RESUMO
Transcription factors (TFs) intricately navigate the vast genomic landscape to locate and bind specific DNA sequences for the regulation of gene expression programs. These interactions occur within a dynamic cellular environment, where both DNA and TF proteins experience continual chemical and structural perturbations, including epigenetic modifications, DNA damage, mechanical stress, and post-translational modifications (PTMs). While many of these factors impact TF-DNA binding interactions, understanding their effects remains challenging and incomplete. This review explores the existing literature on these dynamic changes and their potential impact on TF-DNA interactions.
RESUMO
Programmable self-assembly has seen an explosion in the diversity of synthetic crystalline materials, but developing strategies that target "self-limiting" assemblies has remained a challenge. Among these, self-closing structures, in which the local curvature defines the finite global size, are prone to polymorphism due to thermal bending fluctuations, a problem that worsens with increasing target size. Here, we show that assembly complexity can be used to eliminate this source of polymorphism in the assembly of tubules. Using many distinct components, we prune the local density of off-target geometries, increasing the selectivity of the tubule width and helicity to nearly 100%. We further show that by reducing the design constraints to target either the pitch or the width alone, fewer components are needed to reach complete selectivity. Combining experiments with theory, we reveal an economical limit, which determines the minimum number of components required to create arbitrary assembly sizes with full selectivity.
RESUMO
Chagas disease is caused by the parasite Trypanosoma cruzi and affects over 7 million people worldwide. The two actual treatments, Benznidazole (Bzn) and Nifurtimox, cause serious side effects due to their high toxicity leading to treatment abandonment by the patients. In this work, we propose DNA G-quadruplexes (G4) as potential therapeutic targets for this infectious disease. We have found 174 PQS per 100,000 nucleotides in the genome of T. cruzi and confirmed G4 formation of three frequent motifs. We synthesized a family of 14 quadruplex ligands based in the dithienylethene (DTE) scaffold and demonstrated their binding to these identified G4 sequences. Several DTE derivatives exhibited micromolar activity against epimastigotes of four different strains of T. cruzi, in the same concentration range as Bzn. Compounds L3 and L4 presented remarkable activity against trypomastigotes, the active form in blood, of T. cruzi SOL strain (IC50 = 1.5-3.3 µM, SI = 25-40.9), being around 40 times more active than Bzn and displaying much better selectivity indexes.
Assuntos
Doença de Chagas , Quadruplex G , Tripanossomicidas , Trypanosoma cruzi , Trypanosoma cruzi/efeitos dos fármacos , Quadruplex G/efeitos dos fármacos , Ligantes , Doença de Chagas/tratamento farmacológico , Tripanossomicidas/farmacologia , Tripanossomicidas/química , Tripanossomicidas/síntese química , Humanos , Estrutura Molecular , Relação Estrutura-Atividade , Relação Dose-Resposta a Droga , Testes de Sensibilidade Parasitária , Antiparasitários/farmacologia , Antiparasitários/química , Antiparasitários/síntese químicaRESUMO
This review accompanies the Special Issue on the subject of physical virology, which features work presented at the recent Gordon Research Conference (GRC) on this topic [...].
Assuntos
Virologia , Vírus , Vírus/genética , Humanos , Congressos como Assunto , AnimaisRESUMO
We propose and investigate an extension of the Caspar-Klug symmetry principles for viral capsid assembly to the programmable assembly of size-controlled triply periodic polyhedra, discrete variants of the Primitive, Diamond, and Gyroid cubic minimal surfaces. Inspired by a recent class of programmable DNA origami colloids, we demonstrate that the economy of design in these crystalline assemblies-in terms of the growth of the number of distinct particle species required with the increased size-scale (e.g., periodicity)-is comparable to viral shells. We further test the role of geometric specificity in these assemblies via dynamical assembly simulations, which show that conditions for simultaneously efficient and high-fidelity assembly require an intermediate degree of flexibility of local angles and lengths in programmed assembly. Off-target misassembly occurs via incorporation of a variant of disclination defects, generalized to the case of hyperbolic crystals. The possibility of these topological defects is a direct consequence of the very same symmetry principles that underlie the economical design, exposing a basic tradeoff between design economy and fidelity of programmable, size controlled assembly.
