Diarylformamides as a safe reservoir and room temperature source of ultra-pure CO for a 'green' rWGS reaction.

Diarylformamides are shown to be a safe reservoir and source of CO. Perfectly selective decarbonylation is achieved in solution at room temperature with potassium and cesium diarylamide catalysts. Moreover, solvent-free decarbonylations may be run either in a diphenylformamide melt at 70 ºC or, when the bisformamide 9 is used, in the solid state at 88 ºC in virtue of its improved atom economy. These These simple and practical transition-metal-free reactions afford ultra-pure (i.e. dry and solvent-free) CO at moderate temperatures and the byproduct diarylamines are recycled as pure compounds. In the absence of catalysts, diarylformamides 1 and 9 are long-term stable at > 200 ºC.  DFT-calculations indicate a reaction pathway with a rate-determining deprotonation of Ph2NC(O)H and a barrier-free CO elimination from Ph2NC(O)-.

Mixing and matching N,N- and N,O-chelates in anionic Mg(I) compounds: synthesis and reactivity with RNCNR and CO.

Reduction of [Mg(NON)]2 ([NON]2- = [O(SiMe2NDipp)2]2-, Dipp = 2,6-iPr2C6H3) affords Mg(I) species containing NON- and NNO-ligands ([NNO]2- = [N(Dipp)SiMe2N(Dipp)SiMe2O]2-). The products of reactions with iPrNCNiPr and CO are consistent with the presence of reducing Mg(I) centres. Extraction with THF affords [K(THF)2]2[(NNO)Mg-Mg(NNO)] with a structurally characterised Mg-Mg bond that was examined using density functional theory.

Formation, Structure and Reactivity of a Beryllium(0) Complex with Mgδ+-Beδ- Bond Polarization.

Attempts to create a novel Mg-Be bond by reaction of [(DIPePBDI*)MgNa]2 with Be[N(SiMe3)2]2 failed; DIPePBDI*=HC[(tBu)C=N(DIPeP)]2, DIPeP=2,6-Et2C-phenyl. Even at elevated temperatures, no conversion was observed. This is likely caused by strong steric shielding of the Be center. A similar reaction with the more open Cp*BeCl gave in quantitative yield (DIPePBDI*)MgBeCp* (1). The crystal structure shows a Mg-Be bond of 2.469(4) Å. Homolytic cleavage of the Mg-Be bond requires ΔH=69.6 kcal mol-1 (cf. CpBe-BeCp 69.0 kcal mol-1 and (DIPPBDI)Mg-Mg(DIPPBDI) 55.8 kcal mol-1). Natural-Population-Analysis (NPA) shows fragment charges: (DIPePBDI*)Mg +0.27/BeCp* -0.27. The very low NPA charge on Be (+0.62) compared to Mg (+1.21) and the strongly upfield 9Be NMR signal at -23.7 ppm are in line with considerable electron density on Be and the formal oxidation state assignment of MgII-Be0. Despite this Mgδ+-Beδ- polarity, 1 is extremely thermally stable and unreactive towards H2, CO, N2, cyclohexene and carbodiimide. It reacted with benzophenone, azobenzene, phenyl acetylene, CO2 and CS2. Reaction with 1-adamantyl azide led to reductive coupling and formation of an N6-chain. The azide reagent also inserted in the Cp*-Be bond. The inertness of 1 is likely due to bulky ligands protecting the Mg-Be unit.

Similarities and Differences in Benzene Reduction with Ca, Sr, Yb and Sm: Strong Evidence for Tetra-Anionic Benzene.

Inverse sandwich complexes of Yb and Sm stabilized by a bulky ß-diketiminate (BDI) ligand have been prepared: (BDI)Ln(η6,η6-C6H6)Ln(BDI); Ln=lanthanide. Coordinated benzene ligands can be neutral, di-anionic or, often controversially discussed, even tetra-anionic. The formal charge on benzene is correlated to assignment of the metal oxidation state which generally poses a problem. Herein, we take advantage of the structural similarities found when comparing CaII with YbII, and SrII with SmII complexes. In this work, we found an excellent overlap of the Ca/Yb inverse sandwich structures but a striking difference for the Sr/Sm pair. The much shorter Sm-N and Sm-C6H6 distances are strong evidence for a SmIII-benzene-4-SmIII assignment. This was further supported by NMR spectroscopy, magnetic susceptibility, reactivity and comprehensive computational investigation.

s-Block metal complexes of superbulky (tBu3Si)2N-: a new weakly coordinating anion?

