RESUMO
Jet engines are important contributors to global CO2 emissions and release enormous numbers of ultrafine particles into different layers of the atmosphere. As a result, aviation emissions are affecting atmospheric chemistry and promote contrail and cloud formation with impacts on earth's radiative balance and climate. Furthermore, the corelease of nanoparticles together with carcinogenic polycyclic aromatic hydrocarbons (PAHs) affects air quality at airports. We studied exhausts of a widely used turbofan engine (CFM56-7B26) operated at five static thrust levels (idle, 7, 30, 65, and 85%) with conventional Jet A-1 fuel and a biofuel blend composed of hydro-processed esters and fatty acids (HEFA). The particles released, the chemical composition of condensable material, and the genotoxic potential of these exhausts were studied. At ground operation, particle number emissions of 3.5 and 0.5 × 1014 particles/kg fuel were observed with highest genotoxic potentials of 41300 and 8800 ng toxicity equivalents (TEQ)/kg fuel at idle and 7% thrust, respectively. Blending jet fuel with HEFA lowered PAH and particle emissions by 7-34% and 65-67% at idle and 7% thrust, respectively, indicating that the use of paraffin-rich biofuels is an effective measure to reduce the exposure of airport personnel to nanoparticles coated with genotoxic PAHs (Trojan horse effect).
Assuntos
Poluentes Atmosféricos , Hidrocarbonetos , Nanopartículas , Hidrocarbonetos Policíclicos Aromáticos , Emissões de Veículos/análise , Material Particulado/análise , Aeronaves , Dano ao DNA , Poluentes Atmosféricos/análiseRESUMO
Exposure of humans to chlorinated paraffins (CPs) and chlorinated olefins (COs) can occur via contact with CP-containing plastic materials. Such plastic materials can contain short-chain CPs (SCCPs), which are regulated as persistent organic pollutants (POPs) under the Stockholm Convention since 2017. Municipal wastewater treatment plants (WWTP) collect effluents of thousands of households and their sludge is a marker for CP exposure. We investigated digested sewage sludge collected in the years 1993, 2002, 2007, 2012, and 2020 from a Swiss WWTP serving between 20000 and 23000 inhabitants. A liquid chromatography mass spectrometry (R > 100000) method, in combination with an atmospheric pressure chemical ionization source (LC-APCI-MS), was used to detect mass spectra of CPs and olefinic side products. A R-based automated spectra evaluation routine (RASER) was applied to search for â¼23000 ions whereof â¼6000 ions could be assigned to CPs, chlorinated mono- (COs), di- (CdiOs) and tri-olefins (CtriOs). Up to 230 CP-, 120 CO-, 50 CdiO- and 20 CtriO-homologues could be identified in sludge. Characteristic fingerprints were deduced describing C- and Cl-homologue distributions, chlorine- (nCl) and carbon- (nC) numbers of CPs and COs. In addition, proportions of saturated and unsaturated material were determined together with proportions of different chain length classes including short- (SC), medium- (MC), long- (LC) and very long-chain (vLC) material. A substantial reduction of SCCPs of 84% was observed from 1993 to 2020. Respective levels of MCCPs, LCCPs and vLCCPs decreased by 61, 69 and 58%. These trends confirm that banned SCCPs and non-regulated CPs are present in WWTP sludge and higher-chlorinated SCCPs were replaced by lower chlorinated MCCPs. Combining high-resolution mass spectrometry with a selective and fast data evaluation method can produce characteristic fingerprints of sewage sludge describing the long-term trends in a WWTP catchment area.
Assuntos
Hidrocarbonetos Clorados , Purificação da Água , Humanos , Hidrocarbonetos Clorados/análise , Esgotos/análise , Parafina/análise , Suíça , Monitoramento Ambiental/métodos , Halogênios/análise , Íons/análise , ChinaRESUMO
Chlorinated paraffins (CPs) are complex mixtures consisting of various C homologues (nC ≈ 10-30) and Cl homologues (nCl ≈ 2-20). Technical CP mixtures are produced on a large scale (>106 t/y) and are widely used such as plasticizers in plastic and coolants in metalwork. Since 2017, short-chain CPs (C10-C13) are classified as persistent organic pollutants (POPs) by the Stockholm Convention but longer-chain CPs are not regulated. Analysis of technical CP mixtures is challenging because they consist of hundreds of homologues and millions of constitutional isomers and stereoisomers. Furthermore, such mixtures can also contain byproducts and transformation products such as chlorinated olefins (COs). We applied a liquid-chromatography method coupled to an atmospheric pressure chemical ionization technique with a high-resolution mass detector (LC-APCI-Orbitrap-MS) to study CP and CO homologues in two plastic materials. Respective mass spectra can contain up to 23,000 signals from 1320 different C-Cl homologue classes. The R-based automated spectra evaluation routine (RASER) was developed to efficiently search for characteristic ions in these complex mass spectra. With it, the time needed to evaluate such spectra was reduced from weeks to hours, compared to manual data evaluation. Unique sets of homologue distributions could be obtained from the two plastic materials. CPs were found together with their transformation products, the chlorinated mono-olefins (COs), di-olefins (CdiOs), and tri-olefins (CtriOs) in both plastic materials. Based on these examples, it can be shown that RASER is an efficient and selective tool for evaluating high-resolution mass spectra of CP mixtures containing hundreds of homologues.
