Future Exploration of the Outer Heliosphere and Very Local Interstellar Medium by Interstellar Probe.

A detailed overview of the knowledge gaps in our understanding of the heliospheric interaction with the largely unexplored Very Local Interstellar Medium (VLISM) are provided along with predictions of with the scientific discoveries that await. The new measurements required to make progress in this expanding frontier of space physics are discussed and include in-situ plasma and pick-up ion measurements throughout the heliosheath, direct sampling of the VLISM properties such as elemental and isotopic composition, densities, flows, and temperatures of neutral gas, dust and plasma, and remote energetic neutral atom (ENA) and Lyman-alpha (LYA) imaging from vantage points that can uniquely discern the heliospheric shape and bring new information on the interaction with interstellar hydrogen. The implementation of a pragmatic Interstellar Probe mission with a nominal design life to reach 375 Astronomical Units (au) with likely operation out to 550 au are reported as a result of a 4-year NASA funded mission study.

Calibration of polyvinylidene fluoride based dust detectors in response to varying grain density and incidence angle.

Permanently polarized Polyvinylidene Fluoride (PVDF) films have been used on a variety of spacecraft as in situ dust detectors to measure the size and spatial distributions of micron and sub-micron dust particles. The detectors produce a short electric pulse when impacted by a hypervelocity dust particle. The pulse amplitude depends on the mass and relative speed of the dust grain. This relationship has been studied both empirically and numerically to better understand the film's principle of operation, as well as the effects of film thickness, film temperature, and particle penetration depth. However, little work has been done to constrain the effects of varying particle density and incidence angle despite the frequent occurrence of such configurations in most space-based applications. We present calibrations of non-penetrating impacts on 28 µm thick films at varying incidence angles ranging from 0° to 75° for iron and aluminum particles in the mass and speed range of 10-12 ≤ m ≤ 10-8 g and 0.5 ≤ v ≤ 7 km/s, respectively. The study was carried out at the 3 MV dust accelerator laboratory at the University of Colorado at Boulder. The results show that PVDF signals are largely independent of particle density and incidence angle up to 75° for non-penetrating impacts.

Color, composition, and thermal environment of Kuiper Belt object (486958) Arrokoth.

The outer Solar System object (486958) Arrokoth (provisional designation 2014 MU69) has been largely undisturbed since its formation. We studied its surface composition using data collected by the New Horizons spacecraft. Methanol ice is present along with organic material, which may have formed through irradiation of simple molecules. Water ice was not detected. This composition indicates hydrogenation of carbon monoxide-rich ice and/or energetic processing of methane condensed on water ice grains in the cold, outer edge of the early Solar System. There are only small regional variations in color and spectra across the surface, which suggests that Arrokoth formed from a homogeneous or well-mixed reservoir of solids. Microwave thermal emission from the winter night side is consistent with a mean brightness temperature of 29 ± 5 kelvin.

The geology and geophysics of Kuiper Belt object (486958) Arrokoth.

The Cold Classical Kuiper Belt, a class of small bodies in undisturbed orbits beyond Neptune, is composed of primitive objects preserving information about Solar System formation. In January 2019, the New Horizons spacecraft flew past one of these objects, the 36-kilometer-long contact binary (486958) Arrokoth (provisional designation 2014 MU69). Images from the flyby show that Arrokoth has no detectable rings, and no satellites (larger than 180 meters in diameter) within a radius of 8000 kilometers. Arrokoth has a lightly cratered, smooth surface with complex geological features, unlike those on previously visited Solar System bodies. The density of impact craters indicates the surface dates from the formation of the Solar System. The two lobes of the contact binary have closely aligned poles and equators, constraining their accretion mechanism.

Using dust shed from asteroids as microsamples to link remote measurements with meteorite classes.

Given the compositional diversity of asteroids, and their distribution in space, it is impossible to consider returning samples from each one to establish their origin. However, the velocity and molecular composition of primary minerals, hydrated silicates, and organic materials can be determined by in situ dust detector instruments. Such instruments could sample the cloud of micrometer-scale particles shed by asteroids to provide direct links to known meteorite groups without returning the samples to terrestrial laboratories. We extend models of the measured lunar dust cloud from LADEE to show that the abundance of detectable impact-generated microsamples around asteroids is a function of the parent body radius, heliocentric distance, flyby distance, and speed. We use Monte Carlo modeling to show that several tens to hundreds of particles, if randomly ejected and detected during a flyby, would be a sufficient number to classify the parent body as an ordinary chondrite, basaltic achondrite, or other class of meteorite. Encountering and measuring microsamples shed from near-Earth and Main Belt asteroids, coupled with complementary imaging and multispectral measurements, could accomplish a thorough characterization of small, airless bodies.

