Arithmetic vs. Weighted Means in Fish Fillets Mercury Analyses.

Mercury (Hg) analyses in species of fish are performed for two reasons: (1) to safeguard human health; and (2) to assess environmental quality, since different environmental changes may increase the Hg concentrations in fish. These analyses are important since both natural and human activities can increase these Hg concentrations, which can vary extensively, depending on the species, age and catching location. Hg-contaminated fish or other marine foodstuffs can be only detected by chemical analysis. If the aim of Hg analysis is to protect the health of marine food consumers, researcher workers must consider the location where the fish were caught and interpret the results accordingly. Health and environmental officials must appreciate that in specific places, local people may have a daily diet consisting entirely of fish or other marine foods, and these individuals should not be exposed to high concentrations of Hg. Regional and national health and environmental officials should follow the recent guidance of international organizations when drawing their final conclusions about whether the products are safe or unsafe to eat. Correct statistical calculations are not always carried out; so, too high Hg amounts could be presented, and fish eaters could be protected. This work has been conducted to show the differences in Hg concentrations between weighted (weighted with fish weights) and arithmetic means. Thus, the mean that is only weighted also includes the Hg content in fishes; so, the exposure to Hg can be evaluated.

Phosphorus Recovery from Sewage Sludge Using Acidithiobacilli.

Sewage sludge contains a significant amount of phosphorus (P), which could be recycled to address the global demand for this non-renewable, important plant nutrient. The P in sludge can be solubilized and recovered so that it can be recycled when needed. This study investigated the P solubilization from sewage sludge using Acidithiobacillus thiooxidans and Acidithiobacillus ferrooxidans. The experiment was conducted by mixing 10 mL of sewage sludge with 90 mL of different water/liquid medium/inoculum and incubated at 30 °C. The experiment was conducted in three semi-continuous phases by replacing 10% of the mixed incubated medium with fresh sewage sludge. In addition, 10 g/L elemental sulfur (S) was supplemented into the medium in the third phase. The pH of the A. thiooxidans and A. ferrooxidans treated sludge solutions was between 2.2 and 6.3 until day 42. In phase 3, after supplementing with S, the pH of A. thiooxidans treated sludge was reduced to 0.9, which solubilized and extracted 92% of P. We found that acidithiobacilli supplemented with S can be used to treat sludge, i.e., achieve hygienization, removal of heavy metals, and solubilization and recovery of P.

Recovery of nitrogen and phosphorus from human urine using membrane and precipitation process.

The nitrogen (N) and phosphorus (P) contents in human urine have been recovered using struvite precipitation and N-stripping techniques. Struvite precipitation technique recovers mainly phosphorus whereas N-stripping technique only recovers nitrogen. In this study, we developed an NPharvest technique which recovered both nitrogen and phosphorus separately in the same process, enabling their use independently. The technique used Ca(OH)2 to increase the pH of urine converting ammonium into NH3 gas and simultaneously precipitating P with Ca. The NH3 gas is passed through a gas permeable hydrophobic membrane (GPHM) and reacts with H2SO4 forming ammonium sulfate. Our result showed that more than 98% (w/w) of N and P can be harvested from urine in 8 h at 30 °C. The harvested ammonium sulfate contained 19% (w/w) N, and the sediment contained 1-2% (w/w) P. The extraction of N and P from 1 m3 of urine could give a profit of 1.5 €.

The effect of chlorine and combined chlorine/UV treatment on coliphages in drinking water disinfection.

Chlorine disinfection is a globally used method to ensure the safety of drinking water. However, it has not always been successful against viruses and, therefore, it is important to find new methods to disinfect water. Seventeen different coliphages were isolated from the treated municipal wastewater. These coliphages and MS2 were treated with different dosages of chlorine in drinking water, and a combined chlorine/ultraviolet irradiation treatment for the chlorine-resistant coliphages. Chlorine disinfection with 0.3-0.5 mg/L total chlorine (free Cl-dosage 0.12-0.21 mg/L) for 10 min achieved 2.5-5.7 Log10-reductions for 11 sensitive coliphages. The six most resistant coliphages showed no reduction with these chlorine concentrations. MS2 was intermediate in chlorine resistance, and thus it is not a good indicator for viruses in chlorine disinfection. In the combined treatment total chlorine of 0.05-0.25 mg/L (free Cl-dosage 0.02-0.08 mg/L) and ultraviolet irradiation (14-22 mWs/cm(2)) were more effective than chlorine alone, and 3-5 Log10-reductions were achieved for the chlorine-resistant strains. The chlorination efficiency could be increased by higher dosages and longer contact times, but this could increase the formation of disinfection by-products. Therefore, the combination treatment is a recommended disinfection method.

