Loss of micropollutants on syringe filters during sample filtration: Machine learning approach for selecting appropriate filters.

Prefiltration before chromatographic analysis is critical in the monitoring of environmental micropollutants (MPs). However, in an aqueous matrix, such monitoring often leads to out-of-specification results owing to the loss of MPs on syringe filters. Therefore, this study investigated the loss of seventy MPs on eight different syringe filters by employing Random Forest, a machine learning algorithm. The results indicate that the loss of MPs during filtration is filter specific, with glass microfiber and polytetrafluoroethylene filters being the most effective (< 20%) compared with nylon (> 90%) and others (regenerated-cellulose, polyethersulfone, polyvinylidene difluoride, cellulose acetate, and polypropylene). The Random Forest classifier showed outstanding performance (accuracy range 0.81 to 0.95) for determining whether the loss of MPs on filters exceeded 20%. Important factors in this classification were analyzed using the SHapley Additive exPlanation value and Kruskal-Wallis test. The results show that the physicochemical properties (LogKow/LogD, pKa, functional groups, and charges) of MPs are more important than the operational parameters (sample volume, filter pore size, diameter, and flow rate) in determining the loss of most MPs on syringe filters. However, other important factors such as the implications of the roles of pH for nylon and pre-rinsing for PTFE syringe filters should not be ignored. Overall, this study provides a systematic framework for understanding the behavior of various MP classes and their potential losses on syringe filters.

Predicting micropollutant fate during wastewater treatment using refined classical kinetic model based on quantitative monitoring in multi-metropolitan regions of South Korea.

This study aimed to implement an extensive prediction model for the fate of micropollutants (MPs) in wastewater treatment plants (WWTPs). Five WWTPs equipped with seven different biological treatment processes were monitored from 2020 to 2022 with three to four sampling events in each year, and 27 datasets for 20 MPs were collected. Among these datasets, 12 were used to investigate the behavior and fate of MPs in WWTPs in South Korea. Metformin, acetaminophen, caffeine, naproxen, and ibuprofen were the MPs with the highest influent concentrations (ranging from 3,933.3-187,637.0 ng L-1) at all WWTPs. More than 90% of MPs were removed by biological treatment processes in all WWTPs. The Kruskal-Wallis test verified that their efficacy did not differ statistically (p-value > 0.05). Meanwhile, to refine the performance of the prediction model, this study optimized the biodegradation rate constants (kbio) of each MP according to the variation of seasonal water temperature. As a result, compared to the original prediction model, the mean difference between the actual data and predicted results (MEAN) decreased by 6.77%, while the Nash-Sutcliffe efficiency (NSE) increased by 0.226. The final MEAN and NSE for the refined prediction model were calculated to be 5.09% and 0.964, respectively. The prediction model made accurate predictions, even for MPs exhibiting behaviors different from other cases, such as estriol and atrazine. Consequently, the optimization strategy proposed in this study was determined to be effective because the overall removal efficiencies of MPs were successfully predicted even with limited reference datasets.

Cr-Doped FeC2O4 Microrods Formed Directly on AISI 420 Stainless Steel to Enhance Electrochemical NO3- Reduction to N2 at Circumneutral pH.

We synthesized low-cost cathodes for use in the electrochemical NO3- reduction reaction (NO3RR) via the simple reconstruction of AISI 420 stainless steel (SS). Thermochemical treatment of the SS in oxalic acid generated iron oxalate (FeC2O4) microrods (BL-SS), with further anodization affording Cr-doped Fe2O3 (R-SS) or FeC2O4 (G-SS). G-SS displayed supreme N2 selectivity during galvanostatic electrolysis at circumneutral pH. Electroanalysis and descriptor/scavenger analysis indicated that Fe sites were the primary active sites of NO3- adsorption, with C2O42- as the H-binding sites. The C2O42- ligands and Cr dopants altered the electronic structures of the Fe sites. A parametric study of the current density, pH, [NO3-]0, and [Cl-]0 indicated an Eley-Rideal N2 generation mechanism, with NO2- as an intermediate. Cl- elevated the N2 selectivity but reduced the NO3RR efficiency. To demonstrate the practical applicability of G-SS with a proposed regeneration strategy, its durability was examined in synthetic and real wastewater matrices. Compared with that in synthetic wastewater, G-SS displayed more stable performance in real wastewater owing to the natural buffering capacity at the cathode, which reduced the corrosion rate. Cr-doped FeC2O4 is viable for use in the low-cost, efficient electrochemical treatment of wastewater containing NO3-.