RESUMO
Active nematics are dense systems of rodlike particles that consume energy to drive motion at the level of the individual particles. They exist in natural systems like biological tissues and artificial materials such as suspensions of self-propelled colloidal particles or synthetic microswimmers. Active nematics have attracted significant attention in recent years due to their spectacular nonequilibrium collective spatiotemporal dynamics, which may enable applications in fields such as robotics, drug delivery, and materials science. The director field, which measures the direction and degree of alignment of the local nematic orientation, is a crucial characteristic of active nematics and is essential for studying topological defects. However, determining the director field is a significant challenge in many experimental systems. Although director fields can be derived from images of active nematics using traditional imaging processing methods, the accuracy of such methods is highly sensitive to the settings of the algorithms. These settings must be tuned from image to image due to experimental noise, intrinsic noise of the imaging technology, and perturbations caused by changes in experimental conditions. This sensitivity currently limits automatic analysis of active nematics. To address this, we developed a machine learning model for extracting reliable director fields from raw experimental images, which enables accurate analysis of topological defects. Application of the algorithm to experimental data demonstrates that the approach is robust and highly generalizable to experimental settings that are different from those in the training data. It could be a promising tool for investigating active nematics and may be generalized to other active matter systems.
RESUMO
Self-assembly of complex and functional materials remains a grand challenge in soft material science. Efficient assembly depends on a delicate balance between thermodynamic and kinetic effects, requiring fine-tuning affinities and concentrations of subunits. By contrast, we introduce an assembly paradigm that allows large error-tolerance in the subunit affinity and helps avoid kinetic traps. Our combined experimental and computational approach uses a model system of triangular subunits programmed to assemble into T = 3 icosahedral capsids comprising 60 units. The experimental platform uses DNA origami to create monodisperse colloids whose three-dimensional geometry is controlled to nanometer precision, with two distinct bonds whose affinities are controlled to kBT precision, quantified in situ by static light scattering. The computational model uses a coarse-grained representation of subunits, short-ranged potentials, and Langevin dynamics. Experimental observations and modeling reveal that when the bond affinities are unequal, two distinct hierarchical assembly pathways occur, in which the subunits first form dimers in one case and pentamers in another. These hierarchical pathways produce complete capsids faster and are more robust against affinity variation than egalitarian pathways, in which all binding sites have equal strengths. This finding suggests that hierarchical assembly may be a general engineering principle for optimizing self-assembly of complex target structures.
Assuntos
Capsídeo , Ciência dos Materiais , Capsídeo/metabolismo , Proteínas do Capsídeo/química , DNA/química , Cinética , Termodinâmica , Montagem de Vírus , Ciência dos Materiais/métodosRESUMO
Conjugation of aptamers to homogeneous catalysts ("nucleoapzymes"), heterogeneous nanoparticle catalysts ("aptananozymes"), and photocatalysts ("photoaptazymes") yields superior catalytic/photocatalytic hybrid nanostructures emulating functions of native enzymes and photosystems. The concentration of the substrate in proximity to the catalytic sites ("molarity effect") or spatial concentration of electron-acceptor units in spatial proximity to the photosensitizers, by aptamer-ligand complexes, leads to enhanced catalytic/photocatalytic efficacies of the hybrid nanostructures. This is exemplified by sets of "nucleoapzymes" composed of aptamers conjugated to the hemin/G-quadruplex DNAzymes or metal-ligand complexes as catalysts, catalyzing the oxidation of dopamine to aminochrome, oxygen-insertion into the ArâH moiety of tyrosinamide and the subsequent oxidation of the catechol product into aminochrome, or the hydrolysis of esters or ATP. Also, aptananozymes consisting of aptamers conjugated to Cu2+ - or Ce4+ -ion-modified C-dots or polyadenine-stabilized Au nanoparticles acting as catalysts oxidizing dopamine or operating bioreactor biocatalytic cascades, are demonstrated. In addition, aptamers conjugated to the Ru(II)-tris-bipyridine photosensitizer or the Zn(II) protoporphyrin IX photosensitizer provide supramolecular photoaptazyme assemblies emulating native photosynthetic reaction centers. Effective photoinduced electron transfer followed by the catalyzed synthesis of NADPH or the evolution of H2 is demonstrated by the photosystems. Structure-function relationships dictate the catalytic and photocatalytic efficacies of the systems.