Reduction of phosphorus, nitrogen and microorganisms in pilot scale sand filter beds containing biotite, treating primary wastewater.

In sparsely populated areas, sand filter beds play an important role in wastewater treatment. As the need to improve the removal of nutrients increases, reactive filter materials represent one potential way to improve the reliability of current systems. We tested a pilot-scale multi-layer biotite filter for its ability to remove phosphorus, nitrogen, organic matter and enteric microorganisms with the importance of each layer in a multi-layer biotite filter being examined. In the experimental setup, the filters were fed with a raw wastewater influent mimicking the usual daily rhythm of water consumption and the reduction effects of the variable loads were examined during the experiment time of 54 weeks. It was observed that the reduction efficiency of the phosphorus was good (87%) during normal and under loading sequences but the reduction achieved for nitrogen was poor (27%). During and after overloading sequences, the phosphorus reduction was poor (46.5%) whereas the nitrogen reduction improved (to 66.7%). The reduction of organic matter was good during all sequences. The reductions of enteric microorganisms were at a level of 2-3 log10 units already after a single sand layer. For Escherichia coli, reductions of more than 5 log10 units were found after the wastewater had passed through a multilayer biotite filter during all sequences. It is concluded that the inclusion of a biotite layer improves the reliability of the filter bed. However, the proper scaling of the unit is essential in order to guarantee that the filter remains in aerobic conditions.

Sand filters for removal of microbes and nutrients from wastewater during a one-year pilot study in a cold temperate climate.

Onsite wastewater treatment systems (OWTS) are recognised as potential threats to groundwater or other water environments subject to discharged effluents. In this study, the microbiological and nutrient removal properties of three different pilot-scale sand filters (SFs) were followed over a one-year period. Moreover, a separate phosphorus removal unit was tested for six months. For the best treatment system, the average log removals were 2.2-3.5 for pathogenic human noro- and adenoviruses and 4.3-5.2 and 4.6-5.4 for indicator viruses and bacteria, respectively. The system that effectively removed microbes was also efficient at removing nutrients. However, the poorest treatment system yielded substantially lower removals. The remarkable differences noted between the studied SFs highlights the importance of construction materials and the careful planning of the filters. Moreover, seasonal conditions appear to have a clear effect on purification efficiencies, emphasising the vulnerability of these systems especially in cold climates.

Microbial reduction in wastewater treatment using Fe(3+) and Al(3+) coagulants and PAA disinfectant.

Wastewater is an important source of pathogenic enteric microorganisms in surface water and a major contaminating agent of drinking water. Although primary and secondary wastewater treatments reduce the numbers of microorganisms in wastewater, significant numbers of microbes can still be present in the effluent. The aim of this study was to test the feasibility of tertiary treatment for municipal wastewater treatment plants (WWTPs) using PIX (FeCl3) or PAX (AlCl3) coagulants and peracetic acid (PAA) the disinfectant to reduce microbial load in effluent. Our study showed that both PIX and PAX efficiently reduced microbial numbers. PAA disinfection greatly reduced the numbers of culturable indicator microorganisms (Escherichia coli, intestinal enterococci, F-specific RNA coliphages and somatic DNA coliphages). In addition, pathogenic microorganisms, thermotolerant Campylobacter, Salmonella and norovirus GI, were successfully reduced using the tertiary treatments. In contrast, clostridia, Legionella, rotavirus, norovirus GII and adenovirus showed better resistance against PAA compared to the other microorganisms. However, interpretation of polymerase chain reaction (PCR) analysis results will need further studies to clarify the infectivity of the pathogenic microbes. In conclusion, PIX and PAX flocculants followed by PAA disinfectant can be used as a tertiary treatment for municipal WWTP effluents to reduce the numbers of indicator and pathogenic microorganisms.

The survival of mycobacteria in pure human urine.

Mycobacterial pathogens can be excreted in human urine by some infected individuals. High numbers of pathogenic mycobacteria in the urine could represent a new transmission route for mycobacterial infections if the urine is used for crop fertilization. In this study, the survival of spiked Mycobacterium aurum and M. fortuitum as fast-growing mycobacteria and M. avium and M. bovis as slow-growing mycobacteria were tested in urine. The tests were conducted in fresh (<1 day old) and stored human urine (>6 months old) at temperatures of 15 and 30 °C. The results indicate that these mycobacterial strains survived less than 2 weeks in stored urine at 30 °C with a pH value of around 9.0. Mycobacteria had the longest survival time, up to 6 weeks, in fresh urine stored at 15 °C. There were negative correlations between the increase in pH and the number of spiked mycobacteria in urine. In conclusion, if human urine is to be used for fertilization, it is advisable to store it for more than 6 weeks at least at 15 °C in order to prevent survival and subsequent exposure to pathogenic mycobacteria.

