Engineering of Methionine Adenosyltransferase Reveals Key Roles of Electrostatic Interactions in Enhanced Catalytic Activity.

As an important dietary supplement, S-adenosylmethionine (SAM) is currently synthesized by methionine adenosyltransferase (MAT) using ATP and methionine as substrates. However, the activity of MAT is severely inhibited by product inhibition, which limits the industrial production of SAM. Here, MAT from Bacteroides fragilis (BfMAT), exhibiting relatively low product inhibition and moderate specific activity, was identified by gene mining. Based on molecular docking, residues within 5 Å of ATP in BfMAT were subjected to mutagenesis for enhanced catalytic activity. Triple variants M3-1 (E42M/E55L/K290I), M3-2 (E42R/E55L/K290I), and M3-3 (E42C/E55L/K290I) with specific activities of 1.83, 1.81, and 1.94 U/mg were obtained, which were 110.5-125.6% higher than that of the wild type (WT). Furthermore, compared with WT, the Km values of M3-1 and M3-3 were decreased by 31.4% and 60.6%, leading to significant improvement in catalytic efficiency (kcat/Km) by 322.5% and 681.1%. All triple variants showed shifted optimal pH from 8.0 to 7.5. Moreover, interaction analysis suggests that the enhanced catalytic efficiency may be attributed to the decreased electrostatic interactions between ATP and the mutation sites (E42, E55, and K290). Based on MD simulation, coulomb energy and binding free energy analysis further reveal the importance of electrostatic interactions for catalytic activity of BfMAT, which could be an efficient strategy for improving catalytic performance of MATs.

[Commentary: polymer binding modules accelerate enzymatic degradation of poly(ethylene terephthalate)].

The large scale production and indiscriminate use of plastics led to serious environmental pollution. To reduce the negative effects of plastics waste on the environment, an approach of enzymatic degradation was put forward to catalyze plastics degradation. Protein engineering strategies have been applied to improve the plastics degrading enzyme properties such as activity and thermal stability. In addition, polymer binding modules were found to accelerate the enzymatic degradation of plastics. In this article, we introduced a recent work published in Chem Catalysis, which studied the role of binding modules in enzymatic hydrolysis of poly(ethylene terephthalate) (PET) at high-solids loadings. Graham et al. found that binding modules accelerated PET enzymatic degradation at low PET loading (< 10 wt%) and the enhanced degradation cannot be observed at high PET loading (10 wt%-20 wt%). This work is beneficial for the industrial application of polymer binding modules in plastics degradation.

Efficient production of hyaluronic acid by Streptococcus zooepidemicus using two-stage semi-continuous fermentation.

Hyaluronic acid is a kind of mucopolysaccharide that has wide applications in cosmetics, health food, and orthopedics. Using Streptococcus zooepidemicus ATCC 39920 as parent, a beneficial mutant SZ07 was obtained by UV mutagenesis, giving 1.42 g/L hyaluronic acid in shake flasks. To enhance the efficiency of hyaluronic acid production, a semi-continuous fermentation process consisted of two-stage 3-L bioreactors was developed, in which 1.01 g/L/h productivity and 14.60 g/L hyaluronic acid were obtained. To further enhance the titer of hyaluronic acid, recombinant hyaluronidase SzHYal was added into 2nd stage bioreactor at 6 h to reduce the viscosity of broth. The highest hyaluronic acid titer of 29.38 g/L was achieved with a productivity of 1.13 g/L/h at 300 U/L SzHYal after 24 h. This newly developed semi-continuous fermentation process provides a promising strategy for the industrial production of hyaluronic acid and related polysaccharides.

Self-Sufficient In Vitro Multi-Enzyme Cascade for Efficient Synthesis of Danshensu from l-DOPA.

Danshensu (DSS), a traditional Chinese medicine, is widely used for the treatment of cardiovascular and cancer diseases. Here, a one-pot multi-enzyme cascade pathway was designed for DSS synthesis from l-DOPA using tyrosine aminotransferase from Escherichia coli (EcTyrB) and d-isomer-specific 2-hydroxyacid dehydrogenase from Lactobacillus frumenti (LfD2-HDH). Glutamate dehydrogenase from Clostridium difficile (CdgluD) was also introduced for a self-sufficient system of α-ketoglutaric acid and NADH. Under optimal conditions (35 °C, pH 7.0, EcTyrB:LfD2-HDH:CdgluD = 3:2:1, glutamate:NAD+ = 1:1), 98.3% yield (at 20 mM l-DOPA) and space-time yield of 6.61 g L-1 h-1 (at 40 mM l-DOPA) were achieved. Decreased yields of DSS at elevated l-DOPA concentrations (100 mM) could be attributed to an inhibited CdgluD activity caused by NH4+ accumulation. This developed multi-enzyme cascade pathway (including EcTyrB, LfD2-HDH, and CdgluD) provides an efficient and sustainable approach for the production of DSS from l-DOPA.

