Chromatographic Data Segmentation Method: A Hybrid Analytical Approach for the Investigation of Antiviral Substances in Medicinal Plant Extracts.

The methodology described in this article will significantly reduce the time required for understanding the relations between chromatographic data and bioactivity assays. The methodology is a hybrid of hypothesis-based and data-driven scientific approaches. In this work, a novel chromatographic data segmentation method is proposed, which demonstrates the capability of finding what volatile substances are responsible for antiviral and cytotoxic effects in the medicinal plant extracts. Up until now, the full potential of the separation methods has not been exploited in the life sciences. This was due to the lack of data ordering methods capable of adequately preparing the chromatographic information. Furthermore, the data analysis methods suffer from multidimensionality, requiring a large number of investigated data points. A new method is described for processing any chromatographic information into a vector. The obtained vectors of highly complex and different origin samples can be compared mathematically. The proposed method, efficient with relatively small sized data sets, does not suffer from multidimensionality. In this novel analytical approach, the samples did not need fractionation and purification, which is typically used in hypothesis-based scientific research. All investigations were performed using crude extracts possessing hundreds of phyto-substances. The antiviral properties of medicinal plant extracts were investigated using gas chromatography-mass spectrometry, antiviral tests, and proposed data analysis methods. The findings suggested that (i) ß- cis-caryophyllene, linalool, and eucalyptol possess antiviral activity, while (ii) thujones do not, and (iii) α-thujone, ß-thujone, cis- p-menthan-3-one, and estragole show cytotoxic effects.

Precautions to improve the accuracy of quantitative determinations of biomarkers in clinical diagnostics.

Although protein biomarkers have a great potential as biomarkers for diagnosis of diseases, they are seldom used in hospitals. There are many reasons for this, for instance, the difficulties to (i) find a biomarker for which the concentration in body fluids clearly differs between patients and healthy subjects, (ii) attain purification of the biomarker close to 100%, which is required for production of conventional protein antibodies as well as artificial gel antibodies for selective capture of a biomarker, (iii) design a standard curve for rapid and accurate determination of the concentration of the biomarker in the body fluid because of adsorption of the biomarker onto vials, pipettes, etc., (iv) determine accurately the sample volume delivered by a pipette, (v) avoid polymerization of the biomarker upon storage and to decide whether it is in the form not only of monomers, but also of dimers, trimers, etc., in the native state, (vi) determine the degree of possible glycosylation and amidation of the biomarker and (vii) decide whether glycosylation and amidation positively or negatively affects the possibility to use the protein as a biomarker. In this article, we discuss in quantitative terms the difficulties (iii-vii) and how to overcome them, which also may help to overcome the difficulty (ii), which in turn minimizes difficulty (i).

General approach for certain quantitative calculations for instance of the variance of reversible adsorption to the capillary wall in CE.

Miniaturization of analytical separation methods offers several advantages, including short run times, high resolution, and high recovery of the sample constituents. To optimize these parameters, the reversible adsorption (to minimize loss in resolution), as well as the irreversible adsorption (to minimize loss of analytes) must be quantified.However, no useful equation is available for the calculation of the variance of reversible adsorption. Therefore,we have taken another approach to quantify the reversible interaction. The method is unique and important since no equation for calculation of this variance is required. Instead, two experiments are required, which are run under such conditions that the variance of a certain parameter has the same numerical value in the two experiments (one with and without EOF), except for the variance of reversible adsorption. The approach is universal in the sense that it can be used for many different mathematical concepts and be modified to also cover certain functions other than a sum of parameters.We have also introduced a simple expression for their reversible adsorption, which shows that the hydrophobic interaction from only two methyl groups in the coating gives rise to as much as 40-50% loss of protein, and the width of the zones in the capillary with this coating was 8-15% larger compared to the zone width in the polyacrylamide-coated capillaries. The reproducibility in migration time, peak area, and peak width in two consecutive runs in capillaries with two methyl groups in the coating was very low, but in EOF-free polyacrylamide-coated capillaries extremely high, indicating that the reversible and irreversible adsorption of proteins to this coating is negligible. The scanning detector, frequently used in free zone electrophoresis in the 1960s-1970s, gives true separation parameters and is, therefore, much preferable to the stationary detector used in most CE experiments, because this detector gives apparent separation parameters.

