Pasture feeding improves the nutritional, textural and techno-functional characteristics of butter.

There is an increasing consumer desire for pasture-derived dairy products, as outdoor pasture-based feeding systems are perceived as a natural environment for animals. Despite this, the number of grazing animals globally has declined as a result of the higher milk yields achieved by indoor, total mixed ration feeding systems, in addition to the changing climatic conditions and lower grazing knowledge and infrastructure. This has led to the development of pasture-fed standards, stipulating the necessity of pasture and its minimum requirements as the primary feed source for products advertising such claims, with various requirements depending on region for which it was produced. This work investigates the differences in the composition and techno-functional properties of butters produced from high, medium and no pasture allowance diets during early, mid and late lactation. Butters were produced using milks collected from 3 feeding systems: outdoor pasture grazing (GRS; high pasture allowance); indoor total mixed ration (TMR; no pasture allowance); and a partial mixed ration (PMR; medium pasture allowance) system, which involved outdoor pasture grazing during the day and indoor TMR feeding at night. Butters were manufactured during early, mid and late lactation. Creams derived from TMR feeding systems exhibited the highest milk fat globule size. The fatty acid profiles of butters also differed significantly as a function of diet, and could be readily discriminated by partial least squares analysis. The most important fatty acids in such analysis, as indicated by their highest variable importance projection scores, were CLA C18:2 cis-9 trans-11 (rumenic acid), C16:1 n-7 trans (trans-palmitoleic acid), C18:1 trans (elaidic acid), C18:3 n-3 (α-linolenic acid) and C18:2 n-6 (linoleic acid). Increasing pasture allowances resulted in reduced crystallization temperatures and hardness of butters, while concurrently increasing the 'yellow' b* color. Yellow color was strongly correlated with Raman peaks commonly associated with carotenoids. The milk fat globule size of cream decreased with advancing stage of lactation and churning time of cream was lowest in early lactation. Differences in the fatty acid and triglyceride contents of butter as a result of lactation and dietary effects demonstrated significant correlations with the hardness, rheological, melting and crystallization profiles of the butters. This work highlighted the improved nutritional profile and functional properties of butter with increasing dietary pasture allowance, primarily as a result of increasing proportions of unsaturated fatty acids. Biomarkers of pasture feeding (response in milk proportionate to the pasture allowance) associated with the pasture-fed status of butters were also identified as a result of the significant changes in the fatty acid profile with increasing pasture allowance. This was achieved through the use of 3 authentic feeding systems with varying pasture allowances, commonly operated by farmers around the world and conducted across 3 stages of lactation.

Measurement of grass uptake of the urease inhibitor NBPT and of the nitrification inhibitor dicyandiamide co-applied with granular urea.

Grass uptake and phytoaccumulation factors of N-(n-butyl) thiophosphoric triamide (NBPT) and dicyandiamide (DCD) were quantified. Following the application of urea fertilizer treated with the inhibitors in Irish grassland, grass samples were collected at 5, 10, 15, 20, and 30 day time intervals following five application cycles. Uptake of NBPT by grass was below the limit of quantitation of the analytical method (0.010 mg NBPT kg-1). Dicyandiamide concentrations in grass ranged from 0.004 to 28 mg kg-1 with the highest concentrations measured on days 5 and 10. A reducing trend in concentration was found after day 15. The DCD phytoaccumulation factor was ranged from 0.004% to 1.1% showing that DCD can be taken up by grass at low levels when co-applied with granular urea. In contrast, NBPT was not detected indicating that grass uptake is unlikely when co-applied with granular urea fertilizer. The contrasting results are likely due to very different longevity of DCD and NBPT along with the much lower rate of NBPT, which is used compared with DCD.

Confined flow behavior under high shear rates and stability of oil/water high internal phase emulsions (HIPEs) stabilized by whey protein isolate: Role of protein concentration and pH.

High shear rheometry was used to investigate the rheological behavior of high internal phase emulsions (HIPEs) stabilized by whey protein isolate (WPI). The physical stability of HIPEs was tested at extremely high shear rates generated by decreasing the gap height between parallel plates. Viscosity and yield stress, at narrow gaps, increased with protein concentration due to tighter packing of smaller droplets. Structural breakdown and recovery of HIPEs were affected by protein concentration and pH. The hysteresis behavior of HIPEs was either thixotropic or anti-thixotropic and was determined by protein concentration, whereas pH affected the magnitude of anti-thixotropy. At pH 3, emulsions showed greater stability against extreme shear and creaming due to higher deformability of oil droplets and increased interdroplet interaction compared to neutral pH. Challenging the physical integrity of concentrated emulsions under high shear is an effective way to characterize microstructural changes and stability of HIPEs in foods.

