Encapsulation of grape seed oil in oil-in-water emulsion using multilayer technology: Investigation of physical stability, physicochemical and oxidative properties of emulsions under the influence of the number of layers.

Many studies have shown that grape seed oil (GSO) is one of the vegetable fats that are plentiful in essential fatty acids and can be used as a fat substitute or to modify fat in food products to reduce saturated fatty acids. However, due to its low solubility and high sensitivity to oxidation, it is necessary to develop delivery systems that can distribute GSO in food more effectively. Recently, the preparation of emulsions using the layer-by-layer (LBL) method has many advantages in delivering lipid-soluble functional compounds. This research was used to check the formation of GSO oil-loaded primary, secondary and tertiary multilayer emulsions stabilized by mixture of anionic gelatin, cationic chitosan, and anionic basil seed gum (BSG) as the aqueous phase at pH 5, prepared using a layer-by-layer electrostatic deposition technique. Multilayer emulsions prepared by GSO and a mixture of gelatin, chitosan, and BSG as the aqueous phase at pH 5. Finally, the effect of the number of layers on the physicochemical properties (particle size, viscosity, turbidity, refractive index, and physical stability) and oxidative stability (peroxide value, thiobarbituric acid value, and fatty acid profile) during the storage time (30 days) at two temperatures 25 °C & 4 °C was investigated. Also, the zeta potential and Fourier transform infrared spectroscopy (FTIR) of mono-layer and multi-layer emulsions were investigated. The results revealed that by increasing the number of layers of multi-layer emulsion of GSO, the stability has improved. Thus, the tertiary emulsion has been more effective than the other two emulsions in maintaining the physicochemical characteristics and stability over time (P < 0.001). Morphological characterization and FTIR spectroscopy results confirmed that gelatin, chitosan, and BSG were successfully loaded into the LBL emulsions. This study can improve the original percept of multilayer emulsions and promulgate their potential applications for the entire encapsulation of essential fatty acids to enrich and prevent peroxide attack.

Potential prebiotic and antibacterial activities of fucoidan from Laminaria japonica.

Fucoidan from Laminaria japonica became sterilized with an autoclave and ultraviolet (UV) radiation. Potential prebiotic and antibacterial activities of sterilized fucoidans (SF) were the subject of investigation. Molecular weight, monosaccharide composition, FTIR, and NMR spectra of SF underwent evaluations to elucidate the relationship between the structure and activities of SF. The growth of Lactobacillus rhamnosus GG and L. acidophilus with autoclave sterilized fucoidan (ASF) and the growth of L. plantarum, L. gasseri, L. paracasei, and L. reuteri with UV sterilized fucoidan (USF) increased significantly. Also, fucoidan was vastly more effective than fructooligosaccharides in improving the growth of L. gasseri, L. reuteri, and L. paracasei. The growth of Escherichia coli and Bacillus cereus decreased at each SF concentration. ASF was more effective against E. coli, B. cereus, and Staphylococcus aureus than the USF efficiency. However, USF exhibited more inhibitory effects on the growth of Enterobacteriaceae compared to the ASF efficiency. When comparing the ASF and USF, autoclave caused a considerable decrease in molecular weight and uronic acid content, increased fucose and galactose, and made no significant changes in NMR spectra. Fucoidan effectively promoted probiotic bacterial growth and reduced pathogenic outbreaks in the medium. Therefore, it can occur as a new algal prebiotic and antibacterial agent.

Application of electrospinning to fabricate phycocyanin- and Spirulina extract-loaded gliadin fibers for active food packaging.

This study explored the active food packaging application of phycocyanin- and Spirulina extract-loaded gliadin electrospun fibers (GPhy and GSPE5%). SEM findings confirmed that the morphology of fibers was tubular, showing the GPhy and GSPE5% as the optimum fibers. The loading efficiencies of GPhy and GSPE5% were also around 90%, which proved the well-incorporated compounds within the fibers. Simulation results of α-gliadin dissolved in acetic acid illustrated the denaturation of the protein. FTIR and TGA confirmed that after electrospinning the chemical/structural changes and enhanced thermostabilities occurred, respectively. Antibacterial and antioxidant tests detected higher bactericidal and antioxidative effects of GSPE5% than GPhy. In the application part, it was found that GPhy and GSPE5% were able to decrease PV and TBA values as the indications of walnut kernels' protection from lipid oxidation. This work shows a facile and an efficient way to fabricate active food packaging materials using electrospinning and natural compounds.

