Optical shield: measuring viscosity of turbid fluids using optical tweezers.

The viscosity of a fluid can be measured by tracking the motion of a suspended micron-sized particle trapped by optical tweezers. However, when the particle density is high, additional particles entering the trap compromise the tracking procedure and degrade the accuracy of the measurement. In this work we introduce an additional Laguerre-Gaussian, i.e. annular, beam surrounding the trap, acting as an optical shield to exclude contaminating particles.

Phase-transition-like properties of double-beam optical tweezers.

We report on double-beam optical tweezers that undergo previously unknown phase-transition-like behavior resulting in the formation of more optical traps than the number of beams used to create them. We classify the optical force fields which produce multiple traps for a double-beam system including the critical behavior. This effect is demonstrated experimentally in orthogonally polarized (noninterfering) dual-beam optical tweezers for a silica particle of 2.32 µm diameter. Phase transitions of multiple beam trapping systems have implications for hopping rates between traps and detection of forces between biomolecules using dual-beam optical tweezers. It is an example of a novel dynamic system with multiple states where force fields undergo a series of sign inversions as a function of parameters such as size and beam separation.

Versatile two-dimensional potentials for ultra-cold atoms.

We propose and investigate a technique for generating smooth two-dimensional potentials for ultra-cold atoms based on the rapid scanning of a far-detuned laser beam using a two-dimensional acousto-optical modulator (AOM). We demonstrate the implementation of a feed-forward mechanism for fast and accurate control of the spatial intensity of the laser beam, resulting in improved homogeneity for the atom trap. This technique could be used to generate a smooth toroidal trap that would be useful for static and dynamic experiments on superfluidity and persistent currents with ultra-cold atoms.

Linewidth reduction in a large-smile laser diode array.

We present theory and simulations for a spectral narrowing scheme for laser diode arrays (LDAs) that employs optical feedback from a diffraction grating. We calculate the effect of the so-called smile of the LDA and show that it is possible to reduce the effect by using a cylindrical lens set at an angle to the beam. The scheme is implemented on a 19-element LDA with smile of 7.6 microm and yields frequency narrowing from a free-running width of 2 to 0.15 nm. The experimental results are in good agreement with the theory.

Laser frequency locking by direct measurement of detuning.

We present a new method of laser frequency locking in which the feedback signal is directly proportional to the detuning from an atomic transition, even at detunings many times the natural linewidth of the transition. Our method is a form of sub-Doppler polarization spectroscopy, based on measuring two Stokes parameters (I2 and I3) of light transmitted through a vapor cell. It extends the linear capture range of the lock loop by as much as an order of magnitude and provides frequency discrimination equivalent to or better than those of other commonly used locking techniques.

Controlling chaos in a Lorenz-like system using feedback.

We demonstrate that the dynamics of an autonomous chaotic laser can be controlled to a periodic or steady state under self-synchronization. In general, past the chaos threshold the dependence of the laser output on feedback applied to the pump is submerged in the Lorenz-like chaotic pulsation. However there exist specific feedback delays that stabilize the chaos to periodic behavior or even steady state. The range of control depends critically on the feedback delay time and amplitude. Our experimental results are compared with the complex Lorenz equations which show good agreement.

Controlling the complex Lorenz equations by modulation.

We demonstrate that a system obeying the complex Lorenz equations in the deep chaotic regime can be controlled to periodic behavior by applying a modulation to the pump parameter. For arbitrary modulation frequency and amplitude there is no obvious simplification of the dynamics. However, we find that there are numerous windows where the chaotic system has been controlled to different periodic behaviors. The widths of these windows in parameter space are narrow, and the positions are related to the ratio of the modulation frequency of the pump to the average pulsation frequency of the output variable. These results are in good agreement with observations previously made in a far-infrared laser system.

Transforming chaos to periodic oscillations.

We demonstrate that the dynamics of an autonomous chaotic class C laser can be controlled to a periodic state via external modulation of the pump. In the absence of modulation, above the chaos threshold, the laser exhibits Lorenz-like chaotic pulsations. The average amplitude and frequency of these pulsations depend on the pump power. We find that there exist parameter windows where modulation of the pump power extinguishes the chaos in favor of simpler periodic behavior. Moreover we find a number of locking ratios between the pump and laser output follow the Farey sequence.

Micromanipulation of chloroplasts using optical tweezers.

This paper describes experiments using optical tweezers to probe chloroplast arrangement, shape and consistency in cells of living leaf tissue and in suspension. Dual optical tweezers provided two-point contact on a single chloroplast or two-point contact on two adhered chloroplasts for manipulation in suspension. Alternatively, a microstirrer consisting of a birefringent particle trapped in an elliptically polarized laser trap was used to induce motion and tumbling of a selected chloroplast suspended in a solution. We demonstrate that displacement of chloroplasts inside the cell is extremely difficult, presumably due to chloroplast adhesion to the cytoskeleton and connections between organelles. The study also confirms that the chloroplasts are very thin and extremely cup-shaped with a concave inner surface and a convex outer surface.

Dynamical tunnelling of ultracold atoms.

