RESUMO
Sprouting angiogenesis is a core biological process critical to vascular development. Its accurate simulation, relevant to multiple facets of human health, is of broad, interdisciplinary appeal. This study presents an in-silico model replicating a microfluidic assay where endothelial cells sprout into a biomimetic extracellular matrix, specifically, a large-pore, low-concentration fibrin-based porous hydrogel, influenced by chemotactic factors. We introduce a novel approach by incorporating the extracellular matrix and chemotactic factor effects into a unified term using a single parameter, primarily focusing on modelling sprouting dynamics and morphology. This continuous model naturally describes chemotactic-induced sprouting with no need for additional rules. In addition, we extended our base model to account for matrix sensing and degradation, crucial aspects of angiogenesis. We validate our model via a hybrid in-silico experimental method, comparing the model predictions with experimental results derived from the microfluidic setup. Our results underscore the intricate relationship between the extracellular matrix structure and angiogenic sprouting, proposing a promising method for predicting the influence of the extracellular matrix on angiogenesis.
RESUMO
The process of fission and vesicle formation depends on the geometry of the membrane that will split. For instance, a flat surface finds it difficult to form vesicles because of the lack of curved regions where to start the process. Here we show that vesicle formation can be promoted by temperature, by using a membrane phase field model with Gaussian curvature. We find a phase transition between fluctuating and vesiculation phases that depends on temperature, spontaneous curvature, and the ratio between bending and Gaussian moduli. We analysed the energy dynamical behaviour of these processes and found that the main driving ingredient is the Gaussian energy term, although the curvature energy term usually helps with the process as well. We also found that the chemical potential can be used to investigate the temperature of the system. Finally we address how temperature changes the condition for spontaneous vesiculation for all geometries, making it happen in a wider range of values of the Gaussian modulus.
RESUMO
Plasmodium vivax is the most widely distributed human malaria parasite representing 36.3% of disease burden in the South-East Asia region and the most predominant species in the region of the Americas. Recent estimates indicate that 3.3 billion of people are under risk of infection with circa 7 million clinical cases reported each year. This burden is certainly underestimated as the vast majority of chronic infections are asymptomatic. For centuries, it has been widely accepted that the only source of cryptic parasites is the liver dormant stages known as hypnozoites. However, recent evidence indicates that niches outside the liver, in particular in the spleen and the bone marrow, can represent a major source of cryptic chronic erythrocytic infections. The origin of such chronic infections is highly controversial as many key knowledge gaps remain unanswered. Yet, as parasites in these niches seem to be sheltered from immune response and antimalarial drugs, research on this area should be reinforced if elimination of malaria is to be achieved. Due to ethical and technical considerations, working with the liver, bone marrow and spleen from natural infections is very difficult. Recent advances in the development of humanized mouse models and organs-on-a-chip models, offer novel technological frontiers to study human diseases, vaccine validation and drug discovery. Here, we review current data of these frontier technologies in malaria, highlighting major challenges ahead to study P. vivax cryptic niches, which perpetuate transmission and burden.
Assuntos
Antimaláricos , Malária Vivax , Malária , Animais , Medula Óssea/parasitologia , Modelos Animais de Doenças , Humanos , Malária/tratamento farmacológico , Malária Vivax/prevenção & controle , Camundongos , Plasmodium vivaxRESUMO
We present a series of experiments with droplets of aqueous cyclodextrin-surfactant solutions, in which the volume is reduced after the equilibrium spherical shape is reached. The final shape of the drop after this perturbation is found to be dependent on the concentration of inclusion complexes in the bulk of the solution. These inclusion complexes are formed by two cyclodextrin molecules and one surfactat molecule. We propose a model to describe these dynamical processes. Dipole-dipole interactions on the surface of the drop trigger a competition between water surface tension and dipole-dipole interaction energies. The results of the model reproduce the spherical and rod-like shapes found in the experiments.
