Engineering, feasibility, and safety of force-controlled oropharyngeal swabs with a 3D-printed feedback system FCCSS (force controlled COVID-19 swab study) - a preliminary study.

Errors in laboratory diagnostics of viral infections primarily occur during the preanalytical phase, which is especially observed in sample collection. Hitherto, no efforts have been made to optimize oropharyngeal smears. An accurate method to analyze the necessary conditions for a valid oropharyngeal smear test is required, especially to avoid false negative results, which can lead to promotion of the spread of viruses such as SARS-CoV-2. In this study, a maximum-force failure analysis was performed on a swab, and the highest tolerable force was then measured on 20 healthy volunteers to obtain the dimensions of the possible force to be applied on a swab. Subsequently, a device which can validate and reproducibly indicate this force during swab collection was developed. The study demonstrated that swabs generally fail at a maximum force of 5 N. Furthermore, an average force of 2.4±1.0 N was observed for the 20 volunteers. Lastly, this study described the development of a device which presents the selected force with a mean accuracy of 0.05 N (Force applied by Device 1: 0.46±0.05 N, Device 2: 1.55±0.11 N, Device 3: 2.57±0.18 N) and provides feedback via haptic and acoustic clicks as well as with a visual indicator. In the future, the swab will be analyzed for the presence of viral pathogens to determine its diagnostic performance corresponding to the force (German Clinical Trials Register Number 00024455).

A 6-week randomized-controlled field study: effect of isokinetic eccentric resistance training on strength, flexibility and muscle structure of the shoulder external rotators in male junior handball players.

Background: Team handball involves a tremendous amount of shoulder motion with high forces during repeated extended external range of motion. This causes shoulder complaints and overuse injuries. While eccentric training for the lower extremity shows preventive effects by improving strength, range of motion and fascicle length, there is a research gap for the shoulder joint and for advanced tissue characterization using diffusion tensor imaging. Objectives: To investigate the effects of 6-week eccentric isokinetic resistance training on strength, flexibility, and fiber architecture characteristics of the external rotators compared to an active control group in junior male handball players. Methods: 15 subjects were randomly assigned to the eccentric training group and 14 subjects to the active control group (conventional preventive training). Primary outcome measures were eccentric and concentric isokinetic strength of the external rotators, range of motion, and muscle fascicle length and fascicle volume. Results: The intervention group, showed significant changes in eccentric strength (+15%). The supraspinatus and infraspinatus muscles showed significant increases in fascicle length (+13% and +8%), and in fractional anisotropy (+9% and +6%), which were significantly different from the control group. Conclusion: Eccentric isokinetic training has a significant effect on the function and macroscopic structure of the shoulder external rotators in male junior handball players. While strength parameters and muscle structure improved, range of motion did not change. This research helps understanding the physiology of muscle and the role of eccentric training on shoulder function and muscle structure. Furthermore, DTI was found to be a promising tool for advanced tissue characterization, and the in vivo derived data can also serve as model input variables and as a possibility to extend existing ex-vivo muscle models. Future research is needed for functional and structural changes following convenient eccentric field exercises.

Comparison of needle and conventional arthroscopy for visualisation of predefined anatomical structures of the knee joint: a feasibility study in human cadavers and patients.

BACKGROUND: In terms of the optics used for Knee arthroscopy, a large number of different endoscopes are currently available. However, the use of the 30° optics in knee arthroscopy has been established as the standard procedure for many years. As early as the 1990s, needle arthroscopy was occasionally used as a diagnostic tool. In addition to the development of conventional optics technology in terms of camera and resolution, needle arthroscopes are now available with chip-on-tip image sensor technology. To date, no study has compared the performance of this kind of needle arthroscopy versus standard arthroscopy in the clinical setting in terms of the visibility of anatomical landmarks. In this monocentric prospective feasibility study, our aim was to evaluate predefined anatomical landmarks of the knee joint using needle arthroscopy (0° optics) and conventional knee arthroscopy (30° optics) and compare their performance during knee surgery. METHODS: Examinations were performed on eight cadavers and seven patients who required elective knee arthroscopy. Two surgeons independently performed the examinations on these 15 knee joints, so that we were able to compare a total of 30 examinations. The focus was on the anatomical landmarks that could be visualized during a conventional diagnostic knee arthroscopy procedure. The quality of visibility was evaluated using a questionnaire. RESULTS: In summary, the average visibility for all the anatomic landmarks was rated 4.98/ 5 for the arthroscopy using 30° optics. For needle arthroscopy, an average score of 4.89/ 5 was obtained. Comparatively, the needle arthroscope showed slightly limited visibility of the retropatellar gliding surface in eight (4.5/ 5 vs. 5/ 5), medial rim of the patella in four (4.85/ 5 vs. 5/ 5), and suprapatellar recess in four (4.83/ 5 vs. 5/ 5) cases. Needle arthroscopy was slightly better at visualizing the posterior horn of the medial meniscus in four knee joints (4.9/ 5 vs. 4.85/ 5). CONCLUSION: Needle arthroscopy is a promising technology with advantages in terms of minimally invasive access and good visibility of anatomical landmarks. However, it also highlights some limitations, particularly in cases with challenging anatomy or the need for a wide field of view.

