthalic acid (NaSIP) and alkyl or ether diols) were systematically varied to investigate the impact on hydrolysis. PpEst effectively hydrolyzed all 14 synthetized ionic phthalic polyesters as indicated by released TA. However, no NaSIP was detected indicating that PpEst has a limited capacity to cleave bonds in close vicinity to the ionic monomer NaSIP. The systematic study indicated that increasing water solubility and hydrophilicity significantly enhanced hydrolysis. A higher release of TA was seen with increasing NaSIP ratio while up to 20 times more TA was released when alkyl diols were replaced by ether diol analogues. In contrast, cyclic and branched diols had a negative effect on hydrolysis when compared to linear diols. PpEst also revealed a linear release of TA over seven days for ether containing polyesters, indicating a very stable enzyme.

Polyol Structure and Ionic Moieties Influence the Hydrolytic Stability and Enzymatic Hydrolysis of Bio-Based 2,5-Furandicarboxylic Acid (FDCA) Copolyesters.

A series of copolyesters based on furanic acid and sulfonated isophthalic acid with various polyols were synthetized and their susceptibility to enzymatic hydrolysis by cutinase 1 from Thermobifida cellulosilytica (Thc_Cut1) investigated. All copolyesters consisted of 30 mol % 5-sulfoisophthalate units (NaSIP) and 70 mol % 2,5-furandicarboxylic acid (FDCA), while the polyol component was varied, including 1,2-ethanediol, 1,4-butanediol, 1,8-octanediol, diethylene glycol, triethylene glycol, or tetraethylene glycol. The composition of the copolyesters was confirmed by ¹H-NMR and the number average molecular weight (Mn) was determined by GPC to range from 2630 to 8030 g/mol. A DSC analysis revealed glass-transition temperatures (Tg) from 84 to 6 °C, which were decreasing with increasing diol chain length. The crystallinity was below 1% for all polyesters. The hydrolytic stability increased with the chain length of the alkyl diol unit, while it was generally higher for the ether diol units. Thc_Cut1 was able to hydrolyze all of the copolyesters containing alkyl diols ranging from two to eight carbon chain lengths, while the highest activities were detected for the shorter chain lengths with an amount of 13.6 ± 0.7 mM FDCA released after 72 h of incubation at 50 °C. Faster hydrolysis was observed when replacing an alkyl diol by ether diols, as indicated, e.g., by a fivefold higher release of FDCA for triethylene glycol when compared to 1,8-octanediol. A positive influence of introducing ionic phthalic acid was observed while the enzyme preferentially cleaved ester bonds associated to the non-charged building blocks.

PpEst is a novel PBAT degrading polyesterase identified by proteomic screening of Pseudomonas pseudoalcaligenes.

A novel esterase, PpEst, that hydrolyses the co-aromatic-aliphatic polyester poly(1,4-butylene adipate-co-terephthalate) (PBAT) was identified by proteomic screening of the Pseudomonas pseudoalcaligenes secretome. PpEst was induced by the presence of PBAT in the growth media and had predicted arylesterase (EC 3.1.1.2) activity. PpEst showed polyesterase activity on both whole and milled PBAT film releasing terephthalic acid and 4-(4-hydroxybutoxycarbonyl)benzoic acid while end product inhibition by 4-(4-hydroxybutoxycarbonyl)benzoic acid was observed. Modelling of an aromatic polyester mimicking oligomer into the PpEst active site indicated that the binding pocket could be big enough to accommodate large polymers. This is the first report of a PBAT degrading enzyme being identified by proteomic screening and shows that this approach can contribute to the discovery of new polymer hydrolysing enzymes. Moreover, these results indicate that arylesterases could be an interesting enzyme class for identifications of polyesterases.

Enzymatic hydrolysis of poly(ethylene furanoate).

The urgency of producing new environmentally-friendly polyesters strongly enhanced the development of bio-based poly(ethylene furanoate) (PEF) as an alternative to plastics like poly(ethylene terephthalate) (PET) for applications that include food packaging, personal and home care containers and thermoforming equipment. In this study, PEF powders of various molecular weights (6, 10 and 40kDa) were synthetized and their susceptibility to enzymatic hydrolysis was investigated for the first time. According to LC/TOF-MS analysis, cutinase 1 from Thermobifida cellulosilytica liberated both 2,5-furandicarboxylic acid and oligomers of up to DP4. The enzyme preferentially hydrolyzed PEF with higher molecular weights but was active on all tested substrates. Mild enzymatic hydrolysis of PEF has a potential both for surface functionalization and monomers recycling.

Characterization of a poly(butylene adipate-co-terephthalate)- hydrolyzing lipase from Pelosinus fermentans.

Certain α/ß hydrolases have the ability to hydrolyze synthetic polyesters. While their partial hydrolysis has a potential for surface functionalization, complete hydrolysis allows recycling of valuable building blocks. Although knowledge about biodegradation of these materials is important regarding their fate in the environment, it is currently limited to aerobic organisms. A lipase from the anaerobic groundwater organism Pelosinus fermentans DSM 17108(PfL1) was cloned and expressed in Escherichia coli BL21-Gold (DE3) and purified from the cell extract. Biochemical characterization with small substrates showed thermoalkalophilic properties (Topt=50 °C, pHopt=7.5) and higher activity towards para-nitrophenyl octanoate (12.7 U mg(-1)) compared to longer and shorter chain lengths (C14 0.7 U mg(-1) and C2 4.3 U mg(-1), respectively). Crystallization and determination of the 3-D structure displayed the presence of a lid structure and a zinc ion surrounded by an extra domain. These properties classify the enzyme into the I.5 lipase family. PfL1 is able to hydrolyze poly(1,4-butylene adipate-co-terephthalate) (PBAT) polymeric substrates. The hydrolysis of PBAT showed the release of small building blocks as detected by liquid chromatography mass spectrometry (LC-MS). Protein dynamics seem to be involved with lid opening for the hydrolysis of PBAT by PfL1.