Highly selective artificial gel antibodies for detection and quantification of biomarkers in clinical samples. II. Albumin in body fluids of patients with neurological disorders.

We have previously used the molecular-imprinting method for the synthesis of artificial gel antibodies, highly selective for various proteins. In the present work, we have synthesized artificial gel antibodies against human albumin with the aim to develop a simple and rapid procedure to measure the concentration of this protein in samples of clinical interest. The procedure, based on the design of a standard curve (see the preceding paper), was applied on a quantitative analysis of albumin in human plasma and cerebrospinal fluid (CSF). We found that our technique permitted detection of albumin in these body fluids with high precision and that the concentration of this protein was significantly enhanced in CSF from patients with amyotrophic lateral sclerosis (ALS), compared to control samples. This finding is in agreement with results from earlier studies, which confirms the validity of our analysis technique and suggests that the barrier permeability may be affected in ALS, perhaps also for other proteins. No enhancement in plasma levels of albumin was seen in patients with ALS, but rather a decrease. The results further indicate that our approach might also apply well to other biomarkers for the actual neurological disease and other disorders.

Highly selective artificial gel antibodies for detection and quantification of biomarkers in clinical samples. I. Spectrophotometric approach to design the calibration curve for the quantification.

High selectivity of a biomarker is a basic requirement when it is used for diagnosis, prognosis and treatment of a disease. The artificial gel antibodies, which we synthesise by a molecular imprinting method, have this property not only for proteins, but also for bioparticles, such as viruses and bacteria. However, diagnosis of a disease requires not only that the biomarker can be "fished out" from a body fluid with high selectivity, but also that its concentration in the sample can rapidly be determined and preferably by a simple technique. This paper deals primarily with the development of a spectrophotometric method, which is so simple and fast that it can be used with advantage in a Doctor's Office. The development of this method was not straight-forward. However, by modifications of the performance of these measurements we can now design standard curves in the form of a straight line, when we plot the true (not the recorded "apparent" absorption) against known protein concentrations. In an additional publication (see the following paper in this issue of JSS) we show an application of such a plot: determination of the concentration of albumin in serum and cerebrospinal fluid from patients with neurological disorders to investigate whether albumin is a biomarker for these diseases.

Renewable enzyme reactors based on beds of artificial gel antibodies.

A novel approach is described for the synthesis of beds for enzyme reactors. The method is based on the use of artificial antibodies in the form of polyacrylamide gel particles with diameters around 0.1-0.3 mm. These gel particles mimic protein antibodies, raised in experimental animals, in the sense that they selectively recognize and adsorb only the protein present during the preparation of the "antibodies". The gel antibodies have several advantages over conventional protein antibodies, which can be taken advantage of in the design of enzyme reactors; for instance, if upon prolonged use the immobilized enzyme loses its activity it can easily be replaced by an active enzyme, which is not possible when the enzyme is immobilized via a conventional protein antibody (a new bed with immobilized protein antibodies must be prepared); and equally or more remarkable: the enzyme can be applied in the form of a non-purified extract since the selectivity of the artificial gel antibodies is so high that they will "fish-out" the enzyme, but no other proteins in the extract. In addition, no preconcentration of the enzyme solution is required prior to the immobilization, since the enzyme is enriched at the top of the column upon the application. These unique properties make enzyme reactors based on artificial gel antibodies very attractive, also in process chromatography. The potential application range of the artificial gel antibodies is enormous since the same method for their synthesis can be used independent of the structure and the size of the "antigen"; for instance, renewable biosensors based on gel antibodies for the selective detection of protein biomarkers, as well as pathogenic viruses, bacteria, and spores (for instance Anthrax) should not be difficult to design.

A new approach for on-line enrichment in electrophoresis of dilute protein solutions.

