RESUMO
Silver (Ag) metal-based structures are promising building blocks for next-generation photonics and electronics owing to their unique characteristics, such as high reflectivity, surface plasmonic resonance effects, high electrical conductivity, and tunable electron transport mechanisms. However, Ag structures exhibit poor sustainability in terms of device performance because harsh chemicals, particularly S2- ions present in the air, can damage their structures, lowering their optical and electrical properties. Here, the surface chemistry of Ag structures with (3-mercaptopropyl)trimethoxysilane (MPTS) ligands at room temperature and under ambient conditions is engineered to prevent deterioration of their optical and electrical properties owing to S2- exposure. Regardless of the dimensions of the Ag structures, the MPTS ligands can be applied to each dimension (0D, 1D, and 3D). Consequently, highly sustainable plasmonic effects (Δλ < 2 nm), Fabry-Perot cavity resonance structures (Δλ < 2 nm), reflectors (ΔRReflectance < 0.5%), flexible electrodes (ΔRelectrical < 0.1 Ω), and strain gauge sensors (ΔGF < 1), even in S2- exposing conditions is achieved. This strategy is believed to significantly contribute to environmental pollution reduction by decreasing the volume of electronic waste.
RESUMO
Purpose: Phyllodes tumors are similar to fibroadenomas in imaging and in pathological characteristics and are difficult to identify preoperatively. The purpose of this study was to analyze the recurrence rate after excision stratified by the surgical margin width and to propose and emphasize the "wait and watch" treatment strategy for benign phyllodes tumors. Methods: We performed a retrospective cohort study of patients diagnosed with benign phyllodes tumors by surgical excision between January 2000 and December 2022 at our institution. The medical and histopathological records were reviewed. Results: The results were obtained using the Cox proportional hazard regression and logistic regression. Resection margin status and recurrence were the independent variables. In each variable selection model, the resection margin was positive or less than 1 cm, and the recurrence rate was 3.7 and 1.04 times higher than the control group, but the difference was not statistically significant in 2 analyses. Conclusion: The surgical resection margin status of benign phyllodes tumors did not significantly affect locoregional recurrence. Therefore, follow-up imaging at short intervals without additional surgery is a feasible clinical option when the surgical resection margin is positive or less than 1 cm.
RESUMO
The CRISPR-Cas system has emerged as the most efficient genome editing technique for a wide range of cells. Delivery of the Cas9-sgRNA ribonucleoprotein complex (Cas9 RNP) has gained popularity. The objective of this study was to develop a quantitative polymerase chain reaction (qPCR)-based assay to quantify the double-strand break reaction mediated by Cas9 RNP. To accomplish this, the dextransucrase gene (dsr) from Leuconostoc citreum was selected as the target DNA. The Cas9 protein was produced using recombinant Escherichia coli BL21, and two sgRNAs were synthesized through in vitro transcription to facilitate binding with the dsr gene. Under optimized in vitro conditions, the 2.6 kb dsr DNA was specifically cleaved into 1.1 and 1.5 kb fragments by both Cas9-sgRNA365 and Cas9-sgRNA433. By monitoring changes in dsr concentration using qPCR, the endonuclease activities of the two Cas9 RNPs were measured, and their efficiencies were compared. Specifically, the specific activities of dsr365RNP and dsr433RNP were 28.74 and 34.48 (unit/µg RNP), respectively. The versatility of this method was also verified using different target genes, uracil phosphoribosyl transferase (upp) gene, of Bifidobacterium bifidum and specific sgRNAs. The assay method was also utilized to determine the impact of high electrical field on Cas9 RNP activity during an efficient electroporation process. Overall, the results demonstrated that the qPCR-based method is an effective tool for measuring the endonuclease activity of Cas9 RNP.
