RF Sputtered Nb-Doped MoS2 Thin Film for Effective Detection of NO2 Gas Molecules: Theoretical and Experimental Studies.

Doping plays a significant role in affecting the physical and chemical properties of two-dimensional (2D) dichalcogenide materials. Controllable doping is one of the major factors in the modification of the electronic and mechanical properties of 2D materials. MoS2 2D materials have gained significant attention in gas sensing owing to their high surface-to-volume ratio. However, low response and recovery time hinder their application in practical gas sensors. Herein, we report the enhanced gas response and recovery of Nb-doped MoS2 gas sensor synthesized through physical vapor deposition (PVD) toward NO2 at different temperatures. The electronic states of MoS2 and Nb-doped MOS2 monolayers grown by PVD were analyzed based on their work functions. Doping with Nb increases the work function of MoS2 and its electronic properties. The Nb-doped MoS2 showed an ultrafast response and recovery time of t rec = 30/85 s toward 5 ppm of NO2 at their optimal operating temperature (100 °C). The experimental results complement the electron difference density functional theory calculation, showing both physisorption and chemisorption of NO2 gas molecules on niobium substitution doping in MoS2.

Growth of large-scale MoS2 nanosheets on double layered ZnCo2O4 for real-time in situ H2S monitoring in live cells.

There is an urgent need to develop in situ sensors that monitor the continued release of H2S from biological systems to understand H2S-related pathology and pharmacology. For this purpose, we have developed a molybdenum disulfide supported double-layered zinc cobaltite modified carbon cloth electrode (MoS2-ZnCo2O4-ZnCo2O4) based electrocatalytic sensor. The results of our study suggest that the MoS2-ZnCo2O4-ZnCo2O4 electrode has excellent electrocatalytic ability to oxidize H2S at physiological pH, in a minimized overpotential (+0.20 vs. Ag/AgCl) with an amplified current signal. MoS2 grown on double-layered ZnCo2O4 showed relatively better surface properties and electrochemical properties than MoS2 grown on single-layered ZnCo2O4. The sensor delivered excellent analytical parameters, such as low detection limit (5 nM), wide linear range (10 nM-1000 µM), appreciable stability (94.3%) and high selectivity (2.5-fold). The practicality of the method was tested in several major biological fluids. The electrode monitors the dynamics of bacterial H2S in real-time for up to 5 h with good cell viability. Our research shows that MoS2-ZnCo2O4-ZnCo2O4/carbon cloth is a robust and sensitive electrode to understand how bacteria seek to adjust their defense strategies under exogenously induced stress conditions.

Environmentally Sustainable Synthesis of a CoFe2O4-TiO2/rGO Ternary Photocatalyst: A Highly Efficient and Stable Photocatalyst for High Production of Hydrogen (Solar Fuel).

Herein, a magnetically separable reduced graphene oxide (rGO)-supported CoFe2O4-TiO2 photocatalyst was developed by a simple ultrasound-assisted wet impregnation method for efficient photocatalytic H2 production. Integration of CoFe2O4 with TiO2 induced the formation of Ti3+ sites that remarkably reduced the optical band gap of TiO2 to 2.80 eV from 3.20 eV. Moreover, the addition of rGO improved the charge carrier separation by forming Ti-C bonds. Importantly, the CoFe2O4-TiO2/rGO photocatalyst demonstrated significantly enhanced photocatalytic H2 production compared to that from its individual counterparts such as TiO2 and CoFe2O4-TiO2, respectably. A maximum H2 production rate of 76 559 µmol g-1 h-1 was achieved with a 20 wt % CoFe2O4- and 1 wt % rGO-loaded TiO2 photocatalyst, which was approximately 14-fold enhancement when compared with the bare TiO2. An apparent quantum yield of 12.97% at 400 nm was observed for the CoFe2O4-TiO2/rGO photocatalyst under optimized reaction conditions. This remarkable enhancement can be attributed to synergistically improved charge carrier separation through Ti3+ sites and rGO support, viz., Ti-C bonds. The recyclability of the photocatalyst was ascertained over four consecutive cycles, indicating the stability of the photocatalyst. In addition, it is worth mentioning that the photocatalyst could be easily separated after the reaction using a simple magnet. Thus, we believe that this study may open a new way to prepare low-cost, noble-metal-free magnetic materials with TiO2 for sustainable photocatalytic H2 production.

