Metal-Organic Frameworks (MOFs) As Hydrogen Storage Materials At Near-Ambient Temperature.

Hydrogen may play a critical role in our efforts to de-carbonize by 2050. However, there remain technical challenges in the storage and transport of hydrogen. Metal-organic frameworks (MOFs) have shown significant promise for hydrogen storage at cryogenic temperatures. A material that can meet the US department of energy (DOE) ultimate goal of 6.5 wt. % for gravimetric performance and 50 g/L for volumetric storage at near-ambient temperatures would unlock hydrogen as a future fuel source for on-board applications. Metal-organic frameworks typically have low heat of adsorptions (i. e. 4-7 kJ/mol), whereas for storing significant quantities of hydrogen at near-ambient temperatures, 15-25 kJ/mol is likely required. In this review we explore the current methods used (i. e., open-metal sites, alkali dopants and hydrogen spillover) for promoting strong adsorption within MOFs. Further we discuss MOF-based materials with respect to the technical aspects of deliverable capacity, kinetics and stability.

A Homochiral Porous Organic Cage-Polymer Membrane for Enantioselective Resolution.

Membrane-based enantioselective separation is a promising method for chiral resolution due to its low cost and high efficiency. However, scalable fabrication of chiral separation membranes displaying both high enantioselectivity and high flux of enantiomers is still a challenge. Here, the authors report the preparation of homochiral porous organic cage (Covalent cage 3 (CC3)-R)-based enantioselective thin-film-composite membranes using polyamide (PA) as the matrix, where fully organic and solvent-processable cage crystals have good compatibility with the polymer scaffold. The hierarchical CC3-R channels consist of chiral selective windows and inner cavities, leading to favorable chiral resolution and permeation of enantiomers; the CC3-R/PA composite membranes display an enantiomeric excess of 95.2% for R-(+)-limonene over S-(-)-limonene and a high flux of 99.9 mg h-1 m-2. This work sheds light on the use of homochiral porous organic cages for preparing enantioselective membranes and demonstrates a new route for the development of next-generation chiral separation membranes.

Synthesizing Hypercrosslinked Polymers with Deep Eutectic Solvents to Enhance CO2/N2 Selectivity.

Hypercrosslinked polymers (HCPs) are widely used in ion exchange, water purification, and gas separation. However, HCP synthesis typically requires hazardous halogenated solvents e. g., dichloroethane, dichloromethane and chloroform which are toxic to human health and environment. Herein we hypothesize that the use of halogenated solvents in HCP synthesis can be overcome with deep eutectic solvents (DES) comprising metal halides-FeCl3, ZnCl2 that can act as both the solvent hydrogen bond donor and catalyst for polymer crosslinking via Friedel Crafts alkylation. We validated our hypothesis by synthesizing HCPs in DESs via internal and external crosslinking strategies. [ChCl][ZnCl2]2 and [ChCl][FeCl3]2 was more suitable for internal and external hypercrosslinking, respectively. The specific surface areas of HCPs synthesized in DES were 20-60 % lower than those from halogenated solvents, but their CO2/N2 selectivities were up to 453 % higher (CO2/N2 selectivity of poly-α,α'-dichloro-p-xylene synthesized in [ChCl][ZnCl2]2 via internal crosslinking reached a value of 105). This was attributed to the narrower pore size distributions of HCPs synthesized in DESs.

New Class of High-Energy, High-Power Capacitive Devices Enabled by Stabilized Lithium Metal Anodes.

Lithium-ion capacitors (LIC) combine the energy storage mechanisms of lithium-ion batteries and electric double layer capacitors (EDLC) and are supposed to promise the best of both worlds: high energy and power density combined with a long life. However, the lack of lithium cation sources in the carbon cathode demands the cumbersome step of prelithiation of the graphite anode, mainly by using sacrificial lithium metal, hindering the mass adoption of LICs. Here, in a conceptually new class of devices termed lithium metal capacitors (LMC), we replace the graphite anode with a lithium metal anode stabilized by a complex yet stable solid-electrolyte interface (SEI). Via a specialized formation process, the well-explored synergetic reaction between the LiNO3 additive and controlled amounts of polysulfides in an ether-based electrolyte stabilizes the SEI on the lithium metal electrode. Optimized devices at the coin cell level deliver 55 mAh g-1 at a fast 30C discharge rate and maintain 95% capacity after 8000 cycles. At the pouch-cell level, energy densities of 13 Wh kg-1 are readily achieved, indicating the transferability of the technology to practical scales. The LMC, a new class of capacitive device, eliminates the prelithiation process of the conventional LIC, allowing practical production at scale and offering exciting avenues for exploring versatile cathode chemistries on account of using a lithium metal anode.