Pluto's Interaction With Energetic Heliospheric Ions.

Pluto energies of a few kiloelectron volts and suprathermal ions with tens of kiloelectron volts and above. We measure this population using the Pluto Energetic Particle Spectrometer Science Investigation (PEPSSI) instrument on board the New Horizons spacecraft that flew by Pluto in 2015. Even though the measured ions have gyroradii larger than the size of Pluto and the cross section of its magnetosphere, we find that the boundary of the magnetosphere is depleting the energetic ion intensities by about an order of magnitude close to Pluto. The intensity is increasing exponentially with distance to Pluto and reaches nominal levels of the interplanetary medium at about 190R P distance. Inside the wake of Pluto, we observe oscillations of the ion intensities with a periodicity of about 0.2 hr. We show that these can be quantitatively explained by the electric field of an ultralow-frequency wave and discuss possible physical drivers for such a field. We find no evidence for the presence of plutogenic ions in the considered energy range.

Pluto's interaction with its space environment: Solar wind, energetic particles, and dust.

The New Horizons spacecraft carried three instruments that measured the space environment near Pluto as it flew by on 14 July 2015. The Solar Wind Around Pluto (SWAP) instrument revealed an interaction region confined sunward of Pluto to within about 6 Pluto radii. The region's surprisingly small size is consistent with a reduced atmospheric escape rate, as well as a particularly high solar wind flux. Observations from the Pluto Energetic Particle Spectrometer Science Investigation (PEPSSI) instrument suggest that ions are accelerated and/or deflected around Pluto. In the wake of the interaction region, PEPSSI observed suprathermal particle fluxes equal to about 1/10 of the flux in the interplanetary medium and increasing with distance downstream. The Venetia Burney Student Dust Counter, which measures grains with radii larger than 1.4 micrometers, detected one candidate impact in ±5 days around New Horizons' closest approach, indicating an upper limit of <4.6 kilometers(-3) for the dust density in the Pluto system.

Dust observations at orbital altitudes surrounding Mars.

Dust is common close to the martian surface, but no known process can lift appreciable concentrations of particles to altitudes above ~150 kilometers. We present observations of dust at altitudes ranging from 150 to above 1000 kilometers by the Langmuir Probe and Wave instrument on the Mars Atmosphere and Volatile Evolution spacecraft. Based on its distribution, we interpret this dust to be interplanetary in origin. A comparison with laboratory measurements indicates that the dust grain size ranges from 1 to 12 micrometers, assuming a typical grain velocity of ~18 kilometers per second. These direct observations of dust entering the martian atmosphere improve our understanding of the sources, sinks, and transport of interplanetary dust throughout the inner solar system and the associated impacts on Mars's atmosphere.

A permanent, asymmetric dust cloud around the Moon.

Interplanetary dust particles hit the surfaces of airless bodies in the Solar System, generating charged and neutral gas clouds, as well as secondary ejecta dust particles. Gravitationally bound ejecta clouds that form dust exospheres were recognized by in situ dust instruments around the icy moons of Jupiter and Saturn, but have hitherto not been observed near bodies with refractory regolith surfaces. High-altitude Apollo 15 and 17 observations of a 'horizon glow' indicated a putative population of high-density small dust particles near the lunar terminators, although later orbital observations yielded upper limits on the abundance of such particles that were a factor of about 10(4) lower than that necessary to produce the Apollo results. Here we report observations of a permanent, asymmetric dust cloud around the Moon, caused by impacts of high-speed cometary dust particles on eccentric orbits, as opposed to particles of asteroidal origin following near-circular paths striking the Moon at lower speeds. The density of the lunar ejecta cloud increases during the annual meteor showers, especially the Geminids, because the lunar surface is exposed to the same stream of interplanetary dust particles. We expect all airless planetary objects to be immersed in similar tenuous clouds of dust.

Electromagnetic particle-in-cell simulations of the solar wind interaction with lunar magnetic anomalies.

We present the first three-dimensional fully kinetic and electromagnetic simulations of the solar wind interaction with lunar crustal magnetic anomalies (LMAs). Using the implicit particle-in-cell code iPic3D, we confirm that LMAs may indeed be strong enough to stand off the solar wind from directly impacting the lunar surface forming a mini-magnetosphere, as suggested by spacecraft observations and theory. In contrast to earlier magnetohydrodynamics and hybrid simulations, the fully kinetic nature of iPic3D allows us to investigate the space charge effects and in particular the electron dynamics dominating the near-surface lunar plasma environment. We describe for the first time the interaction of a dipole model centered just below the lunar surface under plasma conditions such that only the electron population is magnetized. The fully kinetic treatment identifies electromagnetic modes that alter the magnetic field at scales determined by the electron physics. Driven by strong pressure anisotropies, the mini-magnetosphere is unstable over time, leading to only temporal shielding of the surface underneath. Future human exploration as well as lunar science in general therefore hinges on a better understanding of LMAs.