Correction to "Environmentally Sustainable Synthesis of CoFe2O4-TiO2/rGO Ternary Photocatalyst: A Highly Efficient and Stable Photocatalyst for High Production of Hydrogen (Solar Fuel)".

[This corrects the article DOI: 10.1021/acsomega.8b03221.].

An Approach to Optimize the Thermoelectric Properties of III-V Ternary InGaSb Crystals by Defect Engineering via Point Defects and Microscale Compositional Segregations.

Thermoelectric power generators require semiconductor materials with controlled phonon and free charge carrier transport properties. This could be achieved by changing their molecular and lattice dynamics through introducing/controlling structural imperfections (defects engineering). The structural imperfections such as point defects and compositional segregations in a multicomponent alloy are observed experimentally, and their impact on electron and phonon transport properties was explained. The thermoelectric properties of a III-V ternary alloy InGaSb was improved by the presence of point defects and compositional segregations. The compositions were segregated randomly, and they had a major impact on the phonon contribution to the thermal conductivity. The point defects affected electrical resistivity, and the Seebeck coefficient was influenced by carrier concentration. The figure of merit (ZT) of In0.95Ga0.05Sb is enhanced to 0.62 at 573 K, and it is the highest among any other reported values of binary/ternary III-V semiconductor alloys. The enhancement in the ZT of InGaSb from the viewpoints of point defects and compositional segregations are explained. This experimental defect engineering study could be helpful to understand and improve the thermoelectric properties of many other crystalline materials.

Homogeneous InGaSb crystal grown under microgravity using Chinese recovery satellite SJ-10.

Microgravity crystal growth experiment for the growth of In0.11Ga0.89Sb was performed at the Chinese recoverable satellite through the space program SJ-10. This experiment is aimed to understand the melt formation and growth kinetics of In x Ga1-x Sb solid solution with higher indium composition, because their segregation coefficient was higher than the crystals with lower indium compositions. The target composition and uniformity were achieved with higher growth rate under microgravity, whereas the uniformity in composition was not achieved under normal gravity. The growth and dissolution were affected mainly by the steady state equilibrium in the melt composition because of the convection under normal gravity. The non-steady state equilibrium in the melt composition under microgravity helped to achieve a higher growth rate and compositional homogeneity at higher indium composition of In x Ga1-x Sb solid solution.

Ruthenium based metallopolymer grafted reduced graphene oxide as a new hybrid solar light harvester in polymer solar cells.

A new class of pyridyl benzimdazole based Ru complex decorated polyaniline assembly (PANI-Ru) was covalently grafted onto reduced graphene oxide sheets (rGO) via covalent functionalization approach. The covalent attachment of PANI-Ru with rGO was confirmed from XPS analysis and Raman spectroscopy. The chemical bonding between PANI-Ru and rGO induced the electron transfer from Ru complex to rGO via backbone of the conjugated PANI chain. The resultant hybrid metallopolymer assembly was successfully demonstrated as an electron donor in bulk heterojunction polymer solar cells (PSCs). A PSC device fabricated with rGO/PANI-Ru showed an utmost ~6 fold and 2 fold enhancement in open circuit potential (Voc) and short circuit current density (Jsc) with respect to the standard device made with PANI-Ru (i.e., without rGO) under the illumination of AM 1.5 G. The excellent electronic properties of rGO significantly improved the electron injection from PANI-Ru to PCBM and in turn the overall performance of the PSC device was enhanced. The ultrafast excited state charge separation and electron transfer role of rGO sheet in hybrid metallopolymer was confirmed from ultrafast spectroscopy measurements. This covalent modification of rGO with metallopolymer assembly may open a new strategy for the development of new hybrid nanomaterials for light harvesting applications.