Primary stability in locking plate fixation for proximal humeral fractures may be increased by using an additional nail osteosynthesis in combination with locking plate osteosynthesis-A biomechanical comparison.

BACKGROUND: Stability is regarded as an important factor for proper healing and avoiding secondary dislocation in osteoporotic fractures of the proximal humerus. Several surgical techniques have been proposed for treatment, including intramedullary nail osteosynthesis and locking plate fixation. This study introduces a novel approach that combines both techniques and compares its primary stability with conventional methods. METHODS: The study involved 25 osteoporotic humeri with two-part fracture models, which were randomly assigned to locking-plate fixation, intramedullary nailing, or a combination of both techniques. The specimens were subjected to sinusoidal loading at 250 N in 20° abduction for 5000 cycles and then to quasi-static loading until failure. Fracture movement, failure mode, and failure load were measured and compared among the groups. FINDINGS: The groups fixated with intramedullary nailing and the groups fixated with intramedullary nailing and locking plate fixation showed significantly lower fracture motion than the group using locking plate fixation only (p < 0.005) and significantly higher load to failure (p = 0.007 and p = 0.0062, respectively). There was no significant difference between the group using intramedullary nailing and the group using locking-plate fixation and intramedullary nailing in fracture movement or load-to-failure (p > 0.005). INTERPRETATION: The results indicate that locking plate fixation provides less primary stability than intramedullary nailing or the combined of both techniques. This combined approach may offer advantages as a treatment for complex proximal humeral fractures in osteoporotic bone, and specific implants should be developed to ensure optimal treatment.

Effect of isokinetic eccentric training on the human shoulder strength, flexibility, and muscle architecture in physically active men: A preliminary study.

Strengthening the rotator cuff muscles is important for injury prevention and rehabilitation. Since muscle fascicle length improves motor performance and is suggested to reduce the risk of injury for the hamstring, it may be an important variable to promote multidirectional changes in the function and macroscopic structure for the shoulder. Recent literature reviews overwhelmingly suggest that eccentric exercises improve fascicle length and functional measures for the lower limb. However, there is a research gap for the shoulder. Since ultrasound imaging is the most commonly used imaging technique to quantify muscle structure, but has yielded heterogeneous results in different studies, there is another issue and a research gap for the imaging method. Based on the research gaps, the purpose of this study was to evaluate the effects of standardized eccentric strength training on the function and structure of the external rotator cuff muscles using an isokinetic dynamometer and MRI. Therefore, a preliminary pre-post intervention study was conducted and 16 physically active men were recruited in October 2021. For the right shoulder, an eccentric isokinetic training was performed twice a week for almost six weeks. The primary outcome measures (external rotators) were active and passive range of motion, eccentric and concentric torque at 30, 60, and 180°/s isokinetic speed, and fascicle length and fascicle volume for the supraspinatus and infraspinatus muscles. The findings show a training effect for the absolute mean values of eccentric strength (+24%, p = .008). The torque-angle relationship increased, especially in the final phase of range of motion, although a 4% (p = .002) decrease in passive range of motion was found in the stretch test. Positive changes in muscle structure were shown for the supraspinatus muscle fascicle length (+16%, p = .003) and fascicle volume (+19%, p = .002). Based on the study results, we can conclude that eccentric isokinetic training has a significant positive effect on the shoulder. To our knowledge, this is the first eccentric training study using both isokinetic dynamometer and muscle diffusion tensor imaging to access functional and structural changes in the human shoulder rotator cuff muscles. The methods were shown to be applicable for interventional studies. Based on these results, populations such as high-performance handball players with highly trained shoulders should be included in future studies.