Sterically hindered amide anions have found widespread application as deprotonation agents or as ligands to stabilize metals in unusual coordination geometries or oxidation states. The use of bulky amides has also been advantageous in catalyst design. Herein we present s-block metal chemistry with one of the bulkiest known amide ligands: (tBu3Si)2N- (abbreviated: tBuN-). The parent amine (tBuNH), introduced earlier by Wiberg, is extremely resistant to deprotonation (even with nBuLi/KOtBu superbases) but can be deprotonated slowly with a blue Cs+/e- electride formed by addition of Cs0 to THF. (tBuN)Cs crystallized as a separated ion-pair, even without cocrystallized solvent. As salt-metathesis reactions with (tBuN)Cs are sluggish and incomplete, it has only limited use as an amide transfer reagent. However, ball-milling with LiI led to quantitative formation of (tBuN)Li and CsI. Structural characterization shows that (tBuN)Li is a monomeric contact ion-pair with a relatively short N-Li bond, an unusual T-shaped coordination geometry around N and extremely short Li⋯Me anagostic interactions. Crystal structures are compared with Li and Cs complexes of less bulky amide ligands (iPr3Si)2N- (iPrN-) and (Me3Si)2N- (MeN-). DFT calculations show trends in the geometries and electron distributions of amide ligands of increasing steric bulk (MeN- < iPrN- < tBuN-) and confirm that tBuN- is a rare example of a halogen-free weakly coordinating anion.

Synthesis of Superbulky Amide Ligands by Addition of Polar Reagents to Sila-Imine.

The chemistry of extremely bulky amide ligands is troubled by difficulties in deprotonation of the parent amine. As an alternative route to superbulky amide reagents, the addition of polar reagents to a sila-imine has been investigated. Attempts to synthesize the superbulky amide anion (tBu3Si)2N- by addition of tBuLi to tBu2Si=N(SitBu3) failed and gave tBu3Si(tBu2HSi)NLi and isobutene. Reaction of the sila-imine with KOtBu successfully led to tBu3Si[tBu2(tBuO)Si]NK which crystallized as a separated ion-pair. Reaction with the slightly bulkier KOAd (Ad=1-adamantyl) led in presence of THF to ether ring-opening. Reaction with tBuOH gave tBu3Si[tBu2(tBuO)Si]NH but this amine cannot be easily deprotonated. Reaction with (BDI*)MgnBu in presence of THF gave (BDI*)Mg+ ⋅ (THF)2 and the non-coordinating anion tBu3Si[tBu2(nBu)Si]N-; BDI*=ß-diketiminate ligand HC[C(tBu)N-DIPP]2, DIPP=2,6-diisopropylphenyl. Reaction of Mg(nBu)2 with tBu2Si=N(SitBu3) led to a Mg complex with one amide ligand: tBu3Si[tBu2(nBu)Si]N-. The other superbulky amide anion isomerized by internal deprotonation of a tBu-substituent to give a primary carbanion that is also coordinated to Mg. Although the amide-to-carbanion isomerization is highly contrathermodynamic, it allows for coordination of both anions to a single Mg center. The new bulky amides are rare cases of halogen-free weakly coordinating anions.

Metal Vapour Synthesis of an Organometallic Barium(0) Synthon.

A hydrocarbon-soluble barium anthracene complex was prepared by means of metal vapour synthesis. Reaction of 9,10-bis(trimethylsilyl)anthracene (Anth'') with barium vapour gave deep purple Ba(Anth'') which after extraction with diethyl ether crystallised as the cyclic octamer [Ba(Anth'')⋅Et2 O]8 . Dissolution in benzene or toluene led to replacement of the Et2 O ligand with a softer arene ligand and isolation of Ba(Anth'')⋅arene. Diffusion ordered spectroscopy (DOSY NMR ) measurements in benzene-d6 indicate solution species with a molecular weight that equals a trimeric constitution. Natural population analysis (NPA) assigned charges of +1.70 and -1.70 to Ba and Anth'', respectively, relating to highly ionic Ba2+ /Anth''2- bonding. Preliminary reactivity studies with air, Ph2 C=NPh, or H2 show that the complex reacts as a Ba0 synthon by release of neutral Anth''. This soluble molecular Ba0 /BaII redox synthon provides new routes for the syntheses of barium complexes under mild conditions.

A combined gas-phase dissociative ionization, dissociative electron attachment and deposition study on the potential FEBID precursor [Au(CH3)2Cl]2.

