C(sp2)-H selenylation of substituted benzo[4,5]imidazo[2,1-b]thiazoles using phenyliodine(iii)bis(trifluoroacetate) as a mediator.

Herein, an expeditious metal-free regioselective C-H selenylation of substituted benzo[4,5]imidazo[2,1-b]thiazole derivatives was devised to synthesize structurally orchestrated selenoethers with good to excellent yields. This PIFA [bis(trifluoroacetoxy)iodobenzene]-mediated protocol operates under mild conditions and offers broad functional group tolerance. In-depth mechanistic investigation supports the involvement of radical pathways. Furthermore, the synthetic utility of this methodology is portrayed through gram-scale synthesis.

Improving the accuracy of 31P NMR chemical shift calculations by use of scaling methods.

Calculation of 31P NMR chemical shifts for a series of tri- and tetracoordinate phosphorus compounds using several basis sets and density functional theory (DFT) functionals gave a modest fit to experimental chemical shifts, but an excellent linear fit when plotted against the experimental values. The resultant scaling methods were then applied to a variety of "large" compounds previously selected by Latypov et al. and a set of stereoisomeric and unusual compounds selected here. No one method was best for all structural types. For compounds that contain P-P bonds and P-C multiple bonds, the Latypov et al. method using the PBE0 functional was best (mean absolute deviation/root mean square deviation (MAD/RMSD) = 6.9/8.5 ppm and 6.6/8.2 ppm, respectively), but for the full set of compounds gave higher deviations (MAD/RMSD = 8.2/12.3 ppm), and failed by over 60 ppm for a three-membered phosphorus heterocycle. Use of the M06-2X functional for both the structural optimization and NMR chemical shift calculation was best overall for the compounds without P-C multiple bonds (MAD/RMSD = 5.4/7.1 ppm), but failed by 30-49 ppm for compounds having any P-C multiple-bond character. Failures of these magnitudes have not been reported previously for these widely used functionals. These failures were then used to screen a variety of recommended functionals, leading to better overall methods for calculation of these chemical shifts: optimization with the M06-2X functional and NMR calculation with the PBE0 or ωB97x-D functionals gave values for MAD/RMSD = 6.9/8.5 ppm and 6.8/9.1 ppm, respectively, over an experimental chemical shift range of -181 to 356 ppm. Due to the unexplained failures observed, we recommend use of more than one method when looking at novel structures.

Iron-Catalyzed Transfer Hydrogenation in Aged N-Methyl-2-pyrrolidone: Reductive Ring-Opening of 3,5-Disubstituted Isoxazoles and Isoxazolines.

3,5-Disubstituted isoxazoles and isoxazolines undergo an iron-catalyzed reductive ring-opening in aged N-methyl-2-pyrrolidone (NMP). 5-Hydroxy-N-methyl-2-pyrrolidone generated in situ via a simple activation of commercial NMP acts as the hydrogen donor in the iron-catalyzed transfer hydrogenation reaction. It is the first example employing a combination of an iron catalyst and 5-hydroxy-N-methyl-2-pyrrolidone as reducing agents in a transfer hydrogenation reaction. The protocol is highly efficient for the synthesis of ß-enaminones and 1,3-diketones, providing a versatile route for the preparation of these 1,3-difunctional compounds bearing diversified substitution patterns.

Maltol- and Allomaltol-Derived Oxidopyrylium Ylides: Methyl Substitution Pattern Kinetically Influences [5 + 3] Dimerization versus [5 + 2] Cycloaddition Reactions.

Oxidopyrylium ylides are useful intermediates in synthetic organic chemistry because of their capability of forming structurally complex cycloadducts. They can also self-dimerize via [5 + 3] cycloaddition, which is an oft-reported side reaction that can negatively impact [5 + 2] cycloadduct yields and efficiency. In select instances, these dimers can be synthesized and used as the source of oxidopyrylium ylide, although the generality of this process remains unclear. Thus, how the substitution pattern governs both dimerization and cycloaddition reactions is of fundamental interest to probe factors to regulate them. The following manuscript details our findings that maltol-derived oxidopyrylium ylides (i.e., with ortho methyl substitution relative to oxide) can be trapped prior to dimerization more efficiently than the regioisomeric allomaltol-derived ylide (i.e., with a para methyl substitution relative to oxide). Density functional theory studies provide evidence in support of a sterically (kinetically) controlled mechanism, whereby gauche interactions between appendages of the approaching maltol-derived ylides are privileged by higher barriers for dimerization and thus are readily intercepted by dipolarophiles via [5 + 2] cycloadditions.

Auto-Tandem Palladium Catalysis: From Isoxazole to 2-Azafluorenone.