A comparison between a maximum care university hospital and an outpatient clinic - potential for optimization in arthroscopic workflows?

BACKGROUND: Due to the growing economic pressure, there is an increasing interest in the optimization of operational processes within surgical operating rooms (ORs). Surgical departments are frequently dealing with limited resources, complex processes with unexpected events as well as constantly changing conditions. In order to use available resources efficiently, existing workflows and processes have to be analyzed and optimized continuously. Structural and procedural changes without prior data-driven analyses may impair the performance of the OR team and the overall efficiency of the department. The aim of this study is to develop an adaptable software toolset for surgical workflow analysis and perioperative process optimization in arthroscopic surgery. METHODS: In this study, the perioperative processes of arthroscopic interventions have been recorded and analyzed subsequently. A total of 53 arthroscopic operations were recorded at a maximum care university hospital (UH) and 66 arthroscopic operations were acquired at a special outpatient clinic (OC). The recording includes regular perioperative processes (i.a. patient positioning, skin incision, application of wound dressing) and disruptive influences on these processes (e.g. telephone calls, missing or defective instruments, etc.). For this purpose, a software tool was developed ('s.w.an Suite Arthroscopic toolset'). Based on the data obtained, the processes of the maximum care provider and the special outpatient clinic have been analyzed in terms of performance measures (e.g. Closure-To-Incision-Time), efficiency (e.g. activity duration, OR resource utilization) as well as intra-process disturbances and then compared to one another. RESULTS: Despite many similar processes, the results revealed considerable differences in performance indices. The OC required significantly less time than UH for surgical preoperative (UH: 30:47 min, OC: 26:01 min) and postoperative phase (UH: 15:04 min, OC: 9:56 min) as well as changeover time (UH: 32:33 min, OC: 6:02 min). In addition, these phases result in the Closure-to-Incision-Time, which lasted longer at the UH (UH: 80:01 min, OC: 41:12 min). CONCLUSION: The perioperative process organization, team collaboration, and the avoidance of disruptive factors had a considerable influence on the progress of the surgeries. Furthermore, differences in terms of staffing and spatial capacities could be identified. Based on the acquired process data (such as the duration for different surgical steps or the number of interfering events) and the comparison of different arthroscopic departments, approaches for perioperative process optimization to decrease the time of work steps and reduce disruptive influences were identified.

Assessment of micromotion at the bone-bone interface after coracoid and scapular-spine bone-block augmentation for the reconstruction of critical anterior glenoid bone loss-a biomechanical cadaver study.

BACKGROUND: Glenoid bone loss is among the most important risk factors for recurrent anterior shoulder instability, and a bony reconstruction is recommended in cases of critical bone loss (> 15%). The commonly used surgical techniques, including coracoid transfer, are associated with considerable complications. The aim of this study was to assess the motion at the glenoid-bone-block interface after coracoid and spina-scapula bone-block reconstruction of the anterior glenoid. METHODS: Twelve cadaveric shoulders were tested. A 20% bone defect of the anterior glenoid was created, and the specimens were randomly assigned for glenoid augmentation using a coracoid bone block (n = 6) or a scapular spine bone block (n = 6). The glenoid-bone interface was cyclically loaded for 5000 cycles with a force of 170 N. The micromotion was tracked using an optical measurement system (GOM ARMIS) and was evaluated with the GOM Correlate Pro software. RESULTS: The most dominant motion component was medial irreversible displacement for the spina-scapula (1.87 mm; SD: 1.11 mm) and coracoid bone blocks (0.91 mm; SD: 0.29 mm) (n.s.). The most medial irreversible displacement took place during the first nine cycles. The inferior reversible displacement was significantly greater for spina-scapula bone blocks (0.28 mm, SD: 0.16 mm) compared to coracoid bone blocks (0.06 mm, SD: 0.10 mm) (p = 0.02). CONCLUSIONS: The medial irreversible displacement is the dominant motion component in a bone-block reconstruction after a critical bone loss of the anterior glenoid. The spina-scapula and coracoid bone blocks are comparable in terms of primary stability and extent of motion. Thus, spina-scapula bone blocks may serve as alternatives in bony glenoid reconstruction from a biomechanical point of view.