Ni-CeO2 spherical nanostructures for magnetic and electrochemical supercapacitor applications.

The synthesis of nanoparticles has great control over the structural and functional characteristics of materials. In this study, CeO2 and Ni-CeO2 spherical nanoparticles were prepared using a microwave-assisted method. The prepared nanoparticles were characterized via thermogravimetry, X-ray diffraction (XRD), Raman, FTIR, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometry (VSM) and cyclic voltammetry (CV). The pure CeO2 sample exhibited a flake-like morphology, whereas Ni-doped CeO2 showed spherical morphology with uniform shapes. Spherical morphologies for the Ni-doped samples were further confirmed via TEM micrographs. Thermogravimetric analyses revealed that decomposition varies with Ni-doping in CeO2. XRD revealed that the peak shifts towards lower angles for the Ni-doped samples. Furthermore, a diamagnetic to ferromagnetic transition was observed in Ni-doped CeO2. The ferromagnetic property was attributed to the introduction of oxygen vacancies in the CeO2 lattice upon doping with Ni, which were confirmed by Raman and XPS. The pseudo-capacitive properties of pure and Ni-doped CeO2 samples were evaluated via cyclic voltammetry and galvanostatic charge-discharge studies, wherein 1 M KOH was used as the electrolyte. The specific capacitances were 235, 351, 382, 577 and 417 F g-1 corresponding to the pure 1%, 3%, 5% and 7% of Ni doped samples at the current density of 2 A g-1, respectively. The 5% Ni-doped sample showed an excellent cyclic stability and maintained 94% of its maximum specific capacitance after 1000 cycles.

Incorporation of ZnO and their composite nanostructured material into a cotton fabric platform for wearable device applications.

The central idea of this paper is to innovate a new approach for the development of wearable device materials through the coating of cotton fabric with ZnO and Sb-/Ag-/ZnO composites. The study was designed in order to have a clear understanding of the role of ZnO as well as the modified composite thereof under investigation. Cotton fabric with uniform ZnO/ZnO-composite layers on the surface was successfully synthesized via a solvothermal method. The growth behaviors were investigated by comparing ZnO and ZnO-composites. The structural, morphological, chemical states, optical, electrical and thermopower properties of these fabrics were studied. Nanostructured ZnO-composite fabric had enhanced UV shielding with a value of 83.96. It is found that the ZnO-composite fabrics have increased electrical conductivity. The thermopower value of the ZnO-composite fabric could reach 471.9µVK-1. Such materials are anticipated to be worthwhile as wearable electronic devices and as protective textiles.

Investigation of directionally solidified InGaSb ternary alloys from Ga and Sb faces of GaSb(111) under prolonged microgravity at the International Space Station.

InGaSb ternary alloys were grown from GaSb (111)A and B faces (Ga and Sb faces) under microgravity conditions on board the International Space Station by a vertical gradient freezing method. The dissolution process of the Ga and Sb faces of GaSb and orientation-dependent growth properties of InGaSb were analysed. The dissolution of GaSb(111)B was greater than that of (111)A, which was found from the remaining undissolved seed and feed crystals. The higher dissolution of the Sb face was explained based on the number of atoms at that face, and its bonding with the next atomic layer. The growth interface shape was almost flat in both cases. The indium composition in both InGaSb samples was uniform in the radial direction and it gradually decreased along the growth direction because of segregation. The growth rate of InGaSb from GaSb (111)B was found to be higher than that of GaSb (111)A because of the higher dissolution of GaSb (111)B.

Structural and magnetic properties of cobalt-doped iron oxide nanoparticles prepared by solution combustion method for biomedical applications.