Assuntos
Ciclodextrinas , Surfactantes Pulmonares , Tensão Superficial , Tensoativos , ÁguaRESUMO
The rheological properties of blood depend highly on the properties of its red blood cells: concentration, membrane elasticity, and aggregation. These properties affect the viscosity of blood as well as its shear thinning behavior. Using an experimental analysis of the interface advancement of blood in a microchannel, we determine the viscosity of different samples of blood. In this work, we present two methods that successfully normalize the viscosity of blood for a single and for different donors, first according to the concentration of erythrocytes and second according to the shear rate. The proposed methodology is able to predict the health conditions of the blood samples by introducing a non-dimensional coefficient that accounts for the response to shear rate of the different donors blood samples. By means of these normalization methods, we were able to determine the differences between the red blood cells of the samples and define a range where healthy blood samples can be described by a single behavior.
RESUMO
In this article, we describe the general features of red blood cell membranes and their effect on blood flow and blood rheology. We first present a basic description of membranes and move forward to red blood cell membranes' characteristics and modeling. We later review the specific properties of red blood cells, presenting recent numerical and experimental microfluidics studies that elucidate the effect of the elastic properties of the red blood cell membrane on blood flow and hemorheology. Finally, we describe specific hemorheological pathologies directly related to the mechanical properties of red blood cells and their effect on microcirculation, reviewing microfluidic applications for the diagnosis and treatment of these diseases.
RESUMO
Combining single cell experiments, population dynamics and theoretical methods of membrane mechanics, we put forward that the rate of cell proliferation in E. coli colonies can be regulated by modifiers of the mechanical properties of the bacterial membrane. Bacterial proliferation was modelled as mediated by cell division through a membrane constriction divisome based on FtsZ, a mechanically competent protein at elastic interaction against membrane rigidity. Using membrane fluctuation spectroscopy in the single cells, we revealed either membrane stiffening when considering hydrophobic long chain fatty substances, or membrane softening if short-chained hydrophilic molecules are used. Membrane stiffeners caused hindered growth under normal division in the microbial cultures, as expected for membrane rigidification. Membrane softeners, however, altered regular cell division causing persistent microbes that abnormally grow as long filamentous cells proliferating apparently faster. We invoke the concept of effective growth rate under the assumption of a heterogeneous population structure composed by distinguishable individuals with different FtsZ-content leading the possible forms of cell proliferation, from regular division in two normal daughters to continuous growing filamentation and budding. The results settle altogether into a master plot that captures a universal scaling between membrane rigidity and the divisional instability mediated by FtsZ at the onset of membrane constriction.
Assuntos
Membrana Celular/metabolismo , Proliferação de Células/fisiologia , Escherichia coli/crescimento & desenvolvimento , Proteínas de Bactérias/metabolismo , Proteínas de Ciclo Celular/metabolismo , Divisão Celular/genética , Divisão Celular/fisiologia , Membrana Celular/fisiologia , Proteínas do Citoesqueleto/metabolismo , Escherichia coli/metabolismo , Proteínas de Escherichia coli/metabolismo , Proteínas de Membrana/metabolismo , Membranas/metabolismoRESUMO
The spleen is a hematopoietic organ that participates in cellular and humoral immunity. It also serves as a quality control mechanism for removing senescent and/or poorly deformable red blood cells (RBCs) from circulation. Pitting is a specialized process by which the spleen extracts particles, including malaria parasites, from within circulating RBCs during their passage through the interendothelial slits (IES) in the splenic cords. To study this physiological function in vitro, we have developed two microfluidic devices modeling the IES, according to the hypothesis that at a certain range of mechanical stress on the RBC, regulated through both slit size and blood flow, would force it undergo the pitting process without affecting the cell integrity. To prove its functionality in replicating pitting of malaria parasites, we have performed a characterization of P. falciparum-infected RBCs (P.f.-RBCs) after their passage through the devices, determining hemolysis and the proportion of once-infected RBCs (O-iRBCs), defined by the presence of a parasite antigen and absence of DAPI staining of parasite DNA using a flow cytometry-based approach. The passage of P.f.-RBCs through the devices at the physiological flow rate did not affect cell integrity and resulted in an increase of the frequency of O-iRBCs. Both microfluidic device models were capable to replicate the pitting of P.f.-RBCs ex vivo by means of mechanical constraints without cellular involvement, shedding new insights on the role of the spleen in the pathophysiology of malaria.
