Intramolecular Phenolic H-Atom Abstraction by a N3ArOH Ligand-Supported (µ-η2:η2-Peroxo)dicopper(II) Species Relevant to the Active Site Function of oxy-Tyrosinase.

Synthetic side-on peroxide-bound dicopper(II) (SP) complexes are important for understanding the active site structure/function of many copper-containing enzymes. This work highlights the formation of new {CuII(µ-η2:η2-O22-)CuII} complexes (with electronic absorption and resonance Raman (rR) spectroscopic characterization) using tripodal N3ArOH ligands at -135 °C, which spontaneously participate in intramolecular phenolic H-atom abstraction (HAA). This results in the generation of bis(phenoxyl radical)bis(µ-OH)dicopper(II) intermediates, substantiated by their EPR/UV-vis/rR spectroscopic signatures and crystal structural determination of a diphenoquinone dicopper(I) complex derived from ligand para-C═C coupling. The newly observed chemistry in these ligand-Cu systems is discussed with respect to (a) our Cu-MeAN (tridentate N,N,N',N',N″-pentamethyldipropylenetriamine)-derived model SP species, which was unreactive toward exogenous monophenol addition (J. Am. Chem. Soc. 2012, 134, 8513-8524), emphasizing the impact of intramolecularly tethered ArOH groups, and (b) recent advances in understanding the mechanism of action of the tyrosinase (Ty) enzyme.

Coordination Variations within Binuclear Copper Dioxygen-Derived (Hydro)Peroxo and Superoxo Species; Influences upon Thermodynamic and Electronic Properties.

Copper ion is a versatile and ubiquitous facilitator of redox chemical and biochemical processes. These include the binding of molecular oxygen to copper(I) complexes where it undergoes stepwise reduction-protonation. A detailed understanding of thermodynamic relationships between such reduced/protonated states is key to elucidate the fundamentals of the chemical/biochemical processes involved. The dicopper(I) complex [CuI2(BPMPO-)]1+ {BPMPOH = 2,6-bis{[(bis(2-pyridylmethyl)amino]methyl}-4-methylphenol)} undergoes cryogenic dioxygen addition; further manipulations in 2-methyltetrahydrofuran generate dicopper(II) peroxo [CuII2(BPMPO-)(O22-)]1+, hydroperoxo [CuII2(BPMPO-)(-OOH)]2+, and superoxo [CuII2(BPMPO-)(O2•-)]2+ species, characterized by UV-vis, resonance Raman and electron paramagnetic resonance (EPR) spectroscopies, and cold spray ionization mass spectrometry. An unexpected EPR spectrum for [CuII2(BPMPO-)(O2•-)]2+ is explained by the analysis of its exchange-coupled three-spin frustrated system and DFT calculations. A redox equilibrium, [CuII2(BPMPO-)(O22-)]1+ ⇄ [CuII2(BPMPO-)(O2•-)]2+, is established utilizing Me8Fc+/Cr(η