3D-printing of the elbow in complex posttraumatic elbow-stiffness for preoperative planning, surgery-simulation and postoperative control.

BACKGROUND: Restoration of mobility of the elbow after post-traumatic elbow stiffening due to osteophytes is often a problem. METHODS: The anatomical structures were segmented within the CT-scan. Afterwards, the Multi Jet Fusion 3D-printing was applied to create the model made of biocompatible and steam-sterilizable plastic. Preoperative simulation of osteophyte resection at the 3D-model was performed as well as the direct comparison with the patient anatomy intraoperatively. RESULTS: The patient-specific was very helpful for the preoperative simulation of the resection of elbow osteophytes. The 3D anatomical representation improved the preoperative plan its implementation. A high degree of fidelity was found between the 3D Printed Anatomical representation and the actual joint pathology. CONCLUSIONS: Arthrolysis of complex post-traumatic bony changes is an important indication for the use of 3D models for preoperative planning. Due to the use of 3D printing and software simulation, accurate resection planning is feasible and residual bony stiffening can be avoided. 3D printing models can lead to an improvement in surgical quality.

Diffusion tensor imaging: Influence of segmentation on fiber tracking in the supraspinatus muscle-An inter-operator reliability analysis.

The ability of muscle to generate force depends on its architecture and health condition. MR-based diffusion tensor imaging of muscle (mDTI) is an innovative approach for showing the fiber arrangement for the whole muscle volume. For accurate calculations of fiber metrics, muscle segmentation prior to tractography is regarded as necessary. Since segmentation is known to be operator dependent, it is important to understand how segmentation affects tractography. The aim of this study was to compare the results of deterministic fiber tracking based on muscle models generated by two independent operators. In addition, this study compares the results with a segmentation-free approach. Fifteen subjects underwent mDTI of the right shoulder. The results showed that mDTI can be successfully applied to complex joints such as the human shoulder. Furthermore, operator segmentation did not influence the results of fiber tracking and fascicle length (FL), fiber volume (FV), fractional anisotropy (FA), axial diffusivity (AD), radial diffusivity (RD), and mean diffusivity (MD) showed excellent intraclass correlation estimates (≥ 0.975). As an exploratory approach, the segmentation-free fiber tracking showed significant differences in terms of mean fascicle length. Based on these findings, we conclude that tractography is not sensitive to small deviations in muscle segmentation. Furthermore, it implies that mDTI and automatic segmentation approaches or even a segmentation-free analysis can be considered for evaluation of muscle architecture.

Anatomic repair and ligament bracing as an alternative treatment option for acute combined PCL injuries involving the posteromedial or posterolateral corner-results of a multicentre study.

INTRODUCTION: Combined PCL injuries involving the posteromedial/-lateral corner (PMC/PLC) usually require surgical management. Literature shows controversy regarding the standards of treatment. Suture-augmented repair leads to excellent results in acute knee dislocations but has not been investigated clinically in combined PCL injuries. The purpose of this multicentre study was to evaluate the clinical outcome of this technique in acute combined PCL injuries. MATERIALS & METHODS: N = 33 patients with acute combined PCL injuries involving the PMC/PLC were treated by one-stage suture repair with ligament bracing of the PCL and suture repair of the accompanying PMC/PLC injuries with/without ligament bracing or primary augmentation by semitendinosus autograft. Outcome was assessed by IKDC questionnaire, Lysholm Score, Tegner Activity Scale and KOOS. Additional PCL stress-radiography was performed. RESULTS: N = 31 patients with combined PCL injuries (female: male = 7:24; age 39.1 ± 13.8 years) with a follow-up of 16.8 ± 9.6 months were finally evaluated. 18 had PMC injuries, 13 PLC injuries. 32.2% presented with accompanying meniscal tears (70% medial meniscus). 19.4% showed cartilage injuries grade III-IV. Complications included one infection and four knee stiffnesses. Three had symptomatic postoperative instability, all affiliated to the PLC group. The IKDC was 69.8 ± 16.5, Lysholm score 85 ± 14.4 and KOOS 89.7 ± 8.1. Median loss of activity (Tegner) was 0.89 ± 1.31. Comparing PMC and PLC, all scores showed a tendency towards more favourable outcomes in the PMC group (n.s.). Stress-radiography showed an overall side-to-side difference of 3.7 ± 3.8 mm. Subgroup evaluation showed statistically significant better results (p = 0.035) of PMC (2.5 ± 1.5 mm) versus PLC (5.8 ± 5.6 mm). CONCLUSIONS: One-stage suture repair with ligament bracing is a viable technique for acute combined PCL injuries and predominantly leads to good and excellent clinical outcomes. Patients with PLC injuries show a tendency towards inferior outcomes and higher instability rates compared to PMC injuries. These results may help in therapy planning and counselling patients with these rare injury pattern. LEVEL OF EVIDENCE: Level II.