An auto-tandem palladium catalysis from halogen-substituted isoxazoles and Michael acceptors is described. It involves two mechanistically distinct palladium-catalyzed reactions, a Heck reaction and a rearrangement, leading to 2-azafluorenones. It is the first example of palladium-catalyzed ring opening of isoxazoles and rearrangement of the ß-imino ketone ring-opening product.

Antimalarial activity of ruthenium(II) and osmium(II) arene complexes with mono- and bidentate chloroquine analogue ligands.

Eight new ruthenium and five new osmium p-cymene half-sandwich complexes have been synthesized, characterized and evaluated for antimalarial activity. All complexes contain ligands that are based on a 4-chloroquinoline framework related to the antimalarial drug chloroquine. Ligands HL(1-8) are salicylaldimine derivatives, where HL(1) = N-(2-((2-hydroxyphenyl)methylimino)ethyl)-7-chloroquinolin-4-amine, and HL(2-8) contain non-hydrogen substituents in the 3-position of the salicylaldimine ring, viz. F, Cl, Br, I, NO2, OMe and (t)Bu for HL(2-8), respectively. Ligand HL(9) is also a salicylaldimine-containing ligand with substitutions in both 3- and 5-positions of the salicylaldimine moiety, i.e. N-(2-((2-hydroxy-3,5-di-tert-butylphenyl)methyl-imino)ethyl)-7-chloroquinolin-4-amine, while HL(10) is N-(2-((1-methyl-1H-imidazol-2-yl)methylamino)ethyl)-7-chloroquinolin-4-amine) The half sandwich metal complexes that have been investigated are [Ru(η(6)-cym)(L(1-8))Cl] (Ru-1-Ru-8, cym = p-cymene), [Os(η(6)-cym)(L(1-3,5,7))Cl] (Os-1-Os-3, Os-5, and Os-7), [M(η(6)-cym)(HL(9))Cl2] (M = Ru, Ru-HL(9); M = Os, Os-HL(9)) and [M(η(6)-cym)(L(10))Cl]Cl (M = Ru, Ru-10; M = Os, Os-10). In complexes Ru-1-Ru-8 and Ru-10, Os-1-Os-3, Os-5 and Os-7 and Os-10, the ligands were found to coordinate as bidentate N,O- and N,N-chelates, while in complexes Ru-HL(9) and Os-HL(9), monodentate coordination of the ligands through the quinoline nitrogen was established. The antimalarial activity of the new ligands and complexes was evaluated against chloroquine sensitive (NF54 and D10) and chloroquine resistant (Dd2) Plasmodium falciparum malaria parasite strains. Coordination of ruthenium and osmium arene moieties to the ligands resulted in lower antiplasmodial activities relative to the free ligands, but the resistance index is better for the ruthenium complexes compared to chloroquine. Overall, osmium complexes appeared to be less active than the corresponding ruthenium complexes.

Synthesis of dinucleoside acylphosphonites by phosphonodiamidite chemistry and investigation of phosphorus epimerization.

The reaction of the diamidite, (iPr2N)2PH, with acyl chlorides proceeds with the loss of HCl to give the corresponding acyl diamidites, RC(O)P(N(iPr)2)2 (R = Me (7), Ph (9)), without the intervention of sodium to give a phosphorus anion. The structure of 9 was confirmed by single-crystal X-ray diffraction. The coupling of the diamidites 7 and 9 with 5'-O-DMTr-thymidine was carried out with N-methylimidazolium triflate as the activator to give the monoamidites 3'-O-(P(N(iPr)2)C(O)R)-5'-O-DMTr-thymidine, and further coupling with 3'-O-(tert-butyldimethylsilyl)thymidine was carried out with activation by pyridinium trifluoroacetate/N-methylimidazole. The new dinucleoside acylphosphonites could be further oxidized, hydrolyzed to the H-phosphonates, and sulfurized to give the known mixture of diastereomeric phosphorothioates. The goal of this work was the measurement of the barrier to inversion of the acylphosphonites, which was expected to be low by analogy to the low barrier found in acylphosphines. However, the barrier was found to be high as no epimerization was detected up to 150 °C, and consistent with this, density functional theory calculations give an inversion barrier of over 40 kcal/mol.

Synthesis of dibenzocyclohepten-5-ones by electrophilic iodocyclization of 1-([1,1'-biphenyl]-2-yl)alkynones.

