Enhanced Oxygen Evolution and Zinc-Air Battery Performance via Electronic Spin Modulation in Heterostructured Catalysts.

Beyond optimizing electronic energy levels, the modulation of the electronic spin configuration is an effective strategy, often overlooked, to boost activity and selectivity in a range of catalytic reactions, including the oxygen evolution reaction (OER). This electronic spin modulation is frequently accomplished using external magnetic fields, which makes it impractical for real applications. Herein, spin modulation is achieved by engineering Ni/MnFe2O4 heterojunctions, whose surface is reconstructed into NiOOH/MnFeOOH during the OER. NiOOH/MnFeOOH shows a high spin state of Ni, which regulates the OH- and O2 adsorption energy and enables spin alignment of oxygen intermediates. As a result, NiOOH/MnFeOOH electrocatalysts provide excellent OER performance with an overpotential of 261 mV at 10 mA cm-2. Besides, rechargeable zinc-air batteries based on Ni/MnFe2O4 show a high open circuit potential of 1.56 V and excellent stability for more than 1000 cycles. This outstanding performance is rationalized using density functional theory calculations, which show that the optimal spin state of both Ni active sites and oxygen intermediates facilitates spin-selected charge transport, optimizes the reaction kinetics, and decreases the energy barrier to the evolution of oxygen. This study provides valuable insight into spin polarization modulation by heterojunctions enabling the design of next-generation OER catalysts with boosted performance.

Electronic Spin Alignment within Homologous NiS2/NiSe2 Heterostructures to Promote Sulfur Redox Kinetics in Lithium-Sulfur Batteries.

The catalytic activation of the Li-S reaction is fundamental to maximize the capacity and stability of Li-S batteries (LSBs). Current research on Li-S catalysts mainly focuses on optimizing the energy levels to promote adsorption and catalytic conversion, while frequently overlooking the electronic spin state influence on charge transfer and orbital interactions. Here, hollow NiS2/NiSe2 heterostructures encapsulated in a nitrogen-doped carbon matrix (NiS2/NiSe2@NC) are synthesized and used as a catalytic additive in sulfur cathodes. The NiS2/NiSe2 heterostructure promotes the spin splitting of the 3d orbital, driving the Ni3+ transformation from low to high spin. This high spin configuration raises the electronic energy level and activates the electronic state. This accelerates the charge transfer and optimizes the adsorption energy, lowering the reaction energy barrier of the polysulfides conversion. Benefiting from these characteristics, LSBs based on NiS2/NiSe2@NC/S cathodes exhibit high initial capacity (1458 mAh·g⁻1 at 0.1C), excellent rate capability (572 mAh·g⁻1 at 5C), and stable cycling with an average capacity decay rate of only 0.025% per cycle at 1C during 500 cycles. Even at high sulfur loadings (6.2 mg·cm⁻2), high initial capacities of 1173 mAh·g⁻1 (7.27 mAh·cm⁻2) are measured at 0.1C, and 1058 mAh·g⁻1 is retained after 300 cycles.

[Two kinds of percutaneous endoscopic lumbar decompression in the treatment of single level lumbar lateral recess stenosis].

