Antimicrobial curcumin-mediated photodynamic inactivation of bacteria in natural bovine casing.

BACKGROUND: Outbreaks related to food contamination by resistant microorganisms is a worldwide concern that, motivates industries and research institutions to search for affordable solutions. Among the solutions that have been proposed, Photodynamic Inactivation (PDI) of microorganisms has gained prominence, among other aspects, because it is easy to apply and does not generate microbial resistance. METHODS: In this study, we used the association between curcumin solubilized with Tween and light in the photodynamic inactivation process, using light-emitting diodes with a wavelength of 430 nm for decontamination S. Typhimurium and K. pneumoniae from bovine casings used as wrappers for meat products. The result was verified by counting and comparing the number of colony-forming units of the treatment concerning the negative control. RESULTS: The solubilizer, Tween 80, used does not change the optical absorption of curcumin. An optical fluence of 150J/cm2 induces a microbial log reduction of 3.8±0.2 and 2.7±0.1 for S. Typhimurium, and K. pneumoniae contaminated guts, respectively. For the 200µM concentration of curcumin, the PDI provided a microbial log reduction of 3.16±0.03 for S. Typhimurium. For K. pneumoniae, the minimal inhibitory concentration of curcumin occurs up to 12.5µM, causing an microbial log reduction of 2.08±0.03. CONCLUSION: Both curcumin and tween are already used as additives in food production and do not pose health risks at the concentrations used. Furthermore, in the case of the material studied, the addition of curcumin favors the organoleptic quality associated with the color of the food, unlike the green or blue photossensitizers. The results pave the way for possible application of curcumin in finished meat products.

Photoactivation of Erythrosine in simulated body fluids.

Photodynamic Therapy (PDT) is a powerful technique for the treatment of cancer and non-cancerous diseases. The precise PDT treatment protocol definition must consider the performance difference between in vitroand in vivoapplications. This also occurs in other biological studies, and to partially overcome this difficulty, the simulated body fluids are generally applied as a prior understanding of the particularities of the different systems. However, in PDT these studies are scarce. In this work, we investigated the photoactivation of Erythrosine, a photosensitizer widely used in PDT, in different simulated body fluids. Differences in the photodegradation kinetics, triplet lifetime, and singlet oxygen generation were observed. The results can help to explain and to define PDT application protocols.

Induction and detection of pressure waves by pulsed thermal lens technique in water-ethanol mixtures.

The mode-mismatched dual-beam thermal lens technique is widely applied in the characterization of optical and thermo-physical properties of solids and liquids. The technique has also been used to investigate transient acoustic waves induced by pulsed laser excitation at the nanosecond time scale. In this paper, we developed a semi-analytical model to describe the transient acoustic wave that allows a fitting procedure to get the physical properties of fluid samples. The method was used to investigate samples with different mixtures of ethanol and water, and quantitative information of piezo-optic coefficient and sound speed are evaluated for the fluid mixtures.

The correlation of physicochemical properties of edible vegetable oils by chemometric analysis of spectroscopic data.

This work aimed to investigate and compare the composition and the physicochemical properties of 18 different sources of edible vegetable oils. A systematic study on the correlation between composition and physical properties was performed using Fourier Transform Infrared (FTIR) Spectroscopy and fatty acid chromatographic analysis. Principal component analysis of FTIR spectra is performed to classify edible oils concerning their physical properties. The results demonstrate the potentiality of the method associated with multivariate statistics analysis as powerful, fast, and non-destructive tools for characterization and quality control of edible vegetable oils.

An Experimental Investigation of Sample-Fluid Heat Coupling Effect in Thermal Lens Technique.

Laser-induced wavefront distortion is detectable by several techniques based on the photothermal effect. The effect is probed by monitoring the phase shift caused by the bulging of the heated area, the photoelastic effects, and the spatial distribution of the refractive index within the sample and in the fluid surrounding it. A simple analytical solution for the wavefront distortion was only possible for low absorbing materials, with the assumption that the stresses obey either the thin-disk or the long-rod type distributions. Recently, a unified theoretical description for the laser-induced optical path change was proposed to overcome part of this limitation for weakly absorbing materials, regardless of its thickness. In this work, we perform an experimental investigation taking the sample-fluid heat coupling effect into account using the thermal lens technique. The experimental investigation presented here validates the unified model. In addition, we show that the heat-coupling model provides an alternative method to obtain physical properties of non-absorbing fluid by using a reference solid sample.

Nanosecond pressure transient detection of laser-induced thermal lens.

We use the thermal lens technique in the nanosecond time scale to describe the acoustic wave effect in liquids and the corresponding correlation with the speed of sound in the fluid, volumetric thermal expansion, and piezo-optic coefficient. These physical properties are found to be directly correlated to the anomalous effects observed in the transients at the nanosecond time scale, where acoustic waves dominate the thermal lens signal inducing an oscillating transient. Our results suggest the application of the thermal lens to study the generation and the detection of thermo-acoustic waves in liquids, which makes this method interesting for all-optoacoustic ultrasound detection and imaging.