A method is described for on-line enrichment/zone sharpening of a sample of negatively charged proteins (an analogous method for cationic proteins can be designed). The sample is applied on the top of a 5-mm thick layer of a neutral polyacrylamide gel which rests on another 5-mm thick, large-pore polyacrylamide gel which contains positively charged groups. The latter gel layer is attached to the neutral gel column, used for the electrophoretic separation of the proteins. When a voltage is applied the proteins start migrating and become electrostatically adsorbed at the top of the charged, large-pore gel layer (pH 5.4). With the upper electrode vessel filled with a buffer of a pH higher (pH 7.7) than that employed in the enrichment step and with a voltage between the electrodes, these enriched proteins are released (because the enrichment gel is non-charged at pH 7.7) with zone sharpening and migrate into the 5-cm long column (i.d. 5 mm) of a neutral, large-pore polyacrylamide gel for electrophoretic analysis. Upon the electrophoretic migration from the enrichment gel into the separation gel a second zone sharpening may occur, if the increase in pH from 5.4 to 7.7 in the separation gel is not close to momentary. By employing colored test proteins the efficiency of the enrichment step is visually illustrated by a picture. The principle of the concentration method described has been employed also in chromatographic experiments and can with appropriate modifications also be used in other electrophoretic methods, such as capillary electrophoresis.

Universal method for synthesis of artificial gel antibodies by the imprinting approach combined with a unique electrophoresis technique for detection of minute structural differences of proteins, viruses and cells (bacteria). Ib. Gel antibodies against proteins (hemoglobins).

Using the molecular imprinting approach, we have shown that polyacrylamide-based artificial antibodies against human and bovine hemoglobin have a very high selectivity, as revealed by the free-zone electrophoresis in a revolving capillary. By the same technique we have previously synthesized gel antibodies not only against proteins but also against viruses and bacteria. The synthesis is thus universal, i.e., it has the great advantage of not requiring a modification - or only a slight one - for each particular antigen. The combination synthesis of artificial gel antibodies and electrophoretic analysis reveals small discrepancies in shape and chemical composition not only of proteins, as shown here and in paper Ia, but also of viruses and bacteria, to be illustrated in papers II and III in this series. Upon rehydration, the freeze-dried gel antibodies, selective for human hemoglobin, regain their selectivity. The gel antibodies can repeatedly be used following the removal of the antigen (protein in this study) from the complex gel antibody/antigen by an SDS washing or an enzymatic degradation.

Universal method for synthesis of artificial gel antibodies by the imprinting approach combined with a unique electrophoresis technique for detection of minute structural differences of proteins, viruses, and cells (bacteria). III: gel antibodies against cells (bacteria).

Artificial antibodies in the form of gel granules were synthesized from the monomers acrylamide and N,N'-methylenebisacrylamide by the imprinting method in the presence of Echerichia coli bacteria as template. The electrophoretic migration velocities of the gel antibodies (i) saturated with the antigen (Escherichia coli MRE-600), (ii) freed of the antigen, and (iii) resaturated with bacteria, were determinated by electrophoresis in a rotating narrow-bore tube of 245 mm length and the 2.5 and 9.6 mm inner and outer diameters, respectively. Removal of bacteria from the gel antibodies was made by treatment with enzymes, followed by washing with SDS and buffer. Gel granules becoming charged by adsorption of bacteria move in an electrical field. We obtained a significant selectivity of gel antibodies for E. coli MRE-600, since the granules did not interact with Lactococcus lactis; and when E. coli BL21 bacteria were added to the gels selective for E. coli MRE-600, a significant difference in the migration rate of the complexes formed with the two strains was observed indicating the ability of differentiation between the two strains. The gel antibodies can be used repeatedly. The new imprinting method for the synthesis of artificial gel antibodies against bioparticles described herein, and the classical electrophoretic analysis technique employed, thus represent - when combined - a new approach to distinguish between different types and strains of bacteria. The application area can certainly be extended to cover other classes of cells.

CE to monitor endotoxins by protein complexation.

A new CE method for fast and efficient analysis of bacterial endotoxins (lipopolysaccharides) is described. It is based on the strong interaction between proteins and endotoxins. The UV absorption of the protein component in the complex is used for the detection. The electrophoretic mobility of the complex hemoglobin/endotoxin can be employed for qualitative analysis of the endotoxin. For instance, the structural differences between "smooth" and "rough" lipopolysaccharides from Salmonella minnesota (wild-type), Salmonella minnesota R595 and Shigella sonnei R562H are reflected in the electrophoretic mobilities of their hemoglobin complex.