Effect of temperature on survival of micro-organisms and performance of anaerobic two-stage reactors treating cattle slurry.

A short-term thermophilic treatment was conducted in order to study the survival of micro-organisms in slurry derived from a cattle farm, at temperatures of 58, 63 and 68 degrees C for 6 h. The second trial was a biogas production experiment with an anaerobic mesophilic first stage and a thermophilic second stage. The mesophilic treatment was at 38 degrees C and the second stage was conducted at 55, 58 or 65 degrees C. The results of first trial showed that survival of micro-organisms was decreased remarkably at higher temperatures in spite of the fact that during the experiment part of slurry was replaced with fresh slurry. Meanwhile, the second trial showed that optimum production ofbiogas was at 55 degrees C while the best result for hygienic control was achieved at 65 degrees C.

Co-digestion of dairy cattle slurry and industrial meat-processing by-products--effect of ultrasound and hygienization pre-treatments.

Anaerobic co-digestion of a mixture of industrial animal by-products (ABP) from meat-processing in conjunction with dairy cattle slurry (mixed in a ratio of 1:3; w.w.) was evaluated at 35 °C focusing on methane production and stabilization. Three pre-treatments were applied (1) digestion with no pre-treatment (control), (2) ultrasound, and (3) thermal hygienization (70 °C, 60 min). Methane production potentials (MPP) of the untreated, ultrasound pre-treated and hygienized feed mixtures were 300, 340, and 360 m(3) CH(4)/t volatile solids (VS) added, as determined in the batch experiments. However, the specific methane productions (SMP) achieved in reactor experiments (hydraulic retention time HRT 21 d, organic loading rate OLR 3.0±0.1 kg VS/m(3) d) were 11±2% (untreated and ultrasound pre-treated) and 22±3% (hygienized) lower than the potentials. Ultrasound with the energy input of 1000 kJ/kg total solids (TS) and hygienization of the ready-made feed were the most suitable pre-treatment modes studied.

Aerobic, thermophilic, semi-continuous treatment of cattle slurry with whey and jam.

Aerobic thermophilic treatment (ATT) of cattle slurry and industrial food waste (whey and jam) was conducted semi-continuously, with the aim of developing the ATT process. We could improve the final products in terms of hygiene, environmental effects and heat production. In addition we tried to solve the foaming problem mechanically. The trial was done by using a farm-scale bioreactor with a total volume of 12 m3 and a theoretical retention time of some 15 days. Temperature increased to 55 degrees C at the end of the trial. The process could be an efficient method for the control of foam. Using the waste food (whey and jam) improved the process.

Effect of temperature on microbial population and performance of an aerobic thermophilic reactor treating cattle slurry and waste food.

This study was carried out to quantify and identify the presence of somatic coliphages, RNA coliphages, sulphite-reducing clostridia, Clostridium tyrobutyricum or its related clostridia, faecal coliforms, enterococci and heterotrophs in a mixture of cattle slurry and waste food (whey and jam) that had undergone aerobic thermophilic treatment (ATT). We also investigated the influence of different factors, including pH, COD, temperature, odour removal, addition of waste food (whey and jam) and nitrogen losses, on the long-term ATT process. The processes were conducted semi-continuously with retention time of five days and with the waste food and slurry mixture (1:4) being added daily into the reactor. The experiments lasted seven days for each thermophilic temperature (50, 60 and 70 degrees C). Our work showed that, at the higher temperature of the ATT operation, the number of microorganisms declined much more rapidly than at the lower temperature and the final product was hygienically safe. The use of waste food (whey and jam) was beneficial because it buffered pH.

Microbial contamination of groundwater at small community water supplies in Finland.

The raw water quality and associations between the factors considered as threats to water safety were studied in 20 groundwater supplies in central Finland in 2002-2004. Faecal contaminations indicated by the appearance of Escherichia coli or intestinal enterococci were present in five small community water supplies, all these managed by local water cooperatives. Elevated concentrations of nutrients in raw water were linked with the presence of faecal bacteria. The presence of on-site technical hazards to water safety, such as inadequate well construction and maintenance enabling surface water to enter into the well and the insufficient depth of protective soil layers above the groundwater table, showed the vulnerability of the quality of groundwater used for drinking purposes. To minimize the risk of waterborne illnesses, the vulnerable water supplies need to be identified and appropriate prevention measures such as disinfection should be applied.

