A paleoecological investigation of recent cyanobacterial blooms and their drivers in two contrasting lakes.

Cyanobacterial blooms are one of the most significant threats to global water security and freshwater biodiversity. Interactions among multiple stressors, including habitat degradation, species invasions, increased nutrient runoff, and climate change, are key drivers. However, assessing the role of anthropogenic activity on the onset of cyanobacterial blooms and exploring response variation amongst lakes of varying size and depth is usually limited by lack of historical records. In the present study we applied molecular, paleolimnological (trace metal, Itrax-µ-XRF and hyperspectral scanning, chronology), paleobotanical (pollen) and historical data to reconstruct cyanobacterial abundance and community composition and anthropogenic impacts in two dune lakes over a period of up to 1200 years. Metabarcoding and droplet digital PCR results showed very low levels of picocyanobacteria present in the lakes prior to about CE 1854 (1839-1870 CE) in the smaller shallow Lake Alice and CE 1970 (1963-1875 CE) in the larger deeper Lake Wiritoa. Hereafter bloom-forming cyanobacteria were detected and increased notably in abundance post CE 1984 (1982-1985 CE) in Lake Alice and CE 1997 (1990-2007 CE) in Lake Wiritoa. Currently, the magnitude of blooms is more pronounced in Lake Wiritoa, potentially attributable to hypoxia-induced release of phosphorus from sediment, introducing an additional source of nutrients. Generalized linear modelling was used to investigate the contribution of nutrients (proxy = bacterial functions), temperature, redox conditions (Mn:Fe), and erosion (Ti:Inc) in driving the abundance of cyanobacteria (ddPCR). In Lake Alice nutrients and erosion had a statistically significant effect, while in Lake Wiritoa nutrients and redox conditions were significant.

Room-Temperature One-Pot Synthesis of pH-Responsive Pyridine-Functionalized Carbon Surfaces.

Carbon surfaces (glassy carbon, graphite, and boron-doped diamond) were functionalized with layers composed of linked pyridinium and pyridine moieties using simple electrochemical reduction of trifluoroacetylpyridinium. The pyridinium species was generated in situ in solution by the reaction of trifluoroacetic anhydride and pyridine precursors and underwent electrochemical reduction at -1.97 V vs Fc/Fc+, as determined by cyclic voltammetry. The pyridine/pyridinium films were electrodeposited at room temperature, on a timescale of minutes, and were characterized using X-ray photoelectron spectroscopy. The as-prepared films have a net positive charge in aqueous solution at pH 9 and below due to the pyridinium content, confirmed by the electrochemical response of differently charged redox molecules at the functionalized surfaces. The positive charge can be enhanced further through protonation of the neutral pyridine component by controlling the solution pH. Moreover, the nitrogen-acetyl bond can be cleaved through base treatment to purposefully increase the neutral pyridine proportion of the film. This results in a surface that can be "switched" from functionally near neutral to a positive charge by treatment in basic and acidic solutions, respectively, through manipulation of the protonation state of the pyridine. The functionalization process demonstrated here is readily achievable at a fast timescale at room temperature and hence can allow for rapid screening of surface properties. Such functionalized surfaces present a means to test in isolation the specific catalytic performance of pyridinic groups toward key processes such as oxygen and CO2 reduction.

The Role of Phosphate Group in Doped Cobalt Molybdate: Improved Electrocatalytic Hydrogen Evolution Performance.

The hydrogen evolution reaction (HER) is a critical process in the electrolysis of water. Recently, much effort has been dedicated to developing low-cost, highly efficient, and stable electrocatalysts. Transition metal phosphides are investigated intensively due to their high electronic conductivity and optimized absorption energy of intermediates in acid electrolytes. However, the low stability of metal phosphide materials in air and during electrocatalytic processes causes a decay of performance and hinders the discovery of specific active sites. The HER in alkaline media is more intricate, which requires further delicate design due to the Volmer steps. In this work, phosphorus-modified monoclinic ß-CoMoO4 is developed as a low-cost, efficient, and stable HER electrocatalyst for the electrolysis of water in alkaline media. The optimized catalyst shows a small overpotential of 94 mV to reach a current density of 10 mA cm-2 for the HER with high stability in KOH electrolyte, and an overpotential of 197 mV to reach a current density of 100 mA cm-2. Combined computational and in situ spectroscopic techniques show P is present as a surface phosphate ion; that electron holes localize on the surface ions and both (P-O1-) and Co3+-OH- are prospective surface active sites for the HER.

