Visualization of latent fingerprints using fluorescence lifetime imaging on paper emitting strong fluorescence.

Latent fingerprints were successfully visualized using fluorescence lifetime imaging (FLIM) on paper which emits strong fluorescence with a lifetime close to that of fingerprints and thus from which it is difficult for time-resolved spectroscopy to visualize fingerprints. Latent fingerprint samples on paper were excited using a 450 nm or 532 nm nanosecond pulsed-laser, and time-resolved fluorescence images were obtained at a delay time of 6-16 ns in intervals of 1 ns, to the excitation pulse. The excitation beam was expanded using a lens, and the fluorescence from the fingerprints was captured using an intensified CCD camera. Because of the large fluorescence intensity of the background paper of approximately two to four orders of magnitude larger than that of the fingerprint, the fingerprint was not visualized on each fluorescence image by time-resolved spectroscopy. However, the fingerprint was visualized in a FLIM image constructed using a series of the fluorescence images for the case with the fluorescence intensity of the background paper being four orders of magnitude larger than that of the fingerprint. The difference in fluorescence lifetime in the FLIM image of the visualized fingerprint and background paper was in the order of 0.1 ns, which was an order of magnitude smaller than the inherent fluorescence lifetime of a few nanoseconds for the fingerprints and paper. It was demonstrated that, at a background fluorescence intensity with a certain order of magnitude larger than that of fingerprints, FLIM has the potential to visualize latent fingerprints which cannot be visualized by time-resolved spectroscopy.

Application of mist to fingermark detection: Misting with high-boiling-point liquid containing p-dimethylaminocinnamaldehyde and cyanoacrylate.

In order to detect latent fingerprints that could be damaged by liquid or powder reagents, non-destructive processes such as gaseous reagents have been developed. In this report, we propose the use of fine mist generated when hot vapor of high-boiling-point liquids is rapidly cooled by surrounding air for fingermark detection. Octyl acetate (OA), 2-phenoxyethanol (2PE), and methyl decanoate (MD) were found to efficiently produce mist when heated to 230°C. By combining these liquids with p-dimethylaminocinnamaldehyde (DMAC) and cyanoacrylate (CN), our team demonstrated effective fluorescence staining of cyano-treated fingermarks using DMAC/OA misting or DMAC/2PE misting, and one-step fluorescence detection of latent fingermarks without cyanoacrylate treatment using DMAC/OA/CN misting or DMAC/MD/CN misting. Fingermark fluorescence was efficiently observed by excitation with a blue LED light (max. wavelength 470 nm) equipped with an interference filter and passing through a 520 nm long-pass filter. We successfully obtained fluorescent images from fingermarks on several substrate materials using the developed misting method.

Independent component analysis of hyperspectral data measured from overlapping latent fingermarks: Forensic potential of independent component images.

Overlapping fingermark images are sometimes discarded because fingermark collation for the individual fingermarks is difficult. Fluorescence hyperspectral data (HSD) measured using the models of double overlapping fingermarks obtained under the excitation of a high-power, continuous wave, green laser is suitable for obtaining individual fingermark images. However, there are limitations such as the problems on each spectrum of the individual fingermark and the forensic value of the obtained images. In this study, independent component analysis (ICA) was applied to the fluorescence HSD obtained from the models of doubly overlapping fingermarks, to obtain independent component (IC) spectra and the corresponding IC images. Forensic value of the obtained IC images was examined, considering the possibility of fingermark collation in masked fashion to the model sample information. The IC images obtained from the HSD had enough potential to enable extracting twelve minutiae required for fingermark collation if the image quality was good.

Separation of overlapping fingerprints by principal component analysis and multivariate curve resolution-alternating least squares analysis of hyperspectral imaging data.

Overlapping fingerprints are often found at crime scenes, but only individual fingerprints separated from each other are admissible as evidence in court. Fingerprint components differ slightly among individuals, and thus their fluorescence spectra also differ from each other. Therefore, the separation of overlapping fingerprints using the difference of the fluorescence spectrum was performed with a hyperspectral imager. Hyperspectral data (HSD) of overlapping fingerprints were recorded under UV LED excitation. Principal component analysis (PCA) and multivariate curve resolution-alternating least squares (MCR-ALS) were applied to the HSD to determine the optimal method for obtaining high-contrast images of individual fingerprints. The results suggested that MCR-ALS combined with PCA-based initialization is capable of separating overlapping fingerprints into individual fingerprints. In this study, a method for separating overlapping fingerprints without initial parameters was proposed.

Analysis of water-soluble paper for forensic discrimination.

Water-soluble paper (WSP), which easily dissolves in water, has been found in criminal gang hideouts as evidence in crimes including bank transfer fraud, phone fraud, and grandparent scams, i.e. identity fraud to steal money. Distinguishing WSP products used in crimes is required in forensic investigations to link fraud groups with paper evidence or prove connections among fraud groups. In this work, we investigate distinguishing WSP products. White sheets of six WSP products available in Japan were analyzed by measuring the grammage and thickness, determining additive compounds by X-ray diffraction (XRD), X-ray fluorescence (XRF), and scanning electron microscopy (SEM)/energy dispersive X-ray spectrometry (EDX), and performing fiber analysis by transmitted light microscopy. The six products were categorized into three groups by grammage and thickness. XRD, XRF, and SEM/EDX analysis provided elemental information about additive compounds and their distribution on the surface. Pulp analysis by Graff "C" stain provided the composition and morphology of the pulp. The six products could be distinguished in a similar way to plain paper by these analyses. Our results demonstrate that conventional analytical methods used for plain paper analysis can also be used to discriminate WSP in forensic investigations.