Pyro-layered heterostructured nanosheet membrane for hydrogen separation.

Engineering different two-dimensional materials into heterostructured membranes with unique physiochemical properties and molecular sieving channels offers an effective way to design membranes for fast and selective gas molecule transport. Here we develop a simple and versatile pyro-layering approach to fabricate heterostructured membranes from boron nitride nanosheets as the main scaffold and graphene nanosheets derived from a chitosan precursor as the filler. The rearrangement of the graphene nanosheets adjoining the boron nitride nanosheets during the pyro-layering treatment forms precise in-plane slit-like nanochannels and a plane-to-plane spacing of ~3.0 Å, thereby endowing specific gas transport pathways for selective hydrogen transport. The heterostructured membrane shows a high H2 permeability of 849 Barrer, with a H2/CO2 selectivity of 290. This facile and scalable technique holds great promise for the fabrication of heterostructures as next-generation membranes for enhancing the efficiency of gas separation and purification processes.

A Homochiral Poly(2-oxazoline)-based Membrane for Efficient Enantioselective Separation.

Chiral separation membranes have shown great potential for the efficient separation of racemic mixtures into enantiopure components for many applications, such as in the food and pharmaceutical industries; however, scalable fabrication of membranes with both high enantioselectivity and flux remains a challenge. Herein, enantiopure S-poly(2,4-dimethyl-2-oxazoline) (S-PdMeOx) macromonomers were synthesized and used to prepare a new type of enantioselective membrane consisting of a chiral S-PdMeOx network scaffolded by graphene oxide (GO) nanosheets. The S-PdMeOx-based membrane showed a near-quantitative enantiomeric excess (ee) (98.3±1.7 %) of S-(-)-limonene over R-(+)-limonene and a flux of 0.32 mmol m-2 h-1 . This work demonstrates the potential of homochiral poly(2,4-disubstituted-2-oxazoline)s in chiral discrimination and provides a new route to the development of highly efficient enantioselective membranes using synthetic homochiral polymer networks.

Capture, Storage, and Release of Oxygen by Metal-Organic Frameworks (MOFs).

Oxygen is a critical gas for medical and industrial settings. Much of today's global oxygen supply is via inefficient technologies such as cryogenic distillation, membranes or zeolites. Metal-organic frameworks (MOFs) promise a superior alternative for oxygen separation, as their fundamental chemistry can in principle be tailored for reversible and selective oxygen capture. We evaluate the characteristics for reversible and selective uptake of oxygen by MOFs, focussing on redox-active sites. Key characteristics for separation can also be seen in MOFs for oxygen storage roles. Engineering solutions to release adsorbed oxygen from the MOFs are discussed including Temperature Swing Adsorption (TSA), Pressure Swing Adsorption (PSA) and the highly efficient Magnetic Induction Swing Adsorption (MISA). We conclude with the applications and outlooks for oxygen capture, storage and release, and the likely impacts the next generation of MOFs will have on industry and the broader community.

Underlying Polar and Nonpolar Modification MOF-Based Factors that Influence Permanent Porosity in Porous Liquids.

It is increasingly apparent that porous liquids (PLs) have unique use cases due to the combination of ready liquid handling and their inherently high adsorption capacity. Among the PL types, those with permanent porosity are the most promising. Although Type II and III PLs have economic synthetic methods and can be made from a huge variety of metal-organic frameworks (MOFs) and solvents, these nanocomposites still need to be stable to be useful. This work aims to systematically explore the possibilities of creating PLs using different MOF modification methods. This delivered underpinning insights into the molecular-level influence between solvent and MOF on the overall nanocomposite stability. Zirconium-based metal-organic frameworks were combined with two different solvents of varying chemistry to deliver CO2 sorption capacities as high as 2.9 mmol g-1 at 10 bar. The results of the study could have far-reaching ramifications for future investigations in the PL field.

Practical considerations in the design and use of porous liquids.

The possibility of creating well-controlled empty space within liquids is conceptually intriguing, and from an application perspective, full of potential. Since the concept of porous liquids (PLs) arose several years ago, research efforts in this field have intensified. This review highlights the design, synthesis, and applicability of PLs through a thorough examination of the current state-of-the-art. Following a detailed examination of the fundamentals of PLs, we examine the different synthetic approaches proposed to date, discuss the nature of PLs, and their pathway from the laboratory to practical application. Finally, possible challenges and opportunities are outlined.