Dynamic biomechanical investigation of a novel sulcus bicipitalis plate in combination with a conventional locking plate for the treatment of complex proximal humerus fractures.

BACKGROUND: Complex proximal humerus fractures place high demands on osteosynthetic treatment. In some cases, double plating has already been used to increase primary stability of the osteosynthesis. This approach was advanced in the present study by developing an additive plate for the sulcus bicipitalis. To demonstrate the superior primary stability of the newly developed plate osteosynthesis, a biomechanical comparison against a conventional locking plate with an additional calcar screw was performed. METHODS: Ten pairs of cadaveric humeri were treated proximally with a locking plate (PENTA plate small fragment, INTERCUS). Each had a two-part fracture model with a fracture gap of 10 mm. All right humeri were treated with an additive novel plate that extends along the bicipital sulcus and encircles the lesser tuberosity proximally. First, the specimens were loaded sinusoidally at 250 N in 20° abduction for 5000 cycles. Afterwards quasi-static loading until failure was applied. FINDINGS: The movement at the fracture gap due to the cyclic loading occurred mainly as rotation around the z-axis, corresponding to a tilt medially and distally. The double plate osteosynthesis reduces the rotation by approximately 39%. For all load cycles observed, except 5000 cycles, medial and distal rotation of the head was significantly reduced by the double plate. The failure loads showed no significant differences between the groups. INTERPRETATION: In the tested scenario under cyclic loading, the novel double plate osteosynthesis showed a significant superiority of primary stability over the conventional treatment with one locking plate. Furthermore, the study showed the advantages of cyclic load application over quasi-static load application until failure.

Assessment of Complication Risk in the Treatment of Proximal Humerus Fractures: A Retrospective Analysis of 4019 Patients.

(1) Background: The treatment of proximal humeral fractures (PHFs) is debated controversially. Current clinical knowledge is mainly based on small single-center cohorts. The goal of this study was to evaluate the predictability of risk factors for complications after the treatment of a PHF in a large clinical cohort in a multicentric setting. (2) Methods: Clinical data of 4019 patients with PHFs were retrospectively collected from 9 participating hospitals. Risk factors for local complications of the affected shoulder were assessed using bi- and multivariate analyses. (3) Results: Fracture complexity with n = 3 or more fragments, cigarette smoking, age over 65 years, and female sex were identified as predictable individual risk factors for local complications after surgical therapy as well as the combination of female sex and smoking and the combination of age 65 years or older and ASA class 2 or higher. (4) Conclusion: Humeral head preserving reconstructive surgical therapy should critically be evaluated for patients with the risk factors abovementioned.

Combined Humeral Head and Shaft Fractures: Outcome Following Intramedullary Nailing and Plating.