Assuntos
Hidrocarbonetos Clorados , Parafina , Alcenos/análise , China , Misturas Complexas/análise , Monitoramento Ambiental/métodos , Hidrocarbonetos Clorados/análise , Parafina/análise , Parafina/química , Poluentes Orgânicos Persistentes , Plastificantes/análise , PlásticosRESUMO
Transformation studies of chlorinated paraffins (CPs) and the effects of CP transformation products on humans, biota and environment are rare. The focus here is on hydroxylation reactions. As for polyhalogenated persistent organic pollutants (POPs) in general, hydroxylation reactions convert lipophilic material to more polar compounds with increased mobility. We investigated the in-vitro transformation of single-chain CP-mixtures to hydroxylated products with the dehalogenase LinB from Sphingobium indicum. C11-, C12- and C13-single-chain CP-homologues were exposed to LinB and mono-hydroxylated (CP-ols) and di-hydroxylated (CP-diols) transformation products were formed. Liquid-chromatography coupled to mass-spectrometry (LC-MS) was used to detect hydroxylated products and to separate them from the starting material. The presented data can be used to identify these CP-ol and CP-diol homologues in other samples. Hydroxylated products had lower chlorination degrees (nCl) than respective CP-starting-materials. Reactive and persistent CP-material was found in each homologue group. Reactive material is converted within hours by LinB, while more persistent CPs are transformed within days. Homologue-specific kinetic models were established to simulate the stepwise hydroxylation of persistent CPs to mono- and di-hydroxylated products. First-order rate constants for the formation of CP-ols (k1) and CP-diols (k2) were deduced for different homologues. Lower-chlorinated CP-ols did not accumulate to large extent and were transformed quickly to CP-diols, while higher-chlorinated CP-ols and -diols both accumulated. By enzymatic transformation of single-chain CPs with LinB, we synthesized unique sets of mono- and di-hydroxylated materials, which can be used as analytical standards and as starting materials for metabolic, toxicity and environmental fate studies.
Assuntos
Hidrocarbonetos Clorados , Sphingomonadaceae , Monitoramento Ambiental , Halogenação , Humanos , Hidrocarbonetos Clorados/análise , Cinética , Parafina/análiseRESUMO
Technical chlorinated paraffins (CPs) are produced via radical chlorination of n-alkane feedstocks with different carbon chain-lengths (â¼C10-C30). Short-chain CPs (SCCPs, C10-C13) are classified as persistent organic pollutants (POPs) under the Stockholm Convention. This regulation has induced a shift to use longer-chain CPs as substitutes. Consequently, medium-chain (MCCPs, C14-C17) and long-chain (LCCPs, C>17) CPs have become dominant homologues in recent environmental samples. However, no suitable LCCP-standard materials are available. Herein, we report on the chemical synthesis of single-chain C18-CP-materials, starting with a pure n-alkane and sulfuryl chloride (SO2Cl2). Fractionation of the crude product by normal-phase liquid-chromatography and pooling of suitable fractions yielded in four C18-CP-materials with different chlorination degrees (mCl,EA = 39-52%). In addition, polar side-products, tentatively identified as sulfite-, sulfate- and bis-sulfate-diesters, were separated from CPs. The new single-chain materials were characterized by LC-MS, 1H-NMR and EA. LC-MS provided Relative retention times for different C18-CP homologues and side-products. Mathematical deconvolution of full-scan mass spectra revealed the presence of chloroparaffins (57-93%) and chloroolefins (COs, 7-26%) in the four single-chain C18-CP-materials. Homologue distributions and chlorination degrees were deduced for CPs and COs. 1H-NMR revealed chemical shift ranges of mono-chlorinated (δ = 3.2-5.3 ppm) and non-chlorinated (δ = 1.0-3.2 ppm) hydrocarbon moieties. The synthesized C18-single-chain standard materials and respective spectroscopic data are useful to identify and quantify LCCPs in various materials and environmental samples. CP- and CO-distributions resemble the ones of existing SCCP and MCCP reference materials and technical mixtures. Furthermore, these materials now allow specific studies on the environmental fate and the transformation of long-chain chloroparaffins and chloroolefins.