A synthesis of iodo-substituted dibenzocyclohepten-5-ones by the iodine monochloride (or iodine)-induced intramolecular 7-endo-dig cyclization of 1-([1,1'-biphenyl]-2-yl)alkynones is reported. Detailed investigations on the substituent effects during the electrophilic iodocyclization of the alkynones show that they play a crucial role in determining the reaction pathways of the cyclization. By modifying the substitution pattern on the alkynone substrates, the cyclization takes place regioselectively, leading to either dibenzocyclohepten-5-ones, via a 7-endo-dig cyclization, or spiroconjugated compounds, via a 6-endo-dig cyclization.

ICl-induced intramolecular electrophilic cyclization of 1-[4'-methoxy(1,1'-biphenyl)2-yl]alkynones--a facile approach to spiroconjugated molecules.

Spiro compounds: An iodine monochloride-induced intramolecular cyclization of 1-[4'-methoxy(1,1'-biphenyl)2-yl]alkynones has been developed (see scheme). An electrophilic iodocyclization selectively takes place at the ipso position (versus the ortho electrophilic aromatic substitution) to afford 4'H-spiro(cyclohexa[2,5]diene-1,1'-naphthalene)-4,4'-diones, a new group of spiroconjugated compounds.

A non-Karplus effect: evidence from phosphorus heterocycles and DFT calculations of the dependence of vicinal phosphorus-hydrogen NMR coupling constants on lone-pair conformation.

In contrast to literature reports of a Karplus-type curve that correlates (3)J(PH) with phosphorus-hydrogen dihedral angle, a recently reported glycine-derived 1,3,2-oxazaphospholidine (7c) has two hydrogen atoms on the ring with identical PNCH dihedral angles but measured coupling constants of ∼6 and 1.5 Hz. DFT calculations were in accord with these values and suggested that the smaller coupling constant is negative. Experimental evidence of the opposite signs of these coupling constants was obtained by analysis of the ABX NMR spectrum of the new glycine-derived N-p-toluenesulfonyl phosphorus heterocycle 6c. DFT calculations on 6c and on Me(2)NPCl(2) and t-BuPCl(2) were also in accord with NMR data and allowed confirmation of unusual features including a lone pair effect on (3)J(PH), the negative coupling constant, temperature-dependent chemical shifts due to rotation about the sulfonamide S-N bond, and vicinal phosphorus-hydrogen coupling constants over 40 Hz. Calculation of phosphorus-hydrogen coupling constants both as a function of PYCH dihedral angle θ (Y = O, N, C) and lone pair-PYC dihedral angle ω shows similar θ,ω surfaces for (3)J(PH) with a range of (3)J(PH) from -4.4 to +51 Hz and demonstrates the large non-Karplus effect of lone-pair conformation on vicinal phosphorus-hydrogen coupling constants.

Synthesis of trisubstituted isoxazoles by palladium(II)-catalyzed cascade cyclization-alkenylation of 2-alkyn-1-one O-methyl oximes.

A palladium-catalyzed, cascade 5-endo-dig cyclization-alkenylation synthesis of isoxazoles has been developed. The addition of 1 equiv of n-Bu(4)NBr significantly increases the yield of the desired 4-alkenyl-3,4,5-trisubstituted isoxazoles. A variety of trisubstituted isoxazoles are prepared in moderate to excellent yields. One example of the synthesis of a naphthoisoxazole is reported by a cascade cyclization-alkenylation-Heck reaction.

Sulfurization of dinucleoside phosphite triesters with chiral disulfides.

Sixteen chiral analogues of phenylacetyl disulfide (PADS) and 5-methyl-3H-1,2,4-dithiazol-3-one (MEDITH) were used to sulfurize five dithymidine phosphite triesters, each incorporating a ß-cyanoethoxy or siloxy group. Each mixture of S(P):R(P) phosphite triester diastereomers was combined with approximately one fourth of an equivalent of each of the sulfurizing reagents, and the R(PS):S(PS) diastereomer ratios of the resulting phosphite sulfides or phosphorothioates were determined by reverse-phase HPLC. Diastereoselectivities and corresponding diastereomeric excess (de) values were calculated by correcting for the starting triester diastereomer ratios. The highest de values for R(PS) and S(PS) phosphorothioates were 14.7% and 7.9%, respectively, both using MEDITH analogues.

Stereoselective synthesis of P-chiral phosphorus compounds from N-tert-butoxycarbonyl amino acids.

Reaction of the N-t-Boc amino acids alanine and valine with PhPCl(2) gives the P-chiral trans-1,3,2-oxazaphospholidinones exclusively. Variable-temperature NMR and examination of the glycine derivative shows that the isomers observed are due to t-Boc rotation.

Synthesis and structural characterization of trivalent amino acid derived chiral phosphorus compounds.