OBJECTIVE: To prospectively compare the clinical efficacy and radiographic outcomes between interlaminar percutaneous endoscopic lumbar decompression(IL-PELD) and transforaminar percutaneous endoscopic lumbar decompression(TF-PELD) in the treatment of single-segment lumbar lateral recess stenosis. METHODS: From April 2018 to July 2021, 85 patients with single-segment lumbar lateral recess stenosis underment percutaneous endoscopic lumbar decompression.There were 44 males and 41 females, aged from 49 to 81 years old with an average of (65.5±8.3) years old, duration of lumbar lateral recess stenosis ranging from 3 to 83 months with an average of (26.7±16.5) months. They were divided into IL-PELD group and TF-PELD group according to the different operation methods. There were 47 patients in the IL-PELD group, including 28 males and 19 females aged from 50 to 80 yeaes old with an average age was (66.7±9.3) years old. The disease duration ranged from 3 to 65 months with an average of (25.7±15.0) months. There were 38 patients in the TF-PELD group, including 16 males and 22 females, aged from 51 to 78 years old with an average of(64.1±7.6) years old. The disease duration ranged from 4 to 73 months with an average of (27.9±18.3) months The operation time, intraoperative blood loss, intraoperative fluoroscopy, hospitalization day and complications of the two groups were recorded. Visual analogue scale (VAS) to evaluate low back pain and lower limb pain, Oswestry disability index(ODI) to evaluate lumbar function in preoperative and postoperative period(1month, 6 months and last follow-up)were recorded. the sagittal diameter of the lateral recess of the responsible intervertebral space in preoperative and 1 week after the operation were recorded. RESULTS: The operation was successfully completed in both groups without serious complications such as vascular injury, dural sac tear and nerve injury. The operation time in IL-PED group(69.3±19.3)min was significantly longer than that in TF-PELD group(57.5±14.5)min (P<0.05). There was no significant difference in the intraoperative blood loss between the two groups (P>0.05). The number of intraoperative fluoroscopy in TF-PELD group (8.8±2.6)times was significantly higher than that in IL-PED group(4.8±1.2)times (P<0.05). The hospitalization days of the two groups were not statistically significant (P>0.05). VAS for low back and lower extremity pain and ODI were (5.1±2.2), (6.9±1.3) scores and (71.4±12.6) % in IL-PELD group, and (4.7±1.8), (6.9±1.3) scores and (68.4±13.9)% in TF-PELD group. In the IL-PELD group, the VAS of low back pain was (2.4±1.5), (1.6±0.8), (1.4±0.9) scores, and the VAS of lower extremity pain was (3.0±1.2), (1.6±0.7), (1.5±1.0) scores, ODI was (32.6±11.9) %, (17.4±6.5) %, (19.3±9.3)%;In TF-PELD group, the VAS of low back pain was (2.6±1.4), (1.5±0.6), (1.4±1.0) scores, and the VAS of lower extremity pain was (2.8±1.2), (1.6±0.6), (1.5±1.2) scores, The ODI was (32.0±11.2) %, (15.0±6.1) %, and (20.0±11.3) %. The VAS and ODI of the two groups at each time point after operation were significantly improved compared with those before operation (P<0.05), but there was no statistically significant difference between the groups (P>0.05), and there was no statistically significant difference in the interaction between different time points and groups (P>0.05). At 1 week after operation, the sagittal diameter of lateral recess in both groups was significantly increased compared with that before operation (P<0.05), but there was no significant difference between the two groups at each time point (P>0.05). According to the modified Macnab criteria, IL-PELD group was rated as excellent in 24 cases, good in 19 cases and fair in 4 cases. In TF-PELD group the results were excellent in 19 cases, good in 15 cases, fair in 3 cases and poor in 1 case. There was no significant difference between the two groups (P>0.05). CONCLUSION: IL-PELD and TF-PELD can expand the lateral recess in the treatment of single level lumbar lateral recess stenosis, and have achieved good clinical effects.

Effect of microwave alone and microwave-assisted modification on the physicochemical properties of starch and its application in food.

Native starch has poor stability and usually requires modification to expand its industrial application range. Commonly used methods are physical, chemical, enzymatic and compound modification. Microwave radiation, as a kind of physical method, is promising due to its uniform energy radiation, greenness, safety, non-toxicity. It can meet the demand of consumers for safe food. Microwave-assisted modification with other methods can directly or indirectly affect the structure of starch granules to obtain modified starch with high degree of substitution and low viscosity, and the modification efficiency is greatly improved. This paper reviews the effect of microwave radiation on the physicochemical properties of starch, such as granule morphology, crystallization characteristics, and gelatinization characteristics, as well as the application of microwave radiation in starch modification and starch food processing. It provides theoretical references and suggestions for the research of microwave heating modified starch and the deep processing of starchy foods.

Experimental research and estimation model of gasoline evaporative emissions from vehicles in China.

