SnO2 Interacted with Sodium Thiosulfate for Perovskite Solar Cells over 25% Efficiency.

Tin oxide (SnO2) as electron transportation layer (ETL) has demonstrated remarkable performance applied in perovskite solar cells but still accommodated a host of defects such as oxygen vacancies, uncoordinated Sn4+ , and absorbed hydroxyl groups. Here, we use inorganic sodium thiosulfate Na2S2O3 to modify SnO2 nanoparticles in a bulk blending manner. Strong interaction between Na2S2O3 and SnO2 occurs, as reflected from the elemental chemical state change. The interaction has endowed the SnO2 film with better uniformity, increased conductivity, and more matched energy level with perovskite. Moreover, the modified SnO2 film as a substrate could promote the crystallization of perovskite by suppressing unreacted residual PbI2. The trap density from perovskite bulk to the SnO2 film across their interface has been effectively reduced, thus inhibiting the nonradiative recombination and promoting the transportation and extraction of charge carriers. Finally, the solar cell based on modified SnO2 has achieved a champion efficiency of 25.2%, demonstrating the effectiveness and potential of sulfur-containing molecules on optimizing the SnO2 property.

Orientation Manipulation and Defect Passivation for Perovskite Solar Cells by a Natural Compound.

Different facets in perovskite crystals exhibit distinct atomic arrangements, influencing their electronic, physical, and chemical properties. Perovskite films incorporating tin oxide (SnO2) as the electron transport layer face challenges in facet regulation. This study reveals that tea saponin (TS), a natural compound serves as a SnO2 modifier, facilitates optimal growth of perovskite crystals on the (111) facet. The modification promotes preferential crystal orientation through hydrogen bond and Lewis coordination. TS forms a chelate with SnO2, resulting in a smoother film and n-type doping, leading to improved carrier extraction and reduced defects. The TS-modified perovskite solar cells achieve a champion efficiency of 24.2%, leveraging from an obvious enhancement of open-circuit voltage (Voc) of 1.18 V and fill factor (FF) of 82.8%. The devices also demonstrate enhanced humidity tolerance and storage stability, ensuring improved stability without encapsulation.

Erosion of Granite Red Soil Slope and Processes of Subsurface Flow Generation, Prediction, and Simulation.

A deeper understanding of the rainfall-flow processes can improve the knowledge of the rain-driven erosional processes in coarse-textured agricultural soil. In this study, on the red soil slope farmland developed from weathered granite, a simulated rainfall experiment was conducted to study the characteristics of rainfall redistribution, the processes of surface-subsurface flow generation and prediction, and sediment production. Rainfalls with three intensities of 45, 90, and 135 mm h-1 with a duration of 90 min were applied to the weathered granite red soil with the slope gradient of 10°. Under 45 mm h-1 rainfall intensity, the output of rainwater was composed by subsurface flow and bottom penetration, accounting for 35.80% and 39.01% of total rainfall, respectively. When the rainfall intensities increased to 90 and 135 mm h-1, the surface flow became the main output of rainwater, accounting for 83.94% and 92.42%, respectively. Coarsened soil exhibited strong infiltration-promoting but poor water-storage capacities under light rainfalls. With an increased rainfall intensity, the surface flow coefficient increased from 19.87% to 92.42%, while the amount of subsurface flow and bottom penetration decreased by 1.3 and 6.2 L, respectively. For sediment production, the sediment concentration was raised from 1.39 to 7.70 g L-1, and D10, D50, and D90 increased by 1.50, 1.83, and 1.40 times, respectively. The content of coarse particles (>1 mm) in surface soil increased by 12%, while the content of fine particles (<0.5 mm) decreased by 9.6%. Under strong rainfalls, severe soil and water loss, coarsening soil surface, and large loss of fine particles became major problems. During rainfall, the subsurface flow and bottom penetration could be predicted well through quadratic equations of rainfall time, which transformed into time-dependent exponential functions after rainfall. The results provide a theoretical basis and data reference for soil erosion prevention and water management in coarse-textured agricultural lands.