Reaction of the N-toluenesulfonyl derivatives of (S)-alanine, phenylalanine, and valine (4-6) with PhPCl(2) gave in high yield the 4-methyl, benzyl, and isopropyl derivatives (7-9) of 2-phenyl-1-p-toluenesulfonyl-1,3,2-oxazaphospholidin-5-one. The ratios of the (2S,4S)/(2R,4S) diastereomers (cis/trans isomers) were 1:1, 2:1, and 10:1 for the methyl, benzyl, and isopropyl derivatives 7a,b, 8a,b, and 9a,b, respectively. For 7a,b, both isomers could be crystallized, but for the others only the major isomers were isolable. The X-ray crystal structure of 9a shows that the isopropyl and phenyl groups are mutually cis and that the tolyl moiety is oriented s-trans to both the isopropyl and phenyl groups. Reaction of 6 with Cl(2)PCH(2)CH(2)PCl(2) (10) gave a 56:38:7 mixture of the cis/cis, cis/trans, and trans/trans diphosphorus heterocycles 11a-c. The major isomer could be crystallized and isolated free of the other diastereomers. Reaction of 6 with EtPCl(2) gave a 6:1 mixture of cis/trans isomers of the ethyl-substituted heterocycles 12a,b as an inseparable oil but allowed confirmation of the structure of 11a. Slow epimerization at phosphorus may occur by inversion but more likely by ring opening/closure, since 7b, 9a, and 11a give rise upon standing in solution to mixtures containing starting material and 7a, 9b, and 11b, respectively, along with the free amino acid derivatives 4 and 6. The NMR spectra, and in particular the coupling constants between the alpha-hydrogen atom of the amino acid moiety and phosphorus, were used to establish the identities of the cis and trans isomers. Reaction of 9a with (THF)W(CO)(5) gave the phosphorus-ligated adduct (9a)W(CO)(5) (13), and the IR spectrum of this complex shows that 9a is a strongly electron-withdrawing ligand. The geometry of the sulfonamide moiety is discussed in detail, as are the (1)H NMR coupling constants. The data are consistent with the presence of little steric interaction between the cis isopropyl and phosphorus substituent in 9a, 11a, and 12a and orientation of the tolyl moiety s-cis to the isopropyl group in 9b, 12b, and 13.

Synthesis of Tungsten Carbonyl and Nitrosyl Complexes of Monodentate and Chelating Aryl-N-sulfonylphosphoramides, the First Members of a New Class of Electron-Withdrawing Phosphine Ligands. Comparative IR and (13)C and (31)P NMR Study of Related Phosphorus Complexes.

Reaction of N,N'-bis(tolylsulfonyl)-1,2-diaminoethane with PhPCl(2) gives in 62% yield the phosphonous diamide 2-phenyl-1,3-bis(p-tolylsulfonyl)-1,3,2-diazaphospholidine (4, "TosL") and with Ph(2)PCl in 43% yield the diphosphinous amide N,N'-bis(diphenylphosphino)-N,N'-bis(p-tolylsulfonyl)-1,2-ethanediamine (5, "diTosL"). Reaction of 4 with (THF)W(CO)(5) gives (TosL)W(CO)(5) (6) in 77% yield, and reaction of 5 with trans-BrW(CO)(4)NO gives cis, cis, trans-(diTosL)W(CO)(2)(NO)Br (8) in 86% yield. The IR, (13)C NMR, and (31)P NMR spectra of 4, 5, 6, and 8 are compared to those of a variety of compounds including LW(CO)(5) (L = PMe(3), PPh(3), PPh(NEt(2))(2), P(OMe)(3), P(CF(3))(3)), L(2)W(CO)(2)(NO)Br (L(2) = Ar(2)PCH(2)CH(2)PAr(2) (Ar = Ph (diphos), C(6)F(5) (diphos-F(20))), (CH(3)CN)(2)), and the free ligands as appropriate. The IR data are interpreted to suggest a relative ordering of ligand acceptor ability of P(CF(3))(3) > 4 approximately P(OMe)(3) > PPh(3) approximately PPh(NEt(2))(2) and a relative ordering of ligand donor ability of PPh(NEt(2))(2) >/= P(OMe)(3) > PPh(3) > 4 > P(CF(3))(3). The chelating ligand diTosL is about as electron-withdrawing as diphos-F(20), on the basis of the IR data. The (31)P NMR data qualitatively support the conclusion that TosL and diTosL are highly electron-withdrawing ligands, on the basis of (1)J(PW). The (13)C data do not permit any such generalizations, although the spectra of the diphosphine ligands and adducts are of interest due to the observation of "virtual coupling" that surprisingly can be simulated only as ABX rather than AA'X spin-systems.