Assuntos
Hidrocarbonetos Clorados , China , Monitoramento Ambiental , Halogenação , Hidrocarbonetos Clorados/análise , Espectrometria de Massas , Parafina/análiseRESUMO
Structure, reactivity and physico-chemical properties of polyhalogenated compounds determine their up-take, transport, bio-accumulation, transformation and toxicity and their environmental fate. In technical mixtures of chlorinated paraffins (CPs), these properties are distributed due to the presence of thousands of homologues. We hypothesized that roles of CP dehalogenation reactions, catalyzed by the haloalkane dehalogenase LinB, depend on structural properties of the substrates, e.g. chlorination degree and carbon-chain length. We exposed mixtures of chlorinated undecanes, dodecanes and tridecanes in-vitro to LinB from Sphingobium Indicum bacteria. These single-chain CP-materials also contain small amounts of chlorinated olefins (COs), which can be distinct by mathematical deconvolution of respective mass-spectra. With this procedure, we obtained homologue-specific transformation kinetics of substrates differing in saturation degree, chlorination degree and carbon chain-length. For all homologues, two-stage first-order kinetic models were established, which described the faster conversion of reactive material and the slower transformation of more persistent material. Half-lifes of 0.5-3.2 h and 56-162 h were determined for more reactive and more persistent CP-material. Proportions of persistent material increased steadily from 18 to 67% for lower (Cl6) to higher (Cl11) chlorinated paraffins and olefins. Conversion efficiencies decreased with increasing chlorination degree from 97 to 70%. Carbon-chain length had only minor effects on transformation rates. Hence, the conversion was faster and more efficient for lower-chlorinated material, and slower for higher-chlorinated and longer-chained CPs and COs. Current legislation has banned short-chain chlorinated paraffins (SCCPs) and forced a transition to longer-chain CPs. This may be counterproductive with regard to enzymatic transformation with LinB.
Assuntos
Hidrocarbonetos Clorados , Sphingomonadaceae , Alcenos , Monitoramento Ambiental , Hidrocarbonetos Clorados/análise , Cinética , Parafina/análise , Sphingomonadaceae/genéticaRESUMO
Hexabromocyclododecanes (HBCDs) were used as flame-retardants until their ban in 2013. Among the 16 stereoisomers known, ε-HBCD has the highest symmetry. This makes ε-HBCD an interesting substrate to study the selectivity of biotransformations. We expressed three LinA dehydrohalogenase enzymes in E. coli bacteria, two wild-type, originating from Sphingobium indicum B90A bacteria and LinATM, a triple mutant of LinA2, with mutations of L96C, F113Y and T133 M. These enzymes are involved in the hexachlorocyclohexane (HCH) metabolism, specifically of the insecticide γ-HCH (Lindane). We studied the reactivity of those eight HBCD stereoisomers found in technical HBCD. Furthermore, we compared kinetics and selectivity of these LinA variants with respect to ε-HBCD. LC-MS data indicate that all enzymes converted ε-HBCD to pentabromocyclododecenes (PBCDens). Transformations followed Michaelis-Menten kinetics. Rate constants kcat and enzyme specificities kcat/KM indicate that ε-HBCD conversion was fastest and most specific with LinA2. Only one PBCDen stereoisomer was formed by LinA2, while LinA1 and LinATM produced mixtures of two PBCDE enantiomers at three times lower rates than LinA2. In analogy to the biotransformation of (-)ß-HBCD, with selective conversion of dibromides in R-S-configuration, we assume that 1E,5S,6R,9S,10R-PBCDen is the ε-HBCD transformation product from LinA2. Implementing three amino acids of the LinA1 substrate-binding site into LinA2 resulted in a triple mutant with similar kinetics and product specificity like LinA1. Thus, point-directed mutagenesis is an interesting tool to modify the substrate- and product-specificity of LinA enzymes and enlarge their scope to metabolize other halogenated persistent organic pollutants regulated under the Stockholm Convention.