Motivated by the potential of focused-electron-beam-induced deposition (FEBID) in the fabrication of functional gold nanostructures for application in plasmonic and detector technology, we conducted a comprehensive study on [Au(CH3)2Cl]2 as a potential precursor for such depositions. Fundamental electron-induced dissociation processes were studied under single collision conditions, and the composition and morphology of FEBID deposits fabricated in an ultrahigh-vacuum (UHV) chamber were explored on different surfaces and at varied beam currents. In the gas phase, dissociative ionization was found to lead to significant carbon loss from this precursor, and about 50% of the chlorine was on average removed per dissociative ionization incident. On the other hand, in dissociative electron attachment, no chlorine was removed from the parent molecule. Contrary to these observations, FEBID in the UHV setup was found to yield a quantitative loss and desorption of the chlorine from the deposits, an effect that we attribute to electron-induced secondary and tertiary reactions in the deposition process. We find this precursor to be stable at ambient conditions and to have sufficient vapor pressure to be suitable for use in HV instruments. More importantly, in the UHV setup, FEBID with [Au(CH3)2Cl]2 yielded deposits with high gold content, ranging from 45 to 61 atom % depending on the beam current and on the cleanliness of the substrates surface.

Opportunities with calcium Grignard reagents and other heavy alkaline-earth organometallics.

More than a century old, magnesium Grignard reagents remain essential to the toolbox of organic chemists. Although similar reagents with the neighbouring group 2 metal Ca have been explored, the considerably higher polarity and reactivity of the Ca-C bond result in undesired decomposition pathways. Ca Grignard reagents have found academic interest but have never fully developed into an established synthetic tool. Recent research activities, however, provide facile access to these highly reactive organocalcium species, including in situ preparation and ball milling approaches to tackle the challenge of controlling their extreme sensitivity. Heavier Grignard reagents are not just more reactive but profit from unique chemical transformations. Insight into the transition metal-like properties of Ca, Sr and Ba is only just emerging. Considering the rapidly developing field of alkaline-earth metal-mediated catalysis, heavy Grignard reagents will probably have a bright future.

On the existence of low-valent magnesium-calcium complexes.

DFT-Calculations predict that a low-valent complex (BDI)Mg-Ca(BDI) with bulky ß-diketiminate (BDI) ligands is thermodynamically stable. It was attempted to isolate such a complex by salt-metathesis between [(DIPePBDI*)Mg-Na+]2 and [(DIPePBDI)CaI]2 (DIPePBDI = HC[C(Me)N-DIPeP]2; DIPePBDI* = HC[C(tBu)N-DIPeP]2; DIPeP = 2,6-CH(Et)2-phenyl). Whereas in alkane solvents no reaction was observed, salt-metathesis in C6H6 led to immediate C-H activation of benzene to give (DIPePBDI*)MgPh and (DIPePBDI)CaH, the latter crystallizing as a THF-solvated dimer [(DIPePBDI)CaH·THF]2. Calculations suggest reduction and insertion of benzene in the Mg-Ca bond. The activation enthalpy for the subsequent decomposition of C6H62- into Ph- and H- is only 14.4 kcal mol-1. Repeating this reaction in the presence of naphthalene or anthracene led to heterobimetallic complexes in which naphthalene2- or anthracene2- anions are sandwiched between (DIPePBDI*)Mg+ and (DIPePBDI)Ca+ cations. These complexes slowly decompose to their homometallic counterparts and further decomposition products. Complexes in which naphthalene2- or anthracene2- anions are sandwiched between two (DIPePBDI)Ca+ cations were isolated. The low-valent complex (DIPePBDI*)Mg-Ca(DIPePBDI) could not be isolated due to its high reactivity. There is, however, strong evidence that this heterobimetallic compound is a fleeting intermediate.

Silver cation tagged on 5,7,12,14-tetraphenyl-6,13-diazapentacene and its dihydro-form.