Real-time morphological detection of label-free submicron-sized plastics using flow-channeled differential interference contrast microscopy.

Owing to the surge in plastic waste generated during the COVID-19 pandemic, concerns regarding microplastic pollution in aqueous environments are increasing. Since microplastics (MPs) are broken down into submicron (< 1 µm) and nanoscale plastics, their real-time morphological detection in water is necessary. However, the decrease in the scattering cross-section of MPs in aqueous media precludes morphological detection by bright-field microscopy. To address this problem, we propose and demonstrate a differential interference contrast (DIC) system that incorporates a magnification-enhancing system to detect MPs in aqueous samples. To detect MPs in both the stationary and mobile phases, a microfluidic chip was designed, taking into consideration the imaging depth of focus and flow resistance. MPs of various sizes flowing in deionized, tap, and pond water at varying speeds were observed under Static and Flow conditions. Successful real-time morphological detection and quantification of polystyrene beads down to 200 nm at a constant flow rate in water were achieved. Thus, the proposed novel method can significantly reduce analysis time and improve the size-detection limit. The proposed DIC microscopy system can be coupled with Raman or infrared spectroscopy in future studies for chemical composition analysis. ENVIRONMENTAL IMPLICATION: Microplastics (MPs), particularly submicron plastics < 1-µm, can pose a risk to human health and aquatic ecosystems. Existing methods for detecting MPs in the aqueous phase have several limitations, including the use of expensive instruments and prolonged and labor-intensive procedures. Our results clearly demonstrated that a new low-cost flow-channeled differential interference contrast microscopy enables the real-time morphological detection and quantification of MPs down to 200 nm under flowing conditions without sample labeling. Consequently, our proposed rapid method for accurate quantitative measurements can serve as a valuable reference for detecting submicron plastics in water samples.

Ni-Fe Oxides/TiO2 Heterojunction Anodes for Reactive Chlorine Generation and Mediated Water Treatment.

Reactive chlorine-mediated electrochemical water treatment necessitates selective chlorine evolution reaction (ClER) versus parallel oxygen evolution reaction (OER) in mild pH (7-10), with minimal deployments of precious electrocatalysts. This study reports Ni0.33Fe0.67Oy/TiO2 heterojunction anode prepared by a straightforward sol-gel coating with thermal decomposition at 425 °C. The ClER current efficiency (CE, 70%) and energy efficiency (2.3 mmol W h-1) were comparable to benchmarking Ir7Ta3Oy/TiO2 at 30 mA cm-2 in 50 mM NaCl solutions with near-neutral pH. Correlations of ClER CE of variable NixFe1-xOy/TiO2 (x: 0.33, 0.8-1) with the flat-band potential and p-band center, as experimental descriptors for surface charge density, nominated the outer TiO2 to be the active ClER center. The underlying Ni0.33Fe0.67Oy, characterized as biphasic NiFe2O4 and NiO, effectively lowered the O binding energy of TiO2 by electronic interaction across the junction. The OER activity of Ni0.33Fe0.67Oy superior to the other Fe-doped Ni oxides suggested that the conductive OER intermediates generated on Ni0.33Fe0.67Oy could also facilitate the ClER as an ohmic contact. Stability tests and NH4+ degradation in synthetic and real wastewater confirmed the feasibility of Ni0.33Fe0.67Oy/TiO2 heterojunction anode for mediated water treatments in mild pH.

Doped and immobilized titanium dioxide photocatalysts as a potential source of nitrosamine formation.