Evaporative emission is an important source of vehicle pollutant emission and volatile organic compounds (VOCs), causing serious environmental pollution. Carbon canisters are used to store fuel vapor in evaporative emission control (EVAP) system, but canisters are prone to saturation, leading to the direct release of fuel vapor into the atmosphere. Therefore, accurate estimation of fuel vapor generation is crucial for EVAP system. Gasoline evaporation rate is mainly influenced by vapor-liquid interface area, gasoline saturated vapor pressure, filling level and temperature. The quantitative relation between different parameters and gasoline evaporation rate has rarely been reported, and a gasoline evaporative emission estimation model suitable for China needs to be proposed urgently. In this study, gasoline evaporative emission tests have been carried out in VT-SHED, and the effects of vapor-liquid interface area, filling level and temperature on gasoline evaporative emissions have been analyzed under the premise of consistent gasoline temperature and ambient temperature. Some valuable conclusions are obtained. The results show that different from expectation, gasoline evaporative emissions are not positively correlated with the vapor-liquid interface area. There is an approximately exponential relationship between the headspace volume and gasoline evaporative emissions. The widely used Reddy equation and Hata equation underestimate the gasoline vapor generation in China. Based on China VI test program and gasoline, accurate estimation of mass transfer coefficient has been conducted, and a new semi-empirical estimation model for vapor generation has been proposed. The model can accurately estimate the fuel evaporation of vehicles in China, providing guidance for the matching and optimization of EVAP system.

[Effect and complication among different kinds of spinal endoscopic surgery for lumbar disc herniation].

OBJECTIVE: To compare clinical efficacy and complication rate of percutaneous endoscopic transforaminal discectomy(PETD),percutaneous endoscopic interlaminar discectomy (PEID) and unilateral biportal endoscopic (UBE) in treating single-segment lumbar disc herniation(LDH). METHODS: From October 2019 to August 2021,121 LDH patients with single-segment treated by spinal endoscopy were retrospectively analyzed and divided into three groups. In PETD group,there were 48 patients,including 19 males and 29 females,aged from 18 to 72 years old with an average of (44.0±13.9) years old;3 patients with L3,4 segments,27 patients with L4,5 segments,and 18 patients with L5S1 segments. In PEID group,there were 43 patients,including 23 males and 20 females,aged from 20 to 69 years old with an average of (40.1±12.1) years old;1 patient with L3,4 segments,15 patients with L4,5 segments,and 27 patients with L5S1 segments. In UBE group,there were 30 patients,including 12 males and 18 females,aged from 29 to 72 years old with an average of (41.2±15.0) years old;1 patient with L3,4 segments,18 patients with L4,5 segments,and 11 patients with L5S1 segments. Operation time,blood loss,fluoroscopy times and complications among three groups were observed and compared. Before opertaion,3 months after operation and at the latest follow-up,visual analogue scale (VAS) was used to evaluate low back pain and lower extremity pain,Oswestry disfunction index (ODI) was used to evaluate lumbar function,and modified MacNab was used to evaluate clinical efficacy at the latest follow-up. RESULTS: All patients were performed endoscopic spinal surgery completly and were followed up for at least 12 months. One patient occurred dural sac rupture both in PETD and PEID group,and dural sac rupture was small,and there was no obvious discomfort after operation. Two patients were occurred intraoperative rupture of dural sac in UBE group. One patient was occurred cerebrospinal fluid leakage after operation,and was improved after rest in supine position and fluid rehydration. One patient without no significant postoperative discomfort. (1)There were no significant difference in operating time,blood loss and hospital stay between PETD and PEID group (P>0.05),while UBE group was higher than those of PETD and PEID group (P<0.05). There was no statistical significance in fluoroscopy times between PEID and UBE group (P>0.05),but PETD group was higher than that of PEID and UBE group (P<0.05). (2)VAS of low back pain at 3 months after operation in UBE group was higher than that in PETD and PEID group (P<0.05),but there was no significant difference between PETD and PEID group (P>0.05). At the latest follow-up,there was no significant difference in VAS of low back pain among three groups (P>0.05). (3)Lower extremity pain of VAS and ODI among 3 groups after operation were significantly improved at all time points compared with those before opertaion(P<0.05),and there were no statistical significance between groups (P>0.05),and there were no statistical significance in interaction between different time points and operation groups (P>0.05). (4) At the latest follow-up,according to the modified MacNab standard,the results of PETD group were excellent in 27 patients,good in 16 patients,moderate in 4 patients,poor in 1 patient;in PEID group,27 patients got excellent result,12 good,3 moderate,and 1 poor;in UBE group,16 patients got excellent,10 good,2 moderate,and 2 poor. There was no significant difference among three groups (χ2=0.308,P>0.05). Recurrence of lumbar disc herniation occurred in 1 patient among each three groups,symptoms were improved in 2 patients after symptomatic treatment,and 1 patient was treated in other hospitals. CONCLUSION: PETD,PEID and UBE techniques could achieve good early clinical effects in treating lumbar disc herniation with similar complication rates. Both of PETD and PEID are single-channel minimally invasive surgery,with mild intraoperative tissue damage and quick postoperative recovery; while intraoperative fluoroscopy of PETD was relatively more frequent, and PEID was more suitable for L5S1 segment;UBE is a two-channel surgery,in which the intraoperative soft tissue damage is more severe,but exposure is broad,which is more suitable for complex cases.

