Mini critical review: Membrane fouling control in membrane bioreactors by microalgae.

Membrane bioreactors (MBRs) hold significant promise for wastewater treatment, yet the persistent challenge of membrane fouling impedes their practical application. One promising solution lies in the synergy between microalgae and bacteria, offering efficient nutrient removal, reduced energy consumption, and potential mitigation of extracellular polymeric substances (EPS) concentrations. Inoculating microalgae presents a promising avenue to address membrane fouling in MBRs. This review marks the first exploration of utilizing microalgae for membrane fouling control in MBR systems. The review begins with a comprehensive overview of the evolution and distinctive traits of microalgae-MBRs. It goes further insight into the performance and underlying mechanisms facilitating the reduction of membrane fouling through microalgae intervention. Moreover, the review not only identifies the challenges inherent in employing microalgae for membrane fouling control in MBRs but also illuminates prospective pathways for future advancement in this burgeoning field.

Nitrogen and phosphorus removal performance of sequential batch operation for algal cultivation through suspended-solid phase photobioreactor.

Nitrogen (N) and phosphorus (P) absorbed by algae in the suspended-solid phase photobioreactor (ssPBR) have emerged as an efficient pathway to purify the effluent of wastewater treatment plants (WWTPs). However, the key operational parameters of the ssPBR need to be optimized. In this study, the stability of the system after sequential batch operations and the efficiency under various influent P concentrations were evaluated. The results demonstrated that the ssPBR maintained a high N/P removal efficiency of 96 % and 98 %, respectively, after 5 cycles. When N was kept at 15 mg/L and P ranged from 1.5 to 3.0 mg/L, the system yielded plenty of algae products and guaranteed the effluent quality that met the discharge standards. Notably, the carriers were a key contributor to the high metabolism of algae and high performance. This work provided theoretical ideas and technical guidance for effluent quality improvement in WWTPs.

New chitosan-biochar composite derived from agricultural waste for removing sulfamethoxazole antibiotics in water.

This study aims to develop a new chitosan-biochar composite derived from agricultural waste for removing sulfamethoxazole (SMX) antibiotics in water. Biochar was prepared from orange peel (OB) and spent coffee grounds (SCB). To fabricate chitosan-biochar composites, chitosan and biochar were crosslinked with glutaraldehyde. Results showed that pH, adsorbent dosage, time, temperature, and initial concentrations have a significant impact on the SMX adsorption. The adsorption data was better described by Langmuir (with good regression) than Freundlich model. The highest adsorption capacity (Qmax) of SMX on OB, SCB, CTS-OB, and CTS-SCB were 3.49, 7.65, 7.24, and 14.73 mg/g, respectively. The Freundlich constant (KF) values for adsorption capacity were 1.66, 1.91, 2.57, and 5.57 (mg1-nLn/g), respectively, for OB, SCB, CTS-OB, and CTS-SCB. Ion exchange, π bonding, hydrogen bonding and pore filling, were proposed as dominant mechanisms of SMX removal process.

A critical review on utilization of sewage sludge as environmental functional materials.

Sewage sludge (SS) is increasingly used as an environment functional material to reduce or control pollution and improve plant growth because of the large amounts of carbon and essential plant nutrients in it. To achieve the best application results, it is essential to comprehensively review recent progress in SS utilization. This review aims to fill the gaps in knowledge by describing the properties of SS, and its usage as adsorbents, catalysts and fertilizers, and certain application mechanisms. Although SS generates several benefits for the environment and humans, many challenges still exist to limit the application, including the risks posed by potentially toxic substances (e.g., heavy metals) in SS. Therefore, future research directions are discussed and how to make SS applications more feasible in terms of technology and economy.

Enhanced energy production and biological treatment of swine wastewater using anaerobic membrane bioreactor: Fouling mechanism and microbial community.

This study aimed to reveal the membrane fouling mechanisms during anaerobic membrane bioreactor (AnMBR) operation for swine wastewater treatment under different organic loading rates (OLR). Results showed that AnMBR could achieve high pollutant removal (71.9-83.6 %) and energy recovery (0.18-0.23 L-CH4/g-COD) at an OLR range of 0.25-0.5 g-COD/g-VSS.d, realizing energy production. However, higher OLR would aggravate the membrane fouling due to accumulation of fine sludge particles, organic foulants, and extracellular polymeric substances (EPS) on cake layer. Based on the high-throughput sequencing, microbial communities significantly changed and fouling-causing bacteria (e.g. Pseudomonas, Methanosarcina and Methanothrix) enriched in the cake layer at higher OLR conditions, leading to lower membrane permeability. Backwash can effectively remove the cake layer from the membrane surface and recover membrane permeability. The present study provides important information about membrane fouling and microbial information that could have significant impact on large-scale AnMBR application.

