Optical Cavity Design and Functionality for Molecular Strong Coupling.

Optical cavity/molecule strong coupling offers attractive opportunities to modulate photochemical or photophysical processes. When atoms or molecules are placed in an optical cavity, they can coherently exchange photonic energy with optical cavity vacuum fields, entering the strong coupling interaction regime. Recent work suggests that the thermodynamic and kinetic properties of molecules can be significantly changed by strong coupling, resulting in the emergence of intriguing photochemical and photophysical phenomena. As more and more physico-chemical systems are studied under strong coupling conditions, optical cavities have also advanced in their sophistication, responsiveness, and (multi)functionality. In this review, we highlight some of these recent developments, particularly focusing on Fabry-Perot microcavities.

Visualizing Ribbon-to-Ribbon Heterogeneity of Chemically Unzipped Wide Graphene Nanoribbons by Silver Nanowire-Based Tip-Enhanced Raman Scattering Microscopy.

Graphene nanoribbons (GNRs), a quasi-one-dimensional form of graphene, have gained tremendous attention due to their potential for next-generation nanoelectronic devices. The chemical unzipping of carbon nanotubes is one of the attractive fabrication methods to obtain single-layered GNRs (sGNRs) with simple and large-scale production.  The authors recently found that unzipping from double-walled carbon nanotubes (DWNTs), rather than single- or multi-walled, results in high-yield production of crystalline sGNRs. However, details of the resultant GNR structure, as well as the reaction mechanism, are not fully understood due to the necessity of nanoscale spectroscopy. In this regard, silver nanowire-based tip-enhanced Raman spectroscopy (TERS) is applied for single GNR analysis and investigated ribbon-to-ribbon heterogeneity in terms of defect density and edge structure generated through the unzipping process.  The authors found that sGNRs originated from the inner walls of DWNTs showed lower defect densities than those from the outer walls. Furthermore, TERS spectra of sGNRs exhibit a large variety in graphitic Raman parameters, indicating a large variation in edge structures. This work at the single GNR level reveals, for the first time, ribbon-to-ribbon heterogeneity that can never be observed by diffraction-limited techniques and provides deeper insights into unzipped GNR structure as well as the DWNT unzipping reaction mechanism.

A light-mediated covalently patterned graphene substrate for graphene-enhanced Raman scattering (GERS).

We report covalently patterned graphene with acetic acid as a new potential candidate for graphene-enhanced Raman scattering (GERS). Rhodamine 6G molecules in direct contact with the covalently modified region show an enormous enhancement (∼25 times) compared to the pristine region at 532 nm excitation. The GERS enhancement with respect to the layer thickness of the probed molecule, excitation wavelength, and covalently attached groups is discussed.

Molecular Chemistry in Cavity Strong Coupling.

The coherent exchange of energy between materials and optical fields leads to strong light-matter interactions and so-called polaritonic states with intriguing properties, halfway between light and matter. Two decades ago, research on these strong light-matter interactions, using optical cavity (vacuum) fields, remained for the most part the province of the physicist, with a focus on inorganic materials requiring cryogenic temperatures and carefully fabricated, high-quality optical cavities for their study. This review explores the history and recent acceleration of interest in the application of polaritonic states to molecular properties and processes. The enormous collective oscillator strength of dense films of organic molecules, aggregates, and materials allows cavity vacuum field strong coupling to be achieved at room temperature, even in rapidly fabricated, highly lossy metallic optical cavities. This has put polaritonic states and their associated coherent phenomena at the fingertips of laboratory chemists, materials scientists, and even biochemists as a potentially new tool to control molecular chemistry. The exciting phenomena that have emerged suggest that polaritonic states are of genuine relevance within the molecular and material energy landscape.

SERS Endoscopy for Monitoring Intracellular Drug Dynamics.

Understanding the dynamics and distribution of medicinal drugs in living cells is essential for the design and discovery of treatments. The tools available for revealing this information are, however, extremely limited. Here, we report the application of surface-enhanced Raman scattering (SERS) endoscopy, using plasmonic nanowires as SERS probes, to monitor the intracellular fate and dynamics of a common chemo-drug, doxorubicin, in A549 cancer cells. The unique spatio-temporal resolution of this technique reveals unprecedented information on the mode of action of doxorubicin: its localization in the nucleus, its complexation with medium components, and its intercalation with DNA as a function of time. Notably, we were able to discriminate these factors for the direct administration of doxorubicin or the use of a doxorubicin delivery system. The results reported here show that SERS endoscopy may have an important future role in medicinal chemistry for studying the dynamics and mechanism of action of drugs in cells.