Assuntos
Retardadores de Chama , Hidrocarbonetos Bromados , Sphingomonadaceae , Biotransformação , Escherichia coli , Hexaclorocicloexano , Sphingomonadaceae/genética , EstereoisomerismoRESUMO
Short-chain chlorinated paraffins (SCCPs) are listed as persistent organic pollutants (POPs) under the Stockholm Convention. Such substances are toxic, bioaccumulating, transported over long distances and degrade slowly in the environment. Certain bacterial strains of the Sphingomonadacea family are able to degrade POPs, such as hexachlorocyclohexanes (HCHs) and hexabromocyclododecanes (HBCDs). The haloalkane dehalogenase LinB, expressed in certain Sphingomonadacea, is able to catalyze the transformation of haloalkanes to hydroxylated compounds. Therefore, LinB is a promising candidate for conversion of SCCPs. Hence, a mixture of chlorinated tridecanes was exposed in vitro to LinB, which was obtained through heterologous expression in Escherichia coli. Liquid chromatography mass spectrometry (LC-MS) was used to analyze chlorinated tridecanes and their transformation products. A chloride-enhanced soft ionization method, which favors the formation of chloride adducts [M+Cl]- without fragmentation, was applied. Mathematical deconvolution was used to distinguish interfering mass spectra of paraffinic, mono-olefinic and di-olefinic compounds. Several mono- and di-hydroxylated products including paraffinic, mono-olefinic and di-olefinic compounds were found after LinB exposure. Mono- (rt = 5.9-6.9 min) and di-hydroxylated (rt = 3.2-4.5 min) compounds were separated from starting material (rt = 7.7-8.5 min) by reversed phase LC. Chlorination degrees of chlorinated tridecanes increased during LinB-exposure from nCl = 8.80 to 9.07, indicating a preferential transformation of lower chlorinated (Cl<9) tridecanes. Thus, LinB indeed catalyzed a dehalohydroxylation of chlorinated tridecanes, tridecenes and tridecadienes. The observed hydroxylated compounds are relevant CP transformation products whose environmental and toxicological effects should be further investigated.
Assuntos
Poluentes Ambientais/análise , Hidrocarbonetos Clorados/análise , Hidrolases/química , Parafina/análise , Biocatálise , Monitoramento Ambiental/métodos , Escherichia coli/enzimologia , Escherichia coli/genética , Halogenação , Hexaclorocicloexano/análise , Hidrocarbonetos Bromados/análise , Hidrolases/isolamento & purificação , Hidroxilação , Sphingomonadaceae/enzimologia , Sphingomonadaceae/genéticaRESUMO
The photolytic chlorination of n-alkanes in presence of sulfuryl chloride (SO2Cl2) was explored to produce new standard materials. Five mixtures of chlorinated tetradecanes were synthesized with chlorination degrees (mCl,EA) varying from 43.7% to 59.4% (m/m) based on elemental analysis. Chlorine-enhanced negative chemical ionization mass spectrometry (CE-NCI-MS) forcing the formation of chloride-adduct ions [M+Cl]- was applied to characterize these materials which all contained tetra-to deca-chlorinated paraffins. Deconvolution of respective mass spectra revealed the presence of chlorinated olefins (COs). CO levels were highest in materials, which were exposed longest. All synthesized materials also contained two classes of polar impurities, tentatively assigned as sulfite- and sulfate-diesters with molecular formulas of C14H28-xO3SClx (x = 1-4) and C14H28-xO4SClx (x = 3-6), respectively. MS data were in accordance with the proposed structures but further work is needed to deduce their constitutions. These compounds are thermolabile and were not detected with GC-MS methods. We could remove these sulfur-containing impurities from the CPs with normal-phase liquid chromatography. In conclusion, single-chain CP materials were synthesized via chlorination of n-alkanes with sulfuryl chloride, but these materials contained reactive side products which should be removed to gain non-reactive and stable CP materials suitable as standards and for fate and toxicity studies.
Assuntos
Hidrocarbonetos Clorados/química , Alcanos , Alcenos , Cloro/química , Cromatografia Gasosa-Espectrometria de Massas/métodos , Halogenação , Hidrocarbonetos Clorados/análise , Espectrometria de Massas/métodos , Parafina/análiseRESUMO
Short-chain chlorinated paraffins (SCCPs) are polyhalogenated hydrocarbons as are hexachlorocyclohexanes (HCHs) and hexabromocyclododecanes (HBCDs). They all have been classified as persistent organic pollutants (POPs) under the UN Stockholm Convention. Per se such compounds are transformed slowly in the environment, transported over long distances and accumulate in biota. Several Sphingomonadacea strains isolated from HCH dump sites have evolved to express enzymes that can transform HCHs and HBCDs. We hypothesized that LinA2, a dehydrohalogenase expressed in such bacteria, may also transform CPs to chlorinated olefins (COs). Three mixtures of penta- to deca-chlorinated undecanes (C11), dodecanes (C12) and tridecanes (C13) were exposed to LinA2. High-resolution full-scan mass spectra (Râ¼8'000) of CPs and COs were obtained applying a soft ionization method, enhancing chloride-adduct [M+Cl]- formation. A mathematical deconvolution procedure was used to separate interfering spectra to verify that LinA2 indeed catalyzed the conversion of CPs to COs. About 20-40% of the material was transformed in 24â¯h, about 50-70% was converted in 200â¯h. A bimodal first-order kinetic model could describe transformations of reactive and persistent CPs. Under the given conditions reactive CPs (τ1/2â¯=â¯1.4-6.9â¯h) were converted 30 to 190-times faster than the persistent ones (τ1/2â¯=â¯150-260â¯h). Proportions of persistent isomers (pp) varied from 60 to 80%. Lower chlorinated homologues contained higher proportions of persistent isomers. In conclusion, SCCP mixtures contain both, material that is readily converted by LinA2, and persistent material that is not or only slowly transformed.
