Structural-Change-Induced Two-Stage Redox Behavior of Pentacenebisquinodimethane with Tricolor Chromism.

Tricolor electrochromism was realized through the interconversion among the neutral (yellow), dicationic (green), and tetracationic (blue) states, even though only one kind of chromophore is generated upon oxidation. Both dicationic and tetracationic states were isolated as stable salts, and their different colors come from the effective interchromophore interaction only in the tetracationic state but not in the dicationic state. Despite the negligible Coulombic repulsion in the tetracationic state with four cyanine-type chromophores, pentacenebisquinodimethane undergoes stepwise two-stage two-electron oxidation when radical-stabilizing 5-(4-octyloxyphenyl)-2-thienyl groups are attached on the exomethylene bonds. A contribution from the biradical form only in the neutral state but not in the dicationic state is the reason for the observed negative cooperativity during the electrochemical oxidation.

Domino-Redox Reaction Induced by An Electrochemically Triggered Conformational Change.

The concept of a domino-type reaction has been applied in a wide range of fields such as synthetic organic chemistry, material engineering, and life science. To extend the domino concept to redox chemistry, we designed and synthesized a dimeric quinodimethane (QD) with a nonplanar dithiin spacer. The domino-redox properties can be activated by raising the temperature, based on a thermally equilibrated twisted conformation of QD, which has a higher HOMO level that is more readily oxidized. After one QD unit is oxidized (trigger), steric repulsion and electronic interaction between electrophores make the neighboring QD unit adopt a twisted conformation (domino process), which facilitates the following oxidation. Thus, a domino-redox reaction was achieved for the first time by a change in the HOMO level due to a drastic change in the molecular conformation.

Carbon-based Biradicals: Structural and Magnetic Switching.

Sterically hindered C═C double bonds often deform into a bent or twisted geometry. Thus, many overcrowded ethylenes or anthraquinodimethanes can adopt multiple conformations, such as a folded form or a twisted form, which are interconvertible under the application of external stimuli. A perpendicular form with biradical character can also be adopted when designed to incorporate a stable carbon-based radical unit, which is involved in stimuli-responsive magnetic switching accompanied by a structural change. This review focuses on recent advances in the development of such strained π-electron systems and reveals the factors that affect the mutual interconversion and switching behavior. The energy barrier for the interconversion of conformational isomers is affected by the tricyclic skeleton or bulky substituents on the C═C double bonds, whereas the relative stability of the perpendicular biradical form increases with the additional insertion of 9,10-anthrylene units into the C═C double bonds.

One-Pot Synthesis of Helical Azaheptalene and Chiroptical Switching of an Isolable Radical Cation.

A nitrogen-centered heptalene, azaheptalene, was designed as a representative of a new class of redox-responsive molecules with a large steric strain that originates from the adjacent seven-membered rings. The pentabenzo derivative of azaheptalene was efficiently synthesized by a palladium-catalyzed one-pot reaction of commercially available reagents. Bromination led to mono- and dibrominated derivatives, the latter of which is interconvertible with isolable radical cation species exhibiting near-infrared absorption. Since the azaheptalene skeleton shows configurationally stable helicity with a large torsion angle, enantiomers could be successfully separated. Thus, optically pure azaheptalenes with P- or M-helicity showed strong chiroptical properties (|gabs |≥0.01), which could be changed by an electric potential.

Double Dynamic Structural Change Enabling Tricolor Chromism by the Realization of Apparent Two-Electron Transfer to Skip the Open-Shell State.

Most redox systems generally cannot avoid the involvement of open-shell species upon generating multiply charged species, which often reduces reversibility in multi-color electrochromic systems. In this study, we newly synthesized octakis(aminophenyl)-substituted pentacenebisquinodimethane (BQD) derivatives and their hybrids with alkoxyphenyl analogues. Thanks to apparent two-electron transfer accompanied by double dramatic changes in the structure of the arylated quinodimethane skeleton, the dicationic and tetracationic states were generated and isolated quantitatively because of the negligible steady-state concentration of intermediary open-shell species such as monocation or trication radicals. When two electrophores with different donating abilities are attached to the BQD skeleton, a dicationic state with a different color can be isolated in addition to the neutral and tetracationic states. For these tetracations, an interchromophore interaction induces a red-shift of the NIR absorptions, thus realizing tricolor UV/Vis/NIR electrochromic behavior involving only closed-shell states.