Assuntos
Indolquinonas , Nanopartículas Metálicas , Fármacos Fotossensibilizantes , Dopamina , Ligantes , Ouro , Oligonucleotídeos , CatáliseRESUMO
Virus-like particles (VLPs) are noninfectious nanocapsules that can be used for drug delivery or vaccine applications. VLPs can be assembled from virus capsid proteins around a condensing agent, such as RNA, DNA, or a charged polymer. Electrostatic interactions play an important role in the assembly reaction. VLPs assemble from many copies of capsid protein, with a combinatorial number of intermediates. Hence, the mechanism of the reaction is poorly understood. In this paper, we combined solution small-angle X-ray scattering (SAXS), cryo-transmission electron microscopy (TEM), and computational modeling to determine the effect of ionic strength on the assembly of Simian Vacuolating Virus 40 (SV40)-like particles. We mixed poly(styrene sulfonate) with SV40 capsid protein pentamers at different ionic strengths. We then characterized the assembly product by SAXS and cryo-TEM. To analyze the data, we performed Langevin dynamics simulations using a coarse-grained model that revealed incomplete, asymmetric VLP structures consistent with the experimental data. We found that close to physiological ionic strength, [Formula: see text] VLPs coexisted with VP1 pentamers. At lower or higher ionic strengths, incomplete particles coexisted with pentamers and [Formula: see text] particles. Including the simulated structures was essential to explain the SAXS data in a manner that is consistent with the cryo-TEM images.
Assuntos
Proteínas do Capsídeo , Capsídeo , Proteínas do Capsídeo/química , Proteínas do Capsídeo/genética , Proteínas do Capsídeo/metabolismo , Capsídeo/química , Capsídeo/metabolismo , Estireno/análise , Estireno/metabolismo , Espalhamento a Baixo Ângulo , Difração de Raios X , Vírus 40 dos Símios/química , Vírus 40 dos Símios/genética , Vírus 40 dos Símios/metabolismo , Montagem de VírusRESUMO
Membrane fusion processes play key roles in biological transformations, such as endocytosis/exocytosis, signal transduction, neurotransmission, or viral infections, and substantial research efforts have been directed to emulate these functions by artificial means. The recognition and dynamic reconfiguration properties of nucleic acids provide a versatile means to induce membrane fusion. Here we address recent advances in the functionalization of liposomes or membranes with structurally engineered lipidated nucleic acids guiding the fusion of cell-like containments, and the biophysical and chemical parameters controlling the fusion of the liposomes will be discussed. Intermembrane bridging by duplex or triplex nucleic acids and light-induced activation of membrane-associated nucleic acid constituents provide the means for spatiotemporal fusion of liposomes or nucleic acid modified liposome fusion with native cell membranes. The membrane fusion processes lead to exchange of loads in the fused containments and are a means to integrate functional assemblies. This is exemplified with the operation of biocatalytic cascades and dynamic DNA polymerization/nicking or transcription machineries in fused protocell systems. Membrane fusion processes of protocell assemblies are found to have important drug-delivery, therapeutic, sensing, and biocatalytic applications. The future challenges and perspectives of DNA-guided fused containments and membranes are addressed.
