RESUMO
We describe the synthesis, solid state and electronic structures of a series of tunable five-membered cationic and charge-neutral inorganic heterocycles featuring a P3CN core. 1-Aza-2,3,4-triphospholenium cations [(PR)3N(H)CR']+, [1R]+ (R' = Me, Ph, 4-MeOC6H4, 4-CF3C6H4) were formed as triflate salts by the formal [3 + 2]-cyclisation reactions of strained cyclic triphosphanes (PR)3 (R = t Bu, 2,4,6-Me3C6H2 (Mes), 2,6- i Pr2C6H3 (Dipp), 2,4,6- i Pr3C6H2 (Tipp)) with nitriles R'CN in the presence of triflic acid. The corresponding neutral free bases (PR)3NCR' (2R) were readily obtained by subsequent deprotonation with NEt3. The P3CN cores in 2R show an envelope conformation typical for cyclopentenes and present as yellow to orange compounds in the solid state as well as in solution depending on both substituents R and R' in (PR)3NCR'. The P3CN cores in [1R]+ show a significant deviation from planarity with increasing steric bulk of the R groups at phosphorus, which results in a decrease in the HOMO-LUMO gap and distinct low-energy UV-Visible absorption bands. This allows access to colours spanning red, blue, indigo, and magenta. TD-DFT calculations provide valuable insight into this phenomenon and indicate an intramolecular charge-transfer from the HOMO located on the P3 framework to the N[double bond, length as m-dash]C-R'-based LUMO in the cationic species. The cations [1R]+ represent rare examples of phosphorus-rich heterocycles with tunable colour, which can be incorporated into polymers by post-polymerization modification to afford coloured polymers, which demonstrate utility as both proton and ammonia sensors.
RESUMO
Atomically precise nanoclusters hold promise for supramolecular assembly and (opto)electronic- as well as magnetic materials. Herein, this work reports that treating palladium(0) precursors with a triphosphirane affords strongly colored Pd8(PDip)6 that is fully characterized by mass spectrometry, heteronuclear and Cross-Polarization Magic-Angle Spinning (CP-MAS) NMR-, infrared (IR), UV-vis, and X-ray photoelectron (XP) spectroscopies, single-crystal X-Ray diffraction (sc-XRD), mass spectrometry, and cyclovoltammetry (CV). This coordinatively unsaturated 104-electron Pd(0) cluster features a cubic Pd8-core, µ4-capping phosphinidene ligands, and is air-stable. Quantum chemical calculations provide insight to the cluster's electronic structure and suggest 5s/4d orbital mixing as well as minor PdâP covalency. Trapping experiments reveal that cluster growth proceeds via insertion of Pd(0) into the triphosphirane. The unsaturated cluster senses ethylene and binds isocyanides, which triggers the rearrangement to a tetrahedral structure with a reduced frontier orbital energy gap. These experiments demonstrate facile cluster manipulation and highlight non-destructive cluster rearrangement as is required for supramolecular assembly.
RESUMO
Dipnictenes of the type RPn=PnR (Pn=P, As, Sb, Bi) can be viewed as dimers of the corresponding pnictinidenes R-Pn. Phosphanylidene- and arsanylidenephosphoranes (R-Pn(PMe3); Pn=P, As) have been shown to be versatile synthetic surrogates for the delivery of pnictinidene fragments. We now report that thermal treatment of 1 : 1 mixtures of R-P(PMe3) and R'-As(PMe3) gives access to arsaphosphenes of the type RP=AsR'. Three examples are presented and the properties and reactivity of Mes*P=AsDipTer (1) (Mes*=2,4,6-tBu3-C6H2; DipTer=2,6-(2,6-iPr2C6H3)2-C6H3) were studied in detail. Solid state 31P NMR spectroscopy revealed a large 31P NMR chemical shift anisotropy with a span of ca. 920â ppm for 1 while computational methods were employed to investigate this pronounced magnetic deshielding of the P atom in 1. In the presence of the carbene IMe4 (IMe4=:C(MeNCMe)2) 1 is shown to be split into the corresponding NHC adducts Mes*P(IMe4) and DipTerAs(IMe4), which is additionally shown for diarsenes.