Liquid-phase photo-induced covalent modification (PICM) of single-layer graphene by short-chain fatty acids.

We report an efficient photo-induced covalent modification (PICM) of graphene by short-chain fatty acids (SCFAs) with an alkyl chain at the liquid-solid interface for spatially resolved chemical functionalization of graphene. Light irradiation on monolayer graphene under an aqueous solution of the SCFAs with an alkyl chain efficiently introduces sp3-hybridized defects, where the reaction rates of PICM are significantly higher than those in pure water. Raman and IR spectroscopy revealed that a high density of methyl, methoxy, and acetate groups is covalently attached to the graphene surface while it was partially oxidized by other oxygen-containing functional groups, such as OH and COOH. A greater downshift of the G-band in Raman spectra was observed upon the PICM with longer alkyl chains, suggesting that the charge doping effect can be controlled by the alkyl chain length of the SCFAs. The systematic research and exploration of covalent modification in SCFAs provide new insight and a potentially facile method for bandgap engineering of graphene.

Length-Controllable Gold-Coated Silver Nanowire Probes for High AFM-TERS Scattering Activity.

Tip-enhanced Raman scattering (TERS) microscopy is an advanced technique for investigation at the nanoscale that provides topographic and chemical information simultaneously. The TERS probe plays a crucial role in the microscopic performance. In the recent past, the development of silver nanowire (AgNW) based TERS probes solved the main tip fabrication issues, such as low mechanical strength and reproducibility. However, this fabrication method still suffers from low control of the protruded length of the AgNW. In this work, a simple water-air interface electrocutting method is proposed to achieve wide controllability of the length. This water cutting method was combined with a succedent Au coating on the AgNW surface, and the probe achieved an up to 100× higher enhancement factor (EF) and a 2× smaller spatial resolution compared to pristine AgNW. Thanks to this excellent EF, the water-cut Au-coated AgNW probes were found to possess high TERS activity even in the nongap mode, enabling broad applications.

Autotuning of Vibrational Strong Coupling for Site-Selective Reactions.

Site-selective chemistry opens new paths for the synthesis of technologically important molecules. When a reactant is placed inside a Fabry-Perot (FP) cavity, energy exchange between molecular vibrations and resonant cavity photons results in vibrational strong coupling (VSC). VSC has recently been implicated in modified chemical reactivity at specific reactive sites. However, as a reaction proceeds inside an FP cavity, the refractive index of the reaction solution changes, detuning the cavity mode away from the vibrational mode and weakening the VSC effect. Here we overcome this issue, developing actuatable FP cavities to allow automated tuning of cavity mode energy to maintain maximized VSC during a reaction. As an example, the site-selective reaction of the aldehyde over the ketone in 4-acetylbenzaldehyde is achieved by automated cavity tuning to maintain optimal VSC of the ketone carbonyl stretch during the reaction. A nearly 50 % improvement in site-selective reactivity is observed compared to an FP cavity with static mirrors, demonstrating the utility of actuatable FP cavities as microreactors for organic chemistry.

All-Optical and One-Color Rewritable Chemical Patterning on Pristine Graphene under Water.

We report a facile all-optical method for spatially resolved and reversible chemical modification of a graphene monolayer. A tightly focused laser on graphene under water introduces an sp3-type chemical defect by photo-oxidation. The sp3-type defects can be reversibly restored to sp2 carbon centers by the same laser with higher intensity. The photoreduction occurs due to laser-induced local heating on the graphene. These optical methods combined with a laser direct writing technique allow photowriting and erasing of a well-defined chemical pattern on a graphene canvas with a spatial resolution of about 300 nm. The pattern is visualized by Raman mapping with the same excitation laser, enabling an optical read-out of the chemical information on the graphene. Here, we successfully demonstrate all-optical Write/Read-out/Erase of chemical functionalization patterns on graphene by simply adjusting the one-color laser intensity. The all-optical method enables flexible and efficient tailoring of physicochemical properties in nanoscale for future applications.

Gold-coated silver nanowires for long lifetime AFM-TERS probes.