Assuntos
Ácidos Nucleicos , Ácidos Nucleicos/química , Lipossomos/química , DNA/química , Fusão de Membrana , Membrana Celular/metabolismoRESUMO
Confinement can be used to systematically tame turbulent dynamics occurring in active fluids. Although periodic channels are the simplest geometries to study confinement numerically, the corresponding experimental realizations require closed racetracks. Here, we computationally study 2D active nematics confined to such a geometry-an annulus. By systematically varying the annulus inner radius and channel width, we bridge the behaviors observed in the previously studied asymptotic limits of the annulus geometry: a disk and an infinite channel. We identify new steady-state behaviors, which reveal the influence of boundary curvature and its interplay with confinement. We also show that, below a threshold inner radius, the dynamics are insensitive to the presence of the inner hole. We explain this insensitivity through a simple scaling analysis. Our work sheds further light on design principles for using confinement to control the dynamics of active nematics.
RESUMO
Liquid condensate droplets with distinct compositions of proteins and nucleic acids are widespread in biological cells. While it is known that such droplets, or compartments, can regulate irreversible protein aggregation, their effect on reversible self-assembly remains largely unexplored. In this article, we use kinetic theory and solution thermodynamics to investigate the effect of liquid-liquid phase separation on the reversible self-assembly of structures with well-defined sizes and architectures. We find that, when assembling subunits preferentially partition into liquid compartments, robustness against kinetic traps and maximum achievable assembly rates can be significantly increased. In particular, both the range of solution conditions leading to productive assembly and the corresponding assembly rates can increase by orders of magnitude. We analyze the rate equation predictions using simple scaling estimates to identify effects of liquid-liquid phase separation as a function of relevant control parameters. These results may elucidate self-assembly processes that underlie normal cellular functions or pathogenesis, and suggest strategies for designing efficient bottom-up assembly for nanomaterials applications.
Assuntos
Agregados ProteicosRESUMO
This review article introduces mechanistic aspects and applications of photochemically deprotected ortho-nitrobenzyl (ONB)-functionalized nucleic acids and their impact on diverse research fields including DNA nanotechnology and materials chemistry, biological chemistry, and systems chemistry. Specific topics addressed include the synthesis of the ONB-modified nucleic acids, the mechanisms involved in the photochemical deprotection of the ONB units, and the photophysical and chemical means to tune the irradiation wavelength required for the photodeprotection process. Principles to activate ONB-caged nanostructures, ONB-protected DNAzymes and aptamer frameworks are introduced. Specifically, the use of ONB-protected nucleic acids for the phototriggered spatiotemporal amplified sensing and imaging of intracellular mRNAs at the single-cell level are addressed, and control over transcription machineries, protein translation and spatiotemporal silencing of gene expression by ONB-deprotected nucleic acids are demonstrated. In addition, photodeprotection of ONB-modified nucleic acids finds important applications in controlling material properties and functions. These are introduced by the phototriggered fusion of ONB nucleic acid functionalized liposomes as models for cell-cell fusion, the light-stimulated fusion of ONB nucleic acid functionalized drug-loaded liposomes with cells for therapeutic applications, and the photolithographic patterning of ONB nucleic acid-modified interfaces. Particularly, the photolithographic control of the stiffness of membrane-like interfaces for the guided patterned growth of cells is realized. Moreover, ONB-functionalized microcapsules act as light-responsive carriers for the controlled release of drugs, and ONB-modified DNA origami frameworks act as mechanical devices or stimuli-responsive containments for the operation of DNA machineries such as the CRISPR-Cas9 system. The future challenges and potential applications of photoprotected DNA structures are discussed.