Comparative Structural and Compositional Analyses of Cow, Buffalo, Goat and Sheep Cream.

Factors affecting milk and milk fraction composition, such as cream, are poorly understood, with most research and human health application associated with cow cream. In this study, proteomic and lipidomic analyses were performed on cow, goat, sheep and Bubalus bubalis (from now on referred to as buffalo), bulk milk cream samples. Confocal laser scanning microscopy was used to determine the composition, including protein, lipid and their glycoconjugates, and the structure of the milk fat globules. BLAST2GO was used to annotate functional indicators of cream protein. Functional annotation of protein highlighted a broad level of similarity between species. However, investigation of specific biological process terms revealed distinct differences in antigen processing and presentation, activation, and production of molecular mediators of the immune response. Lipid analyses revealed that saturated fatty acids were lowest in sheep cream and similar in the cream of the other species. Palmitic acid was highest in cow and lowest in sheep cream. Cow and sheep milk fat globules were associated with thick patches of protein on the surface, while buffalo and goat milk fat globules were associated with larger areas of aggregated protein and significant surface adsorbed protein, respectively. This study highlights the differences between cow, goat, sheep, and buffalo milk cream, which can be used to support their potential application in functional foods such as infant milk formula.

Development of One-Step Non-Solvent Extraction and Sensitive UHPLC-MS/MS Method for Assessment of N-(n-Butyl) Thiophosphoric Triamide (NBPT) and N-(n-Butyl) Phosphoric Triamide (NBPTo) in Milk.

N-(n-butyl) thiophosphoric triamide (NBPT) is a urease inhibitor utilised in urea-based fertilizers. In Ireland, fertilizer treated with NBPT is applied to pasture to mitigate both ammonia and nitrous oxide emissions, but concerns arise as to the potential for residues in milk products. A quick ultrafiltration extraction and ultra-high performance liquid chromatography coupled with mass spectrometry triple quadrupole (UHPLC-MS/MS) quantitation method was developed and validated in this study. The method was applied in the analysis of samples collected from a field study investigating potential transfer of NBPT residues into milk. NBPT and NBPTo residues, were extracted from fortified milk samples and analysed on a UHPLC-MS/MS with recoveries ranging from 74 to 114%. Validation of the UHPLC-MS/MS method at low (0.0020 mg kg-1) and high (0.0250 mg kg-1) concentration levels in line with SANTE/12682/2019 showed overall trueness in the range of 99 to 104% and precision between 1 and 10%, RSD for both compounds. The limit of quantitation (LOQ) was 0.0020 mg kg-1 and other tested parameters (linearity, sensitivity, specificity, matrix effect, robustness, etc.) satisfied acceptance criteria. Stability assessment using spiked samples revealed the compounds were stable in raw and pasteurised milk for 4 weeks at -80 °C storage temperature. Maintaining samples at pH 8.5-9.0 further improved stability. Analysis of 516 milk samples from the field study found that NBPT and NBPTo concentrations were below the LOQ of 0.0020 mg kg-1, thus suggesting very low risk of residues occurring in the milk. The method developed is quick, robust, and sensitive. The method is deemed fit-for-purpose for the simultaneous determination of NBPT and NBPTo in milk.

Characterization and gelling properties of a bioactive extract from Ascophyllum nodosum obtained using a chemical-free approach.

The bioactivity and gelling properties of a carbohydrate-rich algal extract obtained from locally harvested Ascophyllum nodosum seaweed using a chemical-free approach were investigated for its potential interest in food applications. Physicochemical characterisation and compositional analysis of the extract, using FTIR, biochemical methods and monosaccharide analysis, confirmed the presence of alginates and fucoidans, although the main polysaccharide present in it was laminarin. Significant amounts of phenolic compounds (~9 â€‹mg phloroglucinol/100 â€‹mg sample) were also detected. As a result, the extract exhibited good antioxidant activity. It also showed promising prebiotic potential, promoting the growth of beneficial Lactobacillus sp. and Bifidobacteria sp. when compared with commercial prebiotics, but not that of pathogenic bacteria such as E. coli or P. aeruginosa. The gelling properties of the raw extract were explored to optimize hydrogel bead formation by external gelation in CaCl2 solutions. This was enhanced at neutral to alkaline pHs and high extract and CaCl2 concentrations. The mechanical strength, nano- and microstructure of the hydrogel beads prepared under optimised conditions were determined using compression tests, synchrotron small- and wide-angle X-ray scattering (SAXS/WAXS) and scanning electron microscopy (SEM). It was concluded that the raw algal extract at neutral pH had potential for use as a gelling agent, although further enrichment with alginate improved the mechanical properties of the obtained gels. The advantages and disadvantages of applying the non-purified algal extract in comparison with purified carbohydrates are discussed.