The attachment of silver(I) cations to 5,7,12,14-tetraphenyl-6,13-diazapentacene and its reduced dihydro-form has been studied by electrospray ionization mass spectrometry (ESI-MS). The structure elucidation of the Ag+ complexes has been accomplished in gas-phase collision experiments in conjunction with density functional theory (DFT) calculations. The oxidized form provides a favourable cavity for the Ag+ ion, leading to the [1 : 1] complex with the highest resilience towards dissociation and severely hindering the attainment of a second molecular ligand. When the nitrogen is hydrogenated in the reduced dihydro-form, the cavity is partly blocked. This leads to a less strongly bound [1 : 1] complex ion but facilitates the attachment of a second molecular ligand to the Ag+. The resulting complex is the most stable among the [2 : 1] complexes. DFT calculations provide valuable insight into the geometries of the complex ions. Adding silver(I) to the reduced dihydro-form for cationization also induces its oxidation in solution. The oxidative dehydrogenation reaction, for which a mechanism is proposed, proceeds by first order kinetics and is markedly accelerated by day light.

Lithium Aluminium Hydride and Metallic Iron: A Powerful Team in Alkene and Arene Hydrogenation Catalysis.

Alkenes that normally do not react with LiAlH4 (3-hexene, cyclohexene, 1-Me-cyclohexene), can be reduced to the corresponding alkanes by a mixture of LiAlH4 and Fe0 (the iron was activated by Metal-Vapour-Synthesis). This alkene-to-alkane conversion with a stoichiometric quantity of LiAlH4 /Fe0 does not need quenching with water or acids, implying that both H's originate from LiAlH4 . The LiAlH4 /Fe0 combination is also a remarkably potent cooperative catalyst for hydrogenation of multi-substituted alkenes and benzene or toluene. An induction period of circa two hours and the minimally required temperature of 120 °C, suggests that the actual catalyst is a combination of Fe0 and the decomposition product of LiAlH4 (LiH and Al0 ). A thermally pre-activated LiAlH4 /Fe0 catalyst did not need an induction time and is also active at room temperature and 1 bar H2 . A combination of AliBu3 and Fe0 is an even more active hydrogenation catalyst. Without pre-activation, tetra-substituted alkenes like Me2 C=CMe2 and toluene could be fully hydrogenated.

Alkaline-Earth Metal Mediated Benzene-to-Biphenyl Coupling.

Complex [(DIPeP BDI)Ca]2 (C6 H6 ), with a C6 H6 2- dianion bridging two Ca2+ ions, reacts with benzene to yield [(DIPeP BDI)Ca]2 (biphenyl) with a bridging biphenyl2- dianion (DIPeP BDI=HC[C(Me)N-DIPeP]2 ; DIPeP=2,6-CH(Et)2 -phenyl). The biphenyl complex was also prepared by reacting [(DIPeP BDI)Ca]2 (C6 H6 ) with biphenyl or by reduction of [(DIPeP BDI)CaI]2 with KC8 in presence of biphenyl. Benzene-benzene coupling was also observed when the deep purple product of ball-milling [(DIPP BDI)CaI(THF)]2 with K/KI was extracted with benzene (DIPP=2,6-CH(Me)2 -phenyl) giving crystalline [(DIPP BDI)Ca(THF)]2 (biphenyl) (52 % yield). Reduction of [(DIPeP BDI)SrI]2 with KC8 gave highly labile [(DIPeP BDI)Sr]2 (C6 H6 ) as a black powder (61 % yield) which reacts rapidly and selectively with benzene to [(DIPeP BDI)Sr]2 (biphenyl). DFT calculations show that the most likely route for biphenyl formation is a pathway in which the C6 H6 2- dianion attacks neutral benzene. This is facilitated by metal-benzene coordination.

On the Electron-Induced Reactions of (CH3)AuP(CH3)3: A Combined UHV Surface Science and Gas-Phase Study.

Focused-electron-beam-induced deposition (FEBID) is a powerful nanopatterning technique where electrons trigger the local dissociation of precursor molecules, leaving a deposit of non-volatile dissociation products. The fabrication of high-purity gold deposits via FEBID has significant potential to expand the scope of this method. For this, gold precursors that are stable under ambient conditions but fragment selectively under electron exposure are essential. Here, we investigated the potential gold precursor (CH3)AuP(CH3)3 using FEBID under ultra-high vacuum (UHV) and spectroscopic characterization of the corresponding metal-containing deposits. For a detailed insight into electron-induced fragmentation, the deposit's composition was compared with the fragmentation pathways of this compound through dissociative ionization (DI) under single-collision conditions using quantum chemical calculations to aid the interpretation of these data. Further comparison was made with a previous high-vacuum (HV) FEBID study of this precursor. The average loss of about 2 carbon and 0.8 phosphor per incident was found in DI, which agreed well with the carbon content of the UHV FEBID deposits. However, the UHV deposits were found to be as good as free of phosphor, indicating that the trimethyl phosphate is a good leaving group. Differently, the HV FEBID experiments showed significant phosphor content in the deposits.

