Low-temperature redox activity and alcohol ammoxidation performance on Cu- and Ru-incorporated ceria catalysts.

Transition-metal-incorporated cerium oxides with Cu and a small amount of Ru (Cu0.18Ru0.05CeOz) were prepared, and their low-temperature redox performance (<423 K) and catalytic alcohol ammoxidation performance were investigated. Temperature-programmed reduction/oxidation under H2/O2 and in situ X-ray absorption fine structure revealed the reversible redox behavior of the three metals, Cu, Ru, and Ce, in the low-temperature redox processes. The initially reduced Ru species decreased the reduction temperature of Cu oxides and promoted the activation of Ce species. Cu0.18Ru0.05CeOz selectively catalyzed the production of benzonitrile in the ammoxidation of benzyl alcohol. H2-treated Cu0.18Ru0.05CeOz showed a slightly larger initial conversion of benzyl alcohol than O2-treated Cu0.18Ru0.05CeOz, suggesting that the reduced structure of Cu0.18Ru0.05CeOz was active for the ammoxidation. The integration of both Cu and Ru resulted in the efficient promotion of ammoxidation, in which the Ru species were involved in the conversion of benzyl alcohol and Cu species were required for selective production of benzonitrile.

Effect of electron beam irradiation in gas atmosphere during ETEM.

Transmission electron microscopy (TEM) is used to observe the atomic structures of materials. Environmental TEM (ETEM) is a method wherein a gas can be evaluated and it has been used to observe the dynamic reaction between materials and gases at the atomic level. An electron beam (EB), which has a sufficiently high energy (exceeding a few tens of kilovolts), can be used to ionize gas molecules. Subsequently, the ionized molecules might react with the materials during ETEM. Therefore, the current generated by the ions and electrons were measured to verify the presence of ions generated due to the ionization of the N2 gas atmosphere during EB irradiation in ETEM. The electron energy loss spectra (EELS) were acquired from the N2 gas atmosphere to estimate the types of ions generated. The results demonstrated that ions and electrons were generated in the N2 atmosphere during ETEM and EB irradiation. Moreover, the EELS analysis indicated that the generated ion was N2+. The material observation conducted using gas ETEM can detect the reaction between gases, ions, and materials.

Quantum de-trapping and transport of heavy defects in tungsten.

The diffusion of defects in crystalline materials1 controls macroscopic behaviour of a wide range of processes, including alloying, precipitation, phase transformation and creep2. In real materials, intrinsic defects are unavoidably bound to static trapping centres such as impurity atoms, meaning that their diffusion is dominated by de-trapping processes. It is generally believed that de-trapping occurs only by thermal activation. Here, we report the direct observation of the quantum de-trapping of defects below around one-third of the Debye temperature. We successfully monitored the de-trapping and migration of self-interstitial atom clusters, strongly trapped by impurity atoms in tungsten, by triggering de-trapping out of equilibrium at cryogenic temperatures, using high-energy electron irradiation and in situ transmission electron microscopy. The quantum-assisted de-trapping leads to low-temperature diffusion rates orders of magnitude higher than a naive classical estimate suggests. Our analysis shows that this phenomenon is generic to any crystalline material.

Topologically immobilized catalysis centre for long-term stable carbon dioxide reforming of methane.

Methane reforming at low temperatures is of growing importance to mitigate the environmental impact of the production of synthesis gas, but it suffers from short catalyst lifetimes due to the severe deposition of carbon byproducts. Herein, we introduce a new class of topology-tailored catalyst in which tens-of-nanometer-thick fibrous networks of Ni metal and oxygen-deficient Y2O3 are entangled with each other to form a rooted structure, i.e., Ni#Y2O3. We demonstrate that the rooted Ni#Y2O3 catalyst stably promotes the carbon-dioxide reforming of methane at 723 K for over 1000 h, where the performance of traditional supported catalysts such as Ni/Y2O3 diminishes within 100 h due to the precluded mass transport by accumulated carbon byproducts. In situ TEM demonstrates that the supported Ni nanoparticles are readily detached from the support surface in the reaction atmosphere, and migrate around to result in widespread accumulation of the carbon byproducts. The long-term stable methane reforming over the rooted catalyst is ultimately attributed to the topologically immobilized Ni catalysis centre and the synergistic function of the oxygen-deficient Y2O3 matrix, which successfully inhibits the accumulation of byproducts.

Nanoporous Nickel Composite Catalyst for the Dry Reforming of Methane.

The development of efficient catalysts with high activities and durabilities for use in the dry reforming of methane (DRM) is desirable but challenging. We report the development of a nanoporous nickel composite (nanoporous Ni/Y2O3) via a facile one-step dealloying technique, for use in the DRM. Focusing on the low-temperature DRM, our composite possessed remarkable activity and durability against coking compared with conventional particle-based Ni catalysts. This was attributed to the aluminum oxides present on the Ni surface, which suppress pore coarsening. In addition, the inert bundled Y2O3 nanowires are suitable for use as substrates for nanoporous Ni.

Robust Binding between Carbon Nitride Nanosheets and a Binuclear Ruthenium(II) Complex Enabling Durable, Selective CO2 Reduction under Visible Light in Aqueous Solution.