Precise automatic classification of 46 different pollen types with convolutional neural networks.

In palynology, the visual classification of pollen grains from different species is a hard task which is usually tackled by human operators using microscopes. Many industries, including medical and pharmaceutical, rely on the accuracy of this manual classification process, which is reported to be around 67%. In this paper, we propose a new method to automatically classify pollen grains using deep learning techniques that improve the correct classification rates in images not previously seen by the models. Our proposal manages to properly classify up to 98% of the examples from a dataset with 46 different classes of pollen grains, produced by the Classifynder classification system. This is an unprecedented result which surpasses all previous attempts both in accuracy and number and difficulty of taxa under consideration, which include types previously considered as indistinguishable.

In Situ Determination of pH at Nanostructured Carbon Electrodes Using IR Spectroscopy.

Changes in pH at electrode surfaces can occur when redox reactions involving the production or consumption of protons take place. Many redox reactions of biological or analytical importance are proton-coupled, resulting in localized interfacial pH changes as the reaction proceeds. Other important electrochemical reactions, such as hydrogen and oxygen evolution reactions, can likewise result in pH changes near the electrode. However, it is very difficult to measure pH changes located within around 100 µm of the electrode surface. This paper describes the use of in situ attenuated total reflectance (ATR) infrared (IR) spectroscopy to determine the pH of different solutions directly at the electrode interface, while a potential is applied. Changes in the distinctive IR bands of solution phosphate species are used as an indicator of pH change, given that the protonation state of the phosphate ions is pH-dependent. We found that the pH at the surface of an electrode modified with carbon nanotubes can increase from 4.5 to 11 during the hydrogen evolution reaction, even in buffered solutions. The local pH change accompanying the hydroquinone-quinone redox reaction is also determined.

Investigations into the mechanism of copper-mediated Glaser-Hay couplings using electrochemical techniques.

The mechanism of the copper mediated C-C bond forming reaction known as Glaser-Hay coupling (alkyne dimerization) has been investigated using electrochemical techniques. Applying an oxidative potential to a copper or copper-coated graphite electrode in the presence of the organic base DABCO results in the dimerization of phenylacetylene in good yield. Further mechanistic investigation has shown that this reaction medium results in the assembly of a dinuclear Cu(i) complex which, although previously reported, has never been shown to have catalytic properties for C-C bond formation. The complex is reminiscent of that proposed in the Bohlmann model for the Glaser-Hay reaction and as such lends weight to this proposed mechanism above the alternative proposed mononuclear catalytic cycle.

Models of the iron-only hydrogenase enzyme: structure, electrochemistry and catalytic activity of Fe2(CO)3(µ-dithiolate)(µ,κ1,κ2-triphos).

