Dredged sediments as a plant-growing substrate: Estimation of health risk index.

Dredging of sediments is conducted worldwide to maintain harbours and water bodies. As a result, large amounts of materials generated require proper management and could have useful applications in a circular economy context. The current use of peat as organic material in cultivating plants requires urgent replacement by more sustainable alternatives. In this context, using nutrient-rich sediments generated by dredging could be an attractive option. However, due to contaminants in dredged sediments, more investigations are required. The present study investigated the potential to employ dredged material as a plant-growing substrate to cultivate lettuce (Lactuca sativa). The study employed compost and dredged sediments from Malmfjärden Bay, Sweden, with low and high nutritional content (LN and HN, respectively), with and without polymer (PO) used for dewatering. The tests were carried out under controlled conditions in a greenhouse, and the studied substrates were (% vol): (1) 100 % sediment (100SHN); (2) 50 % sediment +50 % compost (50SLN-50C); (3) 70 % sediment +30 % compost (70SLN-30C); (4) 50 % polymer sediment +50 % compost (50SPO-50C); and (5) 100 % compost (100C). Fertilisers were added to 50SLN-50C and 70SLN-30C during the experiment. Lettuces with the highest weight were harvested from substrates 100C, 50SPO-50C and 50SLN-50C. However, the lettuces only reached a weight of 18.57 ± 4.67 g. The results showed that a main limitation of the growth was probably a lack of aeration of the sediments during sampling and development of the experiment. The low aeration possibly caused a lack of available forms of N in the substrates, hindering the growth. Lettuces harvested from substrates containing sediments presented Cd concentrations slightly overpassing the Swedish thresholds, and the health risk index was marginally exceeding 1. Hence, sediments need to be pre-treated before using them to cultivate edible crops, or they could be employed to cultivate ornamental or bioenergy plants.

Safety at waste and recycling industry: Detection and mitigation of waste fire accidents.

In this study, NASA's VIIRS (Visible Infrared Imaging Radiometer Suite) fire hotspots and data of the Swedish Civil Contingencies Agency (MSB), collected between 2012 and 2018, was integrated to characterize waste fire incidents that were detected by VIIRS and reported to MSB (DaR), detected by VIIRS but not reported to MSB (DbNR) and that are reported to MSB but not detected by VIIRS (RbND). Results show that the average number of open waste fire incidents per million capita per year (AFIPMC) in Sweden, for the period 2012-2018, ranges from 2.4 to 4.7. Although a weak correlation exists (r = 0.44, P = 0.1563, one tailed) between years and number of fire incidents (MSB + VIIRS fires), a continuous increase in number of fire incidents was recorded between 2014 and 2018. It is concluded that the use of satellite data of fire anomalies, in-combination with the use of incident reports, will help in formalizing more reliable and comprehensive waste fire statistics. Another focus area of the article is to consolidate the recommendations and routines for safe storage of waste and biofuels and to present the lessons that can be learnt from past fire incidents. The article also discusses the technical, political, economic, social, and practical aspects of waste fires and provide a baseline for future research and experimentation.

An overview and assessment of the existing technological options for management and resource recovery from beach wrack and dredged sediments: An environmental and economic perspective.

The present work discusses the problems and management options of beach wrack and dredged sediments. Beach wrack and dredged sediments near the shores have affected the coastal ecosystem, badly. The piles of beach wrack residues might be a significant emitter of greenhouse gases (GHGs) and dredged sediment is a substantial source of heavy metals and other pollutants. The recovery of valuable resources such as metals and nutrients from these so-called "wastes" is a sustainable strategy to enhance the resilience of the coastal ecosystem and management. The beach wrack meadows can be a potential source for green energy production. Even the demand for biodegradable polymers can be supplied by utilizing the waste beach wracks. The residues of beach wrack species like Posidonia oceanica, Zostera marina, Ulva spc. and Enhalus acorodies can be very beneficial species in terms of economic growth. Red algae have been the most favored and efficient candidate for methane yield. In case of dredged sediment, dewatering of sediment is an essential step for successful resource extraction. Although, extraction methods are almost similar to that applied for soil treatment, which includes pretreatment, physical partitioning, washing, thermal treatment, biological extraction, and immobilization. The fractionation study can be a beneficial tool for determining the metal species present in the sediment. Immobilization techniques are successful but continuous monitoring is required. The vitrification technique is highly effective but very expensive. Thermal treatment is useful for volatile metals such as mercury (Hg), but costs are high. Biological extractions are comparatively cheap but time-consuming. Henceforth, very few extraction methods are available for sediment and required further advancement in this field.