Assuntos
Lipossomos , Nanoestruturas , DNA/química , Nanoestruturas/química , Nanotecnologia/métodos , OligonucleotídeosRESUMO
For a virus-like particle (VLP) to serve as a delivery platform, the VLP must be able to release its cargo in response to a trigger. Here, we use a chemical biology approach to destabilize a self-assembling capsid for a subsequent triggered disassembly. We redesigned the dimeric hepatitis B virus (HBV) capsid protein (Cp) with two differentially addressable cysteines, C150 for reversibly crosslinking the capsid and C124 to react with a destabilizing moiety. The resulting construct, Cp150-V124C, assembles into icosahedral, 120-dimer VLPs that spontaneously crosslink via the C-terminal C150, leaving C124 buried at a dimer-dimer interface. The VLP is driven into a metastable state when C124 is reacted with the bulky fluorophore, maleimidyl BoDIPY-FL. The resulting VLP is stable until exposed to modest, physiologically relevant concentrations of reducing agent. We observe dissociation with FRET relaxation of polarization, size exclusion chromatography, and resistive-pulse sensing. Dissociation is slow, minutes to hours, with a characteristic lag phase. Mathematical modeling based on the presence of a nucleation step predicts disassembly dynamics that are consistent with experimental observations. VLPs transfected into hepatoma cells show similar dissociation behavior. These results suggest a generalizable strategy for designing a VLP that can release its contents in an environmentally responsive reaction.
Assuntos
Capsídeo , Vacinas de Partículas Semelhantes a Vírus , Capsídeo/química , Proteínas do Capsídeo/química , Vírus da Hepatite B/química , Linhagem Celular , Vacinas de Partículas Semelhantes a Vírus/análiseRESUMO
PURPOSE: There are no agreed upon measures to comprehensively determine the quality of radiation oncology (RO) care delivered for prostate cancer. Consequently, it is difficult to assess the implementation of scientific advances and adherence to best practices in routine clinical practice. To address this need, the US Department of Veterans Affairs (VA) National Radiation Oncology Program established the VA Radiation Oncology Quality Surveillance (VA ROQS) Program to develop clinical quality measures to assess the quality of RO care delivered to Veterans with cancer. This article reports the prostate cancer consensus measures. METHODS AND MATERIALS: The VA ROQS Program contracted with the American Society for Radiation Oncology to commission a Blue Ribbon Panel of prostate cancer experts to develop a set of evidence-based measures and performance expectations. From February to June 2021, the panel developed quality, aspirational, and surveillance measures for (1) initial consultation and workup, (2) simulation, treatment planning, and delivery, and (3) follow-up. Dose-volume histogram (DVH) constraints to be used as quality measures for definitive and post-prostatectomy radiation therapy were selected. The panel also identified the optimal Common Terminology Criteria for Adverse Events, version 5.0 (CTCAE V5.0), toxicity terms to assess in follow-up. RESULTS: Eighteen prostate-specific measures were developed (13 quality, 2 aspirational, and 3 surveillance). DVH metrics tailored to conventional, moderately hypofractionated, and ultrahypofractionated regimens were identified. Decision trees to determine performance for each measure were developed. Eighteen CTCAE V5.0 terms were selected in the sexual, urinary, and gastrointestinal domains as highest priority for assessment during follow-up. CONCLUSIONS: This set of measures and DVH constraints serves as a tool for assessing the comprehensive quality of RO care for prostate cancer. These measures will be used for ongoing quality surveillance and improvement among veterans receiving care across VA and community sites. These measures can also be applied to clinical settings outside of those serving veterans.
Assuntos
Neoplasias da Próstata , Radioterapia (Especialidade) , Veteranos , Masculino , Humanos , Estados Unidos , Indicadores de Qualidade em Assistência à Saúde , Consenso , Neoplasias da Próstata/radioterapiaRESUMO
PURPOSE: Using evidence-based radiation therapy to direct care for patients with breast cancer is critical to standardize practice, improve safety, and optimize outcomes. To address this need, the Veterans Affairs (VA) National Radiation Oncology Program (NROP) established the VA Radiation Oncology Quality Surveillance Program to develop clinical quality measures (QMs). The VA NROP contracted with the American Society for Radiation Oncology to commission 5 Blue Ribbon Panels for breast, lung, prostate, rectal, and head and neck cancers. METHODS AND MATERIALS: The Breast Cancer Blue Ribbon Panel experts worked collaboratively with the NROP to develop consensus QMs for use throughout the VA system, establishing a set of QMs for patients in several areas, including consultation and work-up; simulation, treatment planning, and treatment; and follow-up care. As part of this initiative, consensus dose-volume histogram (DVH) constraints were outlined. RESULTS: In total, 36 QMs were established. Herein, we review the process used to develop QMs and final consensus QMs pertaining to all aspects of radiation patient care, as well as DVH constraints. CONCLUSIONS: The QMs and expert consensus DVH constraints are intended for ongoing quality surveillance within the VA system and centers providing community care for Veterans. They are also available for use by greater non-VA community measures of quality care for patients with breast cancer receiving radiation.