Rheological and Solubility Properties of Soy Protein Isolate.

Soy protein isolate (SPI) powders often have poor water solubility, particularly at pH values close to neutral, which is an attribute that is an issue for its incorporation into complex nutritional systems. Therefore, the objective of this study was to improve SPI solubility while maintaining low viscosity. Thus, the intention was to examine the solubility and rheological properties of a commercial SPI powder at pH values of 2.0, 6.9, and 9.0, and determine if heat treatment at acidic or alkaline conditions might positively influence protein solubility, once re-adjusted back to pH 6.9. Adjusting the pH of SPI dispersions from pH 6.9 to 2.0 or 9.0 led to an increase in protein solubility with a concomitant increase in viscosity at 20 °C. Meanwhile, heat treatment at 90 °C significantly improved the solubility at all pH values and resulted in a decrease in viscosity in samples heated at pH 9.0. All SPI dispersions measured under low-amplitude rheological conditions showed elastic-like behaviour (i.e., G' > G″), indicating a weak "gel-like" structure at frequencies less than 10 Hz. In summary, the physical properties of SPI can be manipulated through heat treatment under acidic or alkaline conditions when the protein subunits are dissociated, before re-adjusting to pH 6.9.

Interfacial properties of milk proteins: A review.

The interfacial properties of dairy proteins are of great interest to the food industry. Food manufacturing involves various environmental conditions and multiple processes that significantly alter the structure and colloidal stability of food materials. The effects of concentration, pH, heat treatment, addition of salts etc., have considerable influence on the surface activity of proteins and the mechanical properties of the interfacial protein films. Studies to date have established some understanding of the links between environmental and processing related parameters and their impacts on interfacial behavior. Improvement in knowledge may allow better design of interfacial protein structures for different food applications. This review examines the effects of environmental and processing conditions on the interfacial properties of dairy proteins with emphasis on interfacial tension dynamics, dilatational and surface shear rheological properties. The most commonly used surface analytical techniques along with relevant methods are also addressed.

Milk fat: opportunities, challenges and innovation.

Milk fat is a high-value milk component that is processed mainly as butter, cheese, cream and whole milk powder. It is projected that approximately 35 million tonnes of milk fat will be produced globally by 2025. This surplus, enhances the need for diversification of milk fat products and the milk pool in general. Infant milk formula producers, for instance, have incorporated enzyme modified ("humanised") milk fat and fat globule phospholipids to better mimic human milk fat structures. Minor components like mono- and di-glycerides from milk fat are increasingly utilized as emulsifiers, replacing palm esters in premium-priced food products. This review examines the chemistry of milk fat and the technologies employed for its modification, fractionation and enrichment. Emerging processing technologies such as ultrasound, high pressure processing, supercritical fluid extraction and fractionation, can be employed to improve the nutritional and functional attributes of milk fat. The potential of recent developments in biological intervention, through dietary manipulation of milk fatty acid profiles in cattle also offers significant promise. Finally, this review provides evidence to help redress the imbalance in reported associations between milk fat consumption and human health, and elucidates the health benefits associated with consumption of milk fat and dairy products.

Dynamic Mechanical Analysis as a Complementary Technique for Stickiness Determination in Model Whey Protein Powders.

The α-relaxation temperatures (Tα), derived from the storage and loss moduli using dynamic mechanical analysis (DMA), were compared to methods for stickiness and glass transition determination for a selection of model whey protein concentrate (WPC) powders with varying protein contents. Glass transition temperatures (Tg) were determined using differential scanning calorimetry (DSC), and stickiness behavior was characterized using a fluidization technique. For the lower protein powders (WPC 20 and 35), the mechanical Tα determined from the storage modulus of the DMA (Tα onset) were in good agreement with the fluidization results, whereas for higher protein powders (WPC 50 and 65), the fluidization results compared better to the loss modulus results of the DMA (Tα peak). This study demonstrates that DMA has the potential to be a useful technique to complement stickiness characterization of dairy powders by providing an increased understanding of the mechanisms of stickiness.

Water sorption and hydration in spray-dried milk protein powders: Selected physicochemical properties.