Background and Objectives: Combined fractures of the humeral head and shaft (FHS) are rare but frequently involve an intermuscular fracture as its characteristic pattern. The aim of this retrospective study was to investigate intramedullary nailed and plated FHS in terms of outcomes and complications. Materials and Methods: The present study included patients with FHS, treated via either intramedullary nailing or plating within a period of 10 years, with a minimum follow-up of 12 months. Functional outcome was assessed using the age- and sex-adapted Constant-Murley Score (CMS-K). Rates of complications and revision surgeries were registered. Results: Twenty-five patients (18 females, 7 males, age 60.1 ± 14.2 years, range 23-76 years) were included in the study. Nailing was performed in 16 patients (12 females, 4 males, age 62.6 ± 12.4 years), whereas plating was executed in nine patients (6 females, 3 males, age 55.8 ± 17.0 years). Follow-up among all patients was 45.1 ± 26.3 months (range 12-97 months). CMS-K was 70.3 ± 32.3 in the nailing group, with reoperation in four cases, and 76.0 ± 31.0 in the plating group, with one reoperation (p = 0.42). Patients with no metaphyseal fragment displacement (n = 19; CMS-K 76.7 ± 17.3) demonstrated significantly better functional outcomes versus those with secondary displacement of the metaphyseal fragments (n = 6; CMS-K 60.0 ± 17.1), p = 0.046. Conclusions: Comparable acceptable clinical outcome is obtained when comparing nailing with additional open cerclage or lag-screw fixation techniques versus plating with open reduction. However, a higher revision rate was observed after nailing. The correct metaphyseal fragment fixation seems to be crucial to avoid loss of reduction and hence the need for revision surgery, as well as a worse outcome.

Health Care for Inpatients with a Proximal Humeral Fracture - an Analysis of Health Insurance Data. / Versorgungsrealität stationär behandelter Patienten mit proximaler Humerusfraktur ­ Eine Analyse auf Basis von GKV-Daten.

The proximal humeral fracture is one of the most common fractures in the elderly. While epidemiological factors have been well studied, the influence of a proximal humeral fracture on morbidity, mortality and associated costs has not yet been adequately analysed.On a basis of 4.1 million insurance holders of the German public health insurance (GKV), patients with (study population, SP) and without (comparison group, VG) a proximal humeral fracture (pHF) were compared with regard to comorbidity, rehospitalisation, mortality, drug and aid needs as well as number of physician contacts. Study period was between 2012 and 2016.6068 patients of the SP met the inclusion and exclusion criteria (age 69.4 ± 14.3 years; male : female = 28.2% : 71.8%). 4781 patients (78.8%) received surgical, 1287 patients (21.2%) conservative treatment of the pHF. Rehospitalisations and visits to the general practitioner occurred more frequently in the SP vs. VG (p < 0.01). Contacts with specialists after pHF varied according to specialty, as did newly occurring diseases. Typical specialities for preventive examinations were significantly less common (gynaecology p < 0.01, pathology p < 0.01, dermatology p < 0.01). According to pHF, the costs of SP for drugs (2490.76 ± 1395.51 € vs. 2167.86 ± 1314.43 €; p = 0.04), medical therapies (867.01 ± 238.67 € vs. 393.26 ± 217.55 €; p < 0.01) and aids (821.02 ± 415.73 € vs. 513.52 ± 368.76 €; p < 0.01) were significantly above the VG. The two-year survival after pHF is lower in the SP than in the VG (p < 0.01).The results show increased morbidity and mortality as well as medical costs after a proximal humeral fracture. Preventive examinations and treatments are rarer. In the future, care concepts for patients with proximal humeral fractures should not only be optimised with regard to functional scores and reduced complication rates, but also with regard to quality of life and preservation of general health.

Shoulder-specific Outcome after Proximal Humerus Fracture Influences Medium-term Overall Quality of Life. / Das schulterspezifische Outcome nach proximaler Humerusfraktur hat Einfluss auf die mittelfristige allgemeine Lebensqualität.

BACKGROUND: Surgical treatment of proximal humerus fracture is an established procedure. Postoperative complications have been shown to have a significant impact on shoulder-specific outcome. Little is known to date about an influence on injury-independent quality of life. AIM OF THE WORK: The aim of this retrospective study is to analyse whether patients with a poor functional outcome after surgically treated proximal humerus fracture also show a reduced general quality of life in the medium term. Emphasis is placed on the analysis of patients with poor functional outcome due to postsurgical complications. MATERIAL AND METHODS: Evaluation of all patients operated at one level 1 trauma centre with a proximal humerus fracture in the period 01.01.2005 to 31.12.2015 and follow-up using validated scores (Constant-Murley Score [CMS], EQ-5D). Two groups, group A with good outcome (∆CMS ≤ 15P.) and group B with poor outcome (∆CMS ≥ 16P.), were defined. Furthermore, descriptive variables including definition of a complication were defined in advance. RESULTS: 138 patients were included in the study (group A: 91, group B: 47). The mean follow-up was 93.86 months ± 37.33 (36-167). Group B had significantly more complications. Furthermore, patients with poor outcome regarding the shoulder (group B) were also found to have significantly lower EQ-VAS (78.9 ± 19.2 [20.0-100] vs. 70.4 ± 19.5 [15.0-98.0]; p = 0.008) and EQ index (0.91 ± 0.14 [0.19-1.00] vs. 0.82 ± 0.17 [0.18-1.00]; p < 0.001). DISCUSSION: In conclusion, in the present study, the patients with poor outcome of shoulder function in CMS have significantly lower overall quality of life after a mean of more than 6 years of follow-up. The poor outcome was due to a significantly higher postoperative complication rate. This was independent of the fracture morphology present and the surgical procedure used.