Alginate/whey protein isolate-based emulgel as an alternative margarine replacer in processed cheese: Impact on rheological, mechanical, nutritional, and sensory characteristics.

Effects of partial or full replacement of margarine by alginate/whey protein isolate-based olive oil emulgel (E) on nutritional, physicochemical, mechanical, and rheological properties of processed cheese (PC) were investigated in this work. All formulated samples had the same amount of total fat, dry matter, and pH. According to the results of the fatty acids profile, the processed cheese sample in which the margarine was fully replaced by the emulgel (EPC100) had the highest (49.84%) oleic acid content and showed a reduction of 23.7% in saturated fatty acids compared with the control sample (EPC0: formulated just with margarine). EPC0 had the highest hardness among various cheese samples, which was also confirmed by its compact microstructure. Dynamic oscillatory measurements revealed that EPC100 had the highest crossover strain (or resistance to deformation). The high rigidity of this sample was related to the 3-dimensional structure of emulgel. According to the creep test results, EPC100 showed the lowest relative recovery (flowability). A high temperature-dependency of viscoelastic moduli was observed in EPC0 at 42°C. No significant differences were observed between color attributes and sensory properties of various cheese samples. Alginate/WPI-based olive oil emulgel can be considered as a healthy margarine replacer in processed cheese.

An Updated Comprehensive Overview of Different Food Applications of W1/O/W2 and O1/W/O2 Double Emulsions.

Double emulsions (DEs) present promising applications as alternatives to conventional emulsions in the pharmaceutical, cosmetic, and food industries. However, most review articles have focused on the formulation, preparation approaches, physical stability, and release profile of encapsulants based on DEs, particularly water-in-oil-in-water (W1/O/W2), with less attention paid to specific food applications. Therefore, this review offers updated detailed research advances in potential food applications of both W1/O/W2 and oil-in-water-in-oil (O1/W/O2) DEs over the past decade. To this end, various food-relevant applications of DEs in the fortification; preservation (antioxidant and antimicrobial targets); encapsulation of enzymes; delivery and protection of probiotics; color stability; the masking of unpleasant tastes and odors; the development of healthy foods with low levels of fat, sugar, and salt; and design of novel edible packaging are discussed and their functional properties and release characteristics during storage and digestion are highlighted.

The potential of postharvest zinc treatment for preservation of pomegranate aril quality.

A short shelf life usually limits the distribution and supply of pomegranate arils. Since zinc (Zn) has an indispensable role in the nutrient integrity of our diet and is effective in suppressing pathogens, this study was done as two separate experiments of pre-harvest spraying and postharvest dipping of arils with two zinc supplements, including nano zinc oxide (nZnO) and zinc sulfate (ZnSO4). The optimized concentration of both sources was used in the experiment. The pre-harvest treatment failed to extend the shelf life of arils, and, ultimately, the arils decayed after 15 days. However, the postharvest zinc treatment significantly (P < 0.01) affected all measured indices. Also, zinc sulfate was more effective than nZnO. Zn uptake was higher in postharvest treatments because exogenous Zn was in direct contact with the aril surface. After dissolving in water, Zn ions in sulfate bind to the membrane of microorganisms and thus delay cell division and microbial growth cycle. The solubility of zinc oxide nanoparticles in water is poor. Using the ZnSO4 treatment (0.8%W/V) effectively maintained the values of titratable acidity (TA), total phenolic content (TPC), total soluble solids (TSS), anthocyanin content, and antioxidant activity. Also, this treatment significantly controlled weight loss in the arils.

Exploiting Apical Sodium-Dependent Bile Acid Transporter (ASBT)-Mediated Endocytosis with Multi-Functional Deoxycholic Acid Grafted Alginate Amide Nanoparticles as an Oral Insulin Delivery System.