Monolithic beds of artificial gel antibodies.

The introductions of the continuous beds, now often called monoliths [S. Hjertén, J.-L. Liao, R. Zhang, J. Chromatogr. 473 (1989), 273-275] and the artificial, highly selective gel antibodies against antigens as large as proteins, viruses and cells [J.-L. Liao, Y. Wang, S. Hjertén, Chromatographia 42 (1996), 259-262] were breakthroughs in the design of chromatographic beds. This paper deals with a combination of these two methods, i.e., the artificial gel antibodies have been synthesized in the monolithic mode. As antigen we have used human hemoglobin. A comparison of the ion-exchange chromatograms of the eluates from the monolithic columns shows that the monolith prepared in the presence of hemoglobin adsorbed this protein, but not the other proteins in the sample (ribonuclease A and cytochrome c), i.e., this monolith was selective for hemoglobin, whereas the blank column (prepared in the absence of hemoglobin) had no selective properties, since none of the applied proteins were adsorbed. The diameter of the column was 6mm, but the same approach to synthesize a monolithic selective bed can very likely also be used for capillaries and microchips.

Universal method for synthesis of artificial gel antibodies by the imprinting approach combined with a unique electrophoresis technique for detection of minute structural differences of proteins, viruses, and cells (bacteria): Ia. gel antibodies against proteins (transferrins).

Artificial antibodies in the form of gel granules were prepared by the molecular imprinting technique from the monomers acrylamide and N,N'-methylene-bis-acrylamide. Gel granules, freed from the selectively adsorbed protein (the antigen), are neutral and, accordingly, do not migrate in an electrical field. However, upon selective interaction with the antigen at a pH different from its pI, the granules become charged. The selectivity of the gel antibodies was studied by free zone electrophoresis in a tube with inside diameter larger than the size of the granules. Such electrophoretic analyses showed that gel antibodies against iron-free transferrin had a high selectivity for this protein, although some crossreaction took place with iron-saturated transferrin, indicating that these artificial antibodies can easily distinguish the minute differences in the 3-D structure of the transferrins. Analogously, gel antibodies against iron-saturated transferrin were highly selective for this protein with some crossreaction with iron-free transferrin. The mobilities of iron-free and iron-saturated transferrin are very similar, and, therefore, capillary free zone electrophoresis cannot distinguish between these structurally related proteins. However, significant differences in the mobilities of the selective gel granules can be observed depending on their interaction with iron-free or iron-saturated transferrin, i.e., the artificial gel antibodies may become powerful analytical tools.

Universal method for synthesis of artificial gel antibodies by the imprinting approach combined with a unique electrophoresis technique for detection of minute structural differences of proteins, viruses, and cells (bacteria): II. Gel antibodies against virus (Semliki Forest Virus).

Artificial and highly selective antibodies (in the form of gel granules) against proteins can easily be synthesized by a simple, cost-effective imprinting technique [Liao, J.-L. et al., Chromatographia 1996, 42, 259-262]. Using the same method for synthesis of gel antibodies against viruses in combination with analysis by free zone electrophoresis in a rotating narrow bore tube we have shown that artificial gel antibodies against Semliki Forest Virus (wild type) can sense the difference between this virus and a mutant, although they differ in their chemical composition only by three amino acids in one of the three proteins on the surface of the virus particle. The reason for this extremely high resolution is explained by the fact that we use three types of selectivity: (i) shape selectivity (created by the close fit between the antigen and its imprint in the gel), (ii) bond selectivity in the contact area between the antigen and its imprint in the gel antibody, and (iii) charge selectivity, originating from slightly different structures or/and conformations of the antigens.

Influence of ignored and well-known zone distortions on the separation performance of proteins in capillary free zone electrophoresis with special reference to analysis in polyacrylamide-coated fused silica capillaries in various buffers. I. Theoretical studies.

