Preclinical Characterization of AZD9574, a Blood-Brain Barrier Penetrant Inhibitor of PARP1.

PURPOSE: We evaluated the properties and activity of AZD9574, a blood-brain barrier (BBB) penetrant selective inhibitor of PARP1, and assessed its efficacy and safety alone and in combination with temozolomide (TMZ) in preclinical models. EXPERIMENTAL DESIGN: AZD9574 was interrogated in vitro for selectivity, PARylation inhibition, PARP-DNA trapping, the ability to cross the BBB, and the potential to inhibit cancer cell proliferation. In vivo efficacy was determined using subcutaneous as well as intracranial mouse xenograft models. Mouse, rat, and monkey were used to assess AZD9574 BBB penetration and rat models were used to evaluate potential hematotoxicity for AZD9574 monotherapy and the TMZ combination. RESULTS: AZD9574 demonstrated PARP1-selectivity in fluorescence anisotropy, PARylation, and PARP-DNA trapping assays and in vivo experiments demonstrated BBB penetration. AZD9574 showed potent single agent efficacy in preclinical models with homologous recombination repair deficiency in vitro and in vivo. In an O6-methylguanine-DNA methyltransferase (MGMT)-methylated orthotopic glioma model, AZD9574 in combination with TMZ was superior in extending the survival of tumor-bearing mice compared with TMZ alone. CONCLUSIONS: The combination of three key features-PARP1 selectivity, PARP1 trapping profile, and high central nervous system penetration in a single molecule-supports the development of AZD9574 as the best-in-class PARP inhibitor for the treatment of primary and secondary brain tumors. As documented by in vitro and in vivo studies, AZD9574 shows robust anticancer efficacy as a single agent as well as in combination with TMZ. AZD9574 is currently in a phase I trial (NCT05417594). See related commentary by Lynce and Lin, p. 1217.

Preclinical Characterization of AZD5305, A Next-Generation, Highly Selective PARP1 Inhibitor and Trapper.

PURPOSE: We hypothesized that inhibition and trapping of PARP1 alone would be sufficient to achieve antitumor activity. In particular, we aimed to achieve selectivity over PARP2, which has been shown to play a role in the survival of hematopoietic/stem progenitor cells in animal models. We developed AZD5305 with the aim of achieving improved clinical efficacy and wider therapeutic window. This next-generation PARP inhibitor (PARPi) could provide a paradigm shift in clinical outcomes achieved by first-generation PARPi, particularly in combination. EXPERIMENTAL DESIGN: AZD5305 was tested in vitro for PARylation inhibition, PARP-DNA trapping, and antiproliferative abilities. In vivo efficacy was determined in mouse xenograft and PDX models. The potential for hematologic toxicity was evaluated in rat models, as monotherapy and combination. RESULTS: AZD5305 is a highly potent and selective inhibitor of PARP1 with 500-fold selectivity for PARP1 over PARP2. AZD5305 inhibits growth in cells with deficiencies in DNA repair, with minimal/no effects in other cells. Unlike first-generation PARPi, AZD5305 has minimal effects on hematologic parameters in a rat pre-clinical model at predicted clinically efficacious exposures. Animal models treated with AZD5305 at doses ≥0.1 mg/kg once daily achieved greater depth of tumor regression compared to olaparib 100 mg/kg once daily, and longer duration of response. CONCLUSIONS: AZD5305 potently and selectively inhibits PARP1 resulting in excellent antiproliferative activity and unprecedented selectivity for DNA repair deficient versus proficient cells. These data confirm the hypothesis that targeting only PARP1 can retain the therapeutic benefit of nonselective PARPi, while reducing potential for hematotoxicity. AZD5305 is currently in phase I trials (NCT04644068).

Effects of mineral oil administration on the pharmacokinetics, metabolism and pharmacodynamics of atorvastatin and pravastatin in mice and dogs.

We investigated the effects of mineral oil on statin pharmacokinetics and inflammatory markers in animal models. A new synthesis strategy produced regioisomers that facilitated the characterization of the main metabolite (M1) of atorvastatin, a lipophilic statin, in C57BL/6NCrl mice. The chemical structure of M1 in mice was confirmed as ortho-hydroxy ß-oxidized atorvastatin. Atorvastatin and M1 pharmacokinetics and inflammatory markers were assessed in C57BL6/J mice given atorvastatin 5 mg/kg/day or 10 mg/kg/day, as a single dose or for 21 days, with or without 10 µL or 30 µL mineral oil. No consistent differences in plasma exposure of atorvastatin or M1 were observed in mice after single or repeat dosing of atorvastatin with or without mineral oil. However, mice administered atorvastatin 10 mg/kg with 30 µL mineral oil for 21 days had significantly increased plasma levels of serum amyloid A (mean 9.6 µg/mL vs 7.9 µg/mL without mineral oil; p < 0.01) and significantly increased proportions of C62Lhigh B cells (mean 18% vs 12% without mineral oil; p = 0.04). There were no statistically significant differences for other inflammatory markers assessed. In dogs, pharmacokinetics of atorvastatin, its two hydroxy metabolites and pravastatin (a hydrophilic statin) were evaluated after single administration of atorvastatin 10 mg plus pravastatin 40 mg with or without 2 g mineral oil. Pharmacokinetics of atorvastatin, hydroxylated atorvastatin metabolites or pravastatin were not significantly different after single dosing with or without mineral oil in dogs. Collectively, the results in mice and dogs indicate that mineral oil does not affect atorvastatin or pravastatin pharmacokinetics, but could cause low-grade inflammation with chronic oral administration, which warrants further investigation.

