Modelling air pollution around nuclear power plants: validation of dispersion models using tracer data.

The Sostanj exercise of the Modelling and Data for Radiological Impact Assessments I Urban Environments Working Group took advantage of a set of measurement data from a 1991 tracer experiment to test atmospheric dispersion models for emissions from point sources over complex terrain. The data set included emissions of SO2from the stacks of the Sostanj Thermal Power Plant in Slovenia, measurements of the SO2at a number of locations in the surrounding area up to 7 km from the plant, and meteorological data from several monitoring stations, all as measured half-hour average values. Two sets of meteorological conditions were modelled: (a) a simple situation with a strong wind blowing from a point source directly towards a monitoring station; and (b) a complex situation involving a temperature inversion and convective mixing. The modelling results enable the assessment of the capabilities of various dispersion models in handling both complex terrain and complex meteorological situations.

Urban working groups in the IAEA's model testing programmes: overview from the MODARIA I and MODARIA II programmes.

The IAEA's model testing programmes have included a series of Working Groups concerned with modelling radioactive contamination in urban environments. These have included the Urban Working Group of Validation of Environmental Model Predictions (1988-1994), the Urban Remediation Working Group of Environmental Modelling for Radiation Safety (EMRAS) (2003-2007), the Urban Areas Working Group of EMRAS II (2009-2011), the Urban Environments Working Group of (Modelling and Data for Radiological Impact Assessments) MODARIA I (2013-2015), and most recently, the Urban Exposures Working Group of MODARIA II (2016-2019). The overarching objective of these Working Groups has been to test and improve the capabilities of computer models used to assess radioactive contamination in urban environments, including dispersion and deposition processes, short-term and long-term redistribution of contaminants following deposition events, and the effectiveness of various countermeasures and other protective actions, including remedial actions, in reducing contamination levels, human exposures, and doses to humans. This paper describes the exercises conducted during the MODARIA I and MODARIA II programmes. These exercises have included short-range and mid-range atmospheric dispersion exercises based on data from field tests or tracer studies, hypothetical urban dispersion exercises, and an exercise based on data collected after the Fukushima Daiichi accident. Improvement of model capabilities will lead to improvements in assessing various contamination scenarios (real or hypothetical), and in turn, to improved decision-making and communication with the public following a nuclear or radiological emergency.

The MARS2013 Mars analog mission.

We report on the MARS2013 mission, a 4-week Mars analog field test in the northern Sahara. Nineteen experiments were conducted by a field crew in Morocco under simulated martian surface exploration conditions, supervised by a Mission Support Center in Innsbruck, Austria. A Remote Science Support team analyzed field data in near real time, providing planning input for the management of a complex system of field assets; two advanced space suit simulators, four robotic vehicles, an emergency shelter, and a stationary sensor platform in a realistic work flow were coordinated by a Flight Control Team. A dedicated flight planning group, external control centers for rover tele-operations, and a biomedical monitoring team supported the field operations. A 10 min satellite communication delay and other limitations pertinent to human planetary surface activities were introduced. The fields of research for the experiments were geology, human factors, astrobiology, robotics, tele-science, exploration, and operations research. This paper provides an overview of the geological context and environmental conditions of the test site and the mission architecture, in particular the communication infrastructure emulating the signal travel time between Earth and Mars. We report on the operational work flows and the experiments conducted, including a deployable shelter prototype for multiple-day extravehicular activities and contingency situations.

Field trial of a dual-wavelength fluorescent emission (L.I.F.E.) instrument and the Magma White rover during the MARS2013 Mars analog mission.

Abstract We have developed a portable dual-wavelength laser fluorescence spectrometer as part of a multi-instrument optical probe to characterize mineral, organic, and microbial species in extreme environments. Operating at 405 and 532 nm, the instrument was originally designed for use by human explorers to produce a laser-induced fluorescence emission (L.I.F.E.) spectral database of the mineral and organic molecules found in the microbial communities of Earth's cryosphere. Recently, our team had the opportunity to explore the strengths and limitations of the instrument when it was deployed on a remote-controlled Mars analog rover. In February 2013, the instrument was deployed on board the Magma White rover platform during the MARS2013 Mars analog field mission in the Kess Kess formation near Erfoud, Morocco. During these tests, we followed tele-science work flows pertinent to Mars surface missions in a simulated spaceflight environment. We report on the L.I.F.E. instrument setup, data processing, and performance during field trials. A pilot postmission laboratory analysis determined that rock samples acquired during the field mission exhibited a fluorescence signal from the Sun-exposed side characteristic of chlorophyll a following excitation at 405 nm. A weak fluorescence response to excitation at 532 nm may have originated from another microbial photosynthetic pigment, phycoerythrin, but final assignment awaits development of a comprehensive database of mineral and organic fluorescence spectra. No chlorophyll fluorescence signal was detected from the shaded underside of the samples.

A case for using ground-based thermal inertia measurements to detect Martian caves.

Martian caves are regarded as one of the most interesting locations in which to search for life on the planet. Data obtained during the MARS2013 expedition at Hamar Laghdad Ridge in the Tafilalt region of Morocco indicate that even small cavities can display thermal behavior that is characteristic for caves. For example, temperature in a cavity equaled 14°C±0.1°C before sunrise, which was higher than the temperature of the ambient air (10°C±0.1°C) and proximate rocks (9°C±0.1°C) at the same time. Within 30 min after sunrise, when the temperature of surrounding rocks corresponded to 15°C, this thermal relationship reversed. Measurements were conducted under simulated spaceflight conditions, including near-real-time interpretation of data that were acquired in a complex flight planning environment. We conclude that using ground-based thermal contrast measurements, in 7-14 µm band before and after sunset, is an effective method for Mars astronauts to identify caves, possibly superior to usage of space-based or ground-penetrating data.

Remote science support during MARS2013: testing a map-based system of data processing and utilization for future long-duration planetary missions.

MARS2013 was an integrated Mars analog field simulation in eastern Morocco performed by the Austrian Space Forum between February 1 and 28, 2013. The purpose of this paper is to discuss the system of data processing and utilization adopted by the Remote Science Support (RSS) team during this mission. The RSS team procedures were designed to optimize operational efficiency of the Flightplan, field crew, and RSS teams during a long-term analog mission with an introduced 10 min time delay in communication between "Mars" and Earth. The RSS workflow was centered on a single-file, easy-to-use, spatially referenced database that included all the basic information about the conditions at the site of study, as well as all previous and planned activities. This database was prepared in Google Earth software. The lessons learned from MARS2013 RSS team operations are as follows: (1) using a spatially referenced database is an efficient way of data processing and data utilization in a long-term analog mission with a large amount of data to be handled, (2) mission planning based on iterations can be efficiently supported by preparing suitability maps, (3) the process of designing cartographical products should start early in the planning stages of a mission and involve representatives of all teams, (4) all team members should be trained in usage of cartographical products, (5) technical problems (e.g., usage of a geological map while wearing a space suit) should be taken into account when planning a work flow for geological exploration, (6) a system that helps the astronauts to efficiently orient themselves in the field should be designed as part of future analog studies.