Chemical speciation of metals from marine sediments: Assessment of potential pollution risk while dredging, a case study in southern Sweden.

Contamination associated with metals is a critical concern related to their toxicity, persistence, and bio-accumulation. Trace elements are partitioned into several chemical forms, which some are more labile during fluctuations in the environment. Studying the distribution of metals between the different chemical fractions contributes to assess their bioavailability and to identify their potential risk of contamination to surrounding environments. This study concerns the speciation of metals (Pb, Cr, Ni, Zn and Fe) from sediments coming out from Malmfjärden bay, Sweden. The aim was to assess the potential risk of metal pollution during present and future dredging as well as while using dredged sediments in beneficial uses. The Tessier speciation procedure was chosen, and the results showed that low concentrations of metals were associated with the exchangeable fraction. In contrast, the major concentrations were linked to the residual part. The risk indexes (contamination factor and risk assessment code) showed that, during dredging activities, there is a low concern of pollution for Cr, Ni and Fe and a medium risk for Pb and Zn. Additionally, in all elements, the sum of non-residual concentrations was below the Swedish limits for using dredged sediments in sensitive lands. The findings suggested that the investigated metals in Malmfjärden sediments are related to low risks of spreading during using in beneficial uses.

Geophysical investigation of glass 'hotspots' in glass dumps as potential secondary raw material sources.

This study investigates the potential for Electrical Resistivity Tomography (ERT) to detect buried glass 'hotspots' in a glass waste dump based on results from an open glass dump investigated initially. This detection potential is vital for excavation and later use of buried materials as secondary resources. After ERT, test pits (TPs) were excavated around suspected glass hotspots and physico-chemical characterisation of the materials was done. Hotspots were successfully identified as regions of high resistivity (>8000 Ωm) and were thus confirmed by TPs which indicated mean glass composition of 87.2% among samples (up to 99% in some). However, high discrepancies in material resistivities increased the risk for introduction of artefacts, thus increasing the degree of uncertainty with depth, whereas similarities in resistivity between granite bedrock and crystal glass presented data misinterpretation risks. Nevertheless, suitable survey design, careful field procedures and caution exercised by basing data interpretations primarily on TP excavation observations generated good results particularly for near-surface materials, which is useful since glass waste dumps are inherently shallow. Thus, ERT could be a useful technique for obtaining more homogeneous excavated glass and other materials for use as secondary resources in metal extraction and other waste recycling techniques while eliminating complicated and often costly waste sorting needs.

Radiometrical and physico-chemical characterisation of contaminated glass waste from a glass dump in Sweden.

Around former glass factories in south eastern Sweden, there are dozens of dumps whose radioactivity and physico-chemical properties were not investigated previously. Thus, radiometric and physico-chemical characteristics of waste at Madesjö glass dump were studied to evaluate pre-recycling storage requirements and potential radiological and environmental risks. The material was sieved, hand-sorted, leached and scanned with X-Ray Fluorescence (XRF). External dose rates and activity concentrations of Naturally Occurring Radioactive Materials from 238U, 232Th series and 40K were also measured coupled with a radiological risk assessment. Results showed that the waste was 95% glass and dominated by fine fractions (<11.3 mm) at 43.6%. The fine fraction had pH 7.8, 2.6% moisture content, 123 mg kg-1 Total Dissolved Solids, 37.2 mg kg-1 Dissolved Organic Carbon and 10.5 mg kg-1 fluorides. Compared with Swedish EPA guidelines, the elements As, Cd, Pb and Zn were in hazardous concentrations while Pb leached more than the limits for inert and non-hazardous wastes. With 40K activity concentration up to 3000 Bq kg-1, enhanced external dose rates of 40K were established (0.20 µSv h-1) although no radiological risk was found since both External Hazard Index (Hex) and Gamma Index (Iγ) were <1. The glass dump needs remediation and storage of the waste materials under a safe hazardous waste class 'Bank Account' storage cell as a secondary resource for potential future recycling.