Assuntos
Biotransformação/genética , Monitoramento Ambiental/métodos , Halogenação/genética , Hexaclorocicloexano/química , Hidrocarbonetos Bromados/química , Hidrolases/química , Parafina/químicaRESUMO
The fast replacement of traditional gasoline port-fuel injection technology with gasoline direct-injection (GDI) vehicles is expected to have a substantial impact on urban air quality. Herein we report on effects of four prototype gasoline particle filters (GPFs) on exhausts of a 1.6 L Euro-5 GDI vehicle. Two noncoated and two filters with catalytic coatings were investigated. These filters, on average, lowered PN emissions 4-7-fold to 4.0-6.8 × 1011 particles/km. Genotoxic PAHs were lowered 2-5-fold too with GPF-1-3, with GPF-1 having the highest efficiency, 79% and resulting in 45 ng toxic equivalent concentration (TEQ)/km. Thus, particle filtration efficiencies and reduction of the genotoxic potentials are correlated. GPF-4 showing the poorest particle filtration efficiency (66-78%) also released exhausts with highest genotoxic potential of 240-530 ng TEQ/km. We recently reported particle-number (PN) emissions of four generations of GDI vehicles (Euro-3 to Euro-6) which released, on average, 2.5 × 1012 ± 1.8 × 1012 particles/km exceeding the current European limit of 6.0 × 1011 particle/km. Thus, the implementation of filters to GDI vehicles requires best-available technology (BAT) with PN efficiencies >98% and catalytic activity, to avoid store-and-release of genotoxic PAHs. In-series applications of BAT-filters to GDI vehicles can lower genotoxic PAHs and soot nanoparticles.
Assuntos
Poluentes Atmosféricos , Nanopartículas , Dano ao DNA , Gasolina , Material Particulado , Emissões de VeículosRESUMO
LinB is a haloalkane dehalogenase found in Sphingobium indicum B90A, an aerobic bacterium isolated from contaminated soils of hexachlorocyclohexane (HCH) dumpsites. We showed that this enzyme also converts hexabromocyclododecanes (HBCDs). Here we give new insights in the kinetics and stereochemistry of the enzymatic transformation of δ-HBCD, which resulted in the formation of two pentabromocyclododecanols (PBCDols) as first- (P1δ, P2δ) and two tetrabromocyclododecadiols (TBCDdiols) as second-generation products (T1δ, T2δ). Enzymatic transformations of δ-HBCD, α1-PBCDol, one of the transformation products, and α2-PBCDol, its enantiomer, were studied and modeled with Michaelis-Menten (MM) kinetics. Respective MM-parameters KM, vmax, kcat/KM indicated that δ-HBCD is the best LinB substrate followed by α2- and α1-PBCDol. The stereochemistry of these transformations was modeled in silico, investigating respective enzyme-substrate (ES) and enzyme-product (EP) complexes. One of the four predicted ES-complexes led to the PBCDol product P1δ, identical to α2-PBCDol with the 1R,2R,5S,6R,9R,10S-configuration. An SN2-like substitution of bromine at C6 of δ-HBCD by Asp-108 of LinB and subsequent hydrolysis of the alkyl-enzyme led to α2-PBCDol. Modeling results further indicate that backside attacks at C1, C9 and C10 are reasonable too, selectively binding leaving bromide ions in a halide pocket found in LinB. Docking with α2-PBCDol, also allowed productive enzyme binding. A TBCD-1,5-diol with the 1S,2S,5R,6R,9S,10R-configuration is the predicted second-generation product T1δ. In conclusion, in vitro- and in silico findings now allow a detailed description of step-wise enzymatic dehalohydroxylation reactions of δ-HBCD to specific PBCDols and TBCDdiols at Å-resolution and predictions of their stereochemistry.