In Situ Investigation of Multicomponent MOF Crystallization during Rapid Continuous Flow Synthesis.

Access to the potential applications of metal-organic frameworks (MOFs) depends on rapid fabrication. While there have been advances in the large-scale production of single-component MOFs, rapid synthesis of multicomponent MOFs presents greater challenges. Multicomponent systems subjected to rapid synthesis conditions have the opportunity to form separate kinetic phases that are each built up using just one linker. We sought to investigate whether continuous flow chemistry could be adapted to the rapid formation of multicomponent MOFs, exploring the UMCM-1 and MUF-77 series. Surprisingly, phase pure, highly crystalline multicomponent materials emerge under these conditions. To explore this, in situ WAXS was undertaken to gain an understanding of the formation mechanisms at play during flow synthesis. Key differences were found between the ternary UMCM-1 and the quaternary MUF-7, and key details about how the MOFs form were then uncovered. Counterintuitively, despite consisting of just two ligands UMCM-1 proceeds via MOF-5, whereas MUF-7 consists of three ligands but is generated directly from the reaction mixture. By taking advantage of the scalable high-quality materials produced, C6 separations were achieved in breakthrough settings.

A saccharide-based binder for efficient polysulfide regulations in Li-S batteries.

The viability of lithium-sulfur batteries as an energy storage technology depends on unlocking long-term cycle stability. Most instability stems from the release and transport of polysulfides from the cathode, which causes mossy growth on the lithium anode, leading to continuous consumption of electrolyte. Therefore, development of a durable cathode with minimal polysulfide escape is critical. Here, we present a saccharide-based binder system that has a capacity for the regulation of polysulfides due to its reducing properties. Furthermore, the binder promotes the formation of viscoelastic filaments during casting which endows the sulfur cathode with a desirable web-like microstructure. Taken together this leads to 97% sulfur utilisation with a cycle life of 1000 cycles (9 months) and capacity retention (around 700 mAh g-1 after 1000 cycles). A pouch cell prototype with a specific energy of up to 206 Wh kg-1 is produced, demonstrating the promising potential for practical applications.

Solvent-induced enantioselectivity reversal in a chiral metal organic framework.

Solvent-induced enantioselectivity reversal is a rarely reported phenomenon in porous homochiral materials. Similar behavior has been studied in chiral high performance liquid chromatography, where minor modifications to the mobile phase can induce elution order reversal of two enantiomers on a chiral stationary phase column. We report the first instance of solvent-induced enantioselectivity reversal in a homochiral metal organic framework. Further, we highlight the complex enantioselectivity behavior of homochiral metal organic frameworks toward racemic mixtures in the presence of solvents through racemate-solvent enantioselectivity and loading experiments as well as enantiopure-solvent loading experiments. We hypothesize that this interesting selectivity reversal behavior is likely to be observed in other competitive adsorption, nonchiral selective processes involving a solvent.

Highly-Efficient Sulfonated UiO-66(Zr) Optical Fiber for Rapid Detection of Trace Levels of Pb2.

Lead detection for biological environments, aqueous resources, and medicinal compounds, rely mainly on either utilizing bulky lab equipment such as ICP-OES or ready-made sensors, which are based on colorimetry with some limitations including selectivity and low interference. Remote, rapid and efficient detection of heavy metals in aqueous solutions at ppm and sub-ppm levels have faced significant challenges that requires novel compounds with such ability. Here, a UiO-66(Zr) metal-organic framework (MOF) functionalized with SO3H group (SO3H-UiO-66(Zr)) is deposited on the end-face of an optical fiber to detect lead cations (Pb2+) in water at 25.2, 43.5 and 64.0 ppm levels. The SO3H-UiO-66(Zr) system provides a Fabry-Perot sensor by which the lead ions are detected rapidly (milliseconds) at 25.2 ppm aqueous solution reflecting in the wavelength shifts in interference spectrum. The proposed removal mechanism is based on the adsorption of [Pb(OH2)6]2+ in water on SO3H-UiO-66(Zr) due to a strong affinity between functionalized MOF and lead. This is the first work that advances a multi-purpose optical fiber-coated functional MOF as an on-site remote chemical sensor for rapid detection of lead cations at extremely low concentrations in an aqueous system.

Mixed donor, phenanthroline photoactive MOFs with favourable CO2 selectivity.