Assuntos
Sistemas CRISPR-Cas , RNA Guia de Sistemas CRISPR-Cas , Edição de Genes/métodos , Proteína 9 Associada à CRISPR/genética , DNA , Ribonucleoproteínas/genéticaRESUMO
The increasing advances in thermal radiation regulators have attracted growing interest, particularly in infrared sources, thermal management, and camouflage. Despite many advances in dynamic thermal emitters with great controllability, sustained external energy is required to maintain the desired emission. In this study, we present a polarization-driven thermal emission regulator based on a two-way control: i) phase change and ii) polarization tuning. Based on a conventional, non-volatile phase change material, i.e., Ge2Sb2Te5 (GST), we newly introduce an anisotropic medium for facile emissivity regulation without heat energy consumption. A rigorous coupled-wave analysis method provides design guidelines for finding optimal structural parameters. We utilized a simple glancing angle deposition process which induces tilted self-aligned nanocolumns with anisotropic properties. The fabricated sample shows polarization-sensitive thermal regulation through thermal imaging spectroscopic measurement. Additionally, we manufactured a multispectral visibly/thermally camouflaged patch that identifies encrypted information at a specific polarization state for a proof-of-concept demonstration.
RESUMO
The development of real-time and sensitive humidity sensors is in great demand from smart home automation and modern public health. We hereby proposed an ultrafast and full-color colorimetric humidity sensor that consists of chitosan hydrogel sandwiched by a disordered metal nanoparticle layer and reflecting substrate. This hydrogel-based resonator changes its resonant frequency to external humidity conditions because the chitosan hydrogels are swollen under wet state and contracted under dry state. The response time of the sensor is ~104 faster than that of the conventional Fabry-Pérot design. The origins of fast gas permeation are membrane pores created by gaps between the metal nanoparticles. Such instantaneous and tunable response of a new hydrogel resonator is then exploited for colorimetric sensors, anti-counterfeiting applications, and high-resolution displays.
RESUMO
Reconfigurable light absorbers have attracted much attention by providing additional optical responses and expanding the number of degrees of freedom in security applications. Fabry-Pèrot absorbers based on phase change materials with tunable properties can be implemented over large scales without the need for additional steps such as lithography, while exhibiting reconfigurable optical responses. However, a fundamental limitation of widely used phase change materials such as vanadium dioxide and germanium-antimony-tellurium-based chalcogenide glasses is that they have only two distinct phases; therefore, only two different states of optical properties are available. Here, we experimentally demonstrate active multilevel absorbers that are tuned by controlling the external temperature. This is produced by creating large-scale lithography-free multilayer structures with both undoped and tungsten-doped solution-processed monoclinic-phase vanadium dioxide thin films. The doping of vanadium dioxide with tungsten allows for the modulation of the phase-transition temperature, which results in an extra degree of freedom and therefore an additional step for the tunable properties. The proposed multilevel absorber is designed and characterized both numerically and experimentally. Such large-scale multilevel tunable absorbers realized with nanoparticle-based solution fabrication techniques are expected to open the way for advanced thermo-optical cryptographic devices based on tunable reflective coloration and near-infrared absorption.
RESUMO
Appendiceal mucocele is a rare mucin-producing neoplasm of appendiceal origin. Due to its location and imaging findings, appendiceal mucocele is easily confused with tumors of the right adnexa. We present a rare case of a patient initially misdiagnosed with an ovarian tumor intraoperatively diagnosed as an appendiceal mucocele and successfully treated. A 66-year-old postmenopausal woman was admitted to the gynecology department for an asymptomatic pelvic mass. Preoperative pelvic imaging showed an 8-cm cystic mass. Exploratory laparoscopy for the suspected epithelial borderline tumor from the right ovary revealed a cystic mass in the right pelvic area and normal uterus, fallopian tubes, and ovaries. Intraoperative consultation with the general surgery department confirmed the appendiceal origin. Laparoscopic appendectomy was performed. Histopathological examination confirmed a low-grade mucinous neoplasm of appendiceal origin. The patient was discharged on a postoperative day 5 without complications. The outpatient follow-up performed 1 month later showed no evidence of disease progression. Despite the use of advanced diagnostic tools, appendiceal mucocele may be confused for ovarian malignancies. Because the clinical features of appendiceal mucocele are nonspecific, clinicians and radiologists know the specific imaging findings. A multidisciplinary approach including general surgery, gynecology, and radiology is required for preoperative diagnosis and treatment.