Low and high protein dairy powders are prone to caking and sticking and can also be highly insoluble; with powder storage conditions an important factor responsible for such issues. The aim of this study focused on the bulk and surface properties of anhydrous and humidified spray-dried milk protein concentrate (MPC) powders (protein content ~40, 50, 60, 70 or 80%, w/w). Water sorption isotherms, polarized light and scanning electron micrographs showed crystallized lactose in low protein powders at high water activities. High protein systems demonstrated increased bulk diffusion coefficients compared to low protein systems. Glass transition temperatures, α-relaxation temperatures and structural strength significantly decreased with water uptake. CLSM measurements showed that humidified systems have slower real time water diffusion compared to anhydrous systems. Overall, the rate of water diffusion was higher for low protein powders but high protein powders absorbed higher levels of water under high humidity conditions.

The "Grass-Fed" Milk Story: Understanding the Impact of Pasture Feeding on the Composition and Quality of Bovine Milk.

Milk is a highly nutritious food that contains an array of macro and micro components, scientifically proven to be beneficial to human health. While the composition of milk is influenced by a variety of factors, such as genetics, health, lactation stage etc., the animal's diet remains a key mechanism by which its nutrition and processing characteristics can be altered. Pasture feeding has been demonstrated to have a positive impact on the nutrient profile of milk, increasing the content of some beneficial nutrients such as Omega-3 polyunsaturated fatty acids, vaccenic acid, and conjugated linoleic acid (CLA), while reducing the levels of Omega-6 fatty acids and palmitic acid. These resultant alterations to the nutritional profile of "Grass-Fed" milk resonate with consumers that desire healthy, "natural", and sustainable dairy products. This review provides a comprehensive comparison of the impact that pasture and non-pasture feeding systems have on bovine milk composition from a nutritional and functional (processability) perspective, highlighting factors that will be of interest to dairy farmers, processors, and consumers.

Nano- and microstructural evolution of alginate beads in simulated gastrointestinal fluids. Impact of M/G ratio, molecular weight and pH.

Alginate microcapsules were prepared using three different alginate grades and incubated under simulated digestion conditions. Their micro- and nanostructural changes were studied using microscopy, laser diffraction and small angle X-ray scattering. Both the molecular weight and M/G ratio affected the size and nanostructural features of the capsules, but the changes in gastrointestinal conditions were mainly determined by the latter. All microcapsules swelled slightly in simulated gastric fluid (pH = 3) and swelled further in simulated intestinal fluid (pH = 7), particularly those with high mannuronic acid (M) contents. While high guluronic acid (G) beads maintained the nanostructural features characteristic of alginate gels (junction zones) in both media, these were rapidly disrupted in the M-rich capsules. Decreasing the pH of the gastric phase from 3 to 2 had dramatic structural impacts, resulting in a greater integrity of the microcapsules, thus highlighting the importance of the selected digestion protocol for rational microcapsule design.

Influence of Supplemental Feed Choice for Pasture-Based Cows on the Fatty Acid and Volatile Profile of Milk.

The purpose of this study was to examine the impact of a variety of supplemental feeds on the composition and quality of milk in a pasture-based dairy system. Four pasture-supplemented feeding systems were compared: Group 1 supplementation with 16% crude protein parlour concentrate (CONC); Group 2 supplementation with palm kernel expeller plus parlour concentrate (PKE); Group 3 supplemented with soya hulls plus parlour concentrate (SOYA); Group 4 was supplemented with molassed beet pulp plus parlour concentrate (BEET). Supplemental feeding system was demonstrated to have a significant effect on the size of native casein micelles and the gelation properties of milks. While CONC feeding produced significantly higher casein micelle size, gel strength (Young's Modulus) was significantly negatively correlated with casein micelle size. Supplemental feeding system had a significant effect on a number of fatty acids (FA) and indices derived therefrom, including total saturated and unsaturated fatty acids, de novo produced FA, omega 3, and omega 6 FA. The volatile profile of milks was also affected by supplemental feed choice, whereby multivariate analysis demonstrated that the CONC diet was distinctly different to that of the PALM, SOYA, and BEET milks. Multivariate analysis demonstrated that it is possible to distinguish milks from different pasture-supplemented feeding systems by their FA profile.

Pilot-scale formation of whey protein aggregates determine the stability of heat-treated whey protein solutions-Effect of pH and protein concentration.