Assuntos
Simulação por Computador/estatística & dados numéricos , Hidrocarbonetos Bromados/química , Catálise , Cinética , EstereoisomerismoRESUMO
Chlorinated paraffins (CPs) are high production volume chemicals widely used as additives in metal working fluids. Thereby, CPs are exposed to hot metal surfaces which may induce degradation processes. We hypothesized that the elimination of hydrochloric acid would transform CPs into chlorinated olefins (COs). Mass spectrometry is widely used to detect CPs, mostly in the selected ion monitoring mode (SIM) evaluating 2-3 ions at mass resolutions R < 20'000. This approach is not suited to detected COs, because their mass spectra strongly overlap with CPs. We applied a mathematical deconvolution method based on full-scan MS data to separate interfered CP/CO spectra. Metal drilling indeed induced HCl-losses. CO proportions in exposed mixtures of chlorotridecanes increased. Thermal exposure of chlorotridecanes at 160, 180, 200 and 220 °C also induced dehydrohalogenation reactions and CO proportions also increased. Deconvolution of respective mass spectra is needed to study the CP transformation kinetics without bias from CO interferences. Apparent first-order rate constants (kapp) increased up to 0.17, 0.29 and 0.46 h-1 for penta-, hexa- and heptachloro-tridecanes exposed at 220 °C. Respective half-life times (τ1/2) decreased from 4.0 to 2.4 and 1.5 h. Thus, higher chlorinated paraffins degrade faster than lower chlorinated ones. In conclusion, exposure of CPs during metal drilling and thermal treatment induced HCl losses and CO formation. It is expected that CPs and COs are co-released from such processes. Full-scan mass spectra and subsequent deconvolution of interfered signals is a promising approach to tackle the CP/CO problem, in case of insufficient mass resolution.
Assuntos
Alcenos/síntese química , Hidrocarbonetos Clorados/química , Parafina/química , Monitoramento Ambiental/métodos , Temperatura Alta , Hidrocarbonetos Clorados/análise , Cinética , Espectrometria de Massas/métodos , Metalurgia , Parafina/análiseRESUMO
Bacterial evolution has resulted in the appearance of several Sphingomonadacea strains that gained the ability to metabolize hexachlorocyclohexanes (HCHs). HCHs have been widely used as pesticides but were banned under the Stockholm Convention on persistent organic pollutants (POPs) in 2009. Here we present evidence for bacterial transformation reactions of hexabromocyclododecanes (HBCDs), which are structurally related to HCHs. HBCDs were used as flame retardants. They are now also considered as POPs and their production and use is restricted since 2013. Racemic α-, ß-, and γ-HBCDs and their mixture were exposed to Sphingobium chinhatense IP26 in resting cell assays in parallel to ß-HCH. All HBCD stereoisomers were converted with (-)ß-HBCD being the best and both α-HBCD enantiomers the poorest substrates. HBCD conversion rates were 27-430 times slower than that of ß-HCH. Three generations of hydroxylated transformation products were observed, 7 pentabromocyclododecanol isomers (PeBCD-ols), 11 tetrabromocyclododecadiols (TeBCD-diols) and 3 tribromocyclododecatriols (TrBCD-triols). The conversion of (+)α-, (-)ß- and (-)γ-HBCD was faster than those of their enantiomers. Therefore the respective enantiomeric excess increased to 3 ± 1%, 36 ± 1% and 6 ± 2% during 48 h of bacterial exposure. PeBCD-ols appeared first, followed by TeBCD-diols and TrBCD-triols indicating stepwise hydrolytic dehalogenation reactions. In conclusion, severe HCH pollution at geographically distinct dumpsites triggered bacterial evolution to express enzymes transforming such compounds. We used S. chinhatense IP26 bacteria to transform structurally related HBCDs, also regulated under the Stockholm Convention. Such bacteria might be useful for bioremediation but the toxicity of the numerous transformation products observed must be assessed in advance.
Assuntos
Poluentes Ambientais/metabolismo , Retardadores de Chama/metabolismo , Hexaclorocicloexano/metabolismo , Hidrocarbonetos Bromados/metabolismo , Sphingomonadaceae/metabolismo , Biodegradação Ambiental , Biotransformação , Poluentes Ambientais/análise , Retardadores de Chama/análise , Halogenação , Hexaclorocicloexano/análise , Hidrocarbonetos Bromados/análise , EstereoisomerismoRESUMO
Chlorinated paraffins (CPs) are high production volume chemicals and ubiquitous environmental contaminants. CPs are produced and used as complex mixtures of polychlorinated n-alkanes containing thousands of isomers, leading to demanding analytical challenges. Due to their high degree of chlorination, CPs have highly complex isotopic mass patterns that often overlap, even when applying high resolution mass spectrometry. This is further complicated in the presence of degradation products such as chlorinated alkenes (CP-enes). CP-enes are formed by dehydrochlorination of CPs and are expected thermal degradation products in some applications of CPs, for example, as metal working fluids. A mathematical method is presented that allows deconvolution of the strongly interfered measured isotope clusters into linear combinations of isotope clusters of CPs and CP-enes. The analytical method applied was direct liquid injection into an atmospheric pressure chemical ionization source, followed by quadrupole time-of-flight mass spectrometry (APCI-qTOF-MS), operated in full scan negative ion mode. The mathematical deconvolution method was successfully applied to a thermally aged polychlorinated tridecane formulation (Cl5-Cl9). Deconvolution of mass patterns allowed quantifying fractions of interfering CPs and CP-enes. After exposure to 220 °C for 2, 4, 8, and 24 h, fractions of CP-enes within the respective interfering clusters increased from 0-3% at 0 h up to 37-44% after 24 h. It was shown that thermolysis of CPs follows first-order kinetics. The presented deconvolution method allows CP degradation studies with mass resolution lower than 20000 and is therefore a good alternative when higher resolution is not available.