RESUMO
We investigated whether textural parameters of peritumoral breast adipose tissue (AT) based on F-18 fluorodeoxyglucose (FDG) PET/CT could predict axillary lymph node metastasis in patients with breast cancer. A total of 326 breast cancer patients with preoperative FDG PET/CT were retrospectively enrolled. PET/CT images were visually assessed and the maximum FDG uptake of axillary lymph nodes (LN SUVmax) was measured. From peritumoral breast AT, 38 textural features of PET imaging were extracted. The diagnostic ability of PET based on visual analysis, LN SUVmax, and textural features of peritumoral breast AT for predicting axillary lymph node metastasis were assessed using the area under the receiver operating characteristic curve (AUC) values. Among the 38 peritumoral breast AT textural features, grey-level co-occurrence matrix (GLCM) entropy showed the highest AUC value (0.830) for predicting axillary lymph node metastasis. The value of GLCM entropy was higher than that of visual analysis (0.739; p < 0.05) and the AUC value was comparable to that of LN SUVmax (0.793; p > 0.05). In the subgroup analysis of patients with negative findings on visual analysis, GLCM entropy still showed a high diagnostic ability (AUC: 0.759) in predicting lymph node metastasis. The findings suggest a potential diagnostic role of PET/CT imaging features of peritumoral breast AT in predicting axillary lymph node metastasis in patients with breast cancer.
RESUMO
Flexible capacitive humidity sensors are promising for low-cost, wearable, and radio frequency identification sensors, but their nonlinear response is an important issue for practical applications. Herein, the linearity of humidity response was controlled by surface water wettability and operating frequency of sensor, and the mechanism was explained in detail by surface water condensation. For a sensor with a Ag interdigitated electrode (IDE) on a poly(ethylene terephthalate) substrate, the capacitance showed a small linear increase with humidity up to 70% RH but a large nonlinear increase in the higher range. The response linearity was increased by a hydrophobic surface treatment of self-assembled monolayer coating while it was decreased by an ultraviolet/ozone irradiation for hydrophilicity. It was also increased by increasing the frequency in the range of 1-100 kHz, more prominently on a more hydrophilic surface. Based on experiment and simulation, the increase in sensor capacitance was greatly dependent on the geometric pattern (e.g., size, number, and contact angle) and electrical permittivity of surface water droplets. A larger and more nonlinear humidity response resulted from a larger increase in the number of droplets with a smaller contact angle on a sensor surface with higher water wettability and also from a higher permittivity of water at a lower frequency.
Assuntos
Água , Eletrodos , Umidade , Interações Hidrofóbicas e Hidrofílicas , MolhabilidadeRESUMO
BACKGROUND: The present study aimed to investigate whether dual-phase F-18 sodium-fluoride (NaF) positron emission tomography/computed tomography (PET/CT) could improve the diagnostic accuracy of detecting bone metastasis in cancer patients with a solitary bone lesion compared to conventional F-18 NaF PET/CT. METHODS: We retrospectively enrolled 113 cancer patients who underwent dual-phase F-18 NaF PET/CT for the differential diagnosis of a solitary bone lesion seen on bone scintigraphy. According to the dual-phase PET/CT protocol, an early-phase scan was acquired immediately after radiotracer injection and a conventional F-18 NaF PET/CT scan was performed. The diagnostic abilities of the visual analysis of conventional and dual-phase PET/CT scans and two quantitative parameters (lesion-to-blood pool uptake ratio on early-phase scan and lesion-to-bone uptake ratio on conventional scan) for detecting bone metastasis were compared. The final diagnosis of bone metastasis was made by histopathological confirmation or follow-up imaging studies. RESULTS: A metastatic bone lesion was diagnosed in 28 patients (24.8%). The sensitivity, specificity, and accuracy were 100.0%, 70.6%, and 77.9%, respectively, for visual analysis of conventional F-18 NaF PET/CT, 92.9%, 42.4%, 54.9%, respectively, for lesion-to-bone uptake ratio, 96.4%, 88.2%, and 90.3%, respectively, for visual analysis of dual-phase PET/CT, and 92.9%, 81.2%, and 83.2%, respectively, for lesion-to-blood pool uptake ratio. Visual analysis of dual-phase PET/CT was shown to have the highest area under the receiver operating characteristic curve value (0.923; 95% CI, 0.858-0.965) among all parameters. CONCLUSIONS: Dual-phase F-18 NaF PET/CT showed a high diagnostic ability for detecting bone metastasis with improved specificity and accuracy compared to conventional F-18 NaF PET/CT in cancer patients. Dual-phase F-18 NaF PET/CT might help diagnose bone metastasis in patients with malignancies who were shown to have a solitary bone lesion on bone scintigraphy.