High-flow nasal oxygenation versus face mask oxygenation for preoxygenation in patients undergoing double-lumen endobronchial intubation: protocol of a randomised controlled trial.

INTRODUCTION: With the growing emphasis on swift recovery, minimally invasive thoracic surgery has advanced significantly. Video-assisted thoracoscopic surgery (VATS) has seen rapid development, and the double-lumen tube (DLT) remains the most dependable method for tracheal intubation in VATS. However, hypoxaemia during DLT intubation poses a threat to the perioperative safety of thoracic surgery patients. Recently, transnasal high-flow nasal oxygen (HFNO) has shown promise in anaesthesia, particularly in handling short-duration hypoxic airway emergencies. Yet, its application in the perioperative period for patients undergoing pulmonary surgery with compromised cardiopulmonary function lacks evidence, and there are limited reliable clinical data. METHODS AND ANALYSIS: A prospective, randomised, controlled, single-blind design will be employed in this study. 112 patients aged 18-60 years undergoing elective VATS-assisted pulmonary surgery will be enrolled and randomly divided into two groups: the nasal high-flow oxygen group (H group) and the traditional mask transnasal oxygen group (M group) in a 1:1 ratio. HFNO will be used during DLT intubation for the prevention of asphyxia in group H, while conventional intubation procedures will be followed by group M. Comparison will be made between the two groups in terms of minimum oxygen saturation during intubation, hypoxaemia incidence during intubation, perioperative complications and postoperative hospital days. ETHICS AND DISSEMINATION: Approval for this study has been granted by the local ethics committee at Shenzhen Second People's Hospital. The trial results will be disseminated through peer-reviewed journals and scientific conferences. TRIAL REGISTRATION NUMBER: NCT05666908.

Contact Piezoresistive Sensors Based on Electro-Polymerized Polypyrrole and a Regulated Conductive Pathway.

The performance of contact resistive pressure sensors heavily relies on the intrinsic characteristics of the active layers, including the mechanical surface structure, conductivity, and elastic properties. However, efficiently and simply regulating the conductivity, morphology, and modulus of the active layers has remained a challenge. In this study, we introduced electro-polymerized polypyrrole (ePPy) to design flexible contact piezoresistive sensors with tailored intrinsic properties. The customizable intrinsic property of ePPy was comprehensively illustrated on the chemical and electronic structure scale, and the impact of ePPy's intrinsic properties on the sensing performance of the device was investigated by determining the correlation between resistivity, roughness, and device sensitivity. Due to the synergistic effects of roughness, conductivity, and elastic properties of the active layers, the flexible ePPy-based pressure sensor exhibited high sensitivity (3.19 kPa-1, 1-10 kPa, R2 = 0.97), fast response time, good durability, and low power consumption. These advantages allowed the sensor to offer an immediate response to human motion such as finger-bending and grasping movements, demonstrating the promising potential of tailorable ePPy-based contact piezoresistive sensors for wearable electronic applications.