Mixed donor phenanthroline-carboxylate linkers were combined with MnII or ZnII to form photoactive MOFs with large pore apertures. The MOFs display high CO2 adsorption capacities, which consequently causes structural framework flexibility, and align with favorable metrics for selective CO2 capture. The photophysical properties of the MOFs were investigated, with the MnII MOF giving rise to short triplet LMCT lifetimes.

Tailoring molecular interactions between microporous polymers in high performance mixed matrix membranes for gas separations.

Membranes are crucial to lowering the huge energy costs of chemical separations. Whilst some promising polymers demonstrate excellent transport properties, problems of plasticisation and physical aging due to mobile polymer chains, amongst others, prevent their exploitation in membranes for industrial separations. Here we reveal that molecular interactions between a polymer of intrinsic microporosity (PIM) matrix and a porous aromatic framework additive (PAF-1) can simultaneously address plasticisation and physical aging whilst also increasing gas transport selectivity. Extensive spectroscopic characterisation and control experiments involving two near-identical PIMs, one with methyl groups (PIM-EA(Me2)-TB) and one without (PIM-EA(H2)-TB), directly confirm the key molecular interaction as the adsoprtion of methyl groups from the PIM matrix into the nanopores of the PAF. This interaction reduced physical aging by 50%, suppressed polymer chain mobilities at high pressure and increased H2 selectivity over larger gases such as CH4 and N2.

Control of Physical Aging in Super-Glassy Polymer Mixed Matrix Membranes.

ConspectusSince the discovery of polymers of intrinsic microporosity (PIMs) in 2004, the fast size-selective interconnected pore cavities of the polymers have caused the upper bound of membrane performance to be revised, twice. Simultaneously, porous materials have meant that mixed matrix membranes (MMMs) are now a relatively simple method of enhancing transport properties. While there are now reliable routes with mixed matrices to improve the fundamental transport properties of membrane materials, many of the other properties crucial for separation applications remain largely unaddressed. Physical aging severely affects membrane performance over time, especially for those prepared from high fractional free volume polymers. Gradual densification of the glassy polymer chains causes the connected pore channels present in these materials to constrict. Studies now suggest that aging of superglassy polymer materials is a two-step process; a rapid densification occurs within the first few days, followed by a gradual rearrangement of packed chains over longer time frames toward a theoretical equilibrium state. Although advantageous in terms of size selectivity, the considerable drop in permeation over the days and weeks after manufacture greatly impacts material applicability. While often still permeating faster than traditional membrane materials, the continuous gradual collapse of cavities in these polymers are a significant challenge in the application of high free volume polymer membranes. In 2014, we discovered that the porous aromatic framework PAF-1 not only greatly improved the membrane's void space and speed of gas transport but also seemingly froze several glassy polymers in a low-density state, holding the polymer's pore channels open, a process termed as Porosity Induced Side chain Adsorption (PISA).This discovery of PISA fundamentally challenged the conventional wisdom at the time that the aging rate could only be addressed by densification of the polymer. Unlike other high-performance glassy polymers, membranes containing PAF-1 can retain their high permeability for more than a year. Several other examples of antiaging behavior have been subsequently reported by the team, where control of aging rate as a function of gas penetrant, selectivity increases, and stability at higher pressures was reported. These works also demonstrate that these mixed matrix systems had applicability for several other separations, including pervaporation, solvent nanofiltration, and as separators for energy applications. In our subsequent studies, the antiaging mechanism has been elucidated as an effect of the interaction between the polymer's accessible pendant methyl group and the aromatic pore surface of PAF-1 or other antiaging additives. In otherwise identical MMMs, where this hypothesized methyl-π interaction is either absent or interrupted, we find that the antiaging behavior expected by the fixation of the polymer chains to the pore surface and PAF-1 does not occur. As a design approach for mixed matrix membranes, targeted interfacial interactions are a promising pathway for developing other stable membranes, enabling the exciting class of PIM materials to improve industrial separation efficiency.

Sulfonated Sub-1-nm Metal-Organic Framework Channels with Ultrahigh Proton Selectivity.