The divergence of quantum and classical descriptions of particle motion is clearly apparent in quantum tunnelling between two regions of classically stable motion. An archetype of such non-classical motion is tunnelling through an energy barrier. In the 1980s, a new process, 'dynamical' tunnelling, was predicted, involving no potential energy barrier; however, a constant of the motion (other than energy) still forbids classically the quantum-allowed motion. This process should occur, for example, in periodically driven, nonlinear hamiltonian systems with one degree of freedom. Such systems may be chaotic, consisting of regions in phase space of stable, regular motion embedded in a sea of chaos. Previous studies predicted dynamical tunnelling between these stable regions. Here we observe dynamical tunnelling of ultracold atoms from a Bose-Einstein condensate in an amplitude-modulated optical standing wave. Atoms coherently tunnel back and forth between their initial state of oscillatory motion (corresponding to an island of regular motion) and the state oscillating 180 degrees out of phase with the initial state.

Distributed laser refrigeration.

A 250-mum-diameter fiber of ytterbium-doped ZBLAN (fluorine combined with Zr, Ba, La, Al, and Na) has been cooled from room temperature. We coupled 1.0 W of laser light from a 1013-nm diode laser into the fiber. We measured the temperature of the fiber by using both fluorescence techniques and a microthermocouple. These microthermocouple measurements show that the cooled fiber can be used to refrigerate materials brought into contact with it. This, in conjunction with the use of a diode laser as the light source, demonstrates that practical solid-state laser coolers can be realized.

Three-dimensional imaging with optical tweezers.

We demonstrate a three-dimensional scanning probe microscope in which the extremely soft spring of an optical tweezers trap is used. Feedback control of the instrument based on backscattered light levels allows three-dimensional imaging of microscopic samples in an aqueous environment. Preliminary results with a 2-microm-diameter spherical probe indicate that features of approximately 200 nm can be resolved, with a sensitivity of 5 nm in the height measurement. The theoretical resolution is limited by the probe dimensions.

Optical torque controlled by elliptical polarization.

We show theoretically and demonstrate experimentally that highly absorbing particles can be trapped and manipulated in a single highly focused Gaussian beam. Our studies of the effects of polarized light on such particles show that they can be set into rotation by elliptically polarized light and that both the sense and the speed of their rotation can be smoothly controlled.

Stages of chaotic synchronization.

In an experimental investigation of the response of a chaotic system to a chaotic driving force, we have observed synchronization of chaos of the response system in the forms of generalized synchronization, phase synchronization, and lag synchronization to the driving signal. In this paper we compare the features of these forms of synchronized chaos and study their relations and physical origins. We found that different forms of chaotic synchronization could be interpreted as different stages of nonlinear interaction between the coupled chaotic systems. (c) 1998 American Institute of Physics.

Plane-wave theory of a Michelson laser coupler with a dielectric slab beam splitter.

The plane-wave theory for the transmittance and absorbtance of a perfectly aligned Michelson coupler with a dielectric slab beam splitter is presented. It is shown that the transmittance and absorbtance vary sinusoidally and in quadrature. As a result of this quadrature relationship, the maximum transmittance occurs at a setting of the translatable coupler mirror at which the absorbtance is not at an extremum, and so the curve of output power as a function of coupler setting is asymmetrical with respect to the setting yielding maximum transmittance. Experimental measurements of the output power of a far-infrared HCN laser as a function of the coupler setting confirm this asymmetry, which seems to have been overlooked or ignored in previous studies.

Determination of the force constant of a single-beam gradient trap by measurement of backscattered light.

A single-beam gradient trap could potentially be used to hold a stylus for scanning force microscopy. With a view to development of this technique, we modeled the optical trap as a harmonic oscillator and therefore characterized it by its force constant. We measured force constants and resonant frequencies for 1-4-µm-diameter polystyrene spheres in a single-beam gradient trap using measurements of backscattered light. Force constants were determined with both Gaussian and doughnut laser modes, with powers of 3 and 1 mW, respectively. Typical values for spring constants were measured to be between 10(-6) and 4 × 10(-6) N/m. The resonant frequencies of trapped particles were measured to be between 1 and 10 kHz, and the rms amplitudes of oscillations were estimated to be around 40 nm. Our results confirm that the use of the doughnut mode for single-beam trapping is more efficient in the axial direction.

Coherent kaleidoscope II. Experimental observations of sibling-spot formation in hollow and solid, square and rectangular waveguides.

Experimental observations of the output field of the coherent kaleidoscope, a strongly overmoded rectangular optical waveguide, are presented. The detailed study, over a wide range of guide and input beam conditions, shows that the numerical results presented previously, which predicted highly ordered arrays of bright spots for certain conditions, are well confirmed in reality. While most experiments were done with longer-wavelength infrared radiation, a possible application to an optical-fiber coupler has been examined with visible light.

Transmission line model of substrate effects on capacitive mesh couplers.

To use a transmission line model to calculate the optical properties of a thin metal mesh on a dielectric substrate, account must be taken not only of the different propagation conditions within the substrate and of Fabry-Perot resonances due to reflections at the second surface, but also of the effect of the dielectric on the capacitive component of the equivalent reactance of the mesh. Only when this effect is accounted for, which can be done using a simple formula based on Babinet's principle, is good agreement obtained with experimental measurements.