Cobalt-doped iron oxide nanoparticles were prepared by solution combustion technique. The structural and magnetic properties of the prepared samples were also investigated. The average crystallite size of cobalt ferrite (CoFe2O4) magnetic nanoparticle was calculated using Scherrer equation, and it was found to be 16±5 nm. The particle size was measured by transmission electron microscope. This value was found to match with the crystallite size calculated by Scherrer equation corresponding to the prominent intensity peak (311) of X-ray diffraction. The high-resolution transmission electron microscope image shows clear lattice fringes and high crystallinity of cobalt ferrite magnetic nanoparticles. The synthesized magnetic nanoparticles exhibited the saturation magnetization value of 47 emu/g and coercivity of 947 Oe. The anti-microbial activity of cobalt ferrite nanoparticles showed better results as an anti-bacterial agent. The affinity constant was determined for the nanoparticles, and the cytotoxicity studies were conducted for the cobalt ferrite nanoparticles at different concentrations and the results are discussed.

Effect of Erbium on the Photocatalytic Activity of TiO2 /Ag Nanocomposites under Visible Light Irradiation.

Erbium co-doped TiO2 /Ag catalysts are synthesized by using a simple, one-step solvothermal method and characterized by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, Raman analysis, X-ray photoelectron spectroscopy, and diffuse reflectance spectroscopy. The catalysts exhibit anatase crystal structures with increased visible light absorption compared with pure TiO2 . Enhanced photocatalytic activity is observed with Er co-doped TiO2 /Ag nanocomposites for Rhodamine B degradation under visible light irradiation. The photocatalytic activity of 1 % Er co-doped TiO2 /Ag is much higher than that of TiO2 /Ag, TiO2 /Er, pure TiO2 , and commercial Degussa P25. The kinetics of the degradation process are studied and the pseudo-first-order rate constant (k) and half-life time (t1/2 ) of the reaction are calculated. The enhanced activity might be accredited to the efficient separation of electron-hole pairs by silver and higher visible light absorption of TiO2 induced by Er.

Growth and optical properties of Cu2ZnSnS4 decorated reduced graphene oxide nanocomposites.

Cu2ZnSnS4 (CZTS) nanoparticles were synthesized by the precursor injection method using oleylamine as a solvent. Preliminary characterization indicated that the synthesized nanoparticles belonged to the kesterite structure with a bulged sphere-like morphology. Reduced graphene oxide (rGO) was synthesized by an improved Hummers method and was used for nanoparticle functionalization. CZTS nanocrystals were decorated on rGO by two different methods. One was oleylamine-based nanoparticle functionalization, and the other was in situ nanoparticle growth. Transmission electron microscopy analysis of CZTS-functionalized rGO showed that the synthesized nanoparticles were uniformly spread on the surface of rGO sheets. Single phase CZTS nanoparticles were grown on rGO without any impurity phase in the in situ growth. Tuned absorption of the pure CZTS was observed by the decoration of CZTS nanoparticles on the surface of rGO in the visible and UV regions.

Synthesis, structural, spectroscopic and optical studies of charge transfer complex salts.

New charge transfer molecular complex adducts of picric acid (C6H3N3O7) with triethylamine (C6H15N) and dimethylformamide (HCON(CH3)2) were synthesized successfully for the first time. Chemical composition and stoichiometry of the synthesized complex salts were verified by CHN elemental analysis. Solubility of the complex salts have been determined by gravimetric method and single crystals of two new salts were grown by low temperature solution growth technique. Crystal system, crystalline nature and cell parameters of the grown crystals were determined by single crystal X-ray diffraction (SXRD) and powder X-ray diffraction (PXRD) analyses. The formations of the charge-transfer complex, functional groups and the modes of vibrations have been confirmed by Fourier transform infrared (FTIR) spectroscopy. In order to know the linear and nonlinear optical suitability for device fabrication, UV-Vis (UV) spectral analysis and relative second harmonic generation (SHG) efficiency test were performed for the grown crystals.