From Protohypericin to Hypericin: Photoconversion Analysis Using a Time-Resolved Thermal Lens Technique.

Hypericin (Hyp) is a natural compound with interesting photophysical and pharmacological properties, which has been used in photodynamic therapy and photodynamic inactivation of microorganisms. Its synthesis is based on a series of chemical processes that ends with a light-drug interaction by the photoconversion of protohypericin (pHyp) to Hyp. Although this photosensitizer is used in a variety of medical applications, the photophysical and photochemical mechanisms involved in the final step related to the photo production of Hyp are not completely understood at the molecular level. Protohypericin concentration, solvents, light irradiation under different wavelengths, and a sort of variables could play an important role in predicting the yielding of this photoconversion process. Here, we used the high-sensitive and remote measurement characteristics of the time-resolved thermal lens technique to investigate the relation between the light-induced photoconversion rate of pHyp to Hyp and the initial concentration pHyp. The results show a linear dependence of the photoreaction rate with the concentration of pHyp, indicating that the overall reaction process includes steps comprising the formation of distinct intermediate species. We demonstrate the applicability of the thermal lens technique for the photochemical characterization of photosensitive drugs at low concentration levels.

Design of composite microparticle systems based on pectin and waste material of propolis for modified l-alanyl-l-glutamine release and with immunostimulant activity.

Catabolic conditions like acquired immunodeficiency syndrome, cancer, and burn can cause immunosuppression. Amino acids such as alanine and glutamine are essential for the activity of the immune system. Propolis is immunostimulant and the waste of propolis extraction has been reused with technological and therapeutic purposes. Therefore, this study describes the association of propolis byproduct extract (BPE) with pectin to prepare spray-dried microparticles containing the dipeptide l-alanyl-l-glutamine as stimulant systems of neutrophils. The use of a factorial design allowed selecting the best formulation, which was characterized by morphology, size, and entrapment efficiency analyses. In addition, the systems were characterized by thermal and X-ray diffraction analysis, Fourier-transform infrared spectroscopy, in vitro drug release, and in vitro cytotoxicity and stimulation test of neutrophils. Small well-structured microparticles with good entrapment efficiency values were achieved. Thermal stability of formulation was observed, and it was proved that pectin, BPE and l-alanyl-l-glutamine were dispersed throughout the matrix. The drug was released from the microparticles during 24 h governed by swelling and diffusion. The drug-loaded formulations showed a significant stimulating effect on neutrophils. These structures could increase the activity of immune cells, and other in vitro and in vivo studies should be performed in the future.

Combined photothermal lens and photothermal mirror characterization of polymers.

We propose a combined thermal lens and thermal mirror method as concurrent photothermal techniques for the physical characterization of polymers. This combined method is used to investigate polymers as a function of temperature from room temperature up to 170 °C. The method permits a direct determination of thermal diffusivity and thermal conductivity. Additional measurements of specific heat, linear thermal expansion, and temperature-dependent optical path change are also performed. A complete set of thermal, optical, and mechanical properties of polycarbonate and poly (methyl methacrylate) samples are obtained. Methods presented here can be useful for in situ characterization of semitransparent materials, where fast and non-contacting measurements are required.

Pulsed-laser time-resolved thermal mirror technique in low-absorbance homogeneous linear elastic materials.

A theoretical model for a time-resolved photothermal mirror technique using pulsed-laser excitation was developed for low absorption samples. Analytical solutions to the temperature and thermoelastic deformation equations are found for three characteristic pulse profiles and are compared to finite element analysis methods results for finite samples. An analytical expression for the intensity of the center of a continuous probe laser at the detector plane is derived using the Fresnel diffraction theory, which allows modeling of experimental results. Experiments are performed in optical glasses, and the models are fitted to the data. The parameters of the fit are in good agreement with previous literature data for absorption, thermal diffusion, and thermal expansion of the materials tested. The combined modeling and experimental techniques are shown to be useful for quantitative determination of the physical properties of low absorption homogeneous linear elastic material samples.

A theoretical and experimental study of time-resolved thermal mirror with non-absorbing heat-coupling fluids.

A theoretical and experimental study taking sample-fluid heat coupling into account in time-resolved photothermal mirror experiments is presented. Thermoelastic equations were solved to obtain a semi-analytical solution to the phase shift induced by the sample and the surrounding fluid. The solution was used to model the thermal mirror effects and found to be in excellent agreement with the finite element method analysis and experiment. Heat transferred to the air-coupling fluid did not introduce important effects in the phase shift when compared with the solution obtained, without considering heat flux. However, when using water as the fluid, heat coupling led to a significant effect in fluid phase shift. Experimental results using stainless steel in air and water were used to demonstrate the potentiality of the thermal mirror technique to determine the thermal properties of both the sample and the fluid.