Denaturation and consequent aggregation in whey protein solutions is critical to product functionality during processing. Solutions of whey protein isolate (WPI) prepared at 1, 4, 8, and 12% (wt/wt) and pH 6.2, 6.7, or 7.2 were subjected to heat treatment (85°C × 30 s) using a pilot-scale heat exchanger. The effects of heat treatment on whey protein denaturation and aggregation were determined by chromatography, particle size, turbidity, and rheological analyses. The influence of pH and WPI concentration during heat treatment on the thermal stability of the resulting dispersions was also investigated. Whey protein isolate solutions heated at pH 6.2 were more extensively denatured, had a greater proportion of insoluble aggregates, higher particle size and turbidity, and were significantly less heat-stable than equivalent samples prepared at pH 6.7 and 7.2. The effects of WPI concentration on denaturation/aggregation behavior were more apparent at higher pH where the stabilizing effects of charge repulsion became increasingly influential. Solutions containing 12% (wt/wt) WPI had significantly higher apparent viscosities, at each pH, compared with lower protein concentrations, with solutions prepared at pH 6.2 forming a gel. Smaller average particle size and a higher proportion of soluble aggregates in WPI solutions, pre-heated at pH 6.7 and 7.2, resulted in improved thermal stability on subsequent heating. Higher pH during secondary heating also increased thermal stability. This study offers insight into the interactive effects of pH and whey protein concentration during pilot-scale processing and demonstrates how protein functionality can be controlled through manipulation of these factors.

Relationships between surface energy analysis and functional characteristics of dairy powders.

Surface energetics of demineralised whey (DMW), skimmed milk (SMP), phosphocasein (PCN) and infant milk formula (IMF) powders were determined by inverse gas chromatography (IGC). All four milk powders were amphoteric in nature with the dispersive (apolar) component of surface energy dominating the specific (polar) contribution. PCN and IMF had the highest and lowest extent of surface heterogeneity, respectively. PCN also demonstrated the poorest functional properties of the powders examined. In contrast, IMF had excellent flow and rehydration properties. Thermodynamic work of cohesion was highest in PCN and may have contributed to inadequate rehydration behaviour. Glass transition temperature of IMF powder, determined by IGC, suggested a surface dominated by lactose. Surface heterogeneity provided a better indicator of functional behaviour than total surface energy. IGC is a useful complementary technique for chemical and structural analysis of milk powders and allows improved insight into the contribution of surface and bulk factors to functionality.

Emulsification properties of pea protein isolate using homogenization, microfluidization and ultrasonication.

Pea protein isolate (PPI) is used in many food formulations, due to its low cost, commercial availability and excellent amino acid profile. The objective of this study was to determine the emulsification properties of PPI. Particle size of PPI powders showed neither temperature (25-65°C) nor time (up to 24h) increased solubilisation of powder particles during mixing. Heating PPI dispersions (10%, w/w, protein) from 45 to 90°C led to an increase in storage modulus (G'; Pa) at 71°C, indicating the onset of protein aggregation. Gel formation occurred at 79°C (G'>1Pa). Pea protein-stabilised emulsions made using homogenization (15MPa; 1 pass) or microfluidization (50MPa; 1 pass) resulted in the formation of cold-set gels, with gel strength increasing with increasing oil concentration and fluidic pressure. Droplet size and viscosity of pea protein-stabilised emulsions decreased and increased, respectively, with increasing ultrasonication time. Overall, ultrasonication (<50°C) can create a uniform droplet size emulsion, while, homogenization and microfluidization can produce cold-set gels for use in a wide-range of food applications.

Decoupling macronutrient interactions during heating of model infant milk formulas.

Understanding macronutrient interactions during heating is important for controlling viscosity during infant milk formula (IMF) manufacture. Thermal behavior of macronutrients (casein, whey, lactose, fat) was studied, in isolation and combination, over a range of concentrations. Addition of phosphocasein to whey protein solutions elevated denaturation temperature (Td) of ß-lactoglobulin and the temperature at which viscosity started to increase upon heating (Tv). Secondary structural changes in whey proteins occurred at higher temperatures in dispersions containing phosphocasein; the final extent of viscosity increase was similar to that of whey protein alone. Addition of lactose to whey protein solutions delayed secondary structural changes, increased Td and Tv, and reduced post heat treatment viscosity. This study demonstrated that heat-induced changes in IMF associated with whey protein (denaturation, viscosity) are not only a function of concentration but are also dependent on interactions between macronutrients.

Synthesis, isolation and characterisation of beta-sitosterol and beta-sitosterol oxide derivatives.

Beta-sitosterol is the most prevalent plant cholesterol derivative (phytosterol) and can undergo similar oxidation to cholesterol, leading to beta-sitosterol oxides. The biological impact of phytosterol oxides has only been evaluated in a phytosterol blend (usually of beta-sitosterol, campesterol, stigmasterol and dihydrobrassicasterol). The lack of pure phytosterols, including beta-sitosterol, hinders the collection of significant toxicity data on the individual beta-sitosterol oxides. An efficient synthetic route to multi-gram quantities of pure beta-sitosterol is described here, together with the first syntheses and characterisation of pure beta-sitosterol oxides.