[Engineering the 182 site of cyclodextrin glucosyltransferase for glycosylated genistein synthesis].

Genistein and its monoglucoside derivatives play important roles in food and pharmaceuticals fields, whereas their applications are limited by the low water solubility. Glycosylation is regarded as one of the effective approaches to improve water solubility. In this paper, the glycosylation of sophoricoside (genistein monoglucoside) was investigated using a cyclodextrin glucosyltransferase from Penibacillus macerans (PmCGTase). Saturation mutagenesis of D182 from PmCGTase was carried out. Compared with the wild-type (WT), the variant D182C showed a 13.42% higher conversion ratio. Moreover, the main products sophoricoside monoglucoside, sophoricoside diglucoside, and sophoricoside triglucoside of the variant D182C increased by 39.35%, 56.05% and 64.81% compared with that of the WT, respectively. Enzymatic characterization showed that the enzyme activities (cyclization, hydrolysis, disproportionation) of the variant D182C were higher than that of the WT, and the optimal pH and temperature of the variant D182C were 6 and 40℃, respectively. Kinetics analysis showed the variant D182C has a lower Km value and a higher kcat/Km value than that of the WT, indicating the variant D182C has enhanced affinity to substrate. Structure modeling and docking analysis demonstrated that the improved glycosylation efficiency of the variant D182C may be attributed to the increased interactions between residues and substrate.

Sustainable one-pot chemo-enzymatic synthesis of chiral furan amino acid from biomass via magnetic solid acid and threonine aldolase.

Sustainable synthesis of valuable noncanonical amino acids from renewable feedstocks is of great importance. Here, a feasible chemo-enzymatic procedure was developed for the synthesis of chiral ß-(2-furyl)serine from biomass catalyzed by a solid acid catalyst and immobilized E. coli whole-cell harboring l-threonine aldolase. A novel magnetic solid acid catalyst Fe3O4@MCM-41/SO42- was successfully synthesized for conversion of corncob into furfural in an aqueous system. Under the optimum conditions, furfural yield of 63.6% was achieved in 40 min at 180 ℃ with 2.0% catalyst (w/w). Furthermore, biomass-derived furfural was converted into an aldol-addition product ß-(2-furyl)serine with 73.6% yield, 99% ee and 20% de by immobilized cells in 6 h. The magnetic solid acid and biocatalyst can be readily recovered and efficiently reused for five consecutive cycles without significant loss on product yields. This chemo-enzymatic route can be attractive for producing noncanonical amino acids from biomass.

Enhancing n-Butanol Tolerance of Escherichia coli by Overexpressing of Stress-Responsive Molecular Chaperones.

Microbial tolerance to organic solvents is critical for efficient production of biofuels. In this study, n-butanol tolerance of Escherichia coli JM109 was improved by overexpressing of genes encoding stress-responsive small RNA-regulator, RNA chaperone, and molecular chaperone. Gene rpoS, coding for sigma S subunit of RNA polymerase, was the most efficient in improving n-butanol tolerance of E. coli. The highest OD600 and the specific growth rate of JM109/pQE80L-rpoS reached 1.692 and 0.144 h-1 respectively at 1.0% (v/v) n-butanol. Double and triple expression of molecular chaperones rpoS, secB, and groS were conducted and optimized. Recombinant strains JM109/pQE80L-secB-rpoS and JM109/pQE80L-groS-secB-rpoS exhibited the highest n-butanol tolerance, with specific growth rates of 0.164 and 0.165 h-1, respectively. Membrane integrity, potentials, and cell morphology analyses demonstrated the high viability of JM109/pQE80L-groS-secB-rpoS. This study provides guidance on employing various molecular chaperones for enhancing the tolerance of E. coli against n-butanol.

High-Throughput Screening Method for Directed Evolution and Characterization of Aldol Activity of D-Threonine Aldolase.