Development of the nano-dust analyzer (NDA) for detection and compositional analysis of nanometer-size dust particles originating in the inner heliosphere.

A linear time-of-flight mass spectrometer is developed for the detection and chemical analysis of nanometer-sized particles originating near the Sun. Nano-dust particles are thought to be produced by mutual collisions between interplanetary dust particles slowly spiraling toward the Sun and are accelerated outward to high velocities by interaction with the solar wind plasma. The WAVES instruments on the two STEREO spacecraft reported the detection, strong temporal variation, and potentially high flux of these particles. Here we report on the optimization and the results from the detailed characterization of the instrument's performance using submicrometer sized dust particles accelerated to 8-60 km/s. The Nano Dust Analyzer (NDA) concept is derived from previously developed detectors. It has a 200 cm(2) effective target area and a mass resolution of approximately m/Δm = 50. The NDA instrument is designed to reliably detect and analyze nanometer-sized dust particles while being pointed close to the Sun's direction, from where they are expected to arrive. Measurements by such an instrument will determine the size-dependent flux of the nano-dust particles and its variations, it will characterize the composition of the nano-dust and, ultimately, it may determine their source. The flight version of the NDA instrument is estimated to be <5 kg and requires <10 W for operation.

Effect of filament supports on emissive probe measurements.

We have constructed an emissive probe with a thin tungsten filament spot-welded across two nickel wires insulated with ceramic paint. We show that the ceramic supports covering the nickel wires have a large effect on the potential measurements in low-density plasmas. It is found that the potential measured by the emissive probe is more negative than the potential derived from a Langmuir probe current-voltage (I-V) characteristic curve when the plasma density is so low that the emitting filament remains immersed in the sheaths of the ceramic supports. The length of the filament L needs to be larger than about 2 Debye lengths (L > 2λ(De)) in order to avoid the influence of the ceramic supports and to achieve reliable plasma potential measurements using emissive probes.

Dust trajectory sensor: accuracy and data analysis.

The Dust Trajectory Sensor (DTS) instrument is developed for the measurement of the velocity vector of cosmic dust particles. The trajectory information is imperative in determining the particles' origin and distinguishing dust particles from different sources. The velocity vector also reveals information on the history of interaction between the charged dust particle and the magnetospheric or interplanetary space environment. The DTS operational principle is based on measuring the induced charge from the dust on an array of wire electrodes. In recent work, the DTS geometry has been optimized [S. Auer, E. Grün, S. Kempf, R. Srama, A. Srowig, Z. Sternovsky, and V Tschernjawski, Rev. Sci. Instrum. 79, 084501 (2008)] and a method of triggering was developed [S. Auer, G. Lawrence, E. Grün, H. Henkel, S. Kempf, R. Srama, and Z. Sternovsky, Nucl. Instrum. Methods Phys. Res. A 622, 74 (2010)]. This article presents the method of analyzing the DTS data and results from a parametric study on the accuracy of the measurements. A laboratory version of the DTS has been constructed and tested with particles in the velocity range of 2-5 km/s using the Heidelberg dust accelerator facility. Both the numerical study and the analyzed experimental data show that the accuracy of the DTS instrument is better than about 1% in velocity and 1° in direction.

Polyvinylidene fluoride dust detector response to particle impacts.

Polyvinylidene fluoride (PVDF) dust detectors have flown on many space missions since their first use on the Vega 1 and 2 spacecraft. The fundamental operating principle of these detectors is the production of a charge upon impact by a hypervelocity dust particle. This measured signal, N, depends on the speed, v, and mass, m, of the particle. The relationship between N, v, and m was first empirically derived by Simpson and Tuzzolino. All of the PVDF dust instruments prior to the Student Dust Counter on the New Horizons mission use their formula for the calibration of the detectors. This paper provides additional dust impact calibration data, proposes a modification in the exponents for m and v, and investigates the relationship between detector temperature and detector signal.

Large area mass analyzer instrument for the chemical analysis of interstellar dust particles.

A new instrument to analyze the chemical composition of dust particles in situ in space has been developed. The large target area ( approximately 0.2 m(2)) makes this instrument well suited for detecting a statistically significant number of interstellar dust grains or other dust particles with a low flux. The device is a reflectron-type time-of-flight mass spectrometer that uses only flat electrodes for the generation of the parabolic potential. The instrument analyzes the ions from the impact generated plasma due to hypervelocity dust impacts onto a solid target surface. The SIMION ion optics software package is used to investigate different potential field configurations and optimize the mass resolution and focusing of the ions. The cylindrically symmetric instrument operates with six ring electrodes and six annular electrodes biased to different potentials to create the potential distribution of the reflectron. The laboratory model of the instrument has been fabricated and tested. Hypervelocity dust impacts are simulated by laser ablation using a frequency doubled Nd:YAG laser with approximately 8 ns pulse length. The experimental data show typical mass resolution m/Deltam approximately 200.