Distortion of the starting zone upon its electrophoretic migration toward the detection window gives rise to both symmetrical zones caused by diffusion, sedimentation in the horizontal section of the capillary and the curvature of the capillary, and asymmetrical zones having their origin in Joule heating, sedimentation in the vertical section of the capillary, pH and conductivity differences between the sample zone and the surrounding buffer, solute adsorption onto the capillary wall, and association-dissociation of complexes between the analyte and a buffer constituent or between analytes. Interestingly and importantly a theoretical study shows that moderate pH and conductivity differences as well as adsorption and all of the above interactions when they are characterized by a fast on/off kinetics do not increase the zone broadening (or only slightly), because the sharpening of one boundary of the zone is about the same as the broadening of the other boundary. In addition the peak symmetry caused by a conductivity difference is in most experiments counteracted by a pH difference. The experimentally determined plate numbers in the absence of electroosmosis exceeded one million per meter in some experiments (Part II). These plate numbers are among the highest reported [Z. Zhao, A. Malik, M.L. Lee, Anal. Chem. 65 (1993) 2747; M. Gilges, K. Kleemiss, G. Schomburg, Anal. Chem. 66 (1994) 2038; H. Wan, M. Ohman, L.G. Blomberg, J. Chromatogr. A 924 (2001) 591 (plate numbers determined in the presence of electroosmosis may be higher, although the width of the zone in the capillary may be larger) [p. 680 in S. Hjertén, Electrophoresis 11 (1990) 665]). Capillary free zone electrophoresis is perhaps the only separation method, which, under optimum conditions, gives a plate number not far from the theoretical limit. A prerequisite for this high performance is that the polyacrylamide-coated capillary is washed with 2 M HCl between the runs and stored in water over night (Part II). The difference between the experimentally determined total variance and the sum of the calculated variances originating from the width of the starting zone, longitudinal diffusion, Joule heating, sedimentation in the vertical section of the capillary, curvature of the capillary (i.e., the sum of all other variances) was in our most successful experiments about 28% of the variance of diffusion. The zone broadening, 2sigma, caused by diffusion was estimated at 0.77 mm. The total zone width (2sigma) calculated from the experimentally determined plate number was as small as 1 mm when the migration distance was 40 cm. Accordingly, the only efficient way to reduce drastically the total zone width is to decrease the analysis time and, thereby, the diffusional broadening. An important finding was that the variance originating from the loops of the capillary is not always negligible in high-performance runs. Therefore, one should employ straight capillaries and avoid CE apparatus with cartridges that require a strong curvature of the capillary, common in most commercial instruments. Mathematical formulas have been derived for the sedimentation of the solute zone, the enrichment factor, and the migration time in experiments where the solute is dissolved in a dilute running buffer. This zone sharpening method gave very narrow starting zones (0.04-0.4 mm). However, upon high dilution of the buffer the enrichment becomes so strong that part of the sample zone probably sediments out of the capillary; the almost inevitable change in pH may decrease the mobility of the proteins and, thus, cause the enrichment factor to become still lower than expected. Diffusion of the protein in the very narrow starting zone (located close to the tip of the capillary) and sometimes the thermal expansion of the buffer in the capillary contributes to additional loss of protein in the enrichment step. In some buffers, the interaction between the protein and the buffer constituents is so slow that the peaks become broad. Therefore, different types of buffers should be tested when high resolution is required. The relation sigma2 (the variance of the interaction between a protein and the buffer constituents) = constant x u (the mobility) seems to be valid for all proteins in the applied sample, at least when they have similar molecular masses. To facilitate the understanding of the progress of a free zone electrophoresis experiment, we have discussed in simple terms how the concentrations of the background electrolytes become rearranged during a run and why the difference between the mobilities of the proteins and the mobilities of the background electrolyte determines whether a peak exhibits fronting or tailing. A theoretical analysis of zone broadening in capillary zone electrophoresis, chromatography, and electrochromatography indicates that electrochromatography in homogeneous gels might be the only chromatographic technique which can compete in performance with free electrophoresis. Using an equation, valid not only for electrophoresis, but also for chromatography and centrifugation, the mobility of a concentration boundary has been calculated for the first time and was, as expected, low. Equations based on the Kohlrausch regulating function do not permit such calculations. Another regulating function (the H function) and some of its characteristics are briefly discussed. The theoretical discussions in this paper and the experimental studies in Part II show that high-performance electrophoresis deserves its prefix when the runs are designed to give minimum zone broadening. Some guidelines are given to facilitate this optimization. The plate numbers are so high that the resolution cannot be increased by more than 30% even if they approach the theoretically maximum values.