Dexamethasone inhibits IL-8 via glycolysis and mitochondria-related pathway to regulate inflammatory pain.

BACKGROUND: Dexamethasone (Dexa) has been recently found to exert an analgesic effect, whose action is closely related to IL-8. However, whether dexamethasone induces antinociception via glycolysis and mitochondria-related pathways is still unclear. METHODS: Right hind paw inflammatory pain in mice was induced by intraplantar injection of Freund's Complete Adjuvant (FCA). Von Frey test was then used to measure the paw withdrawal threshold. The detection of glycolysis and mitochondrial pathway-related proteins and IL-8 were determined by Western blot and ELISA. The potential interaction between Dexa and fructose-1,6-bisphosphate (FBP, a PKM2 activator) was examined by simulation predictions using molecular docking. RESULTS: Intrathecal administration of Dexa (20 µg/20 µL) had an obvious analgesic effect in FCA-treated mice, which was counteracted by the glycolysis inhibitor 2-deoxyglucose (2-DG, 5 mg/20 µL) or the mitochondria-related pathway inhibitor oligomycin complex (Oligo, 5 µg/20 µL). In the glycolysis pathway, Dexa decreased GLUT3 and had no impact on HIF-1α expression during FCA-induced inflammation. Additionally, Dexa further increased the PKM2 level, accompanied by the formation of hydrogen bonds between Dexa and the PKM2 activator fructose-1,6-bisphosphate (FBP). In the mitochondrial pathway, Dexa downregulated the expression of Mfn2 protein but not the PGC-1α and SIRT-1 levels in the spinal cord. Moreover, both 2-DG and Oligo decreased Mfn2 expression. Finally, IL-8 level was reduced by the single or combined administration of Dexa, 2-DG, and Oligo. CONCLUSION: Dexa attenuated IL-8 expression via glycolysis and mitochondrial pathway-related proteins, thus mediating the analgesic effect during inflammatory pain.

Brookite TiO2 Nanorods as Promising Electrochromic and Energy Storage Materials for Smart Windows.

Electrochromic smart windows (ESWs) offer an attractive option for regulating indoor lighting conditions. Electrochromic materials based on ion insertion/desertion mechanisms also present the possibility for energy storage, thereby increasing overall energy efficiency and adding value to the system. However, current electrochromic electrodes suffer from performance degradation, long response time, and low coloration efficiency. This work aims to produce defect-engineered brookite titanium dioxide (TiO2 ) nanorods (NRs) with different lengths and investigate their electrochromic performance as potential energy storage materials. The controllable synthesis of TiO2 NRs with inherent defects, along with smaller impedance and higher carrier concentrations, significantly enhances their electrochromic performance, including improved resistance to degradation, shorter response times, and enhanced coloration efficiency. The electrochromic performance of TiO2 NRs, particularly longer ones, is characterized by fast switching speeds (20 s for coloration and 12 s for bleaching), high coloration efficiency (84.96 cm2  C-1 at a 600 nm wavelength), and good stability, highlighting their potential for advanced electrochromic smart window applications based on Li+ ion intercalation.

An Open-Label, Uncontrolled, Single-Arm Clinical Trial of Tofacitinib, an Oral JAK1 and JAK3 Kinase Inhibitor, in Chinese Patients with Keloid.