Tip-enhanced Raman scattering (TERS) microscopy is an advanced technique for investigation at the nanoscale because of its excellent properties, such as its label-free functionality, non-invasiveness, and ability to simultaneously provide topographic and chemical information. The probe plays a crucial role in TERS technique performance. Widely used AFM-TERS probes fabricated with metal deposition suffer from relatively low reproductivity as well as limited mapping and storage lifetime. To solve the reproducibility issue, silver nanowire (AgNW)-based TERS probes were developed, which, thanks to the high homogeneity of the liquid-phase synthesis of AgNW, can achieve high TERS performance with excellent probe reproductivity, but still present short lifetime due to probe oxidation. In this work, a simple Au coating method is proposed to overcome the limited lifetime and improve the performance of the AgNW-based TERS probe. For the Au-coating, different [Au]/[Ag] molar ratios were investigated. The TERS performance was evaluated in terms of changes in the enhancement factor (EF) and signal-to-noise ratio through multiple mappings and the storage lifetime in air. The Au-coated AgNWs exhibited higher EF than pristine AgNWs and galvanically replaced AgNWs with no remarkable difference between the two molar ratios tested. However, for longer scanning time and multiple mappings, the probes obtained with low Au concentration showed much longer-term stability and maintained a high EF. Furthermore, the Au-coated AgNW probes were found to possess a longer storage lifetime in air, allowing for long and multiple TERS mappings with one single probe.

Selective crystallization via vibrational strong coupling.

The coupling of (photo)chemical processes to optical cavity vacuum fields is an emerging method for modulating molecular and material properties. Recent reports have shown that strong coupling of the vibrational modes of solvents to cavity vacuum fields can influence the chemical reaction kinetics of dissolved solutes. This suggests that vibrational strong coupling might also effect other important solution-based processes, such as crystallization from solution. Here we test this hitherto unexplored notion, investigating pseudopolymorphism in the crystallization from water of ZIF metal-organic frameworks inside optical microcavities. We find that ZIF-8 crystals are selectively obtained from solution inside optical microcavities, where the OH stretching vibration of water is strongly coupled to cavity vacuum fields, whereas mixtures of ZIF-8 and ZIF-L are obtained otherwise. Moreover, ZIF crystallization is accelerated by solvent vibrational strong coupling. This work suggests that cavity vacuum fields might become a tool for materials synthesis, biasing molecular self-assembly and driving macroscopic material outcomes.

Adaptive Optical Two-Photon Microscopy for Surface-Profiled Living Biological Specimens.

We developed adaptive optical (AO) two-photon excitation microscopy by introducing a spatial light modulator (SLM) in a commercially available microscopy system. For correcting optical aberrations caused by refractive index (RI) interfaces at a specimen's surface, spatial phase distributions of the incident excitation laser light were calculated using 3D coordination of the RI interface with a 3D ray-tracing method. Based on the calculation, we applied a 2D phase-shift distribution to a SLM and achieved the proper point spread function. AO two-photon microscopy improved the fluorescence image contrast in optical phantom mimicking biological specimens. Furthermore, it enhanced the fluorescence intensity from tubulin-labeling dyes in living multicellular tumor spheroids and allowed successful visualization of dendritic spines in the cortical layer V of living mouse brains in the secondary motor region with a curved surface. The AO approach is useful for observing dynamic physiological activities in deep regions of various living biological specimens with curved surfaces.

Data science assisted investigation of catalytically active copper hydrate in zeolites for direct oxidation of methane to methanol using H2O2.

Dozens of Cu zeolites with MOR, FAU, BEA, FER, CHA and MFI frameworks are tested for direct oxidation of CH4 to CH3OH using H2O2 as oxidant. To investigate the active structures of the Cu zeolites, 15 structural variables, which describe the features of the zeolite framework and reflect the composition, the surface area and the local structure of the Cu zeolite active site, are collected from the Database of Zeolite Structures of the International Zeolite Association (IZA). Also analytical studies based on inductively coupled plasma-optical emission spectrometry (ICP-OES), X-ray fluorescence (XRF), N2 adsorption specific surface area measurement and X-ray absorption fine structure (XAFS) spectral measurement are performed. The relationships between catalytic activity and the structural variables are subsequently revealed by data science techniques, specifically, classification using unsupervised and supervised machine learning and data visualization using pairwise correlation. Based on the unveiled relationships and a detailed analysis of the XAFS spectra, the local structures of the Cu zeolites with high activity are proposed.

Li@C60 thin films: characterization and nonlinear optical properties.

Organic materials have attracted considerable attention in nonlinear optical (NLO) applications as they have several advantages over inorganic materials, including high NLO response, and fast response time as well as low-cost and easy fabrication. Lithium-containing C60 (Li@C60) is promising for NLO over other organic materials because of its strong NLO response proven by theoretical and experimental studies. However, the low purity of Li@C60 has been a bottleneck for applications in the fields of solar cells, electronics and optics. In 2010, highly purified Li@C60 was finally obtained, encouraging further studies. In this study, we demonstrate a facile method to fabricate thin films of Li@C60 and their strong NLO potential for high harmonic generation by showing its comparatively strong emission of degenerate-six-wave mixing, a fifth-order NLO effect.