RESUMO
Recently, coloring based on nanostructure-light interaction has attracted much attention, because it has many advantages over pigment-based conventional coloring in terms of being non-toxic and highly durable in the environment, and providing high resolution. The asymmetric Fabry-Perot (FP) cavity absorber is the most manufacturable structure among coloring structures because it is simply produced and easily tunable. However, it cannot be applied practically because of the lack of a manufacturing technique that enables simultaneous fabrication of multi-color structures with different heights. Here, the fabrication of colored reflective characters based on various asymmetric FP absorbers with micrometer-scale pixel size are reported. Various cavities with different thicknesses are fabricated in a single step using UV imprint lithography and a simple deposition process. UV/visible spectroscopy is used to characterize the fabricated FP resonator. This absorber demonstrates high absorption, close to 90%, resulting in vivid colors with high resolution of 12700 DPI. It can be potentially used in reflective color displays field, functionalized color decorations, and security color patterns area. It is believed that this study would open up new possibilities for high density color printing in practical industry by introducing cost effective nanoimprint lithography technology.
RESUMO
Purpose: High incidence of osteoporosis has been reported in breast cancer patients due to early menopause triggered by adjuvant treatment and temporary ovarian function suppression. In this study, we sought to determine whether long-term breast cancer survivors had an elevated risk of low bone density compared to the general population. Methods: Long-term breast cancer survivors who had been treated for more than 5 years were selected for this study. Data were obtained from medical records and using a questionnaire from the Korea National Health and Nutrition Examination Survey (KNHANES). An age-matched non-cancer control group was selected from the KNHANES records. Incidence of fracture and bone mineral density (BMD) were compared between the two groups. Results: In total, 74 long-term breast cancer survivors and 296 non-cancer controls were evaluated. The incidence of fracture did not differ between the two groups (P=0.130). No differences were detected in lumbar BMD (P=0.051) following adjustment for body mass index, while hip BMD was significantly lower in breast cancer survivors (P=0.028). Chemotherapy and endocrine treatment were not related to low BMD in breast cancer survivors. In more than half of the survivors, the 10-year risk of osteoporotic fracture was less than 1%. Conclusion: Long-term breast cancer survivors had low bone density but a comparable risk of fracture compared to non-cancer age-matched controls. Further studies on the factors related to low bone density in long-term breast cancer survivors are required.
RESUMO
The colour printing technology based on interactions between geometric structures and light has various advantages over the pigment-based colour technology in terms of nontoxicity and ultrasmall pixel size. The asymmetric Fabry-Perot (F-P) cavity absorber is the simplest light-interacting structure, which can easily represent and control the colour by the thickness of the dielectric layer. However, for practical applications, an advanced manufacturing technique for the simultaneous generation of multiple reflective colours is required. In this study, we demonstrate F-P cavity absorbers with micropixels by overcoming the difficulties of multi-level pattern fabrication using a nanoimprinting approach. Our asymmetric F-P cavity absorber exhibited a high absorption (approximately 99%) in a wide visible light range upon the incorporation of lossy metallic materials, yielding vivid colours. A high-resolution image of eight different reflective colours was obtained by a one-step process. This demonstrates the potential of this technology for device applications such as high-resolution colour displays and colour patterns used for security functions.