Saturn's spokes: lost and found.

The spokes are intermittently appearing radial markings in Saturn's B ring that are believed to form when micrometer-sized dust particles are levitated above the ring by electrostatic forces. First observed by the Voyagers, the spokes disappeared from October 1998 until September 2005, when the Cassini spacecraft saw them reappear. The trajectories of the charged dust particles comprising the spokes depend critically on the background plasma density above the rings, which is a function of the solar elevation angle. Because the rings are more open to the Sun now than when Voyager flew by, the charging environment above the rings has prevented the formation of spokes until very recently. We show that this notable effect is capable of stopping spoke formation entirely and restricting the size of the particles in the spokes.

Distinct behavior of mutant triosephosphate isomerase in hemolysate and in isolated form: molecular basis of enzyme deficiency.

In a Hungarian family with severe decrease in triosephosphate isomerase (TPI) activity, 2 germ line-identical but phenotypically differing compound heterozygote brothers inherited 2 independent (Phe240Leu and Glu145stop codon) mutations. The kinetic, thermodynamic, and associative properties of the recombinant human wild-type and Phe240Leu mutant enzymes were compared with those of TPIs in normal and deficient erythrocyte hemolysates. The specific activity of the recombinant mutant enzyme relative to the wild type was much higher (30%) than expected from the activity (3%) measured in hemolysates. Enhanced attachment of mutant TPI to erythrocyte inside-out vesicles and to microtubules of brain cells was found when the binding was measured with TPIs in hemolysate. In contrast, there was no difference between the binding of the recombinant wild-type and Phe240Leu mutant enzymes. These findings suggest that the missense mutation by itself is not enough to explain the low catalytic activity and "stickiness" of mutant TPI observed in hemolysate. The activity of the mutant TPI is further reduced by its attachment to inside-out vesicles or microtubules. Comparative studies of the hemolysate from a British patient with Glu104Asp homozygosity and with the platelet lysates from the Hungarian family suggest that the microcompartmentation of TPI is not unique for the hemolysates from the Hungarian TPI-deficient brothers. The possible role of cellular components, other than the mutant enzymes, in the distinct behavior of TPI in isolated form versus in hemolysates from the compound heterozygotes and the simple heterozygote family members is discussed.

Study of hepatitis C virus infection in 213 Hungarian patients with Sjögren's syndrome.

In the current study we investigated 213 randomly selected Hungarian patients diagnosed with primary Sjögren's syndrome (SS). All patients were monitored for hepatitis C virus (HCV) infection and 13 were positive. We compared HCV-negative and -positive patients and made observations on how HCV infection alters the clinical and laboratory features of Sjögren's syndrome. On the basis of these findings, we conclude that HCV infection is more frequent in Hungarian SS patients than in the normal population and that the presence of this virus has a disease-modifying effect on SS.

The detection of hepatitis C virus in South Hungary.

BACKGROUND: More than 100 million people are infected with hepatitis C virus (HCV) worldwide. The prevalence of HCV infection varies from country to country and the natural history of hepatitis C infection is not well understood. OBJECTIVES: The prevalence of anti-HCV positive blood donors in South Hungary was determined. Potential risk factors of HCV transmission were investigated and compared to anti-HCV-negative blood donors. Furthermore, the rate of anti-HCV positivity in children who had received one or more blood transfusions prior to the implementation of anti-HCV blood donor screening was evaluated. STUDY DESIGN: A total of 45719 blood donors and 120 children were tested for the presence of anti-HCV antibodies by second- and third-generation enzyme immunoassays. Positive results were confirmed by a recombinant immunoblot assay. Data on potential sources of HCV transmission were obtained by interviews. RESULTS: Among blood donors, the rate of confirmed HCV antibody-positives was 0.4% (195 of 45719 donors). Previous surgery, transfusion, more than three pregnancies, and tattoos were significantly correlated with confirmed anti-HCV positivity. Two of 120 children (1.7%) were confirmed anti-HCV positives. In both of them, serum HCV RNA could be detected. CONCLUSIONS: The prevalence of anti-HCV positive blood donors in South Hungary is low. Nosocomial infections and tattooing were found to be the most important risk factors for transmission of HCV. Because of the low prevalence of anti-HCV positive blood donors, only a small number of children, who received blood transfusions prior to the implementation of anti-HCV blood donor screening, are infected with HCV.