Alternative adsorbents applied to the removal of natural hormones from pig farming effluents and characterization of the biofertilizer.

Pig farming has a very strong economic importance in Brazil. The residues from this activity are applied to the soil because of their excellent characteristics as biofertilizers. The present study aimed at studying the estrone, 17ß-estradiol, and estriol natural hormones, emerging contaminants present in this type of residue that are not mentioned in the current legislation. The characterization of the pig farming effluent presented high concentrations of hormones (mg L-1). The objective was to apply the biosorbents to the removal of the hormones in batch systems directly in the manure heaps without affecting the potential of the effluent as a fertilizer. It was verified that the adsorption of hormones using the rice husk biomass in natura and soybean hull in natura, abundant alternative adsorbents, presented a good capacity of removal of hormones. The presence of the organic materials (rice husk and soybean hull) caused few alterations in the biofertilizer characteristics, demonstrating that these adsorbents present a potential of application in batch treatment systems, with possible applications related to pig farming effluents containing natural hormones.

Adsorption of reactive blue BF-5G dye by soybean hulls: kinetics, equilibrium and influencing factors.

The textile industry is known for the high use of chemicals, such as dyes, and large volumes of effluent that contaminate waters, a fact that has encouraged research and improved treatment techniques. In this study, we used unprocessed soybean hulls for the removal of reactive blue BF-5G dye. The point of zero charge of soybean hulls was 6.76. Regarding the speed of agitation in the adsorption process, the resistance to mass transfer that occurs in the boundary layer was eliminated at 100 rpm. Kinetics showed an experimental amount of dye adsorbed at equilibrium of 57.473 mg g(-1) obtained under the following conditions: dye initial concentration = 400 mg L(-1); diameter of particle = 0.725 mm; dosage = 6 g L(-1); pH 2; 100 rpm; temperature = 30 °C; and duration of 24 hours. The pseudo-second order best showed the dye removal kinetics. The adsorption isotherms performed at different temperatures (20, 30, 40 and 50 °C) showed little variation in the concentration range assessed, being properly adjusted by the Langmuir isotherm model. The maximum capacity of dye adsorption was 72.427 mg g(-1) at 30 °C. Since soybean hull is a low-cost industrial byproduct, it proved to be a potential adsorbent for the removal of the textile dye assessed.