RESUMO
Dipnictenes of the type RE=ER (E=P, As, Sb, Bi) are the isovalence electronic heavier analogs of alkenes. Although diphosphenes and dipnictenes in general show a variety of binding modes in metal complexes, little is known about haptotropic shift reactions involving these ligands. Herein, we report an unprecedented η2 to η1 rearrangement of the dipnictene ligands in titanocene complexes of the type Cp2Ti(Pn2Ar2) (Pn=P, As; Ar=2,4,6-Me3-C6H2, Mes; 2,6-iPr2-C6H3, Dip; 2,4,6-iPr3-C6H2, Tip), initiated by Lewis basic ligands (L=MeCN, PMe3, AdNC, CO). In the presence of L the dipnictene ligand changes its hapticity from η2 to η1 and complexes of the general form Cp2Ti(L)(Pn2Ar2) with a succinctly different electronic structure are obtained. Electronically, the new complexes are best described as biradicaloids with antiferromagnetically coupled (via a π-bond) [Cp2TiIII]â + and [Pn2Ar2]â - fragments. However, the biradical character of these systems is affected by the electronic features of the co-ligand and significantly decreases moving from PMe3/MeCN (σ-donors) to CNAd/CO (σ-donors/π-acceptors).
RESUMO
NHC-phosphinidene (NHCP) adducts are an emerging class of ligands with proven binding ability for main group and transition metal elements. They possess electron-rich P atoms with two lone pairs (LPs) of electrons, making them interesting platforms for the formation of multimetallic complexes. We describe herein a modular, high-yielding synthesis of bis(NHCP)s, starting from alkylidene-bridged bis(NHC)s ((IMe)2CnH2n; n = 1,3) and triphosphirane (PDip)3 (Dip = 2,6-iPr2C6H3) as phosphinidene transfer reagent. The coordination chemistry of [{DipP(IMe)}2CH2], 1, was studied in detail, and complexes [1·FeBr2] and [1·Rh(cod)]Cl were prepared, showing that the ligand has a flexible bite angle. The dicarbonyl complex [1·Rh(CO)2]Cl, with an average value for the CO stretching frequency of 2029 cm-1, indicates a strongly donating ligand when compared to related complexes. The binding ability of the remaining two phosphorus LPs was demonstrated with AuCl(SMe2), giving the heterotrimetallic complex [1·(AuCl)2·Rh(cod)]Cl. Moreover, [1·Rh(cod)]X (X- = Cl, B(3,5-(CF3)2-C6H3)4) was tested in the catalytic hydrogenation of methyl-Z-α-acetamidocinnamate (MAC) and dimethyl itaconate (ItMe2), revealing that the chloride complex was inactive, while the BArF complex demonstrated moderate activity. Additionally, [1·Rh(cod)]Cl was shown to be moderately air- and moisture-stable, slowly decomposing to the corresponding NHC-stabilized bis-dioxophosphorane, which was independently synthesized by treating the free ligand with dry O2.
RESUMO
In this contribution we describe the general use of aryl-substituted triphosphiranes (Ar3P3; Ar = Mes, Dip, Tip) as phosphinidene transfer reagents towards N-heterocyclic carbenes (NHCs) to give a library of twelve N-heterocyclic carbene phosphinidene adducts of the type ArPîNHC (NHCPs), in which the NHCs have varying steric profiles, allowing a systematic evaluation of their structural and NMR-spectroscopic properties. In the next series of experiments we utilized 1,3- and 1,4-phenylene bridged bis-NHCs to access a new class of chelating bis(NHCP)s, of which three derivatives could be structurally characterized. The 1,4-phenylene derivatives were shown to be susceptible to P-CNHC bond cleavage when irradiated with an LED (396 nm), providing a rare example of phosphinidene release from NHCPs. The coordination chemistry of 1,3-phenylene bridged bis(NHCP)s towards GeCl2(dioxane) and GaI3 was investigated and revealed the formation of ion-separated cationic complexes, with significant charge transfer from the ligand to the metal center according to NBO analyses.
RESUMO
Primary and secondary amines selectively react with the lactone moiety of γ-valerolactone oxide (GVLO). Several primary amines afforded the resulting epoxyamides with an intact epoxy group. In some cases addition of two equivalents of amine resulted in additional epoxide opening to give α,γ-dihydroxy-ß-amino-amides. The selective lactone-opening in GVLO was further corroborated by DFT-studies.
