RESUMO
Absorption of photons in atomically thin materials has become a challenge in the realization of ultrathin, high-performance optoelectronics. While numerous schemes have been used to enhance absorption in 2D semiconductors, such enhanced device performance in scalable monolayer photodetectors remains unattained. Here, we demonstrate wafer-scale integration of monolayer single-crystal MoS2 photodetectors with a nitride-based resonant plasmonic metasurface to achieve a high detectivity of 2.58 × 1012 Jones with a record-low dark current of 8 pA and long-term stability over 40 days. Upon comparison with control devices, we observe an overall enhancement factor of >100; this can be attributed to the local strong EM field enhanced photogating effect by the resonant plasmonic metasurface. Considering the compatibility of 2D semiconductors and hafnium nitride with the Si CMOS process and their scalability across wafer sizes, our results facilitate the smooth incorporation of 2D semiconductor-based photodetectors into the fields of imaging, sensing, and optical communication applications.
RESUMO
INTRODUCTION: COVID-19 pandemic adversely affected healthcare workers (HCWs). Here, we evaluate the occurence of long-COVID-19 symtoms among HCWs. METHODS: This is a questionnaire-based study of HCWs who had COVID-19 in two medical centers in Saudi Arabia and were mostly vaccinated. RESULTS: The study included 243 HCWs with a mean age (+ SD) of 36.1 (+ 7.6) years. Of them, 223 (91.8%) had three doses of COVID-19 vaccine, 12 (4.9%) had four doses, and 5 (2.1%) had two doses. The most common symptoms at the start of the illness were cough (180, 74.1%), shortness of breath (124, 51%), muscle ache (117, 48.1%), headache (113, 46.5%), sore throat (111, 45.7%), diarrhea (109, 44.9%) and loss of taste (108, 44.4%). Symptoms lasted for< one week in 117 (48.1%),> one week and< 1 month in 89 (36.6%),> 2 months and< 3 months in 9 (3.7%), and> 3 months in 15 (6.2%). The main symptoms present> 3 months were hair loss (8, 3.3%), cough (5, 2.1%), and diarrhea (5, 2.1%). A binomial regression analysis showed no relationship between persistence of symptoms for> 3 months and other demographic or clinical symptoms characteristics. CONCLUSION: The study showed a low rate of the occurence of long-COVID> 3 months during the Omicron-wave among mostly vaccinated HCWs with no significant comorbidities. Furhter studies are needed to examine the effect of different vaccines on long-COVID-19 among HCWs.
Assuntos
COVID-19 , Humanos , Adulto , Autorrelato , COVID-19/prevenção & controle , Vacinas contra COVID-19 , Tosse , Pandemias , Síndrome de COVID-19 Pós-Aguda , Diarreia , Pessoal de SaúdeRESUMO
Growing continuous monolayer films of transition-metal dichalcogenides (TMDs) without the disruption of grain boundaries is essential to realize the full potential of these materials for future electronics and optoelectronics, but it remains a formidable challenge. It is generally believed that controlling the TMDs orientations on epitaxial substrates stems from matching the atomic registry, symmetry, and penetrable van der Waals forces. Interfacial reconstruction within the exceedingly narrow substrate-epilayer gap has been anticipated. However, its role in the growth mechanism has not been intensively investigated. Here, we report the experimental conformation of an interfacial reconstructed (IR) layer within the substrate-epilayer gap. Such an IR layer profoundly impacts the orientations of nucleating TMDs domains and, thus, affects the materials' properties. These findings provide deeper insights into the buried interface that could have profound implications for the development of TMD-based electronics and optoelectronics.
RESUMO
Three-dimensional monolithic integration of memory devices with logic transistors is a frontier challenge in computer hardware. This integration is essential for augmenting computational power concurrent with enhanced energy efficiency in big data applications such as artificial intelligence. Despite decades of efforts, there remains an urgent need for reliable, compact, fast, energy-efficient and scalable memory devices. Ferroelectric field-effect transistors (FE-FETs) are a promising candidate, but requisite scalability and performance in a back-end-of-line process have proven challenging. Here we present back-end-of-line-compatible FE-FETs using two-dimensional MoS2 channels and AlScN ferroelectric materials, all grown via wafer-scalable processes. A large array of FE-FETs with memory windows larger than 7.8 V, ON/OFF ratios greater than 107 and ON-current density greater than 250 µA um-1, all at ~80 nm channel length are demonstrated. The FE-FETs show stable retention up to 10 years by extension, and endurance greater than 104 cycles in addition to 4-bit pulse-programmable memory features, thereby opening a path towards the three-dimensional heterointegration of a two-dimensional semiconductor memory with silicon complementary metal-oxide-semiconductor logic.