Label-free visualization of heterogeneities and defects in metal-organic frameworks using nonlinear optics.

Defects influence the properties of metal-organic frameworks (MOFs), such as their storage amount and the diffusion kinetics of gas molecules. However, the spatial distribution of defects is still poorly understood due to a lack of visualization methods. Here, we present a new method using nonlinear optics (NLO) that allows the visualization of defects within MOFs.

Recent Progress in Vibropolaritonic Chemistry.

Vibrational polaritonic chemistry is emerging as an exciting new sub-field of chemistry, one in which strong interactions with optical cavity vacuum fields are another degree of freedom alongside temperature, solvent, catalyst, and so on to modify thermochemical reactivity. The field stands at a fascinating juncture with experimental works on a variety of organic reactions continuing to blossom, just as many theoretical works appear which diverge significantly in their predictions compared to experiments. The outlook for the field is no doubt an exciting one as it seeks to unify the observed novel optical cavity-induced chemical phenomena with satisfying accompanying physical theory. In this minireview we highlight experimental works on vibrational polaritonic chemistry that have appeared most recently, focusing on the chemistry of the rate-limiting steps to provide mechanistic insight. We hope this review will encourage synthetic chemists to enter the field and we discuss the opportunities and challenges that lie ahead as polaritonic chemistry grows into the future.

Current Contributions of Organofluorine Compounds to the Agrochemical Industry.

Currently, more than 1,200 agrochemicals are listed and many of these are regularly used by farmers to generate the food supply to support the expanding global population. However, resistance to pesticides is an ever more frequently occurring phenomenon, and thus, a continuous supply of novel agrochemicals with high efficiency, selectivity, and low toxicity is required. Moreover, the demand for a more sustainable society, by reducing the risk chemicals pose to human health and by minimizing their environmental footprint, renders the development of novel agrochemicals an ever more challenging undertaking. In the last two decades, fluoro-chemicals have been associated with significant advances in the agrochemical development process. We herein analyze the contribution that organofluorine compounds make to the agrochemical industry. Our database covers 424 fluoro-agrochemicals and is subdivided into several categories including chemotypes, mode of action, heterocycles, and chirality. This in-depth analysis reveals the unique relationship between fluorine and agrochemicals.

Pseudo-Membrane Jackets: Two-Dimensional Coordination Polymers Achieving Visible Phase Separation in Cell Membrane.

Cell membranes contain lateral systems that consist of various lipid compositions and actin cytoskeleton, providing two-dimensional (2D) platforms for chemical reactions. However, such complex 2D environments have not yet been used as a synthetic platform for artificial 2D nanomaterials. Herein, we demonstrate the direct synthesis of 2D coordination polymers (CPs) at the liquid-cell interface of the plasma membrane of living cells. The coordination-driven self-assembly of networking metal complex lipids produces cyanide-bridged CP layers with metal ions, enabling "pseudo-membrane jackets" that produce long-lived micro-domains with a size of 1-5 µm. The resultant artificial and visible phase separation systems remain stable even in the absence of actin skeletons in cells. Moreover, we show the cell application of the jackets by demonstrating the enhancement of cellular calcium response to ATP.

Multicolour photochromic fluorescence of a fluorophore encapsulated in a metal-organic framework.

A fluorophore encapsulated in a metal-organic framework showed photochromic multicolour fluorescence. Irradiation with an ultraviolet laser induced the relocation of the fluorophore from a polar to a nonpolar environment, altering the emission from red to blue. This change in emission color can be repeatably recovered by heating the fluorophore-MOF composite.

Controlled Fabrication of Optical Signal Input/Output Sites on Plasmonic Nanowires.

Silver nanowires have attracted considerable attention as subdiffraction limited diameter waveguides in a variety of applications including cell endoscopy and photonic integrated circuitry. Optical signal transport occurs by coupling light into propagating surface plasmons, which scatter back into light further along the wire. However, these interconversions only occur efficiently at wire ends, or at defects along the wire, which are not controlled during synthesis. Here, we overcome this limitation, demonstrating the visible laser light-induced fabrication of gold nanostructures at desired positions on silver nanowires, and their utility as efficient in/out coupling points for light. The gold nanostructures grow via plasmon-induced reduction of Au(III) and are shown to be excellent "hotspots" for surface-enhanced Raman scattering.