RESUMO
BACKGROUND: Poorly differentiated neuroendocrine carcinomas (NECs) originating from the gastrointestinal (GI) tract are rare and very highly malignant disease with a poor prognosis. Poorly differentiated NECs most commonly arise in the esophagus and the large bowel; however, they may occur within virtually any portion of the GI tract. It is known, however, that they do not typically occur in the small intestine. CASE REPORT: A 21-year-old woman visited an emergency room with acute abdominal pain that commenced 2 days prior to her presentation. Thereafter, a computed tomography (CT) scan was notable for a small-intestine perforation, and huge masses were observed in the small intestine and the mesentery. The mass that was located at the ileum site is approximately 100 cm above the ileocecal (IC) valve, and while it is located on the anti-mesenteric border and it seems that luminal narrowing had occurred, an obstruction is absent. Also, a same-nature mass is on the mesentery. The pathologic reports confirmed a small-cell-type NEC with a mass size of 7.5 × 6.5 cm. The mitotic count is up to 24/10 high-power fields (HPFs), the results of the immunohistochemical stain are positive for CD56 and synaptophysin, and the Ki-67 level is 50%. %. After the operation, she was treated with Etoposide-Cisplatin (EP) chemotheraphy. Stable disease was seen during Etoposide-Cisplatin chemotheraphy. Liver metastasis was also confirmed after chemotheraphy. Additionally, Irinotecan and cisplatin were used for 3 cycles, but progression of disease, neutropenic fever, thrombocytopenia, general weakness persisted. Eventually, she died 1 year and 6 months after surgery. CONCLUSION: Ileum-located NECs are diagnosed very rarely. The most common locations for these tumors along the GI tract are the esophagus and the large intestine, but they can arise anywhere. The prognosis for NECs is poor due to the metastatic disease of most patients at the time of diagnosis. The role of adjuvant treatment requires further evaluation for the attainment of a better understanding of the overall treatment effect.
Assuntos
Carcinoma Neuroendócrino/diagnóstico , Carcinoma de Células Pequenas/diagnóstico , Neoplasias Hepáticas/secundário , Carcinoma Neuroendócrino/patologia , Feminino , Humanos , Íleo/patologia , Prognóstico , Tomografia Computadorizada por Raios X , Adulto JovemRESUMO
Structural reflective colors based on Fabry-Perot (F-P) cavity resonances have attracted tremendous interest for diverse applications, such as color decoration and printing, display, and imaging devices. However, the asymmetric F-P cavity-based reflective colors proposed to date have low color purity and have difficulty to realize a desired vivid color because of a narrow absorption band characteristic in the visible light region. Here, a solution-processed, F-P ultra-broadband light absorber is newly proposed using a high lossy nanoporous material for vivid color generation. An asymmetric metal-insulator-metal structure consists of a high lossy nanoporous metallic film with coupled silver nanocrystals (Ag NCs) as the top layer. The absorbers not only increase the maximum absorption intensity up to â¼98% but also widen the bandwidth by 300 nm, resulting in high color purity in micrometer-scale pixels. Furthermore, the solution-based absorber shows potential to realize a high-resolution display pixel and anticounterfeiting devices having mechanical flexibility using the inkjet printing technology.
RESUMO
In this work, we introduce a low cost, room-temperature and atmospheric pressure based chemical method to produce highly transparent, conductive, and flexible nano-mesh structured electrodes using Ag nanocrystals (NCs). Sequential treatments of ligand exchange and reduction processes were developed to engineer the optoelectronic properties of Ag NC thin films. Combinatorial analysis indicates that the origin of the relatively low conductivity comes from the non-metallic compounds that are introduced during ligand exchange. The reduction process successfully removed these non-metallic compounds, yielding structurally uniform, optically more transparent, dispersive, and electrically more conductive thin films. We optimized the design of Ag NC thin film mesh structures, and achieved low sheet resistance (9.12 Ω â¡-1), high optical transmittance (94.7%), and the highest figure of merit (FOM) of 6.37 × 10-2. Solution processed flexible transparent heaters, touch pads, and wearable sensors are demonstrated, emphasizing the potential applications of Ag NC transparent electrodes in multifunctional sensors and devices.