RESUMO
Phosphaalumenes are the heavier isoelectronic analogs of alkynes and have eluded facile synthesis until recently. We have reported that the combination of a phosphinidene transfer agent, Ar TerP(PMe3 ) (Ar Ter=2,6-Ar2 -C6 H3 ), with (Cp*Al)4 (Cp*=C5 (CH3 )5 ) afforded the phosphaalumenes Ar TerPAlCp* as isolable, violet, thermally stable compounds. In here we describe attempts to utilize Mes*P(PMe3 ) (Mes*=2,4,6-tBu3 -C6 H2 ) as a phosphinidene source in combination with different Al(I) precursors, namely Dip NacnacAl (Dip Nacnac=HC[C(Me)NDip]2 , Dip=2,6-iPr2 -C6 H3 ), (Cp*Al)4 and Cp3t Al (Cp3t =1,2,4-tBu3 -C5 H2 ). In all cases the formation of phosphaalumenes was not observed, however, their intermediate formation is indicated by formation of the dimer [Cp*Al(µ-PMes*)]2 (2) and C-H-bond activation products along the putative P=Al bond, giving unusual 1,2-P,Al-tetrahydronaphtalene derivatives 1 and 4, clearly underlining the role the sterically demanding group on phosphorus plays in these transformations. The reactivity studies are supported by theoretical studies, demonstrating a thermodynamic preference for the C-H activation products. Additionally, we show that there are potential pitfalls in the synthesis of Cp*2 AlH, the precursor to make (Cp*Al)4 and give recommendations how to circumvent these.
RESUMO
Heterocycles containing group 13 and 15 elements such as borazines are an integral part of organic, biomedical and materials chemistry. Surprisingly, heterocycles containing P and Al are rare. We have now utilized phosphaalumenes in reactions with alkynes, alkenes and conjugated double bond systems. With sterically demanding alkynes 1,2-phosphaalumetes were afforded, whereas the reaction with HCCH or HCCSiMe3 gave 1,4-phosphaaluminabarrelenes. Using styrene saturated 1,2-phosphaalumates were formed, which reacted further with additional styrene to give different regio-isomers of 1,4-aluminaphosphorinanes. Using ethylene, a 1,4-aluminaphosphorinane is obtained, while with 1,3-butadiene a bicyclic system containing an aluminacyclopentane and a phosphirane unit was synthesized. The experimental work is supported by theoretical studies to shed light on the mechanism governing the formation of these heterocycles.
RESUMO
In here we present the deoxygenation of the chalcogen oxides EO2 (E = S, Se) with R-P(PMe3), so-called phospha-Wittig reagents. The reaction of DABSO (DABCO·2SO2) with R-P(PMe3) (R = Mes*, 2,4,6-tBu3-C6H2; MesTer, 2,6-(2,4,6-Me3-C6H2)2-C6H3) resulted in the formation of thiadiphosphiranes (RP)2S (1:R), while selenadiphosphiranes (RP)2Se (2:R) were afforded with SeO2, both accompanied by the formation of OPMe3. Utilizing the sterically more encumbered DipTer-P(PMe3) (DipTer = 2,6-(2,6-iPr2-C6H3)2-C6H3) a different selectivity was observed and (DipTerP)2Se (2:DipTer) along with [Se(µ-PDipTer)]2 (3:DipTer) were isolated as the Se-containing species in the reaction with SeO2. Interestingly, the reaction with DABSO (or with equimolar ratios of SeO2 at elevated temperatures) gave rise to the formation of the OPMe3-stabilized dioxophosphorane (phosphinidene dioxide) DipTerP(O)2-OPMe3 (4:DipTer) as the main product. This contrasting reactivity can be rationalized by two potential pathways in the reaction with EO2: (i) a Wittig-type pathway and (ii) a pathway involving oxygenation of the phospha-Wittig reagents and release of SO. Thus, phospha-Wittig reagents are shown to be useful synthetic tools for the metal-free deoxygenation of EO2 (E = S, Se).
Assuntos
Óxidos , Indicadores e ReagentesRESUMO
The isolation of the first diarsene radical anion by reduction of a neutral diarsene is presented. Comprehensive characterisation in conjunction with DFT calculations reveals unpaired spin density residing in the antibonding π*-orbital with involvement of the terphenyl ligands. First reactivity studies reveal no pronounced radical, but rather reducing properties.