The effectiveness of quality control samples in pharmaceutical bioanalysis.

The use of quality control (QC) samples in bioanalysis is well established and consistent with regulatory guidance. However, a systematic evaluation of whether QC samples serve the intended purpose of improving data quality has not been undertaken. The Translational and ADME Sciences Leadership Group (TALG) of the International Consortium for Innovation and Quality in Pharmaceutical Development (IQ) conducted an evaluation to assess whether closer agreement is observed when comparing pharmacokinetic data from two passed runs, than when comparing data from failed and passed (retest) runs. Analysis of data collected across organizations, molecular types and analytical platforms, revealed that bioanalytical methods are very reproducible; and that QC samples improve the overall quality of pharmacokinetic concentration data and justifies their continued use.

Overcoming analytical challenges to generate data critical to understanding lipid nanoparticle-delivered modified mRNA biodistribution.

Aim: Chemically modified mRNA offers a novel approach to treat disease. Due to susceptibility to extracellular nucleases in vivo, dosed modified mRNA therapeutics can benefit from encapsulation within novel delivery systems, such as lipid nanoparticles (LNPs). To understand the holistic effect of dosing LNP-encapsulated modified mRNA therapeutics can require bioanalysis of several components including the mRNA, protein and LNP. Methodology: These components can require bespoke preanalytical strategies to preserve analyte integrity to achieve successful analysis. Here we describe the sample collection, processing steps and bioanalytical technologies that can be used to overcome these challenges. Discussion: Understanding the biodistribution and holistic effects of the different components allow the pharmaceutical industry to evaluate safety and efficacy of modified mRNA therapeutics.

Feedback from the European Bioanalysis Forum liquid microsampling consortium: capillary liquid microsampling and assessment of homogeneity of the resultant samples.

Following the completion of a detailed experimental protocol into the potential inhomogeneity of capillary liquid microsamples, which was performed at seven European Bioanalysis Forum member companies, the summary and conclusion on the data are reported here. It has been demonstrated that it is possible to generate homogeneous samples using these microsampling techniques; that the resultant microsamples can be accurate and precise and that capillary liquid microsampling data can be consistent with conventional larger volume plasma samples. However, the data contain some variability which is contributed to by the different range of experiences that each investigating site had with these techniques. Therefore, knowledge of the compounds, well-designed experiments and experience with these techniques are essential for the delivery of high quality data.

Feedback from the European Bioanalysis Forum liquid microsampling consortium: microsampling: assessing accuracy and precision of handheld pipettes and capillaries.

Aim: Microsampling in preclinical pharmacokinetics (PK) studies is currently widely adopted across the pharmaceutical industry. Materials & methods: The European Bioanalysis Forum liquid microsampling consortium member companies assessed the accuracy and precision of handheld pipettes and microcapillaries at volumes of less than 10 µl. The following key factors on pipetting performance were also evaluated: Pipette type (positive displacement, air displacement and microcapillary), experience of user and the liquid type. Water was selected as a best-case scenario for accuracy and precision determination and blood plasma as a 'real world' bioanalysis sample type. Conclusion: Accuracy and precision on the pipetted volume decreased at lower volumes and experienced laboratory technicians performed better compared with the infrequent users. With respect to the pipetting devices used, microcapillaries showed better or equivalent accuracy and precision compared with handheld pipettes across the volume range 1-8 µl independent of the matrix used.

Validation of an ultrasensitive LC-MS/MS method for PTH 1-34 in porcine plasma to support a solid dose PK study.

BACKGROUND: The bioanalysis of Teriparatide (PTH 1-34) is extremely challenging due to the low plasma concentrations present at a therapeutic level. An LC-MS/MS-based method was developed that detected PTH 1-34 at 15 pg/ml in porcine plasma, and was validated using the bioanalytical method validation guidelines. RESULTS: The analytical methodology demonstrated good linearity over a range of 15-1000 pg/ml, and demonstrated good precision and accuracy. The validated method was used to support a trial comparing a solid state dose to a solution-based injection (Forteo™). CONCLUSION: The ability to quantify the peptide at low pg/ml in porcine plasma demonstrates that it is possible to develop very sensitive LC-MS/MS-based methodologies to support the bioanalysis of large peptide biotherapeutics.