RESUMO
We developed a simple and systematic method to fabricate optically tunable and thermally and chemically stable Au-Ag nanocrystal-based plasmonic metamaterials. An Ag nanocrystal-based metamaterial with desirable optical properties was fabricated via nanoimprinting and ligand-exchange process. Its optical properties were controlled by selectively substituting Ag atoms with Au atoms through a spontaneous galvanic replacement reaction. The developed Au-Ag-based metamaterials provide excellent tunable plasmonic properties required for various applications in the visible and near-infrared regions by controlling the Au-Ag composition according to the conditions of the galvanic displacement. Furthermore, their thermal and chemical stabilities significantly improved because of the protective Au thin layer on the surface. Using this developed process, chemically and thermally stable and flexible plasmonic metamaterials were successfully fabricated on a flexible polyester terephthalate substrate.
RESUMO
We demonstrate the fabrication of hierarchical materials by controlling the structure of highly ordered binary nanocrystal superlattices (BNSLs) on multiple length scales. Combinations of magnetic, plasmonic, semiconducting, and insulating colloidal nanocrystal (NC) building blocks are self-assembled into BNSL membranes via the liquid-interfacial assembly technique. Free-standing BNSL membranes are transferred onto topographically structured poly(dimethylsiloxane) molds via the Langmuir-Schaefer technique and then deposited in patterns onto substrates via transfer printing. BNSLs with different structural motifs are successfully patterned into various meso- and microstructures such as lines, circles, and even three-dimensional grids across large-area substrates. A combination of electron microscopy and grazing incidence small-angle X-ray scattering (GISAXS) measurements confirm the ordering of NC building blocks in meso- and micropatterned BNSLs. This technique demonstrates structural diversity in the design of hierarchical materials by assembling BNSLs from NC building blocks of different composition and size by patterning BNSLs into various size and shape superstructures of interest for a broad range of applications.
RESUMO
This study reports the preparation of disposable microcolumns with welded metal frits for the first time. First, the bottom of glass-lined stainless-steel tubing of 30 cm length, 1.6 mm od, and 0.5 mm id was welded with a stainless-steel screen frit of 1.6 mm diameter. A micro-welding machine was used for this. Next, the column was connected to a slurry packer and packed with porous silica particles. Then, the inlet of the column was carefully welded with another frit. The column was tested for separation of a test mix composed of phenol, 2-nitrophenol, acetophenone, aceanilide, and benzamide. Another column of the same physical dimension was also prepared with frits that were not welded to the column. The chromatographic performances of the two groups of columns (welded frits versus non-welded frits) were examined. The columns of welded frits showed ca. 18% better separation efficiency (number of theoretical plates) than those of non-welded frits.
RESUMO
Herein we describe a room-temperature, chemical process to transform silver nanocrystal solids, deposited from colloidal solutions, into highly conductive, corrosion-resistant, optical and electronic materials with nanometer-scale architectures. After assembling the nanocrystal solids, we treated them with a set of simple, compact, organic and inorganic reagents: ammonium thiocyanate, ammonium chloride, potassium hydrogen sulfide, and ethanedithiol. We find that each reagent induces unique changes in the structure and composition of the resulting solid, giving rise to films that vary from insulating to, in the case of thiocyanate, conducting with a remarkably low resistivity of 8.8×10(-6) Ω·cm, only 6 times that of bulk silver. We show that thiocyanate mediates the spontaneous sintering of nanocrystals into structures with a roughness of less than 1/10th of the wavelength of visible light. We demonstrate that these solution-processed, low-resistivity, optically smooth films can be patterned, using imprint lithography, into conductive electrodes and plasmonic mesostructures with programmable resonances. We observe that thiocyanate-treated solids exhibit significantly retarded atmospheric corrosion, a feature that dramatically increases the feasibility of employing silver for electrical and plasmonic applications.