A series of diiron bis(2-diphenylphosphinoethyl)phenylphosphine (triphos) complexes Fe2(CO)3(µ-dithiolate)(µ,κ1,κ2-triphos) (1-4) [dithiolate = 1 pdt; 2 edt; 3 adt (R = Bz), 4 (SMe)2] have been prepared and investigated as biomimics of the diiron site of [FeFe]-hydrogenases. The triphos ligand bridges the diiron vector whilst also chelating to one iron and 1-3 exist as a mixture of basal-basal-apical (bba) and basal-basal-basal (bbb) isomers which differ in the mode of chelation. In solution the bba and bbb forms do not interconvert on the NMR time scale, but the bba isomers are fluxional, and at low temperature four forms of 1bba are seen as the conformations for the pdt ring and triphos methylene groups are frozen. Crystallographic studies have established bba (pdt) and bbb (adt) ground state conformations and in both there is a significant deviation away from the expected eclipsed conformation (Lap-Fe-Fe-Lap torsion angle 0°) by 49.4 and 24.9° respectively, suggesting that introduction of triphos leads to significant strain and DFT calculations have been used to understand the relative energies of isomers. The electron rich nature of the diiron centre in 1-4 would suggest rapid protonation, but while bridging hydride complexes such as [Fe2(CO)3(µ-pdt)(µ,κ1,κ2-triphos)(µ-H)][BF4] (1H+) can be formed the process is slow. This behavior is likely a result of the high energy barrier in forming the initial (not observed) terminal hydride which requires a significant conformational change in triphos coordination. CV studies show that all starting compounds oxidize at low potentials and the addition of [Cp2Fe][PF6] to 1 affords [Fe2(CO)3(µ-pdt)(µ,κ1,κ2-triphos)][PF6] (1+) which has been characterised by IR spectroscopy. DFT studies suggest a ground state for 1+ with a partially rotated Fe(CO)2P moiety that yields a weak semi-bridging carbonyl with the adjacent Fe(CO)P2 group. No reduction peaks are seen for 1-4 within the solvent window but 1H+ undergoes reduction at -1.7 V. All complexes act as proton-reduction catalysts in the presence of HBF4·Et2O. For 1, three separate processes are observed and their dependence on acid concentration has been probed, and a mechanistic scheme is proposed based on formation via a CECE process of 1(µ-H)H which can either slowly release H2 or undergo further reduction. Relative contributions of the three processes to the total current were found to be highly dependent upon the background electrolyte, being attributed to their relative abilities to facilitate proton transfer processes. While 2 and 4 show similar proton reduction behaviour, the adt complex 3 is quite different being attributed to facile protonation of nitrogen which is followed by addition of a second proton at the diiron centre.

Electrochemical synthesis of copper(i) acetylides via simultaneous copper ion and catalytic base electrogeneration for use in click chemistry.

We report an efficient and sustainable electrochemical synthesis of copper(i) acetylides using simultaneous copper oxidation and Hofmann elimination of quaternary ammonium salts. The electrochemically-generated base was also regenerated electrochemically, making it catalytic. A 'Click test' (CuAAC reaction) was performed to assess product purity and an electrochemically-promoted, one-pot CuAAC reaction was performed, which serves as a promising initial demonstration of this approach in a pharmaceutically-relevant reaction.

Insight into the Nature of Iron Sulfide Surfaces During the Electrochemical Hydrogen Evolution and CO2 Reduction Reactions.

Greigite and other iron sulfides are potential, cheap, earth-abundant electrocatalysts for the hydrogen evolution reaction (HER), yet little is known about the underlying surface chemistry. Structural and chemical changes to a greigite (Fe3S4)-modified electrode were determined at -0.6 V versus standard hydrogen electrode (SHE) at pH 7, under conditions of the HER. In situ X-ray absorption spectroscopy was employed at the Fe K-edge to show that iron-sulfur linkages were replaced by iron-oxygen units under these conditions. The resulting material was determined as 60% greigite and 40% iron hydroxide (goethite) with a proposed core-shell structure. A large increase in pH at the electrode surface (to pH 12) is caused by the generation of OH- as a product of the HER. Under these conditions, iron sulfide materials are thermodynamically unstable with respect to the hydroxide. In situ infrared spectroscopy of the solution near the electrode interface confirmed changes in the phosphate ion speciation consistent with a change in pH from 7 to 12 when -0.6 V versus SHE is applied. Saturation of the solution with CO2 resulted in the inhibition of the hydroxide formation, potentially due to surface adsorption of HCO3-. This study shows that the true nature of the greigite electrode under conditions of the HER is a core-shell greigite-hydroxide material and emphasizes the importance of in situ investigation of the catalyst under operation to develop true and accurate mechanistic models.

Electrochemical Fouling of Dopamine and Recovery of Carbon Electrodes.