Maturity and hygiene quality of composts and hygiene indicators in agricultural soil fertilised with municipal waste or manure compost.

Composts produced from municipal source separated biowaste (Biowaste), a mixture of biowaste and anaerobically digested sewage sludge (Biosludge) and cattle manure (Manure) were examined for their maturity and hygiene quality. The composts were applied to a potato crop in 2004 and to a barley nurse crop of forage ley in 2005 in a field experiment. Numbers of faecal coliforms, enterococci, clostridia and Salmonella in field soil were determined 2 weeks and 16 weeks after compost applications. Municipal compost batches chosen based on successful processing showed variable maturity during field application, and the need to evaluate compost maturity with multiple variables was confirmed. The numbers of faecal coliform were similar in all compost types, averaging 4.7 and 2.3 log( 10) CFU g(-1) in the first and second years, respectively. The highest number of enterococci was 5.2 log(10) CFU g(-1), found in Manure compost in the first year, while the highest clostridia numbers were found in Biosludge compost, averaging 4.0 log(10) CFU g(-1) over both years. Except for one case, less than 2.4 log(10) CFU g(-1) of faecal coliforms or clostridia were found in compost-fertilised soil, while the numbers of enterococci were mostly higher than in unfertilised soil (<4.2 or <3.2 log(10) CFU g(-1), respectively). No hygiene indicator bacteria were present in compost-fertilised potato at harvest. Overall, compost fertilisations caused rather small changes in the counts of hygiene indicators in the field environment.

Human urine and wood ash as plant nutrients for red beet (Beta vulgaris) cultivation: impacts on yield quality.

The objective of this study was to evaluate the effect of human urine and wood ash fertilization on the yield and quality of red beet by measuring the microbial, nutrient, and antioxidant (betanin) content of the roots. Red beets were fertilized with 133 kg of N/ha as mineral fertilizer, urine and ash, and only urine with no fertilizer as a control. The mineral-fertilized plants and urine- and ash-fertilized plants also received 89 kg of P/ha. Urine and ash and only urine fertilizer produced 1720 and 656 kg/ha more root biomass, respectively, versus what was obtained from the mineral fertilizer. Few fecal coliforms and coliphage were detected in mineral-fertilized and urine- and ash-fertilized red beet roots. The protein and betanin contents in red beet roots were similar in all treatments. In conclusion, this study revealed that urine with or without ash can increase the yield of red beet and furthermore the microbial quality and chemical quality were similar to the situation in mineral-fertilized products.

Stored human urine supplemented with wood ash as fertilizer in tomato (Solanum lycopersicum) cultivation and its impacts on fruit yield and quality.

This study evaluates the use of human urine and wood ash as fertilizers for tomato cultivation in a greenhouse. Tomatoes were cultivated in pots and treated with 135 kg of N/ha applied as mineral fertilizer, urine + ash, urine only, and control (no fertilization). The urine fertilized plants produced equal amounts of tomato fruits as mineral fertilized plants and 4.2 times more fruits than nonfertilized plants. The levels of lycopene were similar in tomato fruits from all fertilization treatments, but the amount of soluble sugars was lower and Cl(-) was higher in urine + ash fertilized tomato fruits. The beta-carotene content was greater and the NO(3)(-) content was lower in urine fertilized tomato fruits. No enteric indicator microorganisms were detected in any tomato fruits. The results suggest that urine with/without wood ash can be used as a substitute for mineral fertilizer to increase the yields of tomato without posing any microbial or chemical risks.

Airborne enteric coliphages and bacteria in sewage treatment plants.

The concentrations of airborne culturable microorganisms were determined in wastewater and sludge treatment processes of seven sewage treatment plants. Two types of coliphages, Salmonella and total viable bacteria were sampled by the BioSampler and the numbers of faecal coliforms and enterococci were obtained from the Andersen 6-stage impactor. The BioSampler recovered higher numbers of airborne coliphage viruses than has been measured with other liquid samplers in previous studies, suggesting that this sampler has improved efficiency for sampling airborne coliphages. Airborne coliphages were detected in many stages of the wastewater or sludge treatment process. The highest microbiological air contaminations were found in pre-treatment and aerated grit separation stages of the operation. This was attributed to aerosolisation of microorganisms by mechanical handling or forced aeration. Aeration and settling processes located outdoors caused low microbial concentrations, but the brush aerator released more microorganisms into the air. Our results emphasize the necessity for controlling the exposure of sewage workers to airborne microorganisms, especially in process areas that involve mechanical agitation or forced aeration of wastewater.