Enhancement of NIR-Absorbing Ability of Bis(diarylmethylium)-Type Dicationic Dyes Based on an Ortho-Substitution Strategy.

Electrochromic systems capable of switching near-infrared (NIR) absorption are fascinating from the viewpoint of applications in the materials and life sciences. Although 11,11,12,12-tetraaryl-9,10-anthraquinodimethanes (AQDs) with a folded form undergo one-stage two-electron oxidation to produce twisted dicationic dyes exhibiting NIR absorption, there is a need to establish a design strategy that can enhance the NIR-absorbing abilities of the corresponding dicationic dyes. In this study, we designed and synthesized a series of AQD derivatives with various substituents introduced at the ortho-position(s) of the 4-methoxyphenyl group. X-ray and spectroscopic analyses revealed that NIR-absorbing properties can be changed by introduction of the ortho-substituents. Thus, control of the steric and electronic effects of the ortho-substituents on the 4-methoxyphenyl groups was demonstrated to be an effective strategy for fine-tuning of the HOMO and LUMO levels for neutral AQDs and twisted dications, respectively, resulting in the modification of electrochemical and spectroscopic properties under an "ortho-substitution strategy".

Geometrical and Electronic Structure of Cation Radical Species of Tetraarylanthraquinodimethane: An Intermediate for Unique Electrochromic Behavior.

Two tetraarylanthraquinodimethane (Ar4 AQD) derivatives having two different aryl groups (aminophenyl and methoxyphenyl) were prepared by sequential dibromomethylation and Suzuki-coupling reactions. X-ray analyses showed that they adopt a folded structure in the neutral state whereas the corresponding dications have a planar anthracene ring, to which diarylmethylium units are perpendicularly attached. Different from Ar4 AQD having the same substituents that undergoes facile two-electron transfer during interconversion with the dicationic state, the intermediary cation radical becomes long-lived in the newly prepared unsymmetric derivatives. The geometric and electronic structures of the open-shell intermediates were elucidated through electrochemical and theoretical investigation, with revealing that the cation radicals adopt the twisted geometry like dications. Upon electrolyses of the dications, the twisted cation radicals were involved in the electrochromism whereas their steady-state concentration is negligible in the oxidation process, thus realizing unique tricolor electrochromic behavior with a hysteretic pattern of color change (colorless -> purple -> blue -> colorless).

A Ratiometric Photoacoustic Probe with a Reversible Response to Hydrogen Sulfide and Hydroxyl Radicals for Dynamic Imaging of Liver Inflammation.

Reversible imaging probes that allow for the dynamic visualization of the redox cycle between hydroxyl radical (⋅OH) and hydrogen sulfide (H2 S) are vital to probe the redox imbalance-involved pathological process in vivo. Herein, we report a reversible ratiometric photoacoustic (PA) imaging nanoprobe (1-PAIN) for the real-time imaging of ⋅OH/H2 S redox cycle in vivo. 1-PAIN displays a low PA ratio between 690 and 825 nm (PA690 /PA825 ), which significantly increases by ≈5-fold upon oxidation by ⋅OH, and is switched back to the initially low PA690 /PA825 value upon reduction by H2 S. 1-PAIN could dynamically report on the hepatic ⋅OH production in mice during the lipopolysaccharide (LPS)-induced liver inflammation process, and visualize hepatic H2 S generation during the N-acetyl cysteine (NAC)-induced anti-inflammation process. 1-PAIN can act as a useful tool to probe the redox state in living biology, beneficial for the study of redox imbalance-related diseases.

Redox-Active Hydrocarbons: Isolation and Structural Determination of Cationic States toward Advanced Response Systems.

Invited for this month's cover is the group of Prof. Yusuke Ishigaki at Hokkaido University, Japan. The cover picture shows a cyclic voltammogram drawn in the style of an ink painting, along with the structures of cationic species composed of pure hydrocarbons. The sunrise, a metaphor for X-rays irradiated on cations, is reminiscent of the dawn of redox chemistry of hydrocarbons. Elucidation of their redox properties should provide important insights into the development of organic electronic devices. The cover was designed by YAP Co., Ltd. More information can be found in the Review by T. Harimoto and Y. Ishigaki.