Physicochemical and toxicological characterization of hazardous wastes from an old glasswork dump at southeastern part of Sweden.

More than 34 old glasswork sites in the southeastern part of Sweden pose a permanent threat to human and environmental health due to the presence of toxic trace elements in open dumps with glass waste. The possibility of leaching of trace elements from different fractions of the disposed waste needed to be assessed. In the present investigation, leachate from a mixture of soil and waste glass of particle sizes of less than 2 mm (given the name fine fraction) was characterized by analyzing the pH (7.3), total organic content (TOC < 2%), organic matter content (4.4%), moisture content (9.7%), chemical oxygen demand (COD, 163 mg/kg) and trace elements content, being the values in accordance to the Swedish guidelines for landfilling of inert materials. However, very high trace elements content was found in the fine fraction as well as in all colors of waste glass, whose values were compatible to hazardous waste landfill class. Tests with Lepidium sativum growing in the fine fraction as substrate revealed chronic toxicity expressed as inhibition of root biomass growth in 11 out of 15 samples. Additionally, leachate from fine fractions posed acute toxicity to genetically modified E. coli (Toxi-Chromotest). This study highlights the importance of combining physicochemical characterization with toxicity tests for both solid waste and leachate obtained from different waste fractions for proper hazardousness assessment supporting decision making on remediation demands.

Chemical extraction of trace elements from hazardous fine fraction at an old glasswork dump.

Old glassworks sites have been always associated with contamination by different trace elements like Pb, Cd, As, Zn and others. The mixture of soil and waste glass of particle sizes <2 mm at one of the oldest Swedish glassworks (the Pukeberg) was studied by analyzing the trace elements content, organic content (3.6%) and pH (7.4). The results showed hazardous concentrations of Pb (1525 mg/kg), Ba (1312 mg/kg), Sb (128 mg/kg), Cd (36 mg/kg), As (118 mg/kg), Zn (1154 mg/kg) and Co (263 mg/kg) exceeded the Swedish guidelines of contaminated soil. Batch chemical extraction by the chelating agents EDTA, DTPA and the biodegradable NTA were performed to study the effect of chelating agent concentration and mixing time on the extraction efficiencies by following a Box-Wilson design of experiments. The results displayed good extraction efficiencies (less than 41%) of Pb, Cd, As and Zn by the EDTA, DTPA and NTA, which seemed depends on the type of chelator. In addition, high correlation between the extraction efficiencies, the chelators concentration and mixing time was found based on the statistical and experimental results.

Pilot scale aided-phytoremediation of a co-contaminated soil.

A pilot scale experiment was conducted to investigate the aided-phytoextraction of metals and the aided-phytodegradation of petroleum hydrocarbons (PHC) in a co-contaminated soil. First, this soil was amended with compost (10% w/w) and assembled into piles (Unp-10%C). Then, a phyto-cap of Medicago sativa L. either in monoculture (MS-10%C) or co-cropped with Helianthus annuus L. as companion planting (MSHA-10%C) was sown on the topsoil. Physico-chemical parameters and contaminants in the soil and its leachates were measured at the beginning and the end of the first growth season (after five months). In parallel, residual soil ecotoxicity was assessed using the plant species Lepidium sativum L. and the earthworm Eisenia fetida Savigny, 1826, while the leachate ecotoxicity was assessed using Lemna minor L. After 5months, PH C10-C40, PAH-L, PAH-M PAH-H, Pb and Cu concentrations in the MS-10%C soil were significantly reduced as compared to the Unp-10%C soil. Metal uptake by alfalfa was low but their translocation to shoots was high for Mn, Cr, Co and Zn (transfer factor (TF) >1), except for Cu and Pb. Alfalfa in monoculture reduced electrical conductivity, total organic C and Cu concentration in the leachate while pH and dissolved oxygen increased. Alfalfa co-planting with sunflower did not affect the extraction of inorganic contaminants from the soil, the PAH (M and H) degradation and was less efficient for PH C10-C40 and PAH-L as compared to alfalfa monoculture. The co-planting reduced shoot and root Pb concentrations. The residual soil ecotoxicity after 5months showed a positive effect of co-planting on L. sativum shoot dry weight (DW) yield. However, high contaminant concentrations in soil and leachate still inhibited the L. sativum root DW yield, earthworm development, and L. minor growth rate.