RESUMO
The synthesis of P,N-phosphaalkene ligands, py-CHâPMes* (1, py = 2-pyridyl, Mes* = 2,4,6-tBu-C6H2) and the novel quin-CHâPMes* (2, quin = 2-quinolinyl) is described. The reaction with [Rh(µ-Cl)cod]2 produces Rh(I) bis(phosphaalkene) chlorido complexes 3 and 4 with distorted trigonal bipyramidal coordination environments. Complexes 3 and 4 show a pronounced metal-to-ligand charge transfer (MLCT) from Rh into the ligand PâC π* orbitals. Upon heating, quinoline-based complex 4 undergoes twofold C-H bond activation at the o-tBu groups of the Mes* substituents to yield the cationic bis(phosphaindane) Rh(I) complex 5, which could not be observed for the pyridine-based analogue 3. Using sub- or superstoichiometric amounts of AgOTf the C-H bond activation at an o-tBu group of one or at both Mes* was detected, respectively. Density functional theory (DFT) studies suggest an oxidative proton shift pathway as an alternative to a previously reported high-barrier oxidative addition at Rh(I). The Rh(I) mono- and bis(phosphaindane) triflate complexes 6 and 7, respectively, undergo deprotonation at the benzylic CH2 group of the phosphaindane unit in the presence of KOtBu to furnish neutral, distorted square-planar Rh(I) complexes 8 and 9, respectively, with one of the P,N ligands being dearomatized. All complexes were fully characterized, including multinuclear NMR, vibrational, and ultraviolet-visible (UV-vis) spectroscopy, as well as single-crystal X-ray and elemental analysis.
RESUMO
Phosphanylidenephosphoranes of the type R-P(PR'3), also known as phospha-Wittig reagents, can be utilized in a variety of bond activation reactions exploiting their phosphinidenoid reactivity. Herein, we thoroughly show that a facile PMe3 for H2O exchange gives access to various primary phosphine oxides of the general formula RP(H)2O (R = Mes*, MesTer, DipTer) and the molecular structure of DipTerP(O)H2 was determined. However, phosphanylidenephosphoranes are described to be highly nucleophilic as well. We show that the attachment of main group Lewis acids such as GaCl3 and GaI3 to R-P(PMe3) yielded the highly sensitive, yet stable coordination compounds [(RPGaX3)PMe3] (R = Mes*, DipTer) or [(RPPMe3)2GaCl2]GaCl4 (R = MesTer). In contrast to the free phosphanylidenephosphoranes, these species reacted differently with H2O, which was demonstrated for [(Mes*PPMe3)GaI3]. Here the formation of the phosphino-phosphonium cation [Mes*P(H)PMe3]+ and different anions was observed with combined NMR spectroscopic and SC-XRD (SC-XRD = single crystal X-ray diffraction analysis) studies. This work demonstrates that the ambiphilic character of phosphanylidenephosphoranes can be utilized to manipulate the reactivity of R-P(PMe3) towards water, giving primary phosphine oxides, whereas the Lewis acid adducts [(RPGaX3)PMe3] gave phosphino-phosphonium species.
RESUMO
N-containing molecules are mostly derived from ammonia (NH3 ). Ammonia activation has been demonstrated for single transition metal centers as well as for low-valent main group species. Phosphinidenes, mono-valent phosphorus species, can be stabilized by phosphines, giving so-called phosphanylidenephosphoranes of the type RP(PR'3 ). We demonstrate the facile, metal-free NH3 activation using ArP(PMe3 ), affording for the first time isolable secondary aminophosphines ArP(H)NH2 . DFT studies reveal that two molecules of NH3 act in concert to facilitate an NH3 for PMe3 exchange. Furthermore, H2 NR and HNR2 activation is demonstrated.
RESUMO
Classically tetraaryl diphosphanes have been synthesized through Wurtz-type reductive coupling of halophosphanes R2PX or more recently, through the dehydrocoupling of phosphines R2PH. Catalytic variants of the dehydrocoupling reaction have been reported, but are limited to R2PH compounds. Using PEt3 as a catalyst, we now show that TipPBr2 (Tip = 2,4,6-iPr3C6H2) is selectively coupled to give the dibromodiphosphane (TipPBr)2 (1), a compound not accessible using classic Mg reduction. Surprisingly, when using DipPBr2 (Dip = 2,6-iPr3C6H3) in the PEt3 catalysed reductive coupling the diphosphene (PDip)2 (2) with a PîP double was formed selectively. In benzene solutions (PDip)2 has a half life time of ca. 28 days and can be utilized with NHCs to access NHC-phosphinidene adducts. To show that this protocol is more widely applicable, we show that Ph2PCl and Mes2PX (X = Cl, Br) are efficiently coupled using 10 mol% of PEt3 to give (Ph2P)2 and (Mes2P)2, respectively. Control experiments show that [BrPEt3]Br is a potential oxidation product in the catalytic cycle, which can be debrominated by Zn dust as a sacrificial reductant.