OBJECTIVE: Oral administration of insulin is a potential candidate for managing diabetes. However, it is obstructed by the gastrointestinal tract barriers resulting in negligible oral bioavailability. METHODS: This investigation presents a novel nanocarrier platform designed to address these challenges. In this regard, the process involved amination of sodium alginate by ethylene diamine, followed by its conjugation with deoxycholic acid. RESULTS: The resulting DCA@Alg@INS nanocarrier revealed a significantly high insulin loading content of 63.6 ± 1.03% and encapsulation efficiency of 87.6 ± 3.84%, with a particle size of 206 nm and zeta potentials of -3 mV. In vitro studies showed sustained and pH-dependent release profiles of insulin from nanoparticles. In vitro cellular studies, confocal laser scanning microscopy and flow cytometry analysis confirmed the successful attachment and internalization of DCA@Alg@INS nanoparticles in Caco-2 cells. Furthermore, the DCA@Alg@INS demonstrated a superior capacity for cellular uptake and permeability coefficient relative to the insulin solution, exhibiting sixfold and 4.94-fold enhancement, respectively. According to the uptake mechanism studies, the results indicated that DCA@Alg@INS was mostly transported through an energy-dependent active pathway since the uptake of DCA@Alg@INS by cells was significantly reduced in the presence of NaN3 by ~ 92% and at a low temperature of 4°C by ~ 94%. CONCLUSIONS: Given the significance of administering insulin through oral route, deoxycholic acid-modified alginate nanoparticles present a viable option to surmount various obstacles presented by the gastrointestinal.

A novel strategy for simultaneous reduction of salt and animal fat in burger using a taste contrast system based on double emulsion.

The work investigated a taste contrast strategy to reduce the salt content in burgers by a novel design of water in gelled oil in water double emulsion (DE) as an animal fat replacer. Oleogelation reduced the particle size and improved emulsion viscosity, resulting in more emulsion stability than conventional DE. Moreover, oil gelation enhanced the encapsulation efficiency of salt. The partial substitution of the optimized DE incorporating salt within the W1 and cinnamaldehyde within the oil phase with animal fat in the burger successfully reduced salt content by up to 25% while maintaining the desired level of saltiness. The presence of cinnamaldehyde also increased oxidative stability and decreased color changes during storage. The replacement of DE and oleogel in burgers diminished cooking loss, while negatively affected the textural properties. Therefore, further optimization of this strategy could lead to healthier food formulations with reduced fat and salt content.

The internal aqueous phase gelation improves the viability of probiotic cells in a double water/oil/water emulsion system.

This research studied the viability of probiotic bacterium Lactobacillus plantarum (L. plantarum) encapsulated in the internal aqueous phase (W 1) of a water-in-oil-in-water (W 1/O/W 2) emulsion system, with the help of gelation and different gelling agents. Additionally, the physicochemical, rheological, and microstructural properties of the fabricated emulsion systems were assessed over time under the effect of W 1 gelation. The average droplet size and zeta potential of the control system and the systems fabricated using gelatin, alginate, tragacanth gum, and carrageenan were 14.7, 12.0, 5.1, 6.4, and 7.3 µm and - 21.1, -34.1, -46.2, -38.3, and -34.7 mV, respectively. The results showed a significant increase in the physical stability of the system and encapsulation efficiency of L. plantarum after the W 1 gelation. The internal phase gelation significantly increased the viability of bacteria against heat and acidic pH, with tragacanth gum being the best gelling agent for increasing the viability of L. plantarum (28.05% and 16.74%, respectively). Apparent viscosity and rheological properties of emulsions were significantly increased after the W 1 gelation, particularly in those jellified with alginate. Overall, L. plantarum encapsulation in W 1/O/W 2 emulsion, followed by the W 1 gelation using tragacanth gum as the gelling agent, could increase both stability and viability of this probiotic bacteria.

Fabrication and study on dually modified starch embedded in alginate hydrogel as an encapsulation system for Satureja essential oil.

This study aimed to investigate how the types and order of modifications influence the structure and physicochemical characteristics of modified porous starch. The work focuses on the encapsulation of essential oil in hydrophobic microcapsules embedded in sodium alginate hydrogels. FTIR spectra indicated successful esterification of starch with OSA. 1047:1022 cm-1 and 1022:995 cm-1 band ratios of FTIR spectra revealed increased crystallinity due to enzymatic modification, supported by XRD patterns. Porous-OSA (PO) starch had 1.5 times higher degree of substitution (DS) than OSA-porous (OP) starch, confirmed by the intense peak at 0.85 ppm in 1H NMR spectra. SEM images displayed larger particles and smaller pore diameter in OP compared to PO and porous starch, indicating amylolytic enzyme inhibition by OSA. Loading efficiency (LE) showed no significant difference between OP and PO microcapsules (≈70 %), both significantly higher other starch microcapsules. OP and PO microcapsules exhibited sustained release, with enhanced antibacterial activity. Alginate hydrogels preserved about 60 % antioxidant and 90 % antibacterial activities of SEO against 2 h of UV radiation. These findings suggest that the order of modification could not affect the functional properties of final microcapsules. Additionally, the importance of alginate hydrogels as the protective and second wall material was disclosed.