Assuntos
Neoplasias da Mama , Radioterapia (Especialidade) , Veteranos , Masculino , Humanos , Estados Unidos , Neoplasias da Mama/radioterapia , Indicadores de Qualidade em Assistência à Saúde , Radioterapia (Especialidade)/métodos , ConsensoRESUMO
The promise of self-assembly to enable the bottom-up formation of materials with prescribed architectures and functions has driven intensive efforts to uncover rational design principles for maximizing the yield of a target structure. Yet, despite many successful examples of self-assembly, ensuring kinetic accessibility of the target structure remains an unsolved problem in many systems. In particular, long-lived kinetic traps can result in assembly times that vastly exceed experimentally accessible timescales. One proposed solution is to design non-equilibrium assembly protocols in which system parameters change over time to avoid such kinetic traps. Here, we develop a framework to combine Markov state model (MSM) analysis with optimal control theory to compute a time-dependent protocol that maximizes the yield of the target structure at a finite time. We present an adjoint-based gradient descent method that, in conjunction with MSMs for a system as a function of its control parameters, enables efficiently optimizing the assembly protocol. We also describe an interpolation approach to significantly reduce the number of simulations required to construct the MSMs. We demonstrate our approach with two examples; a simple semi-analytic model for the folding of a polymer of colloidal particles, and a more complex model for capsid assembly. Our results show that optimizing time-dependent protocols can achieve significant improvements in the yields of selected structures, including equilibrium free energy minima, long-lived metastable structures, and transient states.
Assuntos
Proteínas do Capsídeo , Capsídeo , Capsídeo/química , Polímeros/análiseRESUMO
Importance: Bladder-preserving trimodality therapy can be an effective alternative to radical cystectomy for treatment of muscle-invasive bladder cancer (MIBC), but biomarkers are needed to guide optimal patient selection. The DNA repair protein MRE11 is a candidate response biomarker that has not been validated in prospective cohorts using standardized measurement approaches. Objective: To evaluate MRE11 expression as a prognostic biomarker in MIBC patients receiving trimodality therapy using automated quantitative image analysis. Design, Setting, and Participants: This prognostic study analyzed patients with MIBC pooled from 6 prospective phase I/II, II, or III trials of trimodality therapy (Radiation Therapy Oncology Group [RTOG] 8802, 8903, 9506, 9706, 9906, and 0233) across 37 participating institutions in North America from 1988 to 2007. Eligible patients had nonmetastatic MIBC and were enrolled in 1 of the 6 trimodality therapy clinical trials. Analyses were completed August 2020. Exposures: Trimodality therapy with transurethral bladder tumor resection and cisplatin-based chemoradiation therapy. Main Outcomes and Measures: MRE11 expression and association with disease-specific (bladder cancer) mortality (DSM), defined as death from bladder cancer. Pretreatment tumor tissues were processed for immunofluorescence with anti-MRE11 antibody and analyzed using automated quantitative image analysis to calculate a normalized score for MRE11 based on nuclear-to-cytoplasmic (NC) signal ratio. Results: Of 465 patients from 6 trials, 168 patients had available tissue, of which 135 were analyzable for MRE11 expression (median age of 65 years [minimum-maximum, 34-90 years]; 111 [82.2%] men). Median (minimum-maximum) follow-up for alive patients was 5.0 (0.6-11.7) years. Median (Q1-Q3) MRE11 NC signal ratio was 2.41 (1.49-3.34). Patients with an MRE11 NC ratio above 1.49 (ie, above first quartile) had a significantly lower DSM (HR, 0.50; 95% CI, 0.26-0.93; P = .03). The 4-year DSM was 41.0% (95% CI, 23.2%-58.0%) for patients with an MRE11 NC signal ratio of 1.49 or lower vs 21.0% (95% CI, 13.4%-29.8%) for a ratio above 1.49. MRE11 NC signal ratio was not significantly associated with overall survival (HR, 0.84; 95% CI, 0.49-1.44). Conclusions and Relevance: Higher MRE11 NC signal ratios were associated with better DSM after trimodality therapy. Lower MRE11 NC signal ratios identified a poor prognosis subgroup that may benefit from intensification of therapy.