Influence of ignored and well-known zone distortions on the separation performance of proteins in capillary free zone electrophoresis with special reference to analysis in polyacrylamide-coated fused silica capillaries in various buffers. II. Experimental studies at acidic pH with on-line enrichment.

The separation of acidic and basic model proteins was studied in capillary free zone electrophoresis in a polyacrylamide-coated, electroosmosis-free capillary at pH below their isoelectric points (pI) using various buffers at pH 2.7-4.8 with UV detection at 200 nm. The separation performance was significantly dependent on the coating quality, which may even differ within the same batch of capillaries. In addition, a washing step with 2 M HCl and the storage of the capillary in distilled water was essential for the performance. For high efficiency and resolution the choice of buffer constituents was extremely important which is discussed in quantitative terms in Part I. The most promising buffers were ammonium acetate and ammonium hydroxyacetate at pH 4 (ionic strengths: 0.12 and 0.15 M, respectively) with plate numbers up to 1,700,000 plates/m, corresponding to a zone width (2sigma) of only 1 mm in a capillary with 40 cm effective length, when the injected samples were dissolved in a 10-fold diluted background electrolyte (BGE), a zone even narrower than those obtained in polyacrylamide gel electrophoresis, the characteristic feature of which is remarkably thin zones. In the experiment giving this plate number, the calculated variance for longitudinal diffusion was larger than all the other calculated variances (those for the width of the starting zone, Joule heating, sedimentation and the curvature of the capillary). Interestingly, the effect of capillary curvature was significant. In addition, the sum of all other imaginable variances (corresponding to various types of slow on/off kinetics and hyper-sharp peaks) was in the most successful experiments only 28-50% of the variance for longitudinal diffusion. One hundred- to two hundred-fold dilution of the BGE improved the detection limits and provided high precision in both migration times and peak areas with ammonium hydroxyacetate and ammonium acetate as background electrolytes. However, that high dilution increased the variance 140-400% for these buffers, respectively, at least partly due to conductivity or pH differences between the sample and buffer zones (hyper-sharp peaks). Sedimentation of the enriched sample, a factor that has not previously been treated theoretically or experimentally, was probably another reason for our finding that peak heights did not increase when the sample was dissolved in a buffer diluted more than 200-fold, although pH changes and in some cases thermal expansion in the capillary also may contribute. Loss of protein may occur at the ionic strength 0.01 and lower due to precipitation. Limits of detection were in the range 4-17 pmol of proteins with ammonium acetate as BGE. No indication of denaturation of proteins at pH 4 was observed. However, the separation performance at pH 3 was not satisfactory and loss of proteins was observed, possibly indicating such problems. The protein mobilities decreased unexpectedly from pH 4 to 3--a further indication of conformation changes.

Hybrid microdevice electrophoresis of peptides, proteins, DNA, viruses, and bacteria in various separation media, using UV-detection.

Recently we described the design of a hybrid microdevice for micro(nano)electrophoresis and electrochromatography, discussed its advantages and disadvantages compared to conventional microdevices and presented a few applications with low-molecular-weight samples. In this paper, we demonstrate the broad application range of this device using UV-based analyses of (i) peptides by free-zone electrophoresis and electrophoresis in a recently introduced gel (polyacrylamide cross-linked with allyl-beta-cyclodextrin), (ii) proteins by electrophoretic molecular-sieving in a polymer solution supplemented with SDS, (iii) DNA fragments by electrophoresis in the above gel, (iv) virus particles in this gel, as well as in free buffer and (v) bacteria in free buffer. To illustrate the advantages of the hybrid microdevice we can mention that electrophoresis of proteins in a polymer-containing buffer, supplemented with sodium dodecyl sulfate (SDS), in a 4.30 (2.75) cm long channel gave a resolution similar to that in conventional capillary electrophoresis in a 23.5 (18.6) cm long capillary and analysis times which were 15-fold shorter.

A hybrid microdevice for electrophoresis and electrochromatography using UV detection.