RESUMO
Using the AlI precursor Cp3t Al in conjunction with triphosphiranes (PAr)3 (Ar=Mes, Dip, Tip) we have succeeded in preparing Lewis base-free cyclic diphosphadialanes with both the Al and Pâ atoms bearing three substituents. Using the sterically more demanding Dip and Tip substituents the first 1,2-diphospha-3,4-dialuminacyclobutanes were obtained, whereas with Mes substituents [Cp3t Al(µ-PMes)]2 is formed. This divergent reactivity was corroborated by DFT studies, which indicated the thermodynamic preference for the 1,2-diphospha-3,4-dialuminacyclobutane form for sterically more demanding groups on phosphorus. Using Cp*Al we could extend this concept to the corresponding cyclic diarsadialanes [Cp*Al(µ-AsAr)]2 (Ar=Dip, Tip) and additionally add the phosphorus variants [Cp*Al(µ-PAr)]2 (P=Mes, Dip, Tip). The reactivity of one variant [Cp3t Al(µ-PPh)]2 towards NHCs was tested and resulted in double NHC-stabilised [Cp3t (IiPr2 )Al(µ-PPh)]2 .
RESUMO
1,3-Phosphaazaallenes are heteroallenes of the type RP[double bond, length as m-dash]C[double bond, length as m-dash]NR' and little is known about their reactivity. In here we describe the straightforward synthesis of ArPCNR (Ar = Mes*, 2,4,6-tBu-C6H2; MesTer, 2.6-(2,4,6-Me3C6H2)-C6H3; DipTer, 2.6-(2,6-iPr2C6H2)-C6H3; R = tBu; Xyl, 2,6-Me2C6H3) starting from phospha-Wittig reagents ArPPMe3 and isonitriles CNR. It is further shown that ArPCNtBu are thermally labile with respect to the loss of iso-butene and it is shown that the cyanophosphines ArP(H)CN are synthetically feasible and form the corresponding phosphanitrilium borates with B(C6F5)3, whereas deprotonation of DipTerP(H)CN was shown to give an isolable cyanidophosphide. Lastly, the reactivity of ArPCNR towards Pier's borane was investigated, showing hydroboration of the C[double bond, length as m-dash]N bond in Mes*PCNtBu to give a hetero-butadiene, while with DipTerPCNXyl the formation of the Lewis acid-base adduct with a B-P linkage was observed.
RESUMO
The phospha-Wittig reagent MesTerPPMe3 (MesTer = 2,6-{2,4,6-Me3-C6H2}-C6H3) and arsa-Wittig reagent DipTerAsPMe3 (DipTer = 2,6-{2,6-iPr2-C6H3}-C6H3) have been employed to synthesize the titanocene complexes Cp2Ti(PMe3)PnAr (Pn = P, As) with terminal phosphinidene or arsinidene ligands, respectively. Ab initio studies show that the description as singlet biradicaloids in their ground state is warranted.
RESUMO
The combination of (AlCp*)4, a source of monomeric :AlCp* at elevated temperatures, with DipTerPnPMe3 (Pn = P, As), so-called pnicta-Wittig reagents, at 80 °C cleanly gives the pnictaalumenes DipTerPnAlCp* with polarized Pn-Al double bonds and intramolecular stabilization through interactions of Al with a flanking aryl group of the terphenyl substituent on Pn. In contrast, using MesTerPPMe3, the reaction with 2 equiv of :AlCp3t or :AlCp* afforded the three-membered 2π-aromatic ring systems MesTerP(AlCpx)2 (x = 3t, *).
RESUMO
Phospha-Wittig reagents, RPPMe3 (R = Mes* 2,4,6-tBu3-C6H2; MesTer 2,6-(2,4,6-Me3C6H2)-C6H3; DipTer 2,6-(2,6-iPr2C6H3)-C6H3), can be considered as phosphine-stabilized phosphinidenes. In this study we show that PMe3 can be displaced by NHCs or NHOs. Interestingly, phosphinidene-like reactivity results in a subsequent C(sp2)-H activation of the exocyclic CH2 group in NHOs. This concept was further extended to allyl-apended NHOs, which resulted in phosphine-substituted allyl species.