A Facile Molecular Approach to Amorphous Nickel Pnictides and Their Reconstruction to Crystalline Potassium-Intercalated γ-NiOOHx Enabling High-Performance Electrocatalytic Water Oxidation and Selective Oxidation of 5-Hydroxymethylfurfural.

The low-temperature molecular precursor approach can be beneficial to conventional solid-state methods, which require high temperatures and lead to relatively large crystalline particles. Herein, a novel, single-step, room-temperature preparation of amorphous nickel pnictide (NiE; EP, As) nanomaterials is reported, starting from NaOCE(dioxane)n and NiBr2 (thf)1.5 . During application for the oxygen evolution reaction (OER), the pnictide anions leach, and both materials fully reconstruct into nickel(III/IV) oxide phases (similar to γ-NiOOH) comprising edge-sharing (NiO6 ) layers with intercalated potassium ions and a d-spacing of 7.27 Å. Remarkably, the intercalated γ-NiOOHx phases are nanocrystalline, unlike the amorphous nickel pnictide precatalysts. This unconventional reconstruction is fast and complete, which is ascribed to the amorphous nature of the nanostructured NiE precatalysts. The obtained γ-NiOOHx can effectively catalyse the OER for 100 h at a high current density (400 mA cm-2 ) and achieves outstandingly high current densities (>600 mA cm-2 ) for the selective, value-added oxidation of 5-hydroxymethylfurfural (HMF). The NiP-derived γ-NiOOHx shows a higher activity for both processes due to more available active sites. It is anticipated that the herein developed, effective, room-temperature molecular synthesis of amorphous nickel pnictide nanomaterials can be applied to other functional transition-metal pnictides.

Combination of Highly Efficient Electrocatalytic Water Oxidation with Selective Oxygenation of Organic Substrates using Manganese Borophosphates.

One of the key catalytic reactions for life on earth, the oxidation of water to molecular oxygen, occurs in the oxygen-evolving complex of the photosystem II (PSII) mediated by a manganese-containing cluster. Considerable efforts in this research area embrace the development of efficient artificial manganese-based catalysts for the oxygen evolution reaction (OER). Using artificial OER catalysts for selective oxygenation of organic substrates to produce value-added chemicals is a worthwhile objective. However, unsatisfying catalytic performance and poor stability have been a fundamental bottleneck in the field of artificial PSII analogs. Herein, for the first time, a manganese-based anode material is developed and paired up for combining electrocatalytic water oxidation and selective oxygenations of organics delivering the highest efficiency reported to date. This can be achieved by employing helical manganese borophosphates, representing a new class of materials. The uniquely high catalytic activity and durability (over 5 months) of the latter precursors in alkaline media are attributed to its unexpected surface transformation into an amorphous MnOx phase with a birnessite-like short-range order and surface-stabilized MnIII sites under extended electrical bias, as unequivocally demonstrated by a combination of in situ Raman and quasi in situ X-ray absorption spectroscopy as well as ex situ methods.

Boosting Water Oxidation through In Situ Electroconversion of Manganese Gallide: An Intermetallic Precursor Approach.

For the first time, the manganese gallide (MnGa4 ) served as an intermetallic precursor, which upon in situ electroconversion in alkaline media produced high-performance and long-term-stable MnOx -based electrocatalysts for water oxidation. Unexpectedly, its electrocorrosion (with the concomitant loss of Ga) leads simultaneously to three crystalline types of MnOx minerals with distinct structures and induced defects: birnessite δ-MnO2 , feitknechtite ß-MnOOH, and hausmannite α-Mn3 O4 . The abundance and intrinsic stabilization of MnIII /MnIV active sites in the three MnOx phases explains the superior efficiency and durability of the system for electrocatalytic water oxidation. After electrophoretic deposition of the MnGa4 precursor on conductive nickel foam (NF), a low overpotential of 291 mV, comparable to that of precious-metal-based catalysts, could be achieved at a current density of 10 mA cm-2 with a durability of more than five days.

Boosting Electrocatalytic Hydrogen Evolution Activity with a NiPt3@NiS Heteronanostructure Evolved from a Molecular Nickel-Platinum Precursor.

A facile synthetic route to NiPt3@NiS heteronanostructures is reported, starting from a subsulfido bridged heterobimetallic nickel-platinum molecular precursor. Notably, the NiPt3@NiS on nickel foam displayed merely an overpotential of 12 mV at -10 mA cm-2, which is substantially lower than that of Pt or NiS, synthesized through a similar approach and represents the most active hydrogen evolution reaction (HER) electrocatalysts yet reported in alkaline solutions. NiPt3@NiS electrodes demonstrated an unceasing HER stability over 8 days, which is well over those reported for Pt-based catalysts signifying a capability of scaled hydrogen production.

Evolution of Superconductivity with Sr-Deficiency in Antiperovskite Oxide Sr3-xSnO.

Bulk superconductivity was recently reported in the antiperovskite oxide Sr3-xSnO, with a possibility of hosting topological superconductivity. We investigated the evolution of superconducting properties such as the transition temperature Tc and the size of the diamagnetic signal, as well as normal-state electronic and crystalline properties, with varying the nominal Sr deficiency x0. Polycrystalline Sr3-xSnO was obtained up to x0 = 0:6 with a small amount of SrO impurities. The amount of impurities increases for x0 > 0.6, suggesting phase instability for high deficiency. Mössbauer spectroscopy reveals an unusual Sn4- ionic state in both stoichiometric and deficient samples. By objectively analyzing superconducting diamagnetism data obtained from a large number of samples, we conclude that the optimal x0 lies in the range 0.5 < x0 < 0.6. In all superconducting samples, two superconducting phases appear concurrently that originate from Sr3-xSnO but with varying intensities. These results clarify the Sr deficiency dependence of the normal and superconducting properties of the antiperovskite oxide Sr3-xSnO will ignite future work on this class of materials.

Superconductivity in the antiperovskite Dirac-metal oxide Sr3-xSnO.

Investigations of perovskite oxides triggered by the discovery of high-temperature and unconventional superconductors have had crucial roles in stimulating and guiding the development of modern condensed-matter physics. Antiperovskite oxides are charge-inverted counterpart materials to perovskite oxides, with unusual negative ionic states of a constituent metal. No superconductivity was reported among the antiperovskite oxides so far. Here we present the first superconducting antiperovskite oxide Sr3-xSnO with the transition temperature of around 5 K. Sr3SnO possesses Dirac points in its electronic structure, and we propose from theoretical analysis a possibility of a topological odd-parity superconductivity analogous to the superfluid 3He-B in moderately hole-doped Sr3-xSnO. We envision that this discovery of a new class of oxide superconductors will lead to a rapid progress in physics and chemistry of antiperovskite oxides consisting of unusual metallic anions.