Fractionation of Pb and Cu in the fine fraction (<10 mm) of waste excavated from a municipal landfill.

The fractionation of metals in the fine fraction (<10 mm) of excavated waste from an Estonian landfill was carried out to evaluate the metal (Pb and Cu) contents and their potential towards not only mobility but also possibilities of recovery/extraction. The fractionation followed the BCR (Community Bureau of Reference) sequential extraction, and the exchangeable (F1), reducible (F2), oxidizable (F3) and residual fractions were determined. The results showed that Pb was highly associated with the reducible (F2) and oxidizable (F3) fractions, suggesting the potential mobility of this metal mainly when in contact with oxygen, despite the low association with the exchangeable fraction (F1). Cu has also shown the potential for mobility when in contact with oxygen, since high associations with the oxidizable fraction (F3) were observed. On the other hand, the mobility of metals in excavated waste can be seen as beneficial considering the circular economy and recovery of such valuables back into the economy. To conclude, not only the total concentration of metals but also a better understanding of fractionation and in which form metals are bound is very important to bring information on how to manage the fine fraction from excavated waste both in terms of environmental impacts and also recovery of such valuables in the economy.

Reduction-melting extraction of trace elements from hazardous waste glass from an old glasswork's dump in the southeastern part of Sweden.

At the southeastern part of Sweden, old art and crystal waste glass has been identified as a hazardous waste due to high weight concentrations of Pb (32.398%), Cd (0.085%), and As (1.976%). The reduction-melting technique was used to investigate the extraction of these trace elements from powder waste glass of particle size < 1 mm. Following a factorial design technique, the experimental results of the reduction-melting method showed that 99.9% of Pb, 100% of Cd, and 99% of As could be extracted. For a batch of 10 g powder waste glass, the found experimental and theoretical optimum operating conditions were 1100 °C of melting temperature, 5 g of Na2CO3, 2 g of carbon, and 120 min of melting time. The reduction-melting method displayed promising results which might help in recycling the extracted trace elements and glass compared to the current used solution of landfilling as hazardous wastes.

Hunting for valuables from landfills and assessing their market opportunities A case study with Kudjape landfill in Estonia.

Landfill mining is an alternative technology that merges the ideas of material recycling and sustainable waste management. This paper reports a case study to estimate the value of landfilled materials and their respective market opportunities, based on a full-scale landfill mining project in Estonia. During the project, a dump site (Kudjape, Estonia) was excavated with the main objectives of extracting soil-like final cover material with the function of methane degradation. In total, about 57,777 m3 of waste was processed, particularly the uppermost 10-year layer of waste. Manual sorting was performed in four test pits to determine the detailed composition of wastes. 11,610 kg of waste was screened on site, resulting in fine (<40 mm) and coarse (>40 mm) fractions with the share of 54% and 46%, respectively. Some portion of the fine fraction was sieved further to obtain a very fine grained fraction of <10 mm and analyzed for its potential for metals recovery. The average chemical composition of the <10 mm soil-like fraction suggests that it offers opportunities for metal (Cr, Cu, Ni, Pb, and Zn) extraction and recovery. The findings from this study highlight the importance of implementing best available site-specific technologies for on-site separation up to 10 mm grain size, and the importance of developing and implementing innovative extraction methods for materials recovery from soil-like fractions.

Characterisation of excavated fine fraction and waste composition from a Swedish landfill.