Sustainable management of municipal solid waste through waste-to-energy technologies.

Increasing municipal solid waste (MSW) generation and environmental concerns have sparked global interest in waste valorization through various waste-to-energy (WtE) to generate renewable energy sources and reduce dependency on fossil-derived fuels and chemicals. These technologies are vital for implementing the envisioned global "bioeconomy" through biorefineries. In light of that, a detailed overview of WtE technologies with their benefits and drawbacks is provided in this paper. Additionally, the biorefinery concept for waste management and sustainable energy generation is discussed. The identification of appropriate WtE technology for energy recovery continues to be a significant challenge. So, in order to effectively apply WtE technologies in the burgeoning bioeconomy, this review provides a comprehensive overview of the existing scenario for sustainable MSW management along with the bottlenecks and perspectives.

Comparison of degradation kinetics of tannery wastewater treatment using a nonlinear model by salt-tolerant Nitrosomonas sp. and Nitrobacter sp.

Conventional biological treatment has been reported to be ineffective for pollutant removal in tannery wastewater due to high salinity. To overcome it, this work used salt-tolerant bacteria (STB) isolated from a membrane bioreactor to evaluate the organic and nutrient removal through a series of batch experiments. Compared with the control, the STB reactor enhanced the reduction of persistent organics by 11% based on the double exponential decay model. Besides, the removal of NH4+-N is 26% higher, satisfying the first-order decay model. The nitrification was inhibited entirely in control during 48 h, whilst the assimilation process involved 55% of total nitrogen removal. In the STB reactor, nitrification occurred after 12 h, resulting in significantly increased NO2--N and NO3--N concentrations according to the logistic function. Although nitrification was successfully activated, C/N ratios and free ammonia were identified as limiting factors for STB activity, requiring mitigation strategies in further studies.

Enhancement of urea removal from reclaimed water using thermally modified spent coffee ground biochar activated by adding peroxymonosulfate for ultrapure water production.

To enhance the degradation of urea in reclaimed water for producing ultrapure water (UPW), thermally modified biochar (TBC) was prepared by secondary pyrolysis using spent coffee biochar with the function as an activator of peroxymonosulfate (PMS). Results showed that 94.4% of urea can be degraded effectively by the TBC-PMS system at the dosage of 0.4 g/L TBC and 2 g/L PMS under neutral and weak acid conditions. Moreover, urea removal mainly depended on the free radical pathway (SO4• - and OH•), especially OH•. The inorganic anions of TBC increased via secondary pyrolysis, especially carbonate and phosphate, resulting in higher electrical conductance (EC) value than the original biochar. It was conducive to activating PMS. As well, C-O, -OH worked as an active site in the TBC-PMS system, providing electrons and activating PMS. This work provides a novel strategy for UPW production using TBC-PMS system.

Current application of algae derivatives for bioplastic production: A review.

Improper use of conventional plastics poses challenges for sustainable energy and environmental protection. Algal derivatives have been considered as a potential renewable biomass source for bioplastic production. Algae derivatives include a multitude of valuable substances, especially starch from microalgae, short-chain length polyhydroxyalkanoates (PHAs) from cyanobacteria, polysaccharides from marine and freshwater macroalgae. The algae derivatives have the potential to be used as key ingredients for bioplastic production, such as starch and PHAs or only as an additive such as sulfated polysaccharides. The presence of distinctive functional groups in algae, such as carboxyl, hydroxyl, and sulfate, can be manipulated or tailored to provide desirable bioplastic quality, especially for food, pharmaceutical, and medical packaging. Standardizing strains, growing conditions, harvesting and extracting algae in an environmentally friendly manner would be a promising strategy for pollution control and bioplastic production.

Urea removal in reclaimed water used for ultrapure water production by spent coffee biochar/granular activated carbon activating peroxymonosulfate and peroxydisulfate.