We have designed a new class of microdevices composed of a supporting plastic (polyvinyl chloride, PVC) plate integrated with a groove for a piece of fused silica capillary (the separation channel), a slit for on-tube detection, an "islet" for the application of sample, electrode vessels and platinum electrodes. The design permits electrophoretic, electrochromatographic and chromatographic separations with on-tube UV detection. The efficient heat dissipation allows relatively high field strengths. This article is the first one dealing with microdevices where polymer solutions are replaced by homogeneous gels. A new type of gels synthesized from acrylamide and 2-hydroxy-3-allyloxy-propyl-beta-cyclodextrin (allyl-beta-CD) as a cross-linker was employed for electrophoresis and electrochromatography. 2-Acrylamido-2-methylpropanesulfonic acid was added to the monomer solution to create a high electroendosmotic flow in electrochromatographic runs. These gels have excellent electrochromatographic and electrophoretic properties for low-molecular-weight compounds and DNA, as shown previously, namely high resolution combined with high stability. The unique cross-linker can be used for specific interaction with the alkyl and phenyl groups. The tripeptide glutathione (gamma-L-glutamyl-L-cysteinyl-glycine) and its benzyl conjugates were selected as model compounds to study the resolving power of the gel because they are difficult to separate by free zone electrophoresis. The limit of detection (LOD) for S-benzyl-glutathione was determined (ca. 7 microM). Run-by-run reproducibility was high (the separation factor of glutathione in the gel was 0.3 with 2.5% coefficient of variation, CV). Neutral compounds (acetone, acetophenone, propiophenone and butyrophenone) were separated electrochromatographically in the gel. The influence of organic solvent (acetonitrile) on the electroendosmotic mobility was similar to that in reversed-phase separations, although the separation mechanism is different. ATP, ADP and AMP were separated in less than 10 s by free-zone electrophoresis.

Tripeptide interference with human immunodeficiency virus type 1 morphogenesis.

Capsid assembly during virus replication is a potential target for antiviral therapy. The Gag polyprotein is the main structural component of retroviral particles, and in human immunodeficiency virus type 1 (HIV-1), it contains the sequences for the matrix, capsid, nucleocapsid, and several small polypeptides. Here, we report that at a concentration of 100 micro M, 7 of 83 tripeptide amides from the carboxyl-terminal sequence of the HIV-1 capsid protein p24 suppressed HIV-1 replication (>80%). The three most potent tripeptides, glycyl-prolyl-glycine-amide (GPG-NH(2)), alanyl-leucyl-glycine-amide (ALG-NH(2)), and arginyl-glutaminyl-glycine-amide (RQG-NH(2)), were found to interact with p24. With electron microscopy, disarranged core structures of HIV-1 progeny were extensively observed when the cells were treated with GPG-NH(2) and ALG-NH(2). Furthermore, nodular structures of approximately the same size as the broad end of HIV-1 conical capsids were observed at the plasma membranes of treated cells only, possibly indicating an arrest of the budding process. Corresponding tripeptides with nonamidated carboxyl termini were not biologically active and did not interact with p24.

High-resolution capillary zone and gel electrophoresis of structurally similar amphipathic glutathione conjugates based on interaction with beta-cyclodextrins.

The tripeptide glutathione is a prominent intracellular constituent that provides protection against genotoxic and carcinogenic electrophiles and is also a component of several biological signal substances. Glutathione conjugates, free glutathione, and glutathione disulfide contain charged amino acid residues, which contribute to solubility in aqueous media. However, the amphipathic nature of glutathione conjugates and the small differences that may distinguish the S substituents, pose analytical problems in their resolution. The present study demonstrates how homologous S-alkyl and S-benzyl conjugates of high structural similarity can be efficiently resolved by capillary electrophoresis. Inclusion of beta-cyclodextrins in the buffer or in a polyacrylamide gel affords baseline separation of the analytes. The separation methods described are applicable to enzyme assays in vitro and to the identification and quantification of glutathione conjugates of importance in toxicology and physiology. The contribution of beta-cyclodextrin to the separation is primarily based on interactions between its hydrophobic cavity and the S-alkyl and S-benzyl groups of the analytes.