Immobilized and visible-light-active titanium dioxide (TiO2) is widely used for water treatment. However, the accelerated generation of degradation byproducts is a potential risk of TiO2-based photocatalysis. This study aimed to investigate the structural effect of engineered TiO2 samples on the formation of major nitrosamines during photocatalysis. The nitrogen-containing impurities and leached metal ions from doped-TiO2 samples could exacerbate nitrosamine formation potential (FP) in distilled water, secondary effluent, and chloraminated water. Doped-TiO2 with 2-ethylimidazole, trimethylamine, triethylamine, and N-carbon nanotubes could leach in the range of 47-64 ng L-1 nitrosamines (including N-nitrosomethylethylamine, N-nitrosodiethylamine, N-nitrosodimethylamine, and N-nitrosopyrrolidine) even under dark conditions. Furthermore, we investigated the role of metal dopants on nitrosamine-FP during the chloramination of precursors such as dimethylamine and microcystin-LR. Metal ions such as Cu that leached from the metal-doped catalysts may catalyze the nitrosamine-FP. Therefore, pre-purification (washing) and immobilization of doped-TiO2 samples on substrates are suggested to remove a considerable amount of nitrosamines. However, during the prolonged tryout, the selection of substrates was critical. Polymeric supports, such as polyimide and polyvinylpyrrolidone, can produce up to 85 ng L-1 nitrosamine, whereas TiO2 immobilized onto steel mesh can remove nitrosamine formation during photocatalytic oxidation followed by chloramination. This study systematically screened a diverse range of dopants, supports, and solvents in engineered TiO2 photocatalysts, in 61 samples, and provided novel insights into their effect on nitrosamine formation.

A multi-scale framework for modeling transport of microplastics during sand filtration: Bridging from pore to continuum.

The fate and transport of microplastics (MPs) during deep bed filtration were investigated using combined laboratory experiments and numerical modeling. A series of column experiments were conducted within the designated ranges of six operating parameters (i.e., size of the MP and collector, seepage velocity, porosity, temperature, and ionic strength). A variance-based sensitivity analysis, the Fourier amplitude sensitivity test, was conducted to determine the priority in affecting both the attachment coefficient at the pore scale, and the subsequent stabilized height of the breakthrough curve at the continuum scale, which follows non-monotonic trends with singularity in the size of MP (i.e., 1 µm). Finally, Damkohler numbers were introduced to analyze the dominant mechanisms (e.g., attachment, detachment, or straining) in the coupled hydro-chemical process. The robustness of conceptual frameworks bridges the gap between pore-scale interactions and the explicit MPs removal in the continuum scale, which could support decision-making in determining the priority of parameters to retain MPs during deep bed filtration.

Transformation of microplastics by oxidative water and wastewater treatment processes: A critical review.

Microplastics (MPs) are contaminants of emerging concern that accumulate in various environments, where they pose threats to both the ecosystem and public health. Since MPs have been detected in drinking water resources and wastewater effluents, more efficient treatment is needed at wastewater treatment plants (WWTPs) and drinking water treatment plants (DWTPs). This review discusses the potential of biological, photochemical, Fenton (-like) systems, ozonation, and other oxidation processes in the treatment of MPs in terms of their indicators of oxidation such as mass loss and surface oxidation. The oxidation processes were further analyzed in terms of limitations and environmental implications. Most previous studies examining MPs degradation using conventional treatments-such as UV disinfection, ozonation, and chlorination-employed significantly higher doses than the common doses applied in DWTPs and WWTPs. Owing to such dose gaps, the oxidative transformation of MPs observed in many previous studies are not likely to occur under practical conditions. Some novel oxidation processes showed promising MPs treatment efficiencies, while many of them have not yet been applied on a larger scale due to high costs and the lack of extensive basic research. Health and environmental impacts related to the discharge of oxidized MPs in effluents should be considered carefully in different aspects: the role as vectors of external pollutants, release of organic compounds (including organic byproducts from oxidation) and fragmentation into smaller particles as MPs circulate in the ecosystem as well as the possibility of bioaccumulation. Future research should also focus on ways to incorporate developed oxidation processes in DWTPs and WWTPs to mitigate MPs contamination.

Limonin, a Component of Immature Citrus Fruits, Activates Anagen Signaling in Dermal Papilla Cells.

Hair loss remains a significant problem that is difficult to treat; therefore, there is a need to identify safe natural materials that can help patients with hair loss. We evaluated the hair anagen activation effects of limonin, which is abundant in immature citrus fruits. Limonin increased the proliferation of rat dermal papilla cells (rDPC) by changing the levels of cyclin D1 and p27, and increasing the number of BrdU-positive cells. Limonin increased autophagy by decreasing phosphorylated mammalian target of rapamycin levels and increasing the phospho-Raptor, ATG7 and LC3B. Limonin also activated the Wnt/ß-catenin pathway by increasing phospho-ß-catenin levels. XAV939, a Wnt/ß-catenin inhibitor, inhibited these limonin-induced changes, including induced autophagy, BrdU-positive cells, and cell proliferation. Limonin increased the phosphorylated AKT levels in both two-dimensional cultured rDPC and three-dimensional spheroids. Treatment with the PI3K inhibitor wortmannin inhibited limonin-induced proliferation, and disrupted other limonin-mediated changes, including decreased p27, increased BrdU-positive cells, induced autophagy, and increased ATG7 and LC3B levels. Wortmannin also inhibited limonin-induced cyclin D1 and LC3 expression in spheroids. Collectively, these results indicate that limonin can enhance anagen signaling by activating autophagy via targeting the Wnt/ß-catenin and/or PI3K/AKT pathways in rDPC, highlighting a candidate nutrient for hair loss treatment.

