Physical modification of starch by heat-moisture treatment and annealing and their applications: A review.

Heat-moisture treatment (HMT) and annealing are hydrothermal starch modifications. HMT is performed using high temperature and low moisture content range, whereas annealing uses excess of water, a long period of time, and temperature above the glass transition and below the gelatinization temperature. This review focuses on: research advances; the effect of HMT and annealing on starch structure and most important properties; combined modifications; and HMT-starch and annealed-starch applications. Annealing and HMT can be performed together or combined with other modifications. These combinations contribute to new applications in different areas. The annealed and HMT-starches can be used for pasta, candy, bakery products, films, nanocrystals, and nanoparticles. HMT has been studied on starch digestibility and promising data have been reported, due to increased content of slowly digestible and resistant starches. The starch industry is in constant expansion, and modification processes increase its versatility, adapting it for different purposes in food industries.

Influência da luminosidade na firmeza e perda de massa de pinhões / Influence of luminosity on firmness and loss of mass of pinhões

As sementes de Araucaria angustifolia, conhecidas como pinhão, tem sua conservação pós-colheita dificultada. A germinação do pinhão representa uma desvantagem, já que sementes brotadas não tem valor comercial. A inibição da germinação pela luz induz a semente ao seu estado de dormência, com redução da atividade metabólica, sendo uma alternativa para a conservação da semente. Com isso, objetivou-se neste estudo avaliar a perda de massa e firmeza de pinhões armazenados sob diferentes condições de luminosidade a temperatura ambiente por 90 dias. O armazenamento de pinhões em diferentes condições de luminosidade a temperatura ambiente ocasionou perda de massa e firmeza, sendo que a luminosidade não proporcionou aumento da conservação de pinhões.

Action of ginger essential oil (Zingiber officinale) encapsulated in proteins ultrafine fibers on the antimicrobial control in situ.

The ultrafine fibers were produced using a polymeric blend of soy protein isolate (SPI), polyethylene oxide (PEO), and zein at a ratio of 1:1:1 (v/v/v) by electrospinning. The ginger essential oil (GEO) was encapsulated in the ultrafine fibers and the morphology, Fourier-Transform Infrared Spectroscopy (FTIR) analysis, thermal properties and relative crystallinity were evaluated. The antimicrobial activity of ginger essential oil was evaluated against five bacteria (Listeria monocytogenes, Staphylococcus aureus, Escherichia coli 0157:H7, Salmonella typhimurium, and Pseudomonas aeruginosa). Based on the preliminary tests, the concentration of GEO selected to add in the polymer solution was 12% (v/v; GEO/polymer solution). The fiber produced with 12% (v/v) GEO was used for antimicrobial analysis and in situ application (in fresh Minas cheese) against L. monocytogenes by micro-atmosphere. The ultrafine fibers produced, regardless the concentration of the essential oil, presented homogeneous morphology with cylindrical shape without the presence of beads. The application of the active fibers containing 12% GEO showed high potential to be applied in food packaging to reduce microbial contamination.

Bacteriocin-like substances of Lactobacillus curvatus P99: characterization and application in biodegradable films for control of Listeria monocytogenes in cheese.

The aim of this study was to evaluate the effectiveness of a biodegradable film, with antimicrobial metabolites produced by Lactobacillus curvatus P99 incorporated, targeting the control of Listeria monocytogenes in sliced "Prato" cheese. Tests were performed to evaluate the spectrum of action of cell-free supernatant (CFS) of P99 against different microorganisms, as well as to detect the minimum inhibitory (MIC) and bactericidal (MBC) concentrations against L. monocytogenes Scott A. The detection of genes that encode for the production of bacteriocins and evaluation of their expression were performed. Antimicrobial films were prepared, followed by in vitro and in situ analysis. The MIC and MBC of CFS against L. monocytogenes Scott A was 15.6 µL/mL and 62.5 µL/mL, respectively. Lactobacillus curvatus P99 presented two genes coding for the bacteriocins, which were expressed. Films with added MBC showed activity against different indicator microorganisms and were able to control L. monocytogenes Scott A when used in sliced "Prato" cheese.

Cellulose fibers extracted from rice and oat husks and their application in hydrogel.

The commercial cellulose fibers and cellulose fibers extracted from rice and oat husks were analyzed by chemical composition, morphology, functional groups, crystallinity and thermal properties. The cellulose fibers from rice and oat husks were used to produce hydrogels with poly (vinyl alcohol). The fibers presented different structural, crystallinity, and thermal properties, depending on the cellulose source. The hydrogel from rice cellulose fibers had a network structure with a similar agglomeration sponge, with more homogeneous pores compared to the hydrogel from oat cellulose fibers. The hydrogels prepared from the cellulose extracted from rice and oat husks showed water absorption capacity of 141.6-392.1% and high opacity. The highest water absorption capacity and maximum stress the compression were presented by rice cellulose hydrogel at 25°C. These results show that the use of agro-industrial residues is promising for the biomaterial field, especially in the preparation of hydrogels.

Films based on protein isolated from croaker (Micropogonias furnieri) and palm oil.

BACKGROUND: The microstructure and the physical, mechanical, barrier and thermal properties of films based on different concentrations of protein isolated from croaker waste (CPI) and palm oil (PO) were analyzed. Films were elaborated by a casting technique using 2, 3 and 4 g CPI 100 g(-1) of a filmogenic solution and 0, 10 and 20 g of PO 100 g(-1) CPI. RESULT: Microstructure of the film surfaces of CPI with PO showed no presence of lipid droplets dispersed in the filmogenic matrix, although a rough surface was present. Films with 3% and 4% CPI and 20% PO had the lowest rates of water vapor permeability. When there was an addition of PO to the reduced tensile strength of the films, regardless of the concentration of CPI, this addition reduced the elongation of films with 3% and 4% CPI; however, it did not influence films with 2% CPI, which did not differ from the control film (0% OP). Thermal analysis revealed that films with the highest PO percentage had a lower initial weight loss when compared with other films, due to higher hydrophobicity. CONCLUSION: The use of protein isolate obtained from fish residues of low commercial value and palm oil is viable for the production of biodegradable films because the latter constitute good barrier properties and thermal stability. © 2015 Society of Chemical Industry.