This study evaluated the performance of spent coffee biochar (SCBC)/granular activated carbon (GAC) activating peroxymonosulfate (PMS) and peroxydisulfate (PDS) for urea degradation in reclaimed water used for ultrapure water production. Results showed that catalyst and oxidant wielded a great influence on urea removal. Of them, the GAC-PMS system could completely remove urea at the least oxidant (1 g/L) and catalyst dosage (0.2 g/L). GAC activating PMS mainly depended on graphite C structure and minor oxygen functional groups. However, the amounts of urea removed by 600BC-PMS and 900BC-PMS were 57% and 70%, respectively. In the PDS system, the urea removal through GAC-PDS could reach 90%, which mainly depends on the graphite C structure of GAC. Using the same conditions, the urea removal of 900BC-PDS was similar to GAC-PDS, so it has some potential as an alternative to commercial GAC.

Co-culture of microalgae-activated sludge in sequencing batch photobioreactor systems: Effects of natural and artificial lighting on wastewater treatment.

Co-culture using microalgae-activated sludge in Sequencing Batch Photobioreactors (PBRs) was investigated for wastewater treatment performance. This study evaluated the effect of natural and artificial lighting conditons on treatment performance under consideration of energy consumption. The results found that the removal of nutrients and COD of natural lighting condition was only 10% and 13% lower than those of artificial lighting respectively. Generally, artificial lighting mode took an advantage in pollutants removal. However, standing at 0.294 kWh L-1, the total energy consumption of natural lighting was over two times less than that of artificial lighting. It reveals the natural lighting system played a dominant role for cutting energy costs significantly compared to artificial lighting one (∼57%). As a practical viewpoint on energy aspect and treatment performance, a natural lighting PBR system would be a sustainable option for microalgae-activated sludge co-culture system treating wastewater.

Non-submerged attached growth process for domestic wastewater treatment: Influence of media types and internal recirculation ratios.

This study is aimed to comprehend the treatment of non-submerged attached growth systems using bio-sponge, bio-cord, and bio-cloth media. Three reactors were set up with internal recirculation ratio of 1 (IR = 1) and similar media surface area. Bio-sponge and bio-cloth reactors showed removal of COD (79 vs. 76%) and NH4+-N (78 vs. 73%). While bio-cord treatment was deteriorated due to time-dependent process. Multiple linear regression revealed that alkalinity governed the formation degree of the anaerobic zone in bio-sponges, partially affecting nitrification. Increasing IR from 1 to 3 caused sloughing of the attached biomass and was positively correlated with effluent nitrite nitrogen concentration, indicating the sensitivity of nitrification to spatial distribution effects. In addition, bio-sponge system obtained superior performance at IR of 2 while bio-cloth one might be also an effective media for wastewater treatment if having good durability.

Phthalates in the environment: characteristics, fate and transport, and advanced wastewater treatment technologies.

Phthalates are well-known emerging contaminants that harm human health and the environment. Therefore, this review aims to discuss about the occurrence, fate, and phthalates concentration in the various environmental matrices (e.g., aquatic, sediment, soil, and sewage sludge). Hence, it is necessary to treat sources containing phthalates before discharging them to aqueous environment. Various advanced wastewater treatments including adsorption process (e.g., biochar, activated carbon), advanced oxidation processes (e.g., photo-fenton, ozonation, photocatalysis), and biological treatment (membrane bioreactor) have been successfully to address this issue with high removal efficiencies (70-95%). Also, the degradation mechanism was discussed to provide a comprehensive understanding of the phthalate removal for the reader. Additionally, key factors that influenced the phthalates removal efficiency of these technologies were identified and summarized with a view towards pilot-scale and industrial applications.

A breakthrough dynamic-osmotic membrane bioreactor/nanofiltration hybrid system for real municipal wastewater treatment and reuse.

This study designed a Dynamic-Osmotic membrane bioreactor/nanofiltration (OsMBR/NF) system for municipal wastewater treatment and reuse. Results indicated that a continuously rotating FO module with 60 RPM in Dynamic-OsMBR system could enhance shear stress and reduce cake layer of foulants, leading to higher flux (50%) compared to Traditional-OsMBR during a 40-operation day. A negligible specific reverse salt flux (0.059 G/L) and a water flux of 2.86 LMH were recorded when a mixture of 0.1 M EDTA-2Na/0.1 M Na2CO3/0.9 mM Triton114 functioned as draw solution (DS). It was found that the Dynamic-OsMBR/NF hybrid system could effectively remove pollutants (∼98% COD, ∼99% PO43-P, ∼93% NH4+-N, > 99% suspended solids) from wastewater. In short, this developed system can be considered a breakthrough technology as it successfully minimizes membrane fouling by shear force, and achieves high water quality for reuse by two membrane- barriers.

A review on integrated approaches for municipal solid waste for environmental and economical relevance: Monitoring tools, technologies, and strategic innovations.