A rapid and reliable method for the determination of aldol condensation activity of threonine aldolases (TAs) toward aldehydes and glycine was developed. This 2,4-dinitrophenylhydrazine (DNPH) method has high sensitivity and low background disturbance and can be spectrophotometrically measured for high-throughput screening and characterization of TAs. For 4-methylsulfonyl benzaldehyde (MSB), the maximum absorbance peak was observed at around 485 nm. Site-directed saturation mutagenesis libraries of D-threonine aldolase from Alcaligenes xylosoxidans CGMCC 1.4257 (AxDTA) was constructed and screened with this DNPH method for increased aldol activity toward MSB. Two beneficial variants AxDTAD321C and AxDTAN101G were identified. Substrate specificity of AxDTA and variants toward nineteen aldehydes with different substituents was facilely characterized employing this DNPH method. Furthermore, AxDTA variants displayed enhanced catalytic performance and selectivity in aldol reaction. Consequently, our study provides a rapid screening and characterization method for TAs with potential applications in preparation of chiral ß-hydroxy-α-amino acids.

[Engineering ω-transaminase by random mutagenesis and semi-rational design for the synthesis of (R)-(+)-1-(1-naphthyl)ethylamine].

(R)-(+)-1-(1-naphthyl)ethylamine is a key chiral intermediate for the synthesis of calcimimetic drug cinacalcet hydrochloride. ω-Transaminase has been considered to be potential for producing (R)-(+)-1-(1-naphthyl)ethylamine by asymmetric reduction of 1-acetonaphthone. Here, ω-transaminase from Arthrobacter sp. was engineered by combinatorial strategies of random mutagenesis and semi-rational design. Variants F225M, C281I, F225M/C281I with improved catalytic efficiency and thermostability were obtained. Compared with WT, variant F225M/C281I showed 85% increased kcat, 56% decreased Km and 3.42-fold kcat/Km. Furthermore, 22% higher conversion rate was achieved by F225M/C281I at 10 mmol/L 1-acetonaphthone after 24 h. Based on molecular docking and molecular dynamics simulation, improved catalytic efficiency of F225M/C281I could be attributed to its increased Pi-Pi T-shaped interaction with substrate 1-acetonaphthone. Additionally, a slightly higher half-life of F225M/C281I was validated by its lower root-mean-square fluctuation (RMSF) value of loop 134-139 compared with WT.

Engineering of Cyclodextrin Glycosyltransferase Reveals pH-Regulated Mechanism of Enhanced Long-Chain Glycosylated Sophoricoside Specificity.

Sophoricoside glycosylated derivatives, especially long-chain glycosylated sophoricosides (LCGS), have greatly improved water solubility compared with sophoricoside. Here, cyclodextrin glycosyltransferase from Paenibacillus macerans (PmCGTase) was employed for sophoricoside glycosylation. Saturation mutagenesis of alanine 156, alanine 166, glycine 173, and leucine 174 was performed due to their nonconservative properties among α-, ß-, and γ-CGTases with different product specificities. Variants L174P, A156V/L174P, and A156V/L174P/A166Y greatly improved the product specificity for LCGS. pH significantly affected the extent of glycosylation catalyzed by the variants. Further investigations revealed that the pH-regulated mechanism for LCGS synthesis mainly depends on a disproportionation route at a lower pH (pH 4) and a cyclization-coupling route at a higher pH (pH 8) and equivalent effects of cyclization-coupling and disproportionation routes at pH 5. Whereas short-chain glycosylated sophoricosides (SCGS) are primarily produced via disproportionation of maltodextrin at pH 4 and secondary disproportionation of LCGS at pH 8. At pH 5, SCGS synthesis mainly depends on a hydrolysis route by the wild type (WT) and a secondary disproportionation route by variant A156V/L174P/A166Y. Kinetics analysis showed a decreased Km value of variant A156V/L174P/A166Y. Dynamics simulation results demonstrated that the improved LCGS specificity of the variant is possibly attributed to the enhanced affinity to long-chain substrates, which may be caused by the changes of hydrogen bond interactions at the -5, -6, and -7 subsites. Our results reveal a pH-regulated mechanism for product specificity of CGTase and provide guidance for engineering CGTase toward products with different sugar chain lengths.IMPORTANCE The low water solubility of sophoricoside seriously limits its applications in the food and pharmaceutical industries. Long-chain glycosylated sophoricosides show greatly improved water solubility. Here, the product specificity of cyclodextrin glycosyltransferase (CGTase) for long-chain glycosylated sophoricosides was significantly affected by pH. Our results reveal the pH-regulated mechanism of the glycosylated product specificity of CGTase. This work adds to our understanding of the synthesis of long-chain glycosylated sophoricosides and provides guidance for exploring related product specificity of CGTase based on pH regulation.