[Combined intrapulmonary/intramediastinal K-wire position after K-wire osteosynthesis of the clavicle : A case report]. / Kombinierte intrapulmonale/intramediastinale K-Draht-Lage nach K-Draht-Osteosynthese an der Clavicula : Ein Case Report.

BACKGROUND: Lateral clavicle fractures can be treated both conservatively and surgically depending on the fracture classification. Different surgical techniques have been described for the operative treatment. The selection of the appropriate technique is decisive for the functional outcome and healing process without complications. CASE: We report on a patient with a secondary dislocation of two Kirschner wires after Kirschner wire osteosynthesis. The secondary dislocation caused one of the wires to migrate into the mediastinum and pulmonary tissue, directly under the aortic arch. To prevent further migration with potential damage to surrounding structures, a uniportal video-assisted thoracoscopy was performed to retrieve the wire. CONCLUSION: The treatment of lateral clavicle fractures should be performed with bent Kirschner wires as they can otherwise lead to severe complications including the occurrence of pseudarthrosis or secondary migration of the material. Safe and stable surgical techniques (plate osteosynthesis, hybrid treatment) should be preferred if they are available.

The subpopliteal fat body.

INTRODUCTION: The knee is likely to get hurt due to its excessive weight-bearing, for which it is surrounded by strongly tensioned ligaments, connectives and muscles. These highly active structures are imbedded in fatty tissue. The Fatty and loose connective tissue of the knee recently gained a renaissance in research. While the Hoffa fat body in the ventral knee attracted attention over the last years, we have investigated a smaller, dorsal fat body, ventral to the popliteus muscle. This fat body has not been described before. MATERIALS AND METHODS: 11 knees of 11 fresh specimens were investigated. All muscles but the popliteus muscle were removed. The popliteus was released from its tibial origin and dissected towards its tendinous insertion. Thereby, a subpopliteal fat body (SFB) was shown. The related vessels and nerves were evaluated. The size of the body was measured. Examples of histological slices were stained with HE and immunostained against neurofilament. RESULTS: The SFB lies ventral of the popliteus muscle at the concave posterior tibia and attaches to the periosteum and the popliteus muscle. It is not attached to the posterior cruciate ligament. It is separated from the subpopliteal recess by a lamella deriving from the fibular head. Arterial and venous vessels are seen entering the SFB, deriving from the popliteal artery or the anterior tibial artery. A subbranch of the tibial nerve was seen to reach the SFB. The SFB could be identified in MRI scans and in plastinations. DISCUSSION: Primarily, the SFB provides a gliding space for the mobile part of the popliteus muscle over the tibia. The SFB lies within the tibial concavity, ventral to the popliteus muscle. This is exactly where embryologically, the popliteal artery passes through, before its involution in later stages. Therefore, the SFB may show the former perivascular autonomic nerves which encompass the embryologically created arteries, from which we have seen the arterial remnants. The nerves seen here form neurovascular bundles which could be a source of pain, when compressed. This anatomy may explain the autonomic component of pain in the deep lateral region of the knee. The SFB is functional fat, comparable to the Hoffa's fat pad in the ventral knee.

Effects of surgical and FFP2 masks on cardiopulmonary exercise capacity in patients with heart failure.