Promising application of probiotic microorganisms as Pickering emulsions stabilizers.

The purpose of this work was to study the ability of nineteen food-grade microorganisms as Pickering emulsion (PE) stabilizers. Medium-chain triacylglycerol (MCT) oil-in-water (50:50) PEs were fabricated by 10 wt% or 15 wt% of thermally-inactivated yeast, cocci, Bacillus spp. and lactobacilli cells. The characteristics of microorganisms related to "Pickering stabilization" including morphology, surface charge, interfacial tension, and "contact angle" were firstly studied. After that, the cells-stabilized PEs were characterized from both kinetic and thermodynamic viewpoints, microstructure and rheological properties. The interfacial tension and "contact angle" values of various microorganisms ranged from 16.33 to 38.31 mN/m, and from 15° to 106°, respectively. The mean droplet size of PEs ranged from 11.51 to 57.69 µm. Generally, the physical stability of cell-stabilized PEs followed this order: lactobacilli > Bacillus spp. > cocci > yeast. These variations were attributed to the morphology and cell wall composition. Increasing the microorganism concentration significantly increased the physical stability of PEs from a maximum of 12 days at 10 wt% to 35 days at 15 wt% as a result of better interface coverage. Shear-thinning and dominant elastic behaviors were observed in PEs. Physical stability was affected by the free energy of detachment. Therefore, food-grade microorganisms are suggested for stabilizing PEs.

Designing ultra-stable linseed oil-in-water Mickering emulsions using whey protein isolate cold-set microgels containing marjoram aqueous extract: Effect of pH and extract on rheological, physical, and chemical properties.

In this study, whey protein isolate (WPI) cold-set microgels containing marjoram (Origanum majorana) aqueous extract (MAE) were prepared at different pHs (4.0, 5.0, and 6.0). After characterization, the microgel dispersion was used to stabilize linseed oil-in-water Mickering emulsions (MEs). The resultant MEs were then characterized in terms of physicochemical and rheological properties under the effect of pH and MAE addition. The morphology, particle size, zeta potential, and interfacial tension of microgels were affected by pH and MAE. XRD patterns showed the amorphous structure. Microgel-stabilized MEs did not reveal any significant sign of instability under gravity during 6 months of storage. All MEs had dominant elastic character. Despite the lowest zeta potential values, MEs prepared at pH 4 showed the highest physical stability against gravity but the lowest centrifugal stability against oiling off, which indicated that both viscous and elastic components are required for MEs stability. This sample had the highest apparent viscosity and the strongest viscoelastic properties. Rheological data were best fitted with Herschel-Bulkley and Power Law models. An increase in pH and presence of MAE improved the oxidative stability of MEs. The results of this study showed that WPI microgels are appropriate candidate for long-term stabilization of linseed oil-in-water MEs. The presence of MAE is useful in designing special emulsions in which the aqueous phase is partially replaced by the aqueous extract of medicinal plants.

Development and characterization of antimicrobial alginate hydrogel beads filled with cinnamon essential oil nanoemulsion.

The aim of the present study was to investigate the characteristics of alginate beads filled with cinnamon essential oil nanoemulsions (CEONs). The influence of the alginate and CaCl2 concentrations on their physical, antimicrobial and antioxidant properties was studied. The droplet size of CEON was 146.20 ± 39.28 nm and the zeta potential was -33.8 ± 0.72 mV demonstrating proper nanoemulsions stability. Decreasing the alginate and CaCl2 concentrations resulted in higher EOs release due to the increased pore size of the alginate beads. The scavenging activity of DPPH of beads was found to be dependent on the alginate and calcium ion concentrations which affected the pore size of the fabricated beads. The FT-IR results declared the new bands in the spectra of filled hydrogel beads, which verified the encapsulation of EOs in the beads. The surface morphology of beads was studied using SEM images which showed the spherical shape and porous structure of alginate beads. In addition, the alginate beads filled with CEO nanoemulsion demonstrated strong antibacterial activity.

Enhancing phycocyanin solubility via complexation with fucoidan or κ-carrageenan and improving phycocyanin color stability by encapsulation in alginate-pregelatinized corn starch composite gel beads.