Enhancing soluble expression of sucrose phosphorylase in Escherichia coli by molecular chaperones.

Sucrose phosphorylase (SPase, EC 2.4.1.7) has a wide range of application in food, cosmetics, and pharmaceutical industries because of its broad substrate specificity. However, low SPase yields produced by wild-type strains cannot meet industrial requirements due to their complex metabolic regulation mechanisms. In this study, spase gene from Thermoanaerobacterium thermosaccharolyticum was cloned and expressed in Escherichia coli BL21 (DE3), leading to 7.05 U/mL (3.71 U/mg) of T. thermosaccharolyticum SPase (TtSPase) under optimum conditions. Co-expression of molecular chaperone teams pGro7 (GroES-GroEL), pG-KJE8 (DnaK-DnaJ-GrpE and GroES-GroEL), and pG-TF2 (GroES-GroEL-Tig) significantly enhanced the TtSPase activities to 18.5 U/mg (59.2 U/mL), 9.52 U/mg (28.6 U/mL), and 25.7 U/mg (64.5 U/mL), respectively. Results suggested that GroES-GroEL chaperone combination could regulate protein folding processes and protect misfolded proteins from aggregation. The enzymatic characterization results showed that TtSPase had an optimal temperature of 60 °C and optimal pH of 6.5. In particular, it had high thermostability of T5030 = 67 °C and half-life (t1/2 at 70 °C) of 19 min. Furthermore, purified TtSPase was used for hydroquinone transglycosylation and 21% of molar production yield of α-arbutin was obtained. This study provides a TtSPase with high thermostability for potential industrial applications, and develops an effective strategy for improving soluble TtSPase production in E. coli.

CRISPR-Cpf1-Assisted Engineering of Corynebacterium glutamicum SNK118 for Enhanced L-Ornithine Production by NADP-Dependent Glyceraldehyde-3-Phosphate Dehydrogenase and NADH-Dependent Glutamate Dehydrogenase.

Here, Corynebacterium glutamicum SNK118 was metabolically engineered for L-ornithine production through CRISPR-Cpf1-based genome manipulation and plasmid-based heterologous overexpression. Genes argF, argR, and ncgl2228 were deleted to block the degradation of L-ornithine, eliminate the global transcriptional repression, and alleviate the competitive branch pathway, respectively. Overexpression of CsgapC (NADP-dependent glyceraldehyde 3-phosphate dehydrogenases gene from Clostridium saccharobutylicum DSM 13864) and BsrocG (NADH-dependent glutamate dehydrogenase gene from Bacillus subtilis HB-1) resulted markedly increased ornithine biosynthesis. Eventually, the engineered strain KBJ11 (SNK118ΔargRΔargFΔncgl2228/pXMJ19-CsgapC-BsrocG) was constructed for L-ornithine overproduction. In fed-batch fermentation, L-ornithine of 88.26 g/L with productivity of 1.23 g/L/h (over 72 h) and yield of 0.414 g/g glucose was achieved by strain KBJ11 in a 10-L bioreactor. Our result represents the highest titer and yield of L-ornithine production by microbial fermentation. This study suggests that heterologous expression of CsgapC and BsrocG could promote L-ornithine production by C. glutamicum strains.

Composite coal fly ash solid acid catalyst in synergy with chloride for biphasic preparation of furfural from corn stover hydrolysate.

A solid acid catalyst SO42-/SnO2-Al2O3-CFA was synthesized based on industrial waste coal fly ash (CFA) as carrier and applied in the conversion of oxalic acid pretreated corn stover hydrolysate to produce furfural. Physical properties of the solid acid catalyst were characterized by SEM, FTIR, XRD, BET, EDAX, and NH3-TPD. Highly wrinkled structure of SO42-/SnO2-Al2O3-CFA could provide more specific surface area for the covalent linkage between SiO2 and SnO2. Factors influencing the efficacy of SO42-/SnO2-Al2O3-CFA were systematically explored. The highest furfural yield of 84.7% was reached in NH4Cl-toluene biphasic system at 180 °C for 30 min. The recyclability of SO42-/SnO2-Al2O3-CFA and toluene could be achieved for five batches with stable performance in transformation of xylose-rich corn stover hydrolysate. This study provided a novel solid acid catalyst with promising potential in the synthesis of furfural from corn stover.

Enhancing butanol tolerance of Escherichia coli reveals hydrophobic interaction of multi-tasking chaperone SecB.