RESUMO
Bioethanol as an alternative fuel is widely used as a substitute for gasoline and also in gasoline direct injection (GDI) vehicles, which are quickly replacing traditional port-fuel injection (PFI) vehicles. Better fuel efficiency and increased engine power are reported advantages of GDI vehicles. However, increased emissions of soot-like nanoparticles are also associated with GDI technology with yet unknown health impacts. In this study, we compare emissions of a flex-fuel Euro-5 GDI vehicle operated with gasoline (E0) and two ethanol/gasoline blends (E10 and E85) under transient and steady driving conditions and report effects on particle, polycyclic aromatic hydrocarbon (PAH), and alkyl- and nitro-PAH emissions and assess their genotoxic potential. Particle number emissions when operating the vehicle in the hWLTC (hot started worldwide harmonized light-duty vehicle test cycle) with E10 and E85 were lowered by 97 and 96% compared with that of E0. CO emissions dropped by 81 and 87%, while CO2 emissions were reduced by 13 and 17%. Emissions of selected PAHs were lowered by 67-96% with E10 and by 82-96% with E85, and the genotoxic potentials dropped by 72 and 83%, respectively. Ethanol blending appears to reduce genotoxic emissions on this specific flex-fuel GDI vehicle; however, other GDI vehicle types should be analyzed.
Assuntos
Gasolina , Emissões de Veículos , Nanopartículas , Hidrocarbonetos Policíclicos Aromáticos , FuligemRESUMO
Iron-catalyzed diesel particle filters (DPFs) are widely used for particle abatement. Active catalyst particles, so-called fuel-borne catalysts (FBCs), are formed in situ, in the engine, when combusting precursors, which were premixed with the fuel. The obtained iron oxide particles catalyze soot oxidation in filters. Iron-catalyzed DPFs are considered as safe with respect to their potential to form polychlorinated dibenzodioxins/furans (PCDD/Fs). We reported that a bimetallic potassium/iron FBC supported an intense PCDD/F formation in a DPF. Here, we discuss the impact of fatty acid methyl ester (FAME) biofuel on PCDD/F emissions. The iron-catalyzed DPF indeed supported a PCDD/F formation with biofuel but remained inactive with petroleum-derived diesel fuel. PCDD/F emissions (I-TEQ) increased 23-fold when comparing biofuel and diesel data. Emissions of 2,3,7,8-TCDD, the most toxic congener [toxicity equivalence factor (TEF) = 1.0], increased 90-fold, and those of 2,3,7,8-TCDF (TEF = 0.1) increased 170-fold. Congener patterns also changed, indicating a preferential formation of tetra- and penta-chlorodibenzofurans. Thus, an inactive iron-catalyzed DPF becomes active, supporting a PCDD/F formation, when operated with biofuel containing impurities of potassium. Alkali metals are inherent constituents of biofuels. According to the current European Union (EU) legislation, levels of 5 µg/g are accepted. We conclude that risks for a secondary PCDD/F formation in iron-catalyzed DPFs increase when combusting potassium-containing biofuels.