Rapid population growth, combined with increased industrialization, has exacerbated the issue of solid waste management. Poor management of municipal solid waste (MSW) not only has detrimental environmental consequences but also puts public health at risk and introduces several other socioeconomic problems. Many developing countries are grappling with the problem of safe disposing of large amounts of produced municipal solid waste. Unmanaged municipal solid waste pollutes the environment, so its use as a potential renewable energy source would aid in meeting both increased energy needs and waste management. This review investigates emerging strategies and monitoring tools for municipal solid waste management. Waste monitoring using high-end technologies and energy recovery from MSW has been discussed. It comprehensively covers environmental and economic relevance of waste management technologies based on innovations achieved through the integration of approaches.

Roles and applications of enzymes for resistant pollutants removal in wastewater treatment.

Resistant pollutants like oil, grease, pharmaceuticals, pesticides, and plastics in wastewater are difficult to be degraded by traditional activated sludge methods. These pollutants are prevalent, posing a great threat to aquatic environments and organisms since they are toxic, resistant to natural biodegradation, and create other serious problems. As a high-efficiency biocatalyst, enzymes are proposed for the treatment of these resistant pollutants. This review focused on the roles and applications of enzymes in wastewater treatment. It discusses the influence of enzyme types and their sources, enzymatic processes in resistant pollutants remediation, identification and ecotoxicity assay of enzymatic transformation products, and typically employed enzymatic wastewater treatment systems. Perspectives on the major challenges and feasible future research directions of enzyme-based wastewater treatment are also proposed.

Fluorescence analysis of centralized water supply systems: Indications for rapid cross-connection detection and water quality safety guarantee.

Better insight into non-potable reclaimed water and drinking water can produce more reliable risk assessment and help to achieve sustainable water reuse in the long-term. This study illustrates the effectiveness of fluorescence excitation-emission matrix (EEM) for rapid cross-connection detection. Based on samples collected from three different sites of China, it is identified that the overall fluorescence intensity was 6-31 times of reclaimed to drinking water in water samples at all FRI regions. This is shown to be highly sensitive over conventional water quality parameters. Furthermore, based on parallel factor analysis (PARAFAC), humic acid and tryptophan are considered as the main components contributing to fluorescence both in secondary and tertiary effluents. Total fluorescence intensities as well as fluorescence peaks of EEM pairs were investigated. Under different mixing scenarios, it is found that the signal is distinguishable as low as 20% of reclaimed water. This study also offers possibility of exploring portable devices with identified fluorescence peaks in EEM regions for risk prevention and water quality monitoring at end user sites.

Bio-based rhamnolipids production and recovery from waste streams: Status and perspectives.

Bio-based rhamnolipid production from waste streams is gaining momentum nowadays because of increasing market demand, huge range of applications and its economic and environment friendly nature. Rhamnolipid type biosurfactants are produced by microorganisms as secondary metabolites and have been used to reduce surface/interfacial tension between two different phases. Biosurfactants have been reported to be used as an alternative to chemical surfactants. Pseudomonas sp. has been frequently used for production of rhamnolipid. Various wastes can be used in production of rhamnolipid. Rhamnolipids are widely used in various industrial applications. The present review provides information about structure and nature of rhamnolipid, production using different waste materials and scale-up of rhamnolipid production. It also provides comprehensive literature on various industrial applications along with perspectives and challenges in this research area.

Characterization of preconcentrated domestic wastewater toward efficient bioenergy recovery: Applying size fractionation, chemical composition and biomethane potential assay.

Domestic wastewater (DWW) can be preconcentrated to facilitate energy recovery via anaerobic digestion (AD), following the concept of "carbon capture-anaerobic conversion-bioenergy utilization." Herein, real DWW and preconcentrated domestic wastewater (PDWW) were both subject to particle size fractionation (0.45-2000 µm). DWW is a type of low-strength wastewater (average COD of 440.26 mg/L), wherein 60% of the COD is attributed to the substances with particle size greater than 0.45 µm. Proteins, polysaccharides, and lipids are the major DWW components. PDWW with a high COD concentration of 2125.89 ± 273.71 mg/L was obtained by the dynamic membrane filtration (DMF) process. PDWW shows larger proportions of settleable and suspended fractions, and accounted for 63.4% and 33.8% of the particle size distribution, and 52.4% and 32.2% of the COD, respectively. The acceptable biomethane potential of 262.52 ± 11.86 mL CH4/g COD of PDWW indicates bioenergy recovery is feasible based on DWW preconcentration and AD.