Biological proton channels are sub-1-nm protein pores with ultrahigh proton (H+) selectivity over other ions. Inspired by biological proton channels, developing artificial proton channels with biological-level selectivity is of fundamental significance for separation science. Herein we report synthetic proton channels fabrication based on sulfonated metal-organic frameworks (MOFs), UiO-66-X, X = SAG, NH-SAG, (NH-SAG)2 (SAG: sulfonic acid groups), which have sub-1-nm windows and a high density of sulfonic acid groups mimicking natural proton channels. The ion conductance of UiO-66-X channels follows the sequence: H+ ≫ K+ > Na+> Li+, and the sulfonated UiO-66 derivative channels show proton selectivity much higher than that of the pristine UiO-66 channels. Particularly, the UiO-66-(NH-SAG)2 channels exhibit ultrahigh proton selectivities, H+/Li+ up to ∼100, H+/Na+ of ∼80, and H+/K+ of ∼70, which are ∼3 times of that of UiO-66-NH-SAG channels, and ∼15 times of that of UiO-66@SAG channels. The ultrahigh proton selectivity in the sulfonated sub-1-nm MOF channels is mainly attributed to the narrow window-cavity pore structure functionalized with nanoconfined high-density sulfonic acid groups that facilitate fast proton transport and simultaneously exclude other cations. Our work opens an avenue to develop functional MOF channels for selective ion conduction and efficient ion separation.

Unidirectional and Selective Proton Transport in Artificial Heterostructured Nanochannels with Nano-to-Subnano Confined Water Clusters.

The construction of biological proton channel analogues has attracted substantial interest owing to their wide potential in separation of ions, sensing, and energy conversion. Here, metal-organic framework (MOF)/polymer heterogeneous nanochannels are presented, in which water molecules are confined to disordered clusters in the nanometer-sized polymer regions and to ordered chains with unique molecular configurations in the 1D sub-1-nm porous MOF regions, to realize unidirectional, fast, and selective proton transport properties, analogous to natural proton channels. Given the nano-to-subnano confined water junctions, experimental proton conductivities in the polymer-to-MOF direction of the channels are much higher than those in the opposite direction, showing a high rectification up to 500 and one to two orders of magnitude enhancement compared to the conductivity of proton transport in bulk water. The channels also show a good proton selectivity over other cations. Theoretical simulations further reveal that the preferential and fast proton conduction in the nano-to-subnano channel direction is attributed to extremely low energy barriers for proton transport from disordered to ordered water clusters. This study opens a novel approach to regulate ion permeability and selectivity of artificial ion channels.

Efficient metal ion sieving in rectifying subnanochannels enabled by metal-organic frameworks.

Biological ion channels have remarkable ion selectivity, permeability and rectification properties, but it is challenging to develop artificial analogues. Here, we report a metal-organic framework-based subnanochannel (MOFSNC) with heterogeneous structure and surface chemistry to achieve these properties. The asymmetrically structured MOFSNC can rapidly conduct K+, Na+ and Li+ in the subnanometre-to-nanometre channel direction, with conductivities up to three orders of magnitude higher than those of Ca2+ and Mg2+, equivalent to a mono/divalent ion selectivity of 103. Moreover, by varying the pH from 3 to 8 the ion selectivity can be tuned further by a factor of 102 to 104. Theoretical simulations indicate that ion-carboxyl interactions substantially reduce the energy barrier for monovalent cations to pass through the MOFSNC, and thus lead to ultrahigh ion selectivity. These findings suggest ways to develop ion selective devices for efficient ion separation, energy reservation and power generation.

Enhancing Multicomponent Metal-Organic Frameworks for Low Pressure Liquid Organic Hydrogen Carrier Separations.

The resurgence of interest in the hydrogen economy could hinge on the distribution of hydrogen in a safe and efficient manner. Whilst great progress has been made with cryogenic hydrogen storage or liquefied ammonia, liquid organic hydrogen carriers (LOHCs) remain attractive due to their lack of need for cryogenic temperatures or high pressures, most commonly a cycle between methylcyclohexane and toluene. Oxidation of methylcyclohexane to release hydrogen will be more efficient if the equilibrium limitations can be removed by separating the mixture. This report describes a family of six ternary and quaternary multicomponent metal-organic frameworks (MOFs) that contain the three-dimensional cubane-1,4-dicarboxylate (cdc) ligand. Of these MOFs, the most promising is a quaternary MOF (CUB-30), comprising cdc, 4,4'-biphenyldicarboxylate (bpdc) and tritopic truxene linkers. Contrary to conventional wisdom that adsorptive interactions with larger, hydrocarbon guests are dominated by π-π interactions, here we report that contoured aliphatic pore environments can exhibit high selectivity and capacity for LOHC separations at low pressures. This is the first time, to the best of our knowledge, where selective adsorption for cyclohexane over benzene is witnessed, underlining the unique adsorptive behavior afforded by the unconventional cubane moiety.