BACKGROUND: Escherichia coli has been proved to be one promising platform chassis for the production of various natural products, such as biofuels. Product toxicity is one of the main bottlenecks for achieving maximum production of biofuels. Host strain engineering is an effective approach to alleviate solvent toxicity issue in fermentation. RESULTS: Thirty chaperones were overexpressed in E. coli JM109, and SecB recombinant strain was identified with the highest n-butanol tolerance. The tolerance (T) of E. coli overexpressing SecB, calculated by growth difference in the presence and absence of solvents, was determined to be 9.13% at 1.2% (v/v) butanol, which was 3.2-fold of the control strain. Random mutagenesis of SecB was implemented and homologously overexpressed in E. coli, and mutant SecBT10A was identified from 2800 variants rendering E. coli the highest butanol tolerance. Saturation mutagenesis on T10 site revealed that hydrophobic residues were required for high butanol tolerance of E. coli. Compared with wild-type (WT) SecB, the T of SecBT10A strain was further increased from 9.14 to 14.4% at 1.2% butanol, which was 5.3-fold of control strain. Remarkably, E. coli engineered with SecBT10A could tolerate as high as 1.8% butanol (~ 14.58 g/L). The binding affinity of SecBT10A toward model substrate unfolded maltose binding protein (preMBP) was 11.9-fold of that of WT SecB as determined by isothermal titration calorimetry. Residue T10 locates at the entrance of hydrophobic substrate binding groove of SecB, and might play an important role in recognition and binding of cargo proteins. CONCLUSIONS: SecB chaperone was identified by chaperone mining to be effective in enhancing butanol tolerance of E. coli. Maximum butanol tolerance of E. coli could reach 1.6% and 1.8% butanol by engineering single gene of SecB or SecBT10A. Hydrophobic interaction is vital for enhanced binding affinity between SecB and cargo proteins, and therefore improved butanol tolerance.

Metabolic engineering of Corynebacterium glutamicum for improved L-arginine synthesis by enhancing NADPH supply.

Corynebacterium glutamicum SNK 118 was metabolically engineered with improved L-arginine titer. Considering the crucial role of NADPH level in L-arginine production, pntAB (membrane-bound transhydrogenase) and ppnK (NAD+ kinase) were co-expressed to increase the intracellular NADPH pool. Expression of pntAB exhibited significant effects on NADPH supply and L-arginine synthesis. Furthermore, argR and farR, encoding arginine repressor ArgR and transcriptional regulator FarR, respectively, were removed from the genome of C. glutamicum. The competitive branch pathway gene ldh was also deleted. Eventually, an engineered C. glutamicum JML07 was obtained for L-arginine production. Fed-batch fermentation in 5-L bioreactor employing strain JML07 allowed production of 67.01 g L-1L-arginine with productivity of 0.89 g L-1 h-1 and yield of 0.35 g g-1 glucose. This study provides a productive L-arginine fermentation strain and an effective cofactor manipulating strategy for promoting the biosynthesis of NADPH-dependent metabolites.

Improving Soluble Expression of Tyrosine Decarboxylase from Lactobacillus brevis for Tyramine Synthesis with High Total Turnover Number.

The soluble expression of tyrosine decarboxylase (TDC) in heterologous host is often challenging. Here, acidic condition was found to be favorable for improving the soluble expression of TDC from Lactobacillus brevis in Escherichia coli, while addition of carbohydrates (such as glucose, arabinose, and fructose) was vital for decreasing the insoluble fraction. By simple pH control and addition of glucose, the specific activity of TDC in crude extract was enhanced to 46.3 U mg-1, 3.67-fold of that produced from LB medium. Optimization of the reaction conditions revealed that Tween-80 was effective in improving the tyramine production catalyzed by TDC, especially at high tyrosine loadings. As much as 400 mM tyrosine could be completely converted into tyramine with a substrate to catalyst ratio of 29.0 g g-1 and total turnover number of 23,300. This study provides efficient strategies for the highly soluble expression of TDC and biocatalytic production of tyramine.

Structural Insight into Enantioselective Inversion of an Alcohol Dehydrogenase Reveals a "Polar Gate" in Stereorecognition of Diaryl Ketones.