The present research studies the characterisation and the physico-chemical properties of an excavated fine fraction (<10 mm) from a Swedish landfill, the Högbytorp. The results showed that the fine fraction represents 38% by mass of the total excavated wastes and it contains mainly soil-type materials and minerals. Higher concentrations of zinc, copper, barium and chromium were found with concentrations higher than the Swedish Environmental Protection Agency (EPA) for contaminated soil. The found moisture and organic contents of the fine fraction were 23.5% and 16.6%, respectively. The analysed calorific value (1.7 MJ kg-1), the potential of CH4 (4.74 m3 t-1 dry matter) and Total Organic Carbon (TOC) (5.6%) were low and offer low potential of energy. Sieving the fine fraction further showed that 80% was smaller than 2 mm. The fine represents a major fraction at any landfill (40%-70%), therefore, characterising the properties of this fraction is essential to find the potential of reusing/recycling or safely redisposing.

Effect of Medicago sativa L. and compost on organic and inorganic pollutant removal from a mixed contaminated soil and risk assessment using ecotoxicological tests.

Several Gentle Remediation Options (GRO), e.g., plant-based options (phytoremediation), singly and combined with soil amendments, can be simultaneously efficient for degrading organic pollutants and either stabilizing or extracting trace elements (TEs). Here, a 5-month greenhouse trial was performed to test the efficiency of Medicago sativa L., singly and combined with a compost addition (30% w/w), to treat soils contaminated by petroleum hydrocarbons (PHC), Co and Pb collected at an auto scrap yard. After 5 months, total soil Pb significantly decreased in the compost-amended soil planted with M. sativa, but not total soil Co. Compost incorporation into the soil promoted PHC degradation, M. sativa growth and survival, and shoot Pb concentrations [3.8 mg kg(-1) dry weight (DW)]. Residual risk assessment after the phytoremediation trial showed a positive effect of compost amendment on plant growth and earthworm development. The O2 uptake by soil microorganisms was lower in the compost-amended soil, suggesting a decrease in microbial activity. This study underlined the benefits of the phytoremediation option based on M. sativa cultivation and compost amendment for remediating PHC- and Pb-contaminated soils.

Photo-Fenton and Fenton Oxidation of Recalcitrant Wastewater from the Wooden Floor Industry.

There is a need for development of on-site wastewater treatment technologies suitable to "dry-process" industries, such as the wooden floor sector. Due to the nature of their activities, these industries generate low volumes of highly polluted and recalcitrant wastewaters due to washing and cleaning surfaces and machinery. Advanced oxidation processes such as Fenton and photo-Fenton are potentially feasible options for the treatment of wastewaters with not easily biodegradable pollutants. The wastewater from a wooden floor industry with initial COD value of 4956 mg/L and TOC value of 2730 mg/L was treated with Fenton (Fe/H2O2) and photo-Fenton (Fe/H2O2/UV) applying a 2-level full-factorial experimental design. The highest removals of COD and TOC (79% and 62% respectively) were achieved when photo-Fenton was applied. In conclusion, Fenton and photo-Fenton are promising treatment options for these highly recalcitrant wastewaters, photo-Fenton being a more promising option according to the results.

Removal of organic pollutants from oak leachate in pilot scale wetland systems: How efficient are aeration and vegetation treatments?

This study investigated the effects of aeration and/or vegetation in experimental constructed wetlands (CWs) as mesocosms on the removal of pollutants in oak wood leachate. Twelve outdoor wetland mesocosms, with randomized replicated treatment combinations of vegetation (Phragmites australis) and aeration was monitored during the second and third year after construction. The investigation included control tanks with no aeration and no vegetation. The parameters monitored were polyphenols (PPs), chemical oxygen demand (COD) and water colour. The reduction of COD after 28 days was approx. 50% and more than 50% of PPs, whereas only 40% of the water colour was removed. Aeration increased the effect of both COD and PP removal. The vegetation treatment had a small but significant effect on removal of COD. The vegetation + aeration treatment, as well as aeration alone, increased the removal efficiency of COD from 9.5 g m(-3) d(-1) in the control to 11 g m(-3) d(-1). The results suggest that CWs can be used to treat stormwater contaminated by oak wood leachate. Further, it is suggested that the main processes for removal of pollutants in the leachate occur in the open-water habitat and that the hydraulic retention time is more important for removal than aeration and vegetation related processes.

Significance of environmental dredging on metal mobility from contaminated sediments in the Oskarshamn Harbor, Sweden.