Assuntos
Neoplasias da Bexiga Urinária , Masculino , Adulto , Humanos , Idoso , Feminino , Neoplasias da Bexiga Urinária/tratamento farmacológico , Estudos Prospectivos , Invasividade Neoplásica , Resultado do Tratamento , Biomarcadores , Músculos/patologiaRESUMO
A method to computationally and experimentally identify aptamers against short peptides or amino acid clusters is introduced. The method involves the selection of a well-defined protein aptamer complex and the extraction of the peptide sequence participating in the binding of the protein to the aptamer. The subsequent fragmentation of the peptide sequence into short peptides and the in silico docking-guided identification of affinity complexes between the miniaturized peptides and the antiprotein aptamer, followed by experimental validation of the binding features of the short peptides with the antiprotein aptamers, leads to the identification of new short peptide-aptamer complexes. This is exemplified with the identification of the pentapeptide RYERN as the scaffold that binds thrombin to the DNA thrombin aptamer (DNA TA). In silico docking studies followed by microscale thermophoresis (MST) experiments demonstrate that the miniaturized tripeptides RYE, YER, and ERN reveal selective binding affinities toward the DNA TA. In addition, docking and MST experiments show that the ribonucleotide-translated RNA TA shows related binding affinities of YER to the DNA TA. Most importantly, we demonstrate that the separated amino acids Y/E/R assemble as a three amino acid cluster on the DNA TA and RNA TA aptamers in spatial configurations similar to the tripeptide YER on the respective aptamers. The clustering phenomenon is selective for the YER tripeptide system. The method to identify binding affinities of miniaturized peptides to known antiprotein aptamers and the specific clustering of single amino acids on the aptamers is further demonstrated by in silico and experimental identification of the binding of the tripeptide RET and the selective clustering of the separated amino acids R/E/T onto a derivative of the AS1411 aptamer against the nucleolin receptor protein.
Assuntos
Aminoácidos , Aptâmeros de Nucleotídeos , Aptâmeros de Nucleotídeos/química , Trombina/metabolismo , DNA/química , RNA , PeptídeosRESUMO
Self-assembly is one of the most promising strategies for making functional materials at the nanoscale, yet new design principles for making self-limiting architectures, rather than spatially unlimited periodic lattice structures, are needed. To address this challenge, we explore the tradeoffs between addressable assembly and self-closing assembly of a specific class of self-limiting structures: cylindrical tubules. We make triangular subunits using DNA origami that have specific, valence-limited interactions and designed binding angles, and we study their assembly into tubules that have a self-limited width that is much larger than the size of an individual subunit. In the simplest case, the tubules are assembled from a single component by geometrically programming the dihedral angles between neighboring subunits. We show that the tubules can reach many micrometers in length and that their average width can be prescribed through the dihedral angles. We find that there is a distribution in the width and the chirality of the tubules, which we rationalize by developing a model that considers the finite bending rigidity of the assembled structure as well as the mechanism of self-closure. Finally, we demonstrate that the distributions of tubules can be further sculpted by increasing the number of subunit species, thereby increasing the assembly complexity, and demonstrate that using two subunit species successfully reduces the number of available end states by half. These results help to shed light on the roles of assembly complexity and geometry in self-limited assembly and could be extended to other self-limiting architectures, such as shells, toroids, or triply periodic frameworks.