Diaryl ketones are important building blocks for synthesizing pharmaceuticals and are generally regarded as "difficult-to-reduce" ketones due to the large steric hindrance of their two bulky aromatic side chains. Alcohol dehydrogenase from Kluyveromyces polyspora ( KpADH) has been identified as a robust biocatalyst due to its high conversion of diaryl ketone substrate (4-chlorophenyl)(pyridine-2-yl)ketone (CPMK) with a moderate R-selectivity of 82% ee. To modulate the stereoselectivity of KpADH, a "polarity scanning" strategy was proposed, in which six key residues inside and at the entrance of the substrate binding pocket were identified. After iterative combinatorial mutagenesis, variants Mu-R2 and Mu-S5 with enhanced (99.2% ee, R) and inverted (97.8% ee, S) stereoselectivity were obtained. The crystal structures of KpADH and two mutants in complex with NADPH were resolved to elucidate the evolution of enantioselective inversion. Based on MD simulation, Mu-R2-CPMKProR and Mu-S5-CPMKProS were more favorable in the formation of prereaction states. Interestingly, a quadrilateral plane formed by α-carbons of four residues (N136, V161, C237, and G214) was identified at the entrance of the substrate binding pocket of Mu-S5; this plane acts as a "polar gate" for substrates. Due to the discrepancy in charge characteristics between chlorophenyl and pyridine substituents, the pro- S orientation of CPMK is defined when it passes through the "polar gate" in Mu-S5, whereas the similar plane in wild-type is blocked by several aromatic residues. Our result paves the way for engineering stereocomplementary ADH toward bulky diaryl ketones and provides structural insight into the mechanism of stereoselective inversion.

Detoxification of furfural residues hydrolysate for butanol fermentation by Clostridium saccharobutylicum DSM 13864.

The toxicity of furfural residues (FRs) hydrolysate is a major obstacle in its application. This work focused on the detoxification of FRs hydrolysate and its application in butanol fermentation. Combination of activated carbon and resin 717 was appropriate for the detoxification of hydrolysate. Mixed sterilization of FRs hydrolysate and corn steep liquor (CSL) was better than the separate ones, since proteins in CSL could adsorb and remove toxic components during sterilization. The results further confirmed that simultaneous sterilization of activated carbon + resin and fermentation medium was more efficient for detoxification and butanol production, in which 76.4% of phenolic compounds and 99.3% of Maillard reaction products were removed, 8.48 g/L butanol and 12.61 g/L total solvent were obtained. This study provides feasible and economic approaches for the detoxification of FRs hydrolysate and its application in butanol production.

Identification of d-carbamoylase for biocatalytic cascade synthesis of d-tryptophan featuring high enantioselectivity.

In this study, an enantioselective d-carbamoylase (AcHyuC) was identified from Arthrobacter crystallopoietes with optimum pH of 8.5, much more compatible with hydantoinase process than other reported d-N-carbamoylases. AcHyuC has a substrate preference for aromatic carbamoyl-compounds. The dynamic kinetic resolution (DKR) cascade was developed by combining this AcHyuC with hydantoin racemase from Arthrobacter aurescens (AaHyuA) and d-hydantoinase from Agrobacterium tumefaciens (AtHyuH) for enantioselective resolution of l-indolylmethylhydantoin into d-Trp. The optimum pH of DKR cascade reaction was determined to be 8.0, and PEG 400 could facilitate the reaction. As much as 80mM l-indolylmethylhydantoin could be fully converted to d-Trp within 12h at 0.5L scale, with 99.4% yield, >99.9% e.e. and productivity of 36.6gL-1d-1. This study provides a new d-carbamoylase compatible with the DKR cascade for efficient production of optically pure d-Trp from l-indolylmethylhydantoin.

High production of genistein diglucoside derivative using cyclodextrin glycosyltransferase from Paenibacillus macerans.

Genistein has been regarded as one important soy isoflavone with multiple health benefits, whereas its applications are limited by the low hydrophilicity. To improve the water solubility, codon optimized cyclodextrin glycosyltransferase from Paenibacillus macerans was employed for genistein transglycosylation in this study. At least four transglycosylation products were produced and identified by HPLC and LC-MS: genistein monoglucoside, diglucoside, triglucoside, and tetraglucoside derivatives. Obviously, the yields of genistein monoglucoside and genistein diglucoside exhibited great superiority compared with other two products. To maximize the yield of genistein diglucoside, various reaction conditions such as genistein dissolvents, glycosyl donors, substrates concentrations and ratios, enzyme concentrations, reaction pH, temperature, and time were optimized. Finally, the yield of genistein diglucoside was enhanced by 1.5-fold under the optimum reaction system. Our study demonstrates that the production of genistein diglucoside could be specifically enhanced, which is one important genistein derivative with better water solubility and stability.