Phycocyanin (PC), as a pigment-protein complex, aggregates and precipitates in acidic environments. In this context, complex formation with anionic polysaccharides is a strategy to enhance protein solubility. Besides, acidic conditions negatively affect the inherent blue color of PC, which can be prevented by encapsulation. Thereupon, in the present study, two different biopolymer-based systems, namely complexes and hydrogel beads, were prepared to increase PC solubility and its color stability under acidic conditions, respectively. Fucoidan and κ-carrageenan (KC) were separately utilized to make a complex with PC. Calcium alginate-pregelatinized corn starch (PCS) composite gel beads were used to encapsulate PC. The prepared samples were added into model systems simulating acidic conditions and then characterized during storage at 4 and 25 °C under dark conditions. Appropriate colloidal stabilities were observed for fucoidan/PC and KC/PC model systems. The color of the samples remained stable at 4 °C. As well, the bead carriers (i.e. alginate-PCS) properly protected PC against low pH conditions over time at 4 °C. Thereupon, the blue color of the beads satisfactorily remained stable at this temperature. The findings showed that complexation with fucoidan or KC and encapsulation in mixed hydrogel beads are promising routes for improving PC solubility and its color stability, respectively.

Effects of natural antioxidants and high-energy fabrication methods on physical properties and oxidative stability of flaxseed oil-in-water nanoemulsions.

The effects of high-energy fabrication methods, namely high-pressure homogenization (HPH) and ultrasonication (US), on physicochemical properties of flaxseed oil-in-water nanoemulsions (FNEs) containing clove essential oil (CEO) and/or pomegranate peel extract (PPE) were studied during storage at 4 and 25 °C. Nanoemulsions with relatively similar average droplet size were prepared by HPH and/or US. An increase in droplet size was observed over time. Lower storage temperature and fabrication by US increased Ostwald ripening rate. Higher storage temperature and fabrication by US decreased the centrifugal stability of nanoemulsions. CEO revealed better antioxidant properties than PPE. The oxidative stability was evaluated by determining secondary oxidation products, and fatty acids profile. The absence of antioxidant, fabrication by US, and higher storage temperature decreased the oxidative stability of nanoemulsions. The results of this study might be helpful in controlling the oxidation of FNEs during long-term storage and in designing functional foods and beverages.

Fabrication and characterization of phycocyanin-alginate-pregelatinized corn starch composite gel beads: Effects of carriers on kinetic stability of phycocyanin.

Composite gel beads using calcium alginate and different concentrations of pregelatinized corn starch (PCS) were produced to encapsulate phycocyanin (PC). Rheological properties of different sodium alginate/PCS/PC mixtures, structural and morphological properties of beads, and kinetic stability of encapsulated PC (upon heating at various time-temperature combinations) were then assessed. Rheological properties of the mixtures exhibited shear thinning behaviors. Aquagram revealed that the PC-containing beads had more water structure with weak­hydrogen bonds. Morphological images represented less subsidence in the structures of composite gel beads, unlike PCS-free beads. Kinetic study showed that degradation rate constant values of PC encapsulated in composite gel beads (1.08-3.45 × 10-4, 3.38-4.43 × 10-4, and 5.57-15.32 × 10-4 s-1) were lower than those in PCS-free alginate gel beads (4.45 × 10-4, 9.20 × 10-4, and 18.04 × 10-4 s-1) at 40, 50, and 60 °C, respectively. This study suggests that the composite gel beads can improve PC stability.

Hemostatic efficacy of composite polysaccharide powder (starch-chitosan) for emergency bleeding control: An animal model study.

BACKGROUND: Blood clot formation or hemostasis is vital to minimize blood loss and mitigate the risk of death from severe bleeding. This study investigates the characteristics of a novel hemostatic composite containing chemically modified chitosan and starch for emergency bleeding control. The performance of this novel hemostatic powder was compared with commercially available starch-based (Arista AH) and chitosan-based (Celox) hemostats. METHODS: Hemostatic composite was prepared according to the patent registered by the authors (Patent No. 100865, Iranian Intellectual Property Organization) in Bani Zist Baspar Healda, Inc. (Shiraz, Iran). The properties of the product were surveyed by Fourier-transform infrared spectroscopy and compared with Arista-AH and Celox as commercial counterparts. The cytocompatibility, hemolysis, platelet and red blood cells (RBCs) adhesion, biocompatibility, and biodegradability attributes were evaluated in in vivo and in vitro studies. Hemostatic efficacy was evaluated in 24 healthy 6-month-old male New Zealand white rabbits in lethal and sublethal injuries of femoral artery and veins, respectively. RESULTS: Modification and composition led to a fundamental development in physicochemical characteristics including swelling properties, water absorption, and platelet and RBC adhesion due to improved electrostatic and hydrophilic attributes. The significant superiority in clotting efficiency was confirmed after the application of the composite in 2 models of venous and arterial injury in comparison with common commercial hemostats. CONCLUSION: Simultaneous use of water-absorbing compounds and introducing positively charged functional groups to hemostatic material led to a considerable control of femoral bleeding in emergency conditions. The introduced composite was biodegradable and biocompatible and prompts RBC aggregation and platelet adhesion.