A significant problem with implantable sensors is electrode fouling, which has been proposed as the main reason for biosensor failures in vivo. Electrochemical fouling is typical for dopamine (DA) as its oxidation products are very reactive and the resulting polydopamine has a robust adhesion capability to virtually all types of surfaces. The degree of DA fouling of different carbon electrodes with different terminations was determined using cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM) approach curves and imaging. The rate of electron transfer kinetics at the fouled electrode surface was determined from SECM approach curves, allowing a comparison of insulating film thickness for the different terminations. SECM imaging allowed the determination of different morphologies, such as continuous layers or islands, of insulating material. We show that heterogeneous modification of carbon electrodes with carboxyl-amine functionalities offers protection against formation of an insulating polydopamine layer, while retaining the ability to detect DA. The benefits of the heterogeneous termination are proposed to be due to the electrostatic repulsion between amino-functionalities and DA. Furthermore, we show that the conductivity of the surfaces as well as the response toward DA was recovered close to the original performance level after cleaning the surfaces for 10-20 cycles in H2SO4 on all materials but pyrolytic carbon (PyC). The recovery capacity of the PyC electrode was lower, possibly due to stronger adsorption of DA on the surface.

Copper complexes with dissymmetrically substituted bis(thiosemicarbazone) ligands as a basis for PET radiopharmaceuticals: control of redox potential and lipophilicity.

Copper(ii) bis(thiosemicarbazone) derivatives have been used extensively in positron emission tomography (PET) to image hypoxia and blood flow and to radiolabel cells for cell tracking. These applications depend on control of redox potentials and lipophilicity of the bis(thiosemicarbazone) complexes, which can be adjusted by altering peripheral ligand substituents. This paper reports the synthesis of a library of new dissymmetrically substituted bis(thiosemicarbazone) ligands by controlling the condensation reactions between dicarbonyl compounds and 4-substituted-3-thiosemicarbazides or using acetal protection. Copper complexes of the new ligands have been prepared by reaction with copper acetate or via transmetallation of the corresponding zinc complexes, which are convenient precursors for the rapid synthesis of radio-copper complexes. Well-defined structure-activity relationships linking ligand alkylation patterns with redox potential and lipophilicity of the complexes are reported.

In situ spectroscopic monitoring of CO2 reduction at copper oxide electrode.

Copper oxide modified electrodes were investigated as a function of applied electrode potential using in situ infrared spectroscopy and ex situ Raman and X-ray photoelectron spectroscopy. In deoxygenated KHCO3 electrolyte bicarbonate and carbonate species were found to adsorb to the electrode during reduction and the CuO was reduced to Cu(i) or Cu(0) species. Carbonate was incorporated into the structure and the CuO starting material was not regenerated on cycling to positive potentials. In contrast, in CO2 saturated KHCO3 solution, surface adsorption of bicarbonate and carbonate was not observed and adsorption of a carbonato-species was observed with in situ infrared spectroscopy. This species is believed to be activated, bent CO2. On cycling to negative potentials, larger reduction currents were observed in the presence of CO2; however, less of the charge could be attributed to the reduction of CuO. In the presence of CO2 CuO underwent reduction to Cu2O and potentially Cu, with no incorporation of carbonate. Under these conditions the CuO starting material could be regenerated by cycling to positive potentials.

Nanodiamonds on tetrahedral amorphous carbon significantly enhance dopamine detection and cell viability.

We hypothesize that by using integrated carbon nanostructures on tetrahedral amorphous carbon (ta-C), it is possible to take the performance and characteristics of these bioelectrodes to a completely new level. The integrated carbon electrodes were realized by combining nanodiamonds (NDs) with ta-C thin films coated on Ti-coated Si-substrates. NDs were functionalized with mixture of carboxyl and amine groups NDandante or amine NDamine, carboxyl NDvox or hydroxyl groups NDH and drop-casted or spray-coated onto substrate. By utilizing these novel structures we show that (i) the detection limit for dopamine can be improved by two orders of magnitude [from 10µM to 50nM] in comparison to ta-C thin film electrodes and (ii) the coating method significantly affects electrochemical properties of NDs and (iii) the ND coatings selectively promote cell viability. NDandante and NDH showed most promising electrochemical properties. The viability of human mesenchymal stem cells and osteoblastic SaOS-2 cells was increased on all ND surfaces, whereas the viability of mouse neural stem cells and rat neuroblastic cells was improved on NDandante and NDH and reduced on NDamine and NDvox. The viability of C6 cells remained unchanged, indicating that these surfaces will not cause excess gliosis. In summary, we demonstrated here that by using functionalized NDs on ta-C thin films we can significantly improve sensitivity towards dopamine as well as selectively promote cell viability. Thus, these novel carbon nanostructures provide an interesting concept for development of various in vivo targeted sensor solutions.