Selective mediation of ovarian cancer SKOV3 cells death by pristine carbon quantum dots/Cu2O composite through targeting matrix metalloproteinases, angiogenic cytokines and cytoskeleton.

It was shown that some nanomaterials may have anticancer properties, but lack of selectivity is one of challenges, let alone selective suppression of cancer growth by regulating the cellular microenvironment. Herein, we demonstrated for the first time that carbon quantum dots/Cu2O composite (CQDs/Cu2O) selectively inhibited ovarian cancer SKOV3 cells by targeting cellular microenvironment, such as matrix metalloproteinases, angiogenic cytokines and cytoskeleton. The result was showed CQDs/Cu2O possessed anticancer properties against SKOV3 cells with IC50 = 0.85 µg mL-1, which was approximately threefold lower than other tested cancer cells and approximately 12-fold lower than normal cells. Compared with popular anticancer drugs, the IC50 of CQDs/Cu2O was approximately 114-fold and 75-fold lower than the IC50 of commercial artesunate (ART) and oxaliplatin (OXA). Furthermore, CQDs/Cu2O possessed the ability to decrease the expression of MMP-2/9 and induced alterations in the cytoskeleton of SKOV3 cells by disruption of F-actin. It also exhibited stronger antiangiogenic effects than commercial antiangiogenic inhibitor (SU5416) through down-regulating the expression of VEGFR2. In addition, CQDs/Cu2O has a vital function on transcriptional regulation of multiple genes in SKOV3 cells, where 495 genes were up-regulated and 756 genes were down-regulated. It is worth noting that CQDs/Cu2O also regulated angiogenesis-related genes in SKOV3 cells, such as Maspin and TSP1 gene, to suppress angiogenesis. Therefore, CQDs/Cu2O selectively mediated of ovarian cancer SKOV3 cells death mainly through decreasing the expression of MMP-2, MMP-9, F-actin, and VEGFR2, meanwhile CQDs/Cu2O caused apoptosis of SKOV3 via S phase cell cycle arrest. These findings reveal a new application for the use of CQDs/Cu2O composite as potential therapeutic interventions in ovarian cancer SKOV3 cells.

One-pot synthesis of CdS/metal-organic framework aerogel composites for efficient visible photocatalytic reduction of aqueous Cr(vi).

Metal-organic framework aerogels (MOAs) embedded with CdS (CdS/MOA(Cr)) synthesized via a facile one-pot solvothermal method have a larger surface area than pristine MOA(Cr) and the post-synthesized composite. CdS/MOA(Cr) exhibited 5 times enhancement in the photocatalytic activity than that of pure CdS for Cr(vi) reduction under visible light without adding any sacrificial agent, due to the larger surface area and photosensitazation of MOA(Cr).

Ultrasensitive Detection of Protein Based on Graphene Quantum Dots with Resonance Light Scattering Technique.

In this paper, a simple, label-free and ultrasensitive resonance light scattering (RLS) method for ultratrace protein detection was investigated using graphene quantum dots (GQDs) as probes. Due to the electrostatic interaction between GQDs and protein, the RLS intensity was gradually enhanced as the protein was added into the GQDs solution. Through a series of optimization experiments, the optimal detection conditions of the GQDs solution were as follows: pH = 7.4, 2 M ion concentration and 60 µM GQDs. Under the optimized conditions, the linear correlation between the GQDs and the concentration of protein was observed from 10 µM to 60 µM with the correlation coefficient (R2) of 0.9978, and the limit of detection (LOD) was 2.4 µM. Time-resolved fluorescence spectrum showed that the electron transition channel was not affected by the protein self-assembled on the surface of GQDs, which indicated that the interaction between GQDs and protein was mainly the electrostatic interaction. The proposed method revealed that the RLS enhancement effect from the self-assembled GQDs-protein hybrid nano-system provided a green and simple method to establish ultrasensitive biosensors.