Metals are often seen as immobile in bottom sediments as long as these environmental sinks remain undisturbed. The aim of this paper was to evaluate the potential metal mobility due to resuspension under pseudo-dredging conditions of contaminated sediments in the Oskarshamn Harbor that are likely to be dredged as part of a remediation program established in Sweden. To address this concern, mixtures of water slurries were sampled from pore, leaching, and surface water over a period of nearly 36 d, and the major ions and trace metal concentrations determined. The results of this study pointed out the potential mobility and toxicity of metals posed by temporary changes during dredging operations, and highlighted the potential release of Cu, Pb, Zn, Mn, and Ni to the environment. Among the toxic metals, regarding pre and post dredging, Cu and Pb significantly demonstrated to be in ionic form, apparently because of dissolution of Fe-Mn oxy/hydroxides and decomposition of organic matter.

Particle size characterization of oak wood leachate: chemical oxygen demand and toxicity distribution within different fractions.

Oak wood leachate obtained from two storage facilities (storage pound and ditch) in a wood-based industry, and leachate generated by a laboratory leaching test, were characterized in seven categories regarding particle size distribution (PSD) (raw leachate, ≤ 20 µm, ≤ 10 µm, ≤ 1.2 µm, ≤ 13 nm, ≤ 5 nm and ≤ 2 nm). The PSD followed a normal distribution model with a correlation coefficient (r) varying from 82 to 88. Each fraction was analysed regarding chemical oxygen demand, polyphenols and acute toxicity in toxicity assays with Artemia salina, Vibrio fischeri and Lactuca sativa. Fractions with particles >1.2 µm were more toxic to A. salina and V. fisheri than fractions with particles ≤ 1.2 µm. No toxic effect was observed for L. sativa. The results suggest that polyphenols are the main toxic compounds in oak wood leachate. A conspicuous difference was found between field and laboratory samples.

Effects of single and mixed estrogens on single and combined cultures of D. subspicatus and P. subcapitata.

This paper investigates the effect of estrone (E1), 17ß-estradiol (E2) and 17α-ethinylestradiol (EE2) individually and mixed at equal proportions (1:1:1) on Desmodesmus subspicatus and Pseudokirchneriella subcapitata in single and combined cultures (S+) at different exposure times based on algal growth (in vivo chlorophyll fluorescence and cell counting) and coenobium formation. EE2 and E2 were more toxic to individual and combined (S+) cultures than was E1. The frequency of coenobium formation by D. subspicatus increased significantly for all estrogens and all concentrations. After 96 h, D. subspicatus prevailed in S+. The results of the exposure to E+ suggested a less-than-additive effect on D. subspicatus and S+ and additive effect on P. subcapitata. Toxic effects occurred for both species exposed to E+ with individual estrogen concentrations below the NOEC of each species. Assays must include changes in response due to the exposure of more than one species to more than one estrogen.

Anaerobic baffled reactor coupled with chemical precipitation for treatment and toxicity reduction of industrial wastewater.

This study describes the reduction of soluble chemical oxygen demand (CODs) and the removal of dissolved organic carbon (DOC), formaldehyde (FA) and nitrogen from highly polluted wastewater generated during cleaning procedures in wood floor manufacturing using a laboratory-scale biological anaerobic baffled reactor followed by chemical precipitation using MgCI2 .6H20 + Na2HPO4. By increasing the hydraulic retention time from 2.5 to 3.7 and 5 days, the reduction rates of FA, DOC and CODs of nearly 100%, 90% and 83%, respectively, were achieved. When the Mg:N:P molar ratio in the chemical treatment was changed from 1:1:1 to 1.3:1:1.3 at pH 8, the NH4+ removal rate increased from 80% to 98%. Biologically and chemically treated wastewater had no toxic effects on Vibrio fischeri and Artemia salina whereas chemically treated wastewater inhibited germination of Lactuca sativa owing to a high salt content. Regardless of the high conductivity of the treated wastewater, combined biological and chemical treatment was found to be effective for the removal of the organic load and nitrogen, and to be simple to operate and to maintain. A combined process such as that investigated could be useful for on-site treatment of low volumes of highly polluted wastewater generated by the wood floor and wood furniture industries, for which there is no suitable on-site treatment option available today.