BACKGROUND: The keloid treatment is still a thorny and complicated clinical problem, especially in multiple keloids induced by wound, severe burn, ethnic background or cultural behaviors, or unexplained skin healing. Mainstream treatments have limited efficacy in treating multiple keloids. As no oral treatment with painlessness and convenience is available, oral treatment strategies should be formulated. OBJECTIVES: This study aimed to investigate the efficacy and therapeutic mechanism of oral tofacitinib in keloid patients. METHODS: We recruited the 7 patients with keloid scars and prescribed 5 mg of tofacitinib twice a day orally with a maximum follow-up of 12 weeks. The Patient and Observer Scar Assessment Scale (POSAS), the Vancouver scar scale (VSS), ANTERA 3D camera, and the DUB Skin Scanner 75 were used to assess the characteristics of the lesion. Immunohistochemistry was performed to evaluate collagen synthesis, proliferation, and relative molecular pathways. Moreover, the effects of tofacitinib were assessed on keloid fibroblast in vitro. RESULTS: After 12 weeks of oral tofacitinib, significant improvement in POSAS, VSS, and Dermatology Life Quality Index (DLQI) scores was observed (p < 0.05). The volume, lesion height, and dermis thickness of the keloid decreased (p < 0.05). Moreover, significant decreases in the expression of collagen I, Ki67, p-STAT 3, and p-SMAD2 were observed after 12 weeks of administration. In vitro experiments suggested that tofacitinib treatment inhibits fibroblast proliferation and collagen I synthesis via suppression of STAT3 and SMAD2 pathway. CONCLUSION: Tofacitinib, a new candidate oral drug for keloid, could reduce keloid lesion volume by inhibiting collagen synthesis and inhibiting fibroblast proliferation, and alleviate itch and pain to obtain a better life quality.

A 3d-4d-5d High Entropy Alloy as a Bifunctional Oxygen Catalyst for Robust Aqueous Zinc-Air Batteries.

High entropy alloys (HEAs) are highly suitable candidate catalysts for oxygen evolution and reduction reactions (OER/ORR) as they offer numerous parameters for optimizing the electronic structure and catalytic sites. Herein, FeCoNiMoW HEA nanoparticles are synthesized using a solution-based low-temperature approach. Such FeCoNiMoW nanoparticles show high entropy properties, subtle lattice distortions, and modulated electronic structure, leading to superior OER performance with an overpotential of 233 mV at 10 mA cm-2 and 276 mV at 100 mA cm-2 . Density functional theory calculations reveal the electronic structures of the FeCoNiMoW active sites with an optimized d-band center position that enables suitable adsorption of OOH* intermediates and reduces the Gibbs free energy barrier in the OER process. Aqueous zinc-air batteries (ZABs) based on this HEA demonstrate a high open circuit potential of 1.59 V, a peak power density of 116.9 mW cm-2 , a specific capacity of 857 mAh gZn -1 , and excellent stability for over 660 h of continuous charge-discharge cycles. Flexible and solid ZABs are also assembled and tested, displaying excellent charge-discharge performance at different bending angles. This work shows the significance of 4d/5d metal-modulated electronic structure and optimized adsorption ability to improve the performance of OER/ORR, ZABs, and beyond.

Implementing quantum dimensionality reduction for non-Markovian stochastic simulation.

Complex systems are embedded in our everyday experience. Stochastic modelling enables us to understand and predict the behaviour of such systems, cementing its utility across the quantitative sciences. Accurate models of highly non-Markovian processes - where the future behaviour depends on events that happened far in the past - must track copious amounts of information about past observations, requiring high-dimensional memories. Quantum technologies can ameliorate this cost, allowing models of the same processes with lower memory dimension than corresponding classical models. Here we implement such memory-efficient quantum models for a family of non-Markovian processes using a photonic setup. We show that with a single qubit of memory our implemented quantum models can attain higher precision than possible with any classical model of the same memory dimension. This heralds a key step towards applying quantum technologies in complex systems modelling.

PC6 electroacupuncture reduces stress-induced autonomic and neuroendocrine responses in rats.

Stress can trigger cardiovascular disease. Both imbalance of autonomic nervous activity and increase of neurohormonal output are core aspects of stress responses and can lead to cardiovascular disease. PC6 as a very important acupoint is used to prevent and treat cardiovascular disease and to improve stress-related activities. We examined the influence of electroacupuncture (EA) at PC6 on stress-induced imbalance of autonomic nervous activity and increase of neurohormonal output. EA at PC6 relieved increased cardiac sympathetic nervous activity and decreased cardiac vagal nervous activity induced by immobilization stress. Also, EA at PC6 reduced immobilization stress-induced increases of plasma norepinephrine (NE) and adrenaline (E) released from sympatho-adrenal-medullary axis. Finally, EA at PC6 reduced immobilization stress-induced increases of corticotropin-releasing hormone (CRH) in paraventricular hypothalamic nucleus and plasma cortisol (CORT) released from hypothalamic-pituitary-adrenal axis. However, EA at tail had no significant effect on the stress-induced autonomic and neuroendocrine responses. The results demonstrate the role of EA at PC6 regulating the autonomic and neuroendocrine responses induced by stress and provide insight into the prevention and treatment of EA at PC6 for stress-induced cardiovascular disease by targeting autonomic and neuroendocrine systems.