Development and characterization of medium and high internal phase novel multiple Pickering emulsions stabilized by hordein nanoparticles.

Medium and high internal phase W1/O/W2 multiple Pickering emulsions (MPEs) were fabricated by physically-modified hordein nanoparticles. A triphasic system was developed at dispersed phase volume fraction (Φ) of 0.5 with an overrun value of ∼40%. No overrun was detected in high internal phase MPEs (Φ 0.8). Optical and confocal laser scanning microscopy confirmed the formation of MPEs. Monomodal droplet size distribution with a mean diameter of 32.90 and 21.48 µm was observed for MPEs at Φ 0.5 and Φ 0.8, respectively. Static multiple light scattering confirmed that creaming was the main mechanism behind the instability of MPEs. Both MPEs revealed pseudo-plastic behavior and predominant storage modulus (G') over the applied frequency range. The encapsulation efficiency of vitamin B12 in MPEs was 98.3% and remained relatively constant during 28 d. These results suggested the excellent potential of hordein nanoparticles as appropriate candidate for designing multi-structural colloidal systems using plant proteins.

Atmospheric Pressure Cold Plasma Modification of Basil Seed Gum for Fabrication of Edible Film Incorporated with Nanophytosomes of Vitamin D3 and Tannic Acid.

The purpose of this work was to first investigate the impact of cold plasma (CP) treatment, performed at various times (0-30 min), on the characteristics of basil seed gum (BSG), as well as the fabrication of functional edible films with the modified BSG. FT-IR spectra of CP-treated BSG revealed change at 1596 and 1718 cm-1, indicating the formation of carbonyl groups. Both untreated and CP-modified BSG dispersions showed shear-thinning behavior with a higher apparent viscosity for the CP-modified dispersions at studied temperatures. Untreated BSG dispersion and the one treated by CP for 10 min revealed time-independent behavior, while those treated for 20 and 30 min showed a rheopectic behavior. CP-modified BSG dispersion had higher G', G″, and complex viscosity than untreated BSG. Higher contact angle for the CP-modified BSG suggested enhanced hydrophobic nature, while the surface tension was lower compared to the untreated BSG. SEM micrographs revealed an increase in the surface roughness of treated samples. Moreover, modified BSG was successfully used for the preparation of edible film incorporating tannic acid and vitamin D3-loaded nanophytosomes with high stability during storage compared to the free form addition. The stability of encapsulated forms of vitamin D3 and tannic acid was 39.77% and 38.91%, more than that of free forms, respectively. In conclusion, CP is an appropriate technique for modifying the properties of BSG and fabrication of functional edible films.

Effect of sol-gel transition of oil phase (O) and inner aqueous phase (W1) on the physical and chemical stability of a model PUFA rich-W1/O/W2 double emulsion.

In this study, the effect of sol-gel transition of oil phase (O) and inner aqueous phase (W1) on the physical and chemical stability of a model PUFA rich-W1/O/W2 double emulsion (DE) was investigated. Thermal-driven gelation of O and W1 was performed using monoglyceride and κ-carrageenan, respectively. To accelerate lipid oxidation, ferrous sulfate was encapsulated in W1. Using this approach, O gelation reduced the volume-weighted size (d4,3) of DEs droplets and provided good physical stability. However, non-gelled DEs and those containing gelled W1 exhibited extensive flocculation and coalescence. Moreover, oleogelation resulted in a predominant elastic behavior with weak frequency dependence of viscoelastic properties. Oxidation was significantly reduced by W1 gelation; however, the O gelation led to a higheroxidation rate. Oxidation kinetic parameters induced by a hydrophilic (gallic acid) and a lipophilic (α-tocopherol) antioxidant showed that DEs containing gelled O droplets presented high physical and oxidative stability when α-tocopherol was present.