Alkali metal influences in aluminyl complexes.

The previously reported potassium aluminyl complex [(BDI-H)Al-K+]2 was converted in Li+ or Na+ salts by a salt metathesis reaction with Li(BPh4) or Na(BPh4), respectively; BDI-H = dianionic [(DIPP)N-C(Me)C(H)-C(CH2)-N(DIPP)2-] and DIPP = 2,6-diisopropylphenyl. The Rb and Cs aluminyl complexes were obtained by reaction of (BDI)Al with RbC8 or CsC8; BDI = HC[C(Me)N(DIPP)]2. Crystal structures of two monomers, (BDI-H)Al-Li+·(Et2O)2 and (BDI-H)Al-Na+·(Et2O)(TMEDA), and four dimers [(BDI-H)Al-M+]2 (M = Li, Na, Rb, Cs) are discussed. Lewis base-free dimers [(BDI-H)Al-M+]2 crystallize either as slipped dimers (Li+, Na+) in which each Al center features only one Al-M contact or as a symmetric dimer (K+, Rb+, Cs+) in which the cation bridges both Al centers. The dimer with the largest cation (Cs+) shows Cs⋯CH2C interactions between dimers, resulting in a coordination polymer. AIM and charge analysis reveal highly ionic Al-M bonds with strong polarization of the Al lone-pair towards the smaller cation Li+ and Na+. The Al-M bonds become weaker from Li to Cs. Calculated dimerization energies suggest that in apolar solvents only complexes with the heavier metals Rb and Cs may be in a monomer-dimer equilibrium. This is confirmed by DOSY measurements in benzene. Dimeric aluminyl complexes with heavier alkali metals (K-Cs) react with benzene to give a double C-H activation in para-positions.

Teaming up main group metals with metallic iron to boost hydrogenation catalysis.

Hydrogenation of unsaturated bonds is a key step in both the fine and petrochemical industries. Homogeneous and heterogeneous catalysts are historically based on noble group 9 and 10 metals. Increasing awareness of sustainability drives the replacement of costly, and often harmful, precious metals by abundant 3d-metals or even main group metals. Although not as efficient as noble transition metals, metallic barium was recently found to be a versatile hydrogenation catalyst. Here we show that addition of finely divided Fe0, which itself is a poor hydrogenation catalyst, boosts activities of Ba0 by several orders of magnitude, enabling rapid hydrogenation of alkynes, imines, challenging multi-substituted alkenes and non-activated arenes. Metallic Fe0 also boosts the activity of soluble early main group metal hydride catalysts, or precursors thereto. This synergy originates from cooperativity between a homogeneous, highly reactive, polar main group metal hydride complex and a heterogeneous Fe0 surface that is responsible for substrate activation.

Access to a Labile Monomeric Magnesium Radical by Ball-Milling.

In order to isolate a monometallic Mg radical, the precursor (Am)MgI⋅(CAAC) (1) was prepared (Am=tBuC(N-DIPP)2 , DIPP=2,6-diisopropylphenyl, CAAC=cyclic (alkyl)(amino)carbene). Reduction of a solution of 1 in toluene with the reducing agent K/KI led to formation of a deep purple complex that rapidly decomposed. Ball-milling of 1 with K/KI gave the low-valent MgI complex (Am)Mg⋅(CAAC) (2) which after rapid extraction with pentane and crystallization was isolated in 15 % yield. Although a benzene solution of 2 decomposes rapidly to give Mg(Am)2 (3) and unidentified products, the radical is stable in the solid state. Its crystal structure shows planar trigonal coordination at Mg. The extremely short Mg-C distance of 2.056(2) Šindicates strong Mg-CAAC bonding. Calculations and EPR measurements show that most of the spin density is in a π* orbital located at the C-N bond in CAAC, leading to significant C-N bond elongation. This is supported by calculated NPA charges in 2: Mg +1.73, CAAC -0.82. Similar metal-to-CAAC charge transfer was calculated for M0 (CAAC)2 and [MI (CAAC)2 + ] (M=Be, Mg, Ca) complexes in which the metal charges range from +1.50 to +1.70. Although the spin density of the radical is mainly located at the CAAC ligand, complex 2 reacts as a low-valent MgI complex: reaction with a I2 solution in toluene gave (Am)MgI⋅(CAAC) (1) as the major product.