Assuntos
Endotélio/parasitologia , Dispositivos Lab-On-A-Chip/parasitologia , Malária Falciparum/parasitologia , Parasitos/fisiologia , Baço/parasitologia , Animais , Biomimética/métodos , Eritrócitos/parasitologia , Hemólise/fisiologia , Humanos , Plasmodium falciparum/fisiologiaRESUMO
The purpose of this work is to develop a hematocrit-independent method for the detection of beta-thalassemia trait (ß-TT) and iron deficiency anemia (IDA), through the rheological characterization of whole blood samples from different donors. The results obtained herein are the basis for the development of a front microrheometry point-of-care device for the diagnosis and clinical follow-up of ß-TT patients suffering hematological diseases and alterations in the morphology of the red blood cell (RBC). The viscosity is calculated as a function of the mean front velocity by detecting the sample fluid-air interface advancing through a microfluidic channel. Different viscosity curves are obtained for healthy donors, ß-TT and IDA samples. A mathematical model is introduced to compare samples of distinct hematocrit, classifying the viscosity curve patterns with respect to the health condition of blood. The viscosity of the fluid at certain shear rate values varies depending on several RBC factors such as shape and size, hemoglobin (Hb) content, membrane rigidity and hematocrit concentration. Blood and plasma from healthy donors are used as reference. To validate their potential clinical value as a diagnostic tool, the viscosity results are compared to those obtained by the gold-standard method for RBC deformability evaluation, the Laser-Optical Rotational Red Cell Analyzer (LoRRCA).
RESUMO
Studies on the mechanical properties of red blood cells improve the diagnosis of some blood-related diseases. Some existing numerical methods have successfully simulated the coupling between a fluid and red blood cells. This paper introduces an alternative phase-field model formulation of two-dimensional cells that solves the vorticity and stream function that simplifies the numerical implementation. We integrate red blood cell dynamics immersed in a Poiseuille flow and reproduce previously reported morphologies (slippers or parachutes). In the case of flow in a very wide channel, we discover a new metastable shape referred to as 'anti-parachute' that evolves into a horizontal slipper centered on the channel. This sort of metastable morphology may contribute to the dynamical response of the blood.
Assuntos
Eritrócitos , Hidrodinâmica , Movimento Celular , Forma Celular , Fenômenos FísicosRESUMO
The motivation for this study was to develop a microdevice for the precise rheological characterization of biofluids, especially blood. The method presented was based on the principles of rheometry and fluid mechanics at the microscale. Traditional rheometers require a considerable amount of space, are expensive, and require a large volume of sample. A mathematical model was developed that, combined with a proper experimental model, allowed us to characterize the viscosity of Newtonian and non-Newtonian fluids at different shear rates. The technology presented here is the basis of a point-of-care device capable of describing the nonlinear rheology of biofluids by the fluid/air interface front velocity characterization through a microchannel. The proposed microrheometer uses a small amount of sample to deliver fast and accurate results, without needing a large laboratory space. Blood samples from healthy donors at distinct hematocrit percentages were the non-Newtonian fluid selected for the study. Water and plasma were employed as testing Newtonian fluids for validation of the system. The viscosity results obtained for the Newtonian and non-Newtonian fluids were consistent with pertinent studies cited in this paper. In addition, the results achieved using the proposed method allowed distinguishing between blood samples with different characteristics.