AIMS: Surgical and FFP2 masks are recommended to reduce transmission of SARS-CoV-2. The cardiopulmonary effects of facemasks in patients with chronic heart failure are unknown. This prospective, cross-over study quantified the effects of wearing no mask (nm), surgical mask (sm), and FFP2 mask (ffpm) in patients with stable heart failure. METHODS: 12 patients with clinically stable chronic heart failure (HF) (age 63.8±12 years, left ventricular ejection fraction (LVEF) 43.8±11%, NTProBNP 573±567 pg/ml) underwent spiroergometry with and without masks in a randomized sequence. Comfort/discomfort was assessed using a standardized questionnaire. RESULTS: Maximum power was reduced with both types of masks (nm: 108.3 W vs. sm: 101.2 W vs. ffpm: 95.6 W, p<0.01). Maximum respiratory oxygen uptake (1499ml/min vs. 1481 ml/min vs. 1300 ml/min, p = 0.95 and <0.01), peak ventilation (62.1 l/min vs. 56.4 l/min vs. 50.3 l/min, p = 0.15 and p<0.05) and O2-pulse (11.6 ml/beat vs. 11.8 ml/beat vs. 10.6 ml/beat, p = 0.87 and p<0.01) were significantly changed with ffpm but not sm. Discomfort was moderately but significantly increased (nm: 1.6 vs. sm: 3.4 vs. ffpm: 4.4, p<0.05). CONCLUSION: Both surgical and FFP masks reduce exercise capacity in heart failure patients, while FFP2 masks reduce oxygen uptake and peak ventilation. This reduction in cardiopulmonary performance should be considered in heart failure patients whose daily life activities are often just as challenging as exercise is for healthy adults.

Effect of weightbearing and foot positioning on 3D distal tibiofibular joint parameters.

The aim of this study was to investigate the effect of different loading scenarios and foot positions on the configuration of the distal tibiofibular joint (DTFJ). Fourteen paired human cadaveric lower legs were mounted in a loading frame. Computed tomography scans were obtained in unloaded state (75 N) and single-leg loaded stand (700 N) of each specimen in five foot positions: neutral, 15° external rotation, 15° internal rotation, 20° dorsiflexion, and 20° plantarflexion. An automated three-dimensional measurement protocol was used to assess clear space (diastasis), translational angle (rotation), and vertical offset (fibular shortening) in each foot position and loading condition. Foot positioning had a significant effect on DTFJ configuration. Largest effects were related to clear space increase by 0.46 mm (SD 0.21 mm) in loaded dorsal flexion and translation angle of 2.36° (SD 1.03°) in loaded external rotation, both versus loaded neutral position. Loading had no effect on clear space and vertical offset in any position. Translation angle was significantly influenced under loading by - 0.81° (SD 0.69°) in internal rotation only. Foot positioning noticeably influences the measurements when evaluating DTFJ configuration. Loading seems to have no relevant effect on native ankles in neutral position.

Global longitudinal strain differentiates physiological hypertrophy from maladaptive remodeling.

Aims: Differentiation of left ventricular (LV) hypertrophy in healthy athletes from pathological LV hypertrophy in heart disease is often difficult. We explored whether extended echocardiographic measurements such as E/e' and global longitudinal strain (GLS) distinguish physiologic from maladaptive hypertrophy in hypertrophic cardiomyopathy, excessively trained athletes' hearts and normal hearts. Methods: Seventy-eight professional athletes (cyclists n = 37, soccer players n = 29, handball players n = 21) were compared with patients (n = 88) with pathological LV hypertrophy (hypertrophic obstructive cardiomyopathy (HOCM, n = 17), hypertensive heart disease (HHD, n = 36), severe aortic valve stenosis (AVS, n = 35) and with sedentary healthy individuals as controls (n = 37). Results: LV ejection fraction (LVEF) was ≥50% in all patients, athletes (median age 26 years, all male) and the controls (97% male, median age 32 years). LV mass index (LVMI) and septal wall thickness was in normal range in controls, but elevated in cyclists and patients with pathological hypertrophy (p < 0.001 for both). E/e' was elevated in all patients with maladaptive hypertrophy but normal in controls and athletes (p < 0.001 vs. pathological hypertrophy). Furthermore GLS was reduced in patients with pathological hypertrophy compared with athletes and controls (for both p < 0.001). In subjects with septal wall thickness >11 mm, GLS (≥-18%) has a specificity of 79% to distinguish between physiological and pathological hypertrophy. Conclusion: GLS and E/e' are reliable parameters unlike left ventricular mass or LV ejection fraction to distinguish pathological and physiological hypertrophy.