Assuntos
Biocombustíveis/análise , Filtração/instrumentação , Furanos/química , Gasolina/análise , Ferro/química , Dibenzodioxinas Policloradas/análogos & derivados , Poluentes Atmosféricos/análise , Catálise , Cloro/química , Meio Ambiente , Oxirredução , Dibenzodioxinas Policloradas/química , Emissões de Veículos/análiseRESUMO
LinA2, a bacterial enzyme expressed in various Sphingomonadaceae, catalyzes the elimination of HCl from hexachlorocyclohexanes (HCHs) and, as discussed here, the release of HBr from certain hexabromocyclododecanes (HBCDs). Both classes of compounds are persistent organic pollutants now regulated under the Stockholm Convention. LinA2 selectively catalyzes the transformation of ß-HBCDs; other stereoisomers like α-, γ-, and δ-HBCDs are not converted. The transformation of (-)ß-HBCD is considerably faster than that of its enantiomer. Here, we present the XRD crystal structure of 1E,5S,6S,9R,10S-pentabromocyclododecene (PBCDE) and demonstrate that its enantiomer with the 1E,5R,6R,9S,10R-configuration is the only metabolite formed during LinA2-catalyzed dehydrobromination of (-)ß-HBCD. Formation of this product can be rationalized by HBr elimination at C5 and C6. A reasonable enzyme-substrate complex with the catalytic dyad His-73 and Asp-25 approaching the hydrogen at C6 and a cationic pocket of Lys-20, Try-42 and Arg-129 binding the leaving bromine at C5 was found from in silico docking experiments. A second PBCDE of yet unknown configuration was obtained from (+)ß-HBCD. We predicted its stereochemistry to be 1E,5S,6S,9S,10R-PBCDE from docking experiments. The enzyme-substrate complex obtained from LinA2 and an activated conformation of (+)ß-HBCD allows the HBr elimination at C9 and C10 leading to the predicted product. Both modeled enzyme-substrate complexes are in line with 1,2-diaxial HBr eliminations. In conclusion, LinA2, a bacterial enzyme of the HCH-degrading strain Sphingobium indicum B90A was able to stereoselectively convert ß-HBCDs. Configurations of both PBCDE metabolites were predicted by molecular docking experiments and confirmed in one case by XRD data.
Assuntos
Proteínas de Bactérias/metabolismo , Hidrocarbonetos Bromados/química , Hidrocarbonetos Bromados/metabolismo , Sphingomonadaceae/enzimologia , Catálise , Hexaclorocicloexano/metabolismo , Conformação Molecular , EstereoisomerismoRESUMO
Metal-containing fuel additives catalyzing soot combustion in diesel particle filters are used in a widespread manner, and with the growing popularity of diesel vehicles, their application is expected to increase in the near future. Detailed investigation into how such additives affect exhaust toxicity is therefore necessary and has to be performed before epidemiological evidence points towards adverse effects of their application. The present study investigates how the addition of an iron-based fuel additive (Satacen®3, 40 ppm Fe) to low-sulfur diesel affects the in vitro cytotoxic, oxidative, (pro-)inflammatory, and mutagenic activity of the exhaust of a passenger car operated under constant, low-load conditions by exposing a three-dimensional model of the human airway epithelium to complete exhaust at the air-liquid interface. We could show that the use of the iron catalyst without and with filter technology has positive as well as negative effects on exhaust toxicity compared to exhaust with no additives: it decreases the oxidative and, compared to a non-catalyzed diesel particle filter, the mutagenic potential of diesel exhaust, but increases (pro-)inflammatory effects. The presence of a diesel particle filter also influences the impact of Satacen®3 on exhaust toxicity, and the proper choice of the filter type to be used is of importance with regards to exhaust toxicity. Figure á .
Assuntos
Exposição Ambiental/efeitos adversos , Exposição Ambiental/análise , Ferro/química , Pulmão/citologia , Pulmão/efeitos dos fármacos , Emissões de Veículos/toxicidade , Filtros de Ar , Catálise , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Humanos , Inflamação/induzido quimicamente , Inflamação/imunologia , Inflamação/metabolismo , Pulmão/imunologia , Pulmão/metabolismo , Testes de Mutagenicidade , Mutagênicos/análise , Mutagênicos/toxicidade , Estresse Oxidativo/efeitos dos fármacos , Enxofre/química , Emissões de Veículos/análiseRESUMO
With the growing number of new exhaust after-treatment systems, fuels and fuel additives for internal combustion engines, efficient and reliable methods for detecting exhaust genotoxicity and mutagenicity are needed to avoid the widespread application of technologies with undesirable effects toward public health. In a commonly used approach, organic extracts of particulates rather than complete exhaust is used for genotoxicity/mutagenicity assessment, which may reduce the reliability of the results. In the present study, we assessed the mutagenicity and the genotoxicity of complete diesel exhaust compared to an organic exhaust particle extract from the same diesel exhaust in a bacterial and a eukaryotic system, that is, a complex human lung cell model. Both, complete exhaust and organic extract were found to act mutagenic/genotoxic, but the amplitudes of the effects differed considerably. Furthermore, our data indicate that the nature of the mutagenicity may not be identical for complete exhaust and particle extracts. Because in addition, differences between the responses of the different biological systems were found, we suggest that a comprehensive assessment of exhaust toxicity is preferably performed with complete exhaust and with biological systems representative for the organisms and organs of interest (i.e., human lungs) and not only with the Ames test.