RESUMO
We propose a three-dimensional mathematical model to describe dynamical processes of membrane fission. The model is based on a phase field equation that includes the Gaussian curvature contribution to the bending energy. With the addition of the Gaussian curvature energy term numerical simulations agree with the predictions that tubular shapes can break down into multiple vesicles. A dispersion relation obtained with linear analysis predicts the wavelength of the instability and the number of formed vesicles. Finally, a membrane shape diagram is obtained for the different Gaussian and bending modulus, showing different shape regimes.
RESUMO
A recent surface rheological study has shown that aqueous solutions of α-cyclodextrin (αCD) with anionic surfactants (S) display a remarkable viscoelasticity at the liquid/air interface, which has not been observed in similar systems. The dilatational modulus is various orders of magnitude larger than those for the binary mixtures αCD + water and S + water. The rheological response has been qualitatively related to the bulk distribution of species, the 2 : 1 inclusion complexes (αCD2 : S) playing a fundamental role. In this work, we have developed a model that considers dipole-dipole interactions between 2 : 1 inclusion complexes ordered on the liquid/air interface. When the model is applied to the specific experimental conditions, the dependencies on concentration and temperature of the dilatational modulus and the surface tension were found to be in excellent agreement with the data, indicating clearly that dipole-dipole interactions determine and control the rheological behavior of the interface.
RESUMO
Point-of-care devices can analyze or characterize a sample in a short time. New technologies in medical science seek integrations of different measurement techniques for a complete analysis. This study describes the fabrication method, tests, and results of microtechnology as an approach for an integrated rheometer. The portable device measured the average flow velocity to calculate its viscosity. The whole system encompasses a microdevice integrated to a data acquisition system powered by USB and controlled by full custom software. As a result, we obtained an easy-to-handle and fabricate hand-held microrheometer. The device was tested using Newtonian fluids such as Mili-Q water, an aqueous solution of Ethylene-glycol at 40% and 25% and Non-Newtonian blood samples. The whole device can provide the non-linear viscosity of a 0.08 ml blood sample in less than 30 seconds, in a wide range of shear rate with an accuracy of 93%. More importantly, due to its detection method and simplicity, it can be enclosed within almost any fluidic microsystem, including biomedical applications.
Assuntos
Software , Reologia , ViscosidadeRESUMO
A coaxial flow focusing PDMS (polydimethylsiloxane) microfluidic device has been designed and manufactured by soft lithography in order to experimentally study a miscible inner flow. We studied a coaxially focused inner flow (formed by an aqueous fluorescein solution) which was fully isolated from all microchannel surfaces by an additional water outer flow. Different flow rates were used to produce a variety of flow ratios and a 3D reconstruction of the cross-section was performed using confocal microscope images. The results showed an elliptical section of the coaxially focused inner flow that changes in shape depending on the flow rate ratio applied. We have also developed a mathematical model that allows us to predict and control the geometry of the coaxially focused inner flow.
RESUMO
We study the flow properties of red blood cells in confined channels, when the channel width is comparable to the cell size. We focus on the case of intermediate concentrations when hydrodynamic interactions between cells play a dominant role. This regime is different to the case of low concentration in which the cells behave as hydrodynamically isolated. In this last case, the dynamic behavior is entirely controlled by the interplay between the interaction with the wall and the elastic response of the cell membrane. Our results highlight the different fluid properties when collective flow is present. The cells acquire a characteristic slipper shape, and parachute shapes are only observed at very large capillary numbers. We have characterized the spatial ordering and the layering by means of a pairwise correlation function. Focusing effects are observed at the core of the channel instead of at the lateral position typical of the single-train case. These results indicate that at these intermediate concentrations we observed at the microscale the first steps of the well-known macroscopic Fahraeus-Lindqvist effect. The rheological properties of the suspension are studied by means of the effective viscosity, with an expected shear-thinning behavior. Two main differences are obtained with respect to the single-train case. First, a large magnitude of the viscosity is obtained indicating a high resistance to flow. Secondly, the shear-thinning behavior is obtained at larger values of the capillary number respect to the single-train case. These results suggest that the phenomena of ordering in space and orientation occur at higher values of the capillary number.