Changes in levels of N-nitrosamine formed from amine-containing compounds during chloramination via photocatalytic pretreatment with immobilized TiO2: Effect of source water and pH.

We investigated the effectiveness of photocatalytic pretreatment (PCP) of precursors in minimizing the formation potentials (FPs) of carcinogenic nitrosamines, including N-nitrosodimethylamine (NDMA), N-nitrosodiethylamine (NDEA), and N-nitrosodiethanolamine (NDELA), during water chloramination. A steel mesh substrate with immobilized TiO2 was highly efficient at mitigating nitrosamine formation and removing targeted precursors such as ranitidine, nizatidine, trimebutine, triethanolamine, and metoclopramide. Compared to UVC/H2O2, PCP under UVA irradiation (intensity of 0.67 mW cm-2) was more effective for reducing nitrosamine-FPs during post-chloramination. However, the PCP efficacies varied with the water source, pretreatment pH, and irradiation time. For example, PCP of eutrophic water increased the NDMA-FPs, but produced notable reductions (up to 99%) for NDELA- and NDEA-FPs. Shorter irradiation times, up to 15 min, increased the NDELA-FP in triethanolamine, and the NDMA-FP in nizatidine and trimebutine. However, the nitrosamine-FP decreased by > 50% after PCP at a pH > 5.6, following irradiation for 120 min. Oxygen addition, N-de(m)ethylation, and N-dealkylation were responsible for decreasing nitrosamine-FPs via the destruction of key moieties; this has been elucidated by mass spectroscopy. This study suggests that PCP could be used as an alternative strategy for minimizing nitrosamine-FPs during water treatment.

Degradation of ranitidine and changes in N-nitrosodimethylamine formation potential by advanced oxidation processes: Role of oxidant speciation and water matrix.

This study investigated the effects of thirteen (photo/electro) chemical oxidation processes on the formation potential (FP) of N-nitrosodimethylamine (NDMA) during the chloramination of ranitidine in reverse osmosis (RO) permeate and brine. The NDMA-FP varied significantly depending on the pretreatment process, initial pH, and water matrix types. At higher initial pH values (> 7.0), most pretreatments did not reduce the NDMA-FP, presumably because few radical species and more chloramine-reactive byproducts were generated. At pH < 7.0, however, electrochemical oxidation assisted by chloride and Fe2+/H2O2, catalytic wet peroxide oxidation and peroxydisulfate-induced pretreatments removed up to 85% of NDMA-FP in the RO brine. Ultraviolet (UV) irradiation or prechlorination alone did not reduce the NDMA-FP effectively, but combined UV/chlorine treatment effectively reduced the NDMA-FP. In contrast, after UV irradiation (2.1 mW cm-2 for 0.5 h) in the presence of H2O2 and chloramine, NDMA formation increased substantially (up to 26%) during the post-chloramination of the RO permeate. Mass spectrometric analysis and structural elucidation of the oxidation byproducts indicated that compared with the reactive nitrogen species generated by UV/NH2Cl, sulfate radicals and (photo/electro)chemically generated reactive chlorine species were more promising for minimizing NDMA-FP. Unlike, the hemolytic •OH driven by UV/H2O2, the •OH from Fe(IV)-assisted pretreatments showed a significant synergistic effect on NDMA-FP reduction. Overall, the results suggest the need for a careful assessment of the type of radical species to be used for treating an RO water system containing amine-functionalized compounds.

Persulfate enhanced photoelectrochemical oxidation of organic pollutants using self-doped TiO2nanotube arrays: Effect of operating parameters and water matrix.