Redox-Active Hydrocarbons: Isolation and Structural Determination of Cationic States toward Advanced Response Systems.

Organic chemistry has developed rapidly as a carbon-based science. Particularly, hydrocarbons with aromatic rings have attracted much attention as molecular materials for use in organic electronics. In principle, aromatic species can be constructed if carbon and hydrogen atoms are available. Therefore, revealing the nature of pure hydrocarbons with an (anti)aromatic nature should pave the way for the development of as yet unexplored organic materials. In this Review, we focus on pure hydrocarbons composed of only carbon and hydrogen atoms, and present recent studies on their intrinsic electrochemical and spectroscopic properties and structural characterization of their cationic states. We also address more sophisticated hydrocarbon-based response systems that are capable of modulating their properties in response to external stimuli such as light, heat, and electric potential.

An Activatable Afterglow/MRI Bimodal Nanoprobe with Fast Response to H2 S for In Vivo Imaging of Acute Hepatitis.

Accurate detection of hepatic hydrogen sulfide (H2 S) to monitor H2 S-related enzymes' activity is critical for acute hepatitis diagnosis, but remains a challenge due to the dynamic and transient nature of H2 S. Here, we report a H2 S-activatable near-infrared afterglow/MRI bimodal probe F1-GdNP, which shows an "always-on" MRI signal and "off-on" afterglow signal toward H2 S. F1-GdNP shows fast response, high sensitivity and specificity toward H2 S, permitting afterglow imaging of H2 S and evaluation of cystathionine γ-lyase (CSE)'s activity in living mice. We further employ the high spatial-resolution MRI signal of F1-GdNP to track its delivery and accumulation in liver. Importantly, F1-GdNP offers a high signal-to-background ratio (SBR=86.2±12.0) to sensitively report on the increased hepatic H2 S level in the acute hepatitis mice via afterglow imaging, which correlated well with the upregulated CSE activity in the liver, showcasing the good potential of F1-GdNP for monitoring of acute hepatitis process in vivo.

Generation of hydroxyl radical-activatable ratiometric near-infrared bimodal probes for early monitoring of tumor response to therapy.

Tumor response to radiotherapy or ferroptosis is closely related to hydroxyl radical (•OH) production. Noninvasive imaging of •OH fluctuation in tumors can allow early monitoring of response to therapy, but is challenging. Here, we report the optimization of a diene electrochromic material (1-Br-Et) as a •OH-responsive chromophore, and use it to develop a near-infrared ratiometric fluorescent and photoacoustic (FL/PA) bimodal probe for in vivo imaging of •OH. The probe displays a large FL ratio between 780 and 1113 nm (FL780/FL1113), but a small PA ratio between 755 and 905 nm (PA755/PA905). Oxidation of 1-Br-Et by •OH decreases the FL780/FL1113 while concurrently increasing the PA755/PA905, allowing the reliable monitoring of •OH production in tumors undergoing erastin-induced ferroptosis or radiotherapy.

Redox-active tetraaryldibenzoquinodimethanes.

Quinodimethanes (QDs) are a class of non-aromatic π-conjugated compounds that are well-known to be interconvertible scaffolds in many response systems. While parent ortho- and para-QDs (o-QD and p-QD) can be easily converted to benzocyclobutenes or oligomers/polymers by the formation of C-C bonds at α-positions, the attachment of four phenyl groups to these reactive sites makes o-Ph4QD and p-Ph4QD long-lived. We have demonstrated that further dibenzo-annulation of such tetraaryl QD units also drastically increases their stability, and many tetraarylated dibenzoquinodimethane derivatives have been developed. This Feature Article shows our milestones in creating functional redox systems, where drastic changes in structure occur upon electron transfer (dynamic redox "dyrex" behaviour).

Hysteretic Three-State Redox Interconversion among Zigzag Bisquinodimethanes with Non-fused Benzene Rings and Twisted Tetra-/Dications with [5]/[3]Acenes Exhibiting Near-Infrared Absorptions.

