Record-Low Thermal Boundary Resistance between Diamond and GaN-on-SiC for Enabling Radiofrequency Device Cooling.

The implementation of 5G-and-beyond networks requires faster, high-performance, and power-efficient semiconductor devices, which are only possible with materials that can support higher frequencies. Gallium nitride (GaN) power amplifiers are essential for 5G-and-beyond technologies since they provide the desired combination of high frequency and high power. These applications along with terrestrial hub and backhaul communications at high power output can present severe heat removal challenges. The cooling of GaN devices with diamond as the heat spreader has gained significant momentum since device self-heating limits GaN's performance. However, one of the significant challenges in integrating polycrystalline diamond on GaN devices is maintaining the device performance while achieving a low diamond/GaN channel thermal boundary resistance. In this study, we achieved a record-low thermal boundary resistance of around 3.1 ± 0.7 m2 K/GW at the diamond/Si3N4/GaN interface, which is the closest to theoretical prediction to date. The diamond was integrated within ∼1 nm of the GaN channel layer without degrading the channel's electrical behavior. Furthermore, we successfully minimized the residual stress in the diamond layer, enabling more isotropic polycrystalline diamond growth on GaN with thicknesses >2 µm and a ∼1.9 µm lateral grain size. More isotropic grains can spread the heat in both vertical and lateral directions efficiently. Using transient thermoreflectance, the thermal conductivity of the grains was measured to be 638 ± 48 W/m K, which when combined with the record-low thermal boundary resistance makes it a leading-edge achievement.

Experimental observation of localized interfacial phonon modes.

Interfaces impede heat flow in micro/nanostructured systems. Conventional theories for interfacial thermal transport were derived based on bulk phonon properties of the materials making up the interface without explicitly considering the atomistic interfacial details, which are found critical to correctly describing thermal boundary conductance. Recent theoretical studies predicted the existence of localized phonon modes at the interface which can play an important role in understanding interfacial thermal transport. However, experimental validation is still lacking. Through a combination of Raman spectroscopy and high-energy-resolution electron energy-loss spectroscopy in a scanning transmission electron microscope, we report the experimental observation of localized interfacial phonon modes at ~12 THz at a high-quality epitaxial Si-Ge interface. These modes are further confirmed using molecular dynamics simulations with a high-fidelity neural network interatomic potential, which also yield thermal boundary conductance agreeing well with that measured in time-domain thermoreflectance experiments. Simulations find that the interfacial phonon modes have an obvious contribution to the total thermal boundary conductance. Our findings significantly contribute to the understanding of interfacial thermal transport physics and have impact on engineering thermal boundary conductance at interfaces in applications such as electronics thermal management and thermoelectric energy conversion.

Steady-state methods for measuring in-plane thermal conductivity of thin films for heat spreading applications.

The development of high thermal conductivity thin film materials for the thermal management of electronics requires accurate and precise methods for characterizing heat spreading capability, namely, in-plane thermal conductivity. However, due to the complex nature of thin film thermal property measurements, resolving the in-plane thermal conductivity of high thermal conductivity anisotropic thin films with high accuracy is particularly challenging. Capable transient techniques exist; however, they usually measure thermal diffusivity and require heat capacity and density to deduce thermal conductivity. Here, we present an explicit uncertainty analysis framework for accurately resolving in-plane thermal conductivity via two independent steady-state thermometry techniques: particle-assisted Raman thermometry and electrical resistance thermometry. Additionally, we establish error-based criteria to determine the limiting experimental conditions that permit the simplifying assumption of one-dimensional thermal conduction to further reduce thermal analysis. We demonstrate the accuracy and precision (<5% uncertainty) of both steady-state techniques through in-plane thermal conductivity measurements of anisotropic nanocrystalline diamond thin films.