Carbon nitride nanosheets (NS-C3 N4 ) were found to undergo robust binding with a binuclear ruthenium(II) complex (RuRu') even in basic aqueous solution. A hybrid material consisting of NS-C3 N4 (further modified with nanoparticulate Ag) and RuRu' promoted the photocatalytic reduction of CO2 to formate in aqueous media, in conjunction with high selectivity (approximately 98 %) and a good turnover number (>2000 with respect to the loaded Ru complex). These represent the highest values yet reported for a powder-based photocatalytic system during CO2 reduction under visible light in an aqueous environment. We also assessed the desorption of RuRu' from the Ag/C3 N4 surface, a factor that can contribute to a loss of activity. It was determined that desorption is not induced by salt additives, pH changes, or photoirradiation, which partly explains the high photocatalytic performance of this material.

High-voltage electron microscopy tomography and structome analysis of unique spiral bacteria from the deep sea.

Structome analysis is a useful tool for identification of unknown microorganisms that cannot be cultured. In 2012, we discovered a unique deep-sea microorganism with a cell structure intermediate between those of prokaryotes and eukaryotes and described its features using freeze-substitution electron microscopy and structome analysis (quantitative and three-dimensional structural analysis of a whole cell at the electron microscopic level). We named it Myojin parakaryote Here we describe, using serial ultrathin sectioning and high-voltage electron microscopy tomography of freeze-substituted specimens, the structome analysis and 3D reconstruction of another unique spiral bacteria, found in the deep sea off the coast of Japan. The bacteria, which is named as 'Myojin spiral bacteria' after the discovery location and their morphology, had a total length of 1.768 ± 0.478 µm and a total diameter of 0.445 ± 0.050 µm, and showed either clockwise or counter-clockwise spiral. The cells had a cell surface membrane, thick fibrous layer, ribosomes and inner fibrous structures (most likely DNA). They had no flagella. The bacteria had 322 ± 119 ribosomes per cell. This ribosome number is only 1.2% of that of Escherichia coli and 19.3% of Mycobacterium tuberculosis and may reflect a very slow growth rate of this organism in the deep sea.

Sub-nm 3D observation of human hair melanin by high-voltage STEM.

The ultrastructure of melanin granules in human hair was studied using 1,000 kV high-voltage scanning transmission electron microscopy to successfully reconstruct three-dimensional images of the whole melanin granule. It was revealed that the melanin granule was composed of a membrane-like outer structure that included many spherical vesicles, and an inner matrix containing a sheet-like structure in the elongated direction of the melanin granule and a sheet-like arrays structure in the cross direction. The outer structure of the melanin granule was maintained even after exposure to hair-bleaching agents to decompose the melanin granule, suggesting that the outer structure was a highly robust structure and composition compared with the inner matrix .

Direct observation of catalytic oxidation of particulate matter using in situ TEM.

The ability to observe chemical reactions at the molecular level convincingly demonstrates the physical and chemical phenomena occurring throughout a reaction mechanism. Videos obtained through in situ transmission electron microscopy (TEM) revealed the oxidation of catalytic soot under practical reaction conditions. Carbon oxidation reactions using Ag/SiO2 or Cs2CO3/nepheline catalysts were performed at 330 °C under an O2 flow of 0.5 Pa in the TEM measurement chamber. Ag/SiO2 catalyzed the reaction at the interface of the mobile Ag species and carbon, while the Cs species was fixed on the nepheline surface during the reaction. In the latter case, carbon particles moved, remained attached to the Cs2CO3/nepheline surface, and were consumed at the interface by the oxidation reaction. Using this technique, we were able to visualize such mobile and immobile catalysis according to different mechanisms.

Reversible redox processes of poly(anilines) in layered semiconductor niobate films under alternate UV-vis light illumination.

The synthesis of polyaniline (PANI) with semiconducting layered niobate (NbO) to form PANI/NbO hybrid materials and their reversible color change under a unique redox process under the influence of UV and/or visible light have been investigated. The in-situ polymerization of anilinium chlorides (ANI) packed in a regular orientation in a bilayer structure within the NbO interlayers led to PANI/NbO hybrid powders by heat treatment using (NH(4))(2)S(2)O(8) as the catalyst. The resulting PANI of these hybrids showed the characteristics of a fully oxidized quinoid form, i.e., pernigranine (PG). The PANI/NbO suspension in H(2)O was cast on a glass substrate to form a PANI/NbO film after evaporation of the water with a good parallel orientation of the NbO layers against the glass substrate. Upon UV light irradiation in the presence of a reductant such as MeOH, the violet-colored PANI (PG) polymers within the NbO interlayers were reduced by the NbO-induced photocatalytic reactions and led to a colorless PANI, i.e., leucoemeraldine (LE). Moreover, the resulting colorless PANI/NbO films reverted back to a blue-colored PANI, i.e., emeraldine (EM), due to oxidation by the surrounding O(2) gas. The PANI/NbO hybrid films were able to retain repetitive and reversible photoinduced patterning for over 50 cycles under such alternate UV and visible light irradiation.