This study investigated the influence of adding peroxydisulfate (PDS) to a photoelectrocatalysis (PEC) system using self-doped TiO2 nanotube arrays (bl-TNAs) for organic pollutant degradation. The addition of 1.0 mM PDS increased the bisphenol-A (BPA) removal efficiency of PEC (PEC/PDS) from 65.0% to 85.9% within 1 h. The enhancement could be attributed to the high formation yield of hydroxyl radicals (·OH), increased charge separation, and assistance of the sulfate radicals (SO4·-). The PDS concentration and applied potential bias were influential operating parameters for the PEC/PDS system. In addition, the system exhibited a highly stable performance over a wide range of pH values and background inorganic and organic constituents, such as chloride ions, bicarbonate, and humic acid. Further, the degradation performance of the organic pollutant mixture, including BPA, 4-chlorophenol (4-CP), sulfamethoxazole (SMX), and carbamazepine (CBZ), was evaluated in 0.1 M (NH4)2SO4 solution and real surface water. The degradation efficiency increased in the order of CBZ < SMX < 4-CP < BPA in the PEC and PEC/PDS systems with both water matrices. Compared with the PEC system, the PEC/PDS (1.0 mM) system showed a threefold higher pseudo first-order reaction rate constant for BPA among pollutant mixtures in surface water. This was attributed to enhanced ·OH production and the selective nature of SO4·-. The pseudo first-order reaction rate constants of other pollutants, i.e., 4-CP, SMX, and CBZ increased ca. twofold in the PEC/PDS system. The results of this study showed that the PEC/PDS system with bl-TNAs is a viable technology for oxidative treatment.

Long-term and stable antimicrobial properties of immobilized Ni/TiO2 nanocomposites against Escherichia coli, Legionella thermalis, and MS2 bacteriophage.

Nickel has been extensively used as a high work function metal because of its abundance, low cost, relatively non-toxic nature, and environmentally benign characteristics. However, it has rarely been extended in a form of immobilized composite, which is a practical strategy applicable for photocatalytic antimicrobial activities. In this study, a composite of nickel and TiO2 (Ni/TiO2) was prepared using a photodeposition method, and its antibacterial properties were investigated using Escherichia coli (E. coli). To optimize Ni/TiO2 synthesis, the effect of various photodeposition conditions on antibacterial performance were investigated, such as the light irradiation time, metal content, TiO2 crystalline structure, and presence or absence of electron donors (i.e., methanol). The optimized 2 wt% Ni/TiO2 exhibited an antibacterial efficiency of 3.74 log within 7 min, which is more than 10-fold higher than that of pristine TiO2 (2.54 log). Based on this optimized weight ratio, Ni/TiO2 was immobilized on a steel mesh using an electrospray/thermal compression method, and its antibacterial performance was further assessed against E. coli, MS2 bacteriophage virus (MS2 phage), and a common pulmonary pathogen (Legionella thermalis, L. thermalis). Within 70 min, all target microorganisms achieved an inactivation that exceeded 4 log. Furthermore, the long-term stability and sustainable usability of the Ni/TiO2 mesh were confirmed by performing more than 50 antibacterial evaluation cycles using E. coli. The results of this study facilitate the successful utilization of immobilized Ni/TiO2 mesh in water disinfection applications.

Prediction of Oxidant Exposures and Micropollutant Abatement during Ozonation Using a Machine Learning Method.

Oxidation of micropollutants (MPs) by ozonation proceeds via the reactions with molecular ozone (O3) and hydroxyl radicals (•OH). To predict MP abatement during ozonation, a model that can accurately predict oxidant exposures (i.e., ∫0t[O3]dt⁢ and⁢ ∫0t[O•H]dt) needs to be developed. This study demonstrates machine learning models based on the random forest (RF) algorithm to output oxidant exposures from water quality parameters (input variables) that include pH, alkalinity, dissolved organic carbon concentration, and fluorescence excitation-emission matrix (FEEM) data (to characterize organic matter). To develop the models, 60 different samples of natural waters and wastewater effluents were collected and characterized, and the oxidant exposures in each sample were determined at a specific O3 dose (2.5 mg/L). Four RF models were developed depending on how FEEM data were utilized (i.e., one model free of FEEM data, and three other models that used FEEM data of different resolutions). The regression performance and Akaike information criterion (AIC) were evaluated for each model. The models using high-resolution FEEM data generally exhibited high prediction accuracy with reasonable AIC values, implying that organic matter characteristics quantified by FEEM can be important factors to improve the accuracy of the prediction model. The developed models can be applied to predict the abatement of MPs in drinking water and wastewater ozonation processes and to optimize the O3 dose for the intended removal of target MPs. The machine learning models using higher-resolution FEEM data offer more accurate prediction by better calculating the complex nonlinear relationship between organic characteristics and oxidant exposures.