RESUMO
Thin-film electronics pliably laminated onto the epidermis for noninvasive, specific, and multifunctional sensing are ideal wearable systems for health monitoring and information technologies. However, it remains a critical challenge to fabricate ultrathin and compliant skin-like sensors with high imperceptibility and sensitivities. Here we report a design of conductive hydrogen-substituted graphdiyne (HsGDY) nanofilms with conjugated porous structure and inherent softness for on-skin sensors that allow minimization of stress and discomfort with wear. Dominated by the subtle deformation-induced changes in the interdomain tunneling conductance, the engineered HsGDY sensors show continuous and accurate results. Real-time noninvasive spatial mapping of dynamic/static strains in both tensile/compressive directions monitors various body motions with high sensitivity (GF â¼22.6, under 2% strain), fast response (â¼60 ms), and long-term durability (â¼5000 cycles). Moreover, such devices can dynamically distinguish between the temperature difference and frequency of air inhaled and exhaled through the nostril, revealing a quantitative assessment of the movement/health of the human body. The proof-of-concept strategy provides an alternative route for the design of next-generation wearable organic bioelectronics with multiple electronic functionalities.
Assuntos
Grafite , Dispositivos Eletrônicos Vestíveis , Humanos , Grafite/química , Condutividade Elétrica , HidrogênioRESUMO
Electronic charge rearrangement between components of a heterostructure is the fundamental principle to reach the electronic ground state. It is acknowledged that the density of state distribution of the components governs the amount of charge transfer, but a notable dependence on temperature is not yet considered, particularly for weakly interacting systems. Here, it is experimentally observed that the amount of ground-state charge transfer in a van der Waals heterostructure formed by monolayer MoS2 sandwiched between graphite and a molecular electron acceptor layer increases by a factor of 3 when going from 7 K to room temperature. State-of-the-art electronic structure calculations of the full heterostructure that accounts for nuclear thermal fluctuations reveal intracomponent electron-phonon coupling and intercomponent electronic coupling as the key factors determining the amount of charge transfer. This conclusion is rationalized by a model applicable to multicomponent van der Waals heterostructures.
RESUMO
In the last decade, catalytic chemical vapor deposition (CVD) has been intensively explored for the growth of single-layer graphene (SLG). Despite the scattering of guidelines and procedures, variables such as the surface texture/chemistry of catalyst metal foils, carbon feedstock, and growth process parameters have been well-scrutinized. Still, questions remain on how best to standardize the growth procedure. The possible correlation of procedures between different CVD setups is an example. Here, two thermal CVD reactors were explored to grow graphene on Cu foil. The design of these setups was entirely distinct, one being a "showerhead" cold-wall type, whereas the other represented the popular "tubular" hot-wall type. Upon standardizing the Cu foil surface, it was possible to develop a procedure for cm2 -scale SLG growth that differed only by the carrier gas flow rate used in the two reactors.
RESUMO
Two-dimensional transition metal dichalcogenide nanoribbons are touted as the future extreme device downscaling for advanced logic and memory devices but remain a formidable synthetic challenge. Here, we demonstrate a ledge-directed epitaxy (LDE) of dense arrays of continuous, self-aligned, monolayer and single-crystalline MoS2 nanoribbons on ß-gallium (III) oxide (ß-Ga2O3) (100) substrates. LDE MoS2 nanoribbons have spatial uniformity over a long range and transport characteristics on par with those seen in exfoliated benchmarks. Prototype MoS2-nanoribbon-based field-effect transistors exhibit high on/off ratios of 108 and an averaged room temperature electron mobility of 65 cm2 V-1 s-1. The MoS2 nanoribbons can be readily transferred to arbitrary substrates while the underlying ß-Ga2O3 can be reused after mechanical exfoliation. We further demonstrate LDE as a versatile epitaxy platform for the growth of p-type WSe2 nanoribbons and lateral heterostructures made of p-WSe2 and n-MoS2 nanoribbons for futuristic electronics applications.