Selective Ethylene Glycol Oxidation to Formate on Nickel Selenide with Simultaneous Evolution of Hydrogen.

There is an urgent need for cost-effective strategies to produce hydrogen from renewable net-zero carbon sources using renewable energies. In this context, the electrochemical hydrogen evolution reaction can be boosted by replacing the oxygen evolution reaction with the oxidation of small organic molecules, such as ethylene glycol (EG). EG is a particularly interesting organic liquid with two hydroxyl groups that can be transformed into a variety of C1 and C2 chemicals, depending on the catalyst and reaction conditions. Here, a catalyst is demonstrated for the selective EG oxidation reaction (EGOR) to formate on nickel selenide. The catalyst nanoparticle (NP) morphology and crystallographic phase are tuned to maximize its performance. The optimized NiS electrocatalyst requires just 1.395 V to drive a current density of 50 mA cm-2 in 1 m potassium hydroxide (KOH) and 1 m EG. A combination of in situ electrochemical infrared absorption spectroscopy (IRAS) to monitor the electrocatalytic process and ex situ analysis of the electrolyte composition shows the main EGOR product is formate, with a Faradaic efficiency above 80%. Additionally, C2 chemicals such as glycolate and oxalate are detected and quantified as minor products. Density functional theory (DFT) calculations of the reaction process show the glycol-to-oxalate pathway to be favored via the glycolate formation, where the CC bond is broken and further electro-oxidized to formate.

Competitive adsorption characteristics of gasoline evaporated VOCs in microporous activated carbon by molecular simulation.

The activated carbon in the vehicle's carbon canister needs to adsorb a variety of VOCs (Volatile Organic Compounds) emitted by gasoline evaporation, while the difference in gas adsorption capacity can lead to adsorption competition phenomena. In this study, three typical VOCs (toluene, cyclohexane, and ethanol) were selected to study the adsorption competition characteristics between multi-component gases at different pressures by molecular simulation method. In addition, the effect of temperature on adsorption competition was also investigated. The results show that the selectivity of activated carbon to toluene is negatively correlated with the adsorption pressure, but the opposite is true for ethanol, and the change of cyclohexane is not significant. The competitive order of the three VOCs is toluene > cyclohexane > ethanol at low pressure, which becomes ethanol > toluene > cyclohexane at high pressure. With increasing pressure, the interaction energy decreases from 12.87 kcal/mol to 11.87 kcal/mol, where the electrostatic interaction energy increases from 1.97 kcal/mol to 2.54 kcal/mol. In microporous activated carbon, the competition is mainly manifested in that ethanol preempts the low-energy adsorption sites of toluene in the pore size of 10 Å to 18 Å, while gas molecules near the surface of activated carbon or in smaller pore sizes are stably adsorbed without competition. Despite the fact that high temperature decreases the total adsorption capacity, activated carbon selectivity for toluene increases instead, while the competitiveness of polar ethanol decreases significantly.

Repetitive transcranial magnetic stimulation promotes neurological functional recovery in rats with traumatic brain injury by upregulating synaptic plasticity-related proteins.