Role of ranitidine in N-nitrosodimethylamine formation during chloramination of competing micropollutants.

Ranitidine (RNT) is a widely known precursor of N-nitrosodimethylamine (NDMA) as evinced by the self-catalytic formation of NDMA during chloramination. In the present study, the NDMA formation potentials (NDMA-FP) of 26 micropollutants were assessed, particularly when mixed with RNT. 11 compounds were identified as individual precursors, including trimebutine and cimetidine, which exhibited substantial NDMA-FP, with up to 10% molar yield. In addition, nitrosamines, other than NDMA, namely N-nitrosodiethylamine and N-nitrosomethylamine, were observed from diethylamine-containing precursors, such as metoclopramide. In a 1:1 mixture of RNT and a competitor, the change in NDMA-FP was mostly comparable (within 20% deviation), while antagonistic interactions were observed for competitors, such as diethylhydroxylamine. The scattered overall NDMA-FP should be considered as a product of competition among the precursors for core substrates and intermediates for NDMA formation. The co-existence of either trimebutine or metoclopramide with RNT led to an exceptionally synergetic NDMA generation. Degradation kinetics and chlorination/nitrosation experiments combined with mass spectroscopy analyses indicated that RNT would accelerate both the initial chlorination and nitrosation of trimebutine and metoclopramide, leading to N-nitroso complexes, which have well-understood NDMA formation pathways, i.e., amination with subsequent aminyl radical generation. This work demonstrates a wide array of precursors with NDMA-FP, suggesting that nitrosamine formation is potentially underestimated in field environments.

UV/sulfite chemistry to reduce N-nitrosodimethylamine formation in chlor(am)inated water.

The disinfection by-product N-nitrosodimethylamine (NDMA) is a major concern in water quality management due to its carcinogenicity. Thus, a proper pretreatment is necessary to mitigate NDMA formation upon periodic chloramination by removing precursors, such as ranitidine (RNT). This study investigated the effect of UV/sulfite pretreatment on NDMA formation from an RNT-spiked tap and chloraminated synthetic swimming pool (SSP) water. At UVC intensity of 2.1 mW cm-2 and 0.5 mM of sulfite, UV/sulfite chemistry showed complete degradation of 20 µM RNT within 30 min. It was found that SO4•- primarily reduced the NDMA formation potential (FP) of RNT, while hydrated electrons effectively mitigated the pre-formed NDMA in the SSP water. The UV/sulfite pretreatment alleviated NDMA formation during post-chloramination (24 h) by up to 82%, outperforming the commonly employed advanced oxidation processes such as UV/H2O2. However, in the presence of bromide ions, the effectiveness of UV/sulfite pretreatment was seriously deteriorated, although the bromide ion itself was found to inhibit the NDMA formation from RNT especially at pH < 8 during chloramination. Mass spectrometric analysis indicated that the NDMA-FP of RNT could be removed by UV/sulfite principally via N-methylation, dealkylation, and oxygen transfer pathways. Consequently, UV/sulfite could be used as an alternative unit process for water treatment with reduced NDMA formation.

In vitro and in vivo toxicological evaluation of transition metal-doped titanium dioxide nanoparticles: Nickel and platinum.

Transition metal-doped titanium dioxide nanoparticles (M-TiO2 NPs) have been studied to enhance the activity of TiO2 NPs in biomedical applications. In this study, in vitro and in vivo toxicological aspects of M-TiO2 NPs were reported to assess the safety of these materials. M-TiO2 NPs were synthesized via a photo-deposition technique. Nickel (Ni) and platinum (Pt) were used as dopants. Physicochemical properties, cytotoxicity, phototoxicity, gene ontology (GO) and dermal toxicity of M-TiO2 NPs were investigated. Ni-TiO2 (Ni, 1.02%) and Pt-TiO2 (Pt, 0.26%) NPs were sphere shape crystals with nanoscale size. ARPE-19 cells were more susceptible to Pt-TiO2 NPs (EC50, 0.796 mg/mL) than Ni-TiO2 NPs (EC50, 2.945 mg/mL). M-TiO2 NPs were rated as probably phototoxic to phototoxic. GO suggested binding function and metabolic processes as a risk mechanism of M-TiO2 NPs. In vivo toxicological effects of Ni-TiO2 NPs were not observed on body weight, serum aspartate transaminase/alanine transaminase levels, and skin histology at 61.5-6150 mg/kg. Specifically, skin thickness was not significantly modified (max. 33.2 ± 8.7 µm) and inflammation grade was less than level 2 (max. 1.2 ± 0.4). From these results, Ni-TiO2 and Pt-TiO2 NPs show promise as enhanced photocatalysts for safe and sustainable usage.