Octaaryl-substituted bisquinodimethanes (BQDs) with a zigzag structure were designed as redox-switchable molecules that undergo four-electron oxidation to produce tetracationic pentacenes with a doubly twisted structure. In contrast to one-stage four-electron oxidation of BQDs, stepwise two-electron reduction of tetracationic pentacenes occurs to give dicationic anthracenes and then the original BQDs, step-by-step. Since both tetracations and dications exhibit near-infrared (NIR) absorptions (-1400 nm) based on an intramolecular charge-transfer interaction, changes in not only their structures but also their UV-vis-NIR spectra can be controlled by redox stimuli. In this Communication, we present an unprecedented one-step π-extension to pentacene from non-fused benzene rings by oxidation, and subsequent two-stage deannulation to benzene rings via anthracene upon reduction. All structures were determined by single-crystal X-ray analyses, and their properties were characterized by spectroscopic and theoretical studies.

Hexaarylbutadiene: A Versatile Scaffold with Tunable Redox Properties towards Organic Near-Infrared Electrochromic Material.

When the 1,1,4,4-tetraanilinobutadiene skeleton is attached with two halogenated aryl units at the 2,3-positions, they undergo facile two-electron oxidation to give stable dicationic dyes which exhibit a near-infrared (NIR) absorption whereas the neutral dienes show only pale color. Therefore, a distinct electrochromic response with an absorption change in the NIR region is achieved, which is attracting considerable recent attention from the viewpoint of bioimaging. Herein, we demonstrate that the redox potentials of the 1,1,4,4-tetraanilinobutadiene can be precisely controlled by the donating properties of the amino group on the aniline unit as well as the number of halogen atoms on the aryl units at 2,3-positions on the butadiene. In contrast, the NIR absorption bands mainly depend on the number of halogen atoms irrespective to the donating properties of aniline unit. Thus, the hexaarylbutadiene skeleton is proven to be a versatile scaffold to develop less-explored organic NIR electrochromic materials, whose redox and spectroscopic properties can be finely tuned by modifying/attaching the proper substituents.

H2S-activatable near-infrared afterglow luminescent probes for sensitive molecular imaging in vivo.

Afterglow luminescent probes with high signal-to-background ratio show promise for in vivo imaging; however, such probes that can be selectively delivered into target sites and switch on afterglow luminescence remain limited. We optimize an organic electrochromic material and integrate it into near-infrared (NIR) photosensitizer (silicon 2,3-naphthalocyanine bis(trihexylsilyloxide) and (poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) containing nanoparticles, developing an H2S-activatable NIR afterglow probe (F12+-ANP). F12+-ANP displays a fast reaction rate (1563 ± 141 M-1 s-1) and large afterglow turn-on ratio (~122-fold) toward H2S, enabling high-sensitivity and -specificity measurement of H2S concentration in bloods from healthy persons, hepatic or colorectal cancer patients. We further construct a hepatic-tumor-targeting and H2S-activatable afterglow probe (F12+-ANP-Gal) for noninvasive, real-time imaging of tiny subcutaneous HepG2 tumors (<3 mm in diameter) and orthotopic liver tumors in mice. Strikingly, F12+-ANP-Gal accurately delineates tumor margins in excised hepatic cancer specimens, which may facilitate intraoperative guidance of hepatic cancer surgery.

Influence of permittivity and electrical conductivity on image pattern of MRI.

In proton density-weighted (PDW) MR imaging, the patterns of signal intensity vary depending on the imaged material, and change with the flip angle (FA) applied to the imaged material. The correlation between the pre-determined FA and the actual FA applied to imaged objects was investigated using 4 types of phantoms having different dielectric properties. PDW images were acquired using the spin-echo (SE) method and different pre-determined FA. Dependency of the signal intensity distribution in the phantom on the pre-determined FA differed among phantoms: patterns for water and 0.402 w/w% saline solution phantoms changed with the pre-determined FA, whereas those for olive oil and 4.02 w/w% saline solution phantoms were barely affected by the pre-determined FA. Causes of these phenomena were considered to be the differences between the pre-determined FA and the actual FA among the phantoms; differences were also influenced by the positioning of the phantom. Our study showed that the actual FA in the phantom is greater than the pre-determined FA in high permittivity media, whereas it is reduced by an increased conductivity of the media.