Studies have shown that repetitive transcranial magnetic stimulation (rTMS) can enhance synaptic plasticity and improve neurological dysfunction. However, the mechanism through which rTMS can improve moderate traumatic brain injury remains poorly understood. In this study, we established rat models of moderate traumatic brain injury using Feeney's weight-dropping method and treated them using rTMS. To help determine the mechanism of action, we measured levels of several important brain activity-related proteins and their mRNA. On the injured side of the brain, we found that rTMS increased the protein levels and mRNA expression of brain-derived neurotrophic factor, tropomyosin receptor kinase B, N-methyl-D-aspartic acid receptor 1, and phosphorylated cAMP response element binding protein, which are closely associated with the occurrence of long-term potentiation. rTMS also partially reversed the loss of synaptophysin after injury and promoted the remodeling of synaptic ultrastructure. These findings suggest that upregulation of synaptic plasticity-related protein expression is the mechanism through which rTMS promotes neurological function recovery after moderate traumatic brain injury.

Comparison of ARIMA model, DNN model and LSTM model in predicting disease burden of occupational pneumoconiosis in Tianjin, China.

BACKGROUND: This study aims to explore appropriate model for predicting the disease burden of pneumoconiosis in Tianjin by comparing the prediction effects of Autoregressive Integrated Moving Average (ARIMA) model, Deep Neural Networks (DNN) model and multivariate Long Short-Term Memory Neural Network (LSTM) models. METHODS: Disability adjusted life year (DALY) was used to evaluate the disease burden of occupational pneumoconiosis. ARIMA model, DNN model and multivariate LSTM model were used to establish prediction model. Three performance evaluation metrics including Root Mean Squared Error (RMSE), Mean Absolute Error (MAE) and Mean Absolute Percentage Error (MAPE) were used to compare the prediction effects of the three models. RESULTS: From 1990 to 2021, there were 10,694 cases of pneumoconiosis patients in Tianjin, resulting in a total of 112,725.52 person-years of DALY. During this period, the annual DALY showed a fluctuating trend, but it had a strong correlation with the number of pneumoconiosis patients, the average age of onset, the average age of receiving dust and the gross industrial product, and had a significant nonlinear relationship with them. The comparison of prediction results showed that the performance of multivariate LSTM model and DNN model is much better than that of traditional ARIMA model. Compared with the DNN model, the multivariate LSTM model performed better in the training set, showing lower RMES (42.30 vs. 380.96), MAE (29.53 vs. 231.20) and MAPE (1.63% vs. 2.93%), but performed less stable than the DNN on the test set, showing slightly higher RMSE (1309.14 vs. 656.44), MAE (886.98 vs. 594.47) and MAPE (36.86% vs. 22.43%). CONCLUSION: The machine learning techniques of DNN and LSTM are an innovative method to accurately and efficiently predict the burden of pneumoconiosis with the simplest data. It has great application prospects in the monitoring and early warning system of occupational disease burden.

CoFeNiMnZnB as a High-Entropy Metal Boride to Boost the Oxygen Evolution Reaction.

High-entropy materials offer numerous advantages as catalysts, including a flexible composition to tune the catalytic activity and selectivity and a large variety of adsorption/reaction sites for multistep or multiple reactions. Herein, we report on the synthesis, properties, and electrocatalytic performance of an amorphous high-entropy boride based on abundant transition metals, CoFeNiMnZnB. This metal boride provides excellent performance toward the oxygen evolution reaction (OER), including a low overpotential of 261 mV at 10 mA cm-2, a reduced Tafel slope of 56.8 mV dec-1, and very high stability. The outstanding OER performance of CoFeNiMnZnB is attributed to the synergistic interactions between the different metals, the leaching of Zn ions, the generation of oxygen vacancies, and the in situ formation of an amorphous oxyhydroxide at the CoFeNiMnZnB surface during the OER.

Experimental quantification of dynamical coherence via entangling two qubits.

Coherence and entanglement are both the fundamental properties which quantify the degree of nonclassicality possessed in a quantum state. Recently coherence and entanglement are considered as a dynamical resource where the nonclassicality is strongly related to the amount of the static resources which can be generated in a quantum process. In [Phys. Rev. Lett.125, 130401 (2020)10.1103/PhysRevLett.125.130401], for the first time, the authors study the interconvertability of these two kinds of dynamical resources. Here, we demonstrate this resource conversion in an all optical setup, and successfully observe the dynamical resource conversion. The experimental observation prove the ability of manipulating dynamical resource within current quantum photonic technologies.