CO2 capture and electrochemical conversion using superbasic [P66614][124Triz].

The ionic liquid trihexyltetradecylphosphonium 1,2,4-triazolide, [P66614][124Triz], has been shown to chemisorb CO2 through equimolar binding of the carbon dioxide with the 1,2,4-triazolide anion. This leads to a possible new, low energy pathway for the electrochemical reduction of carbon dioxide to formate and syngas at low overpotentials, utilizing this reactive ionic liquid media. Herein, an electrochemical investigation of water and carbon dioxide addition to the [P66614][124Triz] on gold and platinum working electrodes is reported. Electrolysis measurements have been performed using CO2 saturated [P66614][124Triz] based solutions at -0.9 V and -1.9 V on gold and platinum electrodes. The effects of the electrode material on the formation of formate and syngas using these solutions are presented and discussed.

Reduction of Carbon Dioxide to Formate at Low Overpotential Using a Superbase Ionic Liquid.

A new low-energy pathway is reported for the electrochemical reduction of CO2 to formate and syngas at low overpotentials, utilizing a reactive ionic liquid as the solvent. The superbasic tetraalkyl phosphonium ionic liquid [P66614][124Triz] is able to chemisorb CO2 through equimolar binding of CO2 with the 1,2,4-triazole anion. This chemisorbed CO2 can be reduced at silver electrodes at overpotentials as low as 0.17 V, forming formate. In contrast, physically absorbed CO2 within the same ionic liquid or in ionic liquids where chemisorption is impossible (such as [P66614][NTf2]) undergoes reduction at significantly increased overpotentials, producing only CO as the product.

Electrocatalytic proton reduction catalysed by the low-valent tetrairon-oxo cluster [Fe4(CO)10(κ(2)-dppn)(µ4-O)](2-) [dppn = 1,1'-bis(diphenylphosphino)naphthalene].

The 62-electron oxo-capped tetrairon butterfly cluster, Fe4(CO)10(κ(2)-dppn)(µ4-O) (1) {dppn = 1,8-bis(diphenylphosphino)naphthalene}, undergoes reversible one-electron oxidation and reduction events to generate the 61- and 63-electron radicals [Fe4(CO)10(κ(2)-dppn)(µ4-O)](+) (1+) and [Fe4(CO)10(κ(2)-dppn)(µ4-O)](-) (1-) respectively. Addition of a second electron affords the 64-electron cluster [Fe4(CO)10(κ(2)-dppn)(µ4-O)](2-) (1(2-)) which has more limited stability but is stable within the time frame of the electrochemical experiment. While 1 and 1(-1) are inactive as proton reduction catalysts, dianionic 1(2-) is active for the formation of hydrogen from both CHCl2CO2H and CF3CO2H. This occurs via two separate mechanistic cycles branching at the mono-protonated species [Fe4(CO)10(κ(2)-dppn)(µ4-O)H](-) (1H-) resulting from the rapid protonation of 1(2-). This intermediate then undergoes competing protonation and reduction events leading to EECC and ECEC catalytic cycles respectively with 1- being pivotal to both. In order to understand the nature of [Fe4(CO)10(κ(2)-dppn)(µ4-O)](2-) (1(2-)) and its protonated products density functional theory (DFT) calculations have been employed. Theoretical calculations reveal that the cluster core remains intact in 1(2-), but the two consecutive one-electron reductions lead to an expansion of one of the trigonal-pyramids of this trigonal-bipyramidal cluster. The two-electron reduced cluster 1(2-) protonates at dppn-bound iron, accompanied by a wingtip-hinge iron-iron bond scission, and then reacts with a second proton to evolve hydrogen.