Development of MRI phantom equivalent to human tissues for 3.0-T MRI.

PURPOSE: A 3.0-T MRI phantom (called the CAGN-3.0T phantom) having human-equivalent relaxation times and human-equivalent conductivity was developed. METHODS: The ingredients of the phantom are carrageenan (as a gelatinizer), agarose (as a T2-relaxation modifier), GdCl3 (as a T1-relaxation modifier), NaCl (as a conductivity modifier), and NaN3 (as an antiseptic). Numerous samples with varying concentrations of agarose, GdCl3, and NaCl were prepared, and T1 and T2 values were measured using 3.0-T MRI. RESULTS: The T1 values of the CAGN-3.0T phantom were unaffected by NaCl, while the T2 values were only slightly affected. Based on the measured data, empirical formulae were devised to express the relationships between the concentrations of agarose, GdCl3, and NaCl and the relaxation times. The formula for expressing the conductivity of the CAGN-3.0T phantom was obtained. CONCLUSIONS: By adjustments to the concentrations of agarose, GdCl3, and NaCl, the relaxation times and conductivity of almost all types of human tissues can be simulated by CAGN-3.0T phantoms. The phantoms have T1 values of 395-2601 ms, T2 values of 29-334 ms, and conductivity of 0.27-1.26 S/m when concentrations of agarose, GdCl3, and NaCl are varied from 0 to 2.0 w/w%, 0 to 180 µmol/kg, and 0 to 0.7 w/w%, respectively. The CAGN-3.0T phantom has sufficient strength to replicate the torso without using reinforcing agents, and can be cut with a knife into any shape.

Visualization of stent lumen in MR imaging: relationship with stent design and RF direction.

Magnetic resonance imaging (MRI) visualization of metallic stent lumens is possible if the stent structure counteracts eddy currents in the lumen induced by the radio frequency magnetic field, B(1). To examine the effectiveness of various stent designs in counteracting eddy currents, we anchored eight copper stent models and 2 commercially available nickel-titanium alloy (Nitinol) stents in a gel phantom, perpendicular or parallel to the direction of B(1). A mesh stent lumen showed hypointensity irrespective of its alignment relative to B(1). A solenoid stent lumen showed hypointensity with the stent axis parallel to B(1), but it had the same signal intensity as outside the lumen when perpendicular to B(1). A Moebius stent lumen showed no signal reduction, irrespective of alignment relative to B(1). Lumens of the commercially available stents showed hypointensity regardless of alignment relative to B(1). Computer simulation revealed that the signal intensities of the stents corresponded to magnetic flux densities of B(1) in the stents, which are modified by the structure of the stent. While in vivo MRI viewing of a Moebius stent lumen is likely possible regardless of axis alignment, inherent structural weakness may be problematic. As a more practical choice, the solenoid stent is easier to manufacture and generates no hypointensive signal when the axis is parallel to B(0).

Development of a human-tissue-like phantom for 3.0-T MRI.

PURPOSE: A 3.0-T MRI phantom having human-tissue-equivalent relaxation times was developed. METHODS: The ingredients of the phantom are carrageenan (for gelatinization), GdCl(3) (as a T(1)-relaxation modifier), agarose (as a T(2)-relaxation modifier), and NaN(3) (as an antiseptic agent). Numerous samples with varying concentrations of GdCl(3) and agarose were prepared, and T(1) and T(2) were measured using 3.0-T MRI. RESULTS: Relaxation times of the phantom samples ranged from 395 to 2601 ms for T(1) values and 29 to 334 ms for T(2) values. Based on the measured results, empirical formulae were devised to express the relationships between the concentrations of relaxation modifiers and relaxation times. CONCLUSIONS: Adjustment of GdCl(3) and agarose concentrations allows arbitrary setting of relaxation times, and the creation of a phantom that can mimic relaxation times of human-tissue. Carrageenan is considered the most suitable as a gelling agent for an MRI phantom, as it permits the relatively easy and inexpensive production of a large phantom such as for the human torso, and which can be easily shaped with a knife.