Evaluating slurry broadcasting and injection to ley for phosphorus losses and fecal microorganisms in surface runoff.

The recent growth in the size of dairy cattle farms and the concentration of farms into smaller areas in Finland may increase local water pollution due to increased manure production and slurry application to grass. Therefore, a field study was conducted to monitor losses of total phosphorus (TP), dissolved reactive phosphorus (DRP), and fecal microorganisms in surface runoff from a perennial ley. Cattle slurry was added once a year in June 1996-1997 (Study I) and biannually in June and October 1998-2000 (Study II). The slurry was surface broadcast or injected into the clay soil. The field had a slope of 0.9 to 1.7%. Mineral fertilizer was applied on control plots. Biannual slurry broadcasting increased DRP (p < 0.001) and TP losses (p < 0.001) and numbers of fecal microorganisms in surface runoff waters. The highest losses of TP (2.7 kg ha(-1) yr(-1)) and DRP (2.2 kg ha(-1) yr(-1)) and the highest numbers of fecal coliforms (880 colony-forming units [CFU] per 100 mL) and somatic coliphages (2700 plaque-forming units [PFU] per 100 mL) were measured after broadcasting slurry to wet soil followed by rainfall in fall 1998. Injection reduced the TP and DRP losses in surface runoff by 79 and 86%, respectively, compared with broadcasting (17 Oct. 1998-27 Oct. 1999). Corresponding numbers for fecal coliforms were 350 CFU (100 mL)(-1) and for somatic coliphages were 110 PFU (100 mL)(-1) in surface runoff after injection in October 1998. Slurry injection should be favored when spreading slurry amendments to grassland to avoid losses of P and fecal microorganisms in runoff to surface waters.

Freezing tolerance of ectomycorrhizal fungi in pure culture.

The ability to survive freezing and thawing is a key factor for the existence of life forms in large parts of the world. However, little is known about the freezing tolerance of mycorrhizal fungi and their role in the freezing tolerance of mycorrhizas. Threshold temperatures for the survival of these fungi have not been assessed experimentally. We grew isolates of Suillus luteus, Suillus variegatus, Laccaria laccata, and Hebeloma sp. in liquid culture at room temperature. Subsequently, we exposed samples to a series of temperatures between +5 degrees C and -48 degrees C. Relative electrolyte leakage (REL) and re-growth measurements were used to assess the damage. The REL test indicated that the lethal temperature for 50% of samples (LT(50)) was between -8.3 degrees C and -13.5 degrees C. However, in the re-growth experiment, all isolates resumed growth after exposure to -8 degrees C and higher temperatures. As many as 64% of L. laccata samples but only 11% in S. variegatus survived -48 degrees C. There was no growth of Hebeloma and S. luteus after exposure to -48 degrees C, but part of their samples survived -30 degrees C. The fungi tolerated lower temperatures than was expected on the basis of earlier studies on fine roots of ectomycorrhizal trees. The most likely freezing tolerance mechanism here is tolerance to apoplastic freezing and the concomitant intracellular dehydration with consequent concentrating of cryoprotectant substances in cells. Studying the properties of fungi in isolation promotes the understanding of the role of the different partners of the mycorrhizal symbiosis in the freezing tolerance.

Filter performance of n99 and n95 facepiece respirators against viruses and ultrafine particles.

The performance of three filtering facepiece respirators (two models of N99 and one N95) challenged with an inert aerosol (NaCl) and three virus aerosols (enterobacteriophages MS2 and T4 and Bacillus subtilis phage)-all with significant ultrafine components-was examined using a manikin-based protocol with respirators sealed on manikins. Three inhalation flow rates, 30, 85, and 150 l min(-1), were tested. The filter penetration and the quality factor were determined. Between-respirator and within-respirator comparisons of penetration values were performed. At the most penetrating particle size (MPPS), >3% of MS2 virions penetrated through filters of both N99 models at an inhalation flow rate of 85 l min(-1). Inhalation airflow had a significant effect upon particle penetration through the tested respirator filters. The filter quality factor was found suitable for making relative performance comparisons. The MPPS for challenge aerosols was <0.1 mum in electrical mobility diameter for all tested respirators. Mean particle penetration (by count) was significantly increased when the size fraction of <0.1 mum was included as compared to particles >0.1 mum. The filtration performance of the N95 respirator approached that of the two models of N99 over the range of particle sizes tested ( approximately 0.02 to 0.5 mum). Filter penetration of the tested biological aerosols did not exceed that of inert NaCl aerosol. The results suggest that inert NaCl aerosols may generally be appropriate for modeling filter penetration of similarly sized virions.