RESUMO
Phase-field models have been extensively used to study interfacial phenomena, from solidification to vesicle dynamics. In this article, we analyze a phase-field model that captures the relevant physical features that characterize biological membranes. We show that the Helfrich theory of elasticity of membranes can be applied to phase-field models, allowing to derive the expressions of the stress tensor, lateral stress profile and elastic moduli. We discuss the relevance and interpretations of these magnitudes from a phase-field perspective. Taking the sharp-interface limit we show that the membrane macroscopic equilibrium equation can be derived from the equilibrium condition of the phase-field interface. We also study two dynamic models that describe the behaviour of a membrane. From the study of the relaxational behaviour of the membrane we characterize the relevant dynamics of each model, and discuss their applications.
Assuntos
Membrana Celular/química , Elasticidade , Modelos Teóricos , Simulação de Dinâmica MolecularRESUMO
We propose an experimental and theoretical framework for the study of capillary filling at the micro-scale. Our methodology enables us to control the fluid flow regime so that we can characterise properties of Newtonian fluids such as their viscosity. In particular, we study a viscous, non-inertial, non-Washburn regime in which the position of the fluid front increases linearly with time for the whole duration of the experiment. The operating shear-rate range of our apparatus extends over nearly two orders of magnitude. Further, we analyse the advancement of a fluid front within a microcapillary in a system of two immiscible Newtonian liquids. We observe a non-Washburn regime in which the front can accelerate or decelerate depending on the viscosity contrast between the two liquids. We then propose a theoretical model which enables us to study and explain both non-Washburn regimes. Furthermore, our theoretical model allows us to put forward ways to control the emergence of these regimes by means of geometrical parameters of the experimental set-up. Our methodology allows us to design and calibrate a micro-viscosimetre which works at constant pressure.
Assuntos
Viscosidade , Modelos TeóricosRESUMO
Understanding fluid dynamics under extreme confinement, where device and intrinsic fluid length scales become comparable, is essential to successfully develop the coming generations of fluidic devices. Here we report measurements of advancing fluid fronts in such a regime, which we dub superconfinement. We find that the strong coupling between contact-line friction and geometric confinement gives rise to a new stability regime where the maximum speed for a stable moving front exhibits a distinctive response to changes in the bounding geometry. Unstable fronts develop into drop-emitting jets controlled by thermal fluctuations. Numerical simulations reveal that the dynamics in superconfined systems is dominated by interfacial forces. Henceforth, we present a theory that quantifies our experiments in terms of the relevant interfacial length scale, which in our system is the intrinsic contact-line slip length. Our findings show that length-scale overlap can be used as a new fluid-control mechanism in strongly confined systems.
RESUMO
Biological membranes are complex structures whose mechanics are usually described at a mesoscopic level, such as the Helfrich bending theory. In this article, we present the phase-field methods, a useful tool for studying complex membrane problems which can be applied to very different phenomena. We start with an overview of the general theory of elasticity, paying special attention to its derivation from a molecular scale. We then study the particular case of membrane elasticity, explicitly obtaining the Helfrich bending energy. Within the framework of this theory, we derive a phase-field model for biological membranes and explore its physical basis and interpretation in terms of membrane elasticity. We finally explain three examples of applications of these methods to membrane related problems. First, the case of vesicle pearling and tubulation, when lipidic vesicles are exposed to the presence of hydrophobic polymers that anchor to the membrane, inducing a shape instability. Finally, we study the behavior of red blood cells while flowing in narrow microchannels, focusing on the importance of membrane elasticity to the cell flow capabilities.