Sequential combination of nanofiltration and ettringite precipitation for managing sulfate-rich brines.

The sequential combination of nanofiltration (NF) and ettringite precipitation to manage sulfate-rich brine is proposed. In this study, NF experiments clearly demonstrated that sulfate-containing wastewater was effectively concentrated by the NF process (concentrate factor, CF > 5) with insignificant membrane fouling. Ettringite precipitation was implemented as an alternative to lime precipitation to process sulfate-rich brine resulting from the NF operation. More than 93% of the sulfate ions were removed by ettringite precipitation, whereas lime precipitation removed less than 28% under the same conditions due to the difference in their solubility. However, with highly concentrated NF brine (CF > 5), the pH and sulfate concentration of the supernatant were higher than the discharge limit. Therefore, optional blending of the supernatant after ettringite precipitation with the NF permeate was proposed to satisfy the discharge limit for sulfate. The sequential operation consisting of NF and ettringite precipitation enables sulfate-rich wastewater to be treated effectively, minimizing its negative impact by reducing the brine volume and enabling the water to be reused.

High-yield electrochemical hydrogen peroxide production from an enhanced two-electron oxygen reduction pathway by mesoporous nitrogen-doped carbon and manganese hybrid electrocatalysts.

Electrochemical hydrogen peroxide (H2O2) production by the direct two-electron (2e-) oxygen reduction reaction (ORR) has received much attention as a promising alternative to the industrially developed anthraquinone fabrication process. Transition metal (M) and nitrogen doped carbon (M-N-C, M = Fe or Co) catalysts are known to be active for four electron ORR pathways via two + two electron transfer, where the former is for the ORR and the latter for the peroxide reduction reaction (PRR). Here, we report mesoporous N-doped carbon/manganese hybrid electrocatalysts composed of MnO and Mn-Nx coupled with N-doped carbons (Mn-O/N@NCs), which have led to the development of electrocatalysis towards the 2e- ORR route. Based on the structural and electrochemical characterization, the number of transferred electrons during the ORR on the Mn-O/N@NCs was found to be close to the theoretical value of the 2e- process, indicating their high activity toward H2O2. The favored ORR process arose due to the increased number of Mn-Nx sites within the mesoporous N-doped carbon materials. Furthermore, there was a strong indication that the PRR is significantly suppressed by adjacent MnO species, demonstrating its highly selective production of H2O2 (>80%) from the oxygen electrochemical process. The results of a real fuel cell device test demonstrated that an Mn-O/N@NC catalyst sustains a very stable current, and we attributed its outstanding activity to a combination of site-dependent facilitation of 2e- transfer and a favorable porosity for mass transport.

Defective, oxygen-functionalized multi-walled carbon nanotubes as an efficient peroxymonosulfate activator for degradation of organic pollutants.

Herein, the defects and surface oxygen functionalities of multi-walled carbon nanotubes (MWCNTs) derived from a solid state reaction are demonstrated to be effective in the activation of peroxymonosulfate (PMS) for organic pollutant degradation. The catalytic activity of defective, oxygen-functionalized CNTs (dCNTs) is much better than bare CNTs, which stems from many active sites on the CNT surface, including structural defects and carbonyl functional groups, and excellent electrical conductivity. Furthermore, the effect of several operational factors and water conditions on the degradation rate of the targeted pollutant and material stability are comprehensively evaluated for the practical application of the dCNT/PMS-coupled process. The underlying catalytic mechanism in dCNTs is expected to take place via nonradical pathway and radical-induced oxidation where surface-bound radicals play a more dominant role than free radicals. The defect and oxygen functional group tuning strategy provides an effective methodology for the development of advanced carbon catalysts in Fenton-like reactions.