New horizons in low oxidation state group 2 metal chemistry.

Since the seminal report on Mg in the +I oxidation state in 2007, low-valent complexes featuring a MgI-MgI bond developed from trophy molecules to state-of-the-art reducing agents. Despite increasing interest in low-valency of the other group 2 metals, this area was restricted for a long time to a rare example of a CaI(arene)CaI inverse sandwich. This feature article focuses on the most recent developments in the field, highlighting recent breakthroughs for Be, Mg and Ca. The more exotic metal Be was the first to be isolated as a zero-valent complex which could be oxidized to a BeI species. There also has been interest in breaking the MgI-MgI bond with superbulky ß-diketiminate ligands (BDI) that suppress (BDI)Mg-Mg(BDI) bond formation. This led to Mg-Mg bond elongation or Mg-N bond cleavage. Several reports on attempts to isolate (BDI)Mg˙ radicals by combinations of ligand bulk, addition of neutral ligands or UV(vis) irradiation led to reduction of the aromatic solvents, underscoring the high reactivity of these open shell species. Only recently, zero-valent complexes of Mg were introduced. Double reduction of a (BDI)MgI complex with Na gave [(BDI)Mg-]Na+. This Mg0 complex crystallized as a dimer in which the Na+ cations bridge the two (BDI)Mg- anions which react as Mg nucleophiles. Thermal decomposition led to spontaneous formation of Na0 and a trinuclear (BDI)MgMgMg(BDI) complex. This mixed-valence Mg3-complex is a prime example of the fleeting multinuclear Mgn intermediates discussed on the way from Mg metal to Grignard reagent. Attempts to prepare low-valent CaI compounds by reduction of (BDI)CaI led to dearomatization of the arene solvents: (BDI)Ca(arene)Ca(BDI). Reduction in alkanes prevented this decomposition pathway but led to N2 reduction and isolation of (BDI)Ca(N2)Ca(BDI), representing the first example of molecular nitrogen fixation with an early main group metal. As the N22- anion reacts in most cases as a very strong two-electron reductant, LCa(N2)CaL could be seen as a synthon for hitherto elusive CaI-CaI complexes. Theoretical calculations suggest that participation of Ca d-orbitals is relevant for N2 activation. These most recent developments in low-valent group 2 metal chemistry will revive this area and undoubtly lead to new reactivities and applications.

Retro-Diels-Alder decomposition of norbornadiene mediated by a cationic magnesium complex.

First evidence for the coordination of norbornadiene (nbd) and dicyclopentadiene (dcpd) with the main group metal Mg is provided by the crystal structures of adducts with cationic ß-diketiminate (BDI) Mg complexes. While the dcpd complex is thermally stable, [(BDI)Mg+·nbd][B(C6F5)4-] shows slow room temperature retro-Diels-Alder decomposition to give a complex with the cation (BDI)Mg(C5H5)Mg(BDI)+.

Cationic Heterobimetallic Mg(Zn)/Al(Ga) Combinations for Cooperative C-F Bond Cleavage.

Low-valent (Me BDI)Al and (Me BDI)Ga and highly Lewis acidic cations in [(tBu BDI)M+ ⋅C6 H6 ][(B(C6 F5 )4 - ] (M=Mg or Zn, Me BDI=HC[C(Me)N-DIPP]2 , tBu BDI=HC[C(tBu)N-DIPP]2 , DIPP=2,6-diisopropylphenyl) react to heterobimetallic cations [(tBu BDI)Mg-Al(Me BDI)+ ], [(tBu BDI)Mg-Ga(Me BDI)+ ] and [(tBu BDI)Zn-Ga(Me BDI)+ ]. These cations feature long Mg-Al (or Ga) bonds while the Zn-Ga bond is short. The [(tBu BDI)Zn-Al(Me BDI)+ ] cation was not formed. Combined AIM and charge calculations suggest that the metal-metal bonds to Zn are considerably more covalent, whereas those to Mg should be described as weak AlI (or GaI )→Mg2+ donor bonds. Failure to isolate the Zn-Al combination originates from cleavage of the C-F bond in the solvent fluorobenzene to give (tBu BDI)ZnPh and (Me BDI)AlF+ which is extremely Lewis acidic and was not observed, but (Me BDI)Al(F)-(µ-F)-(F)Al(Me BDI)+ was verified by X-ray diffraction. DFT calculations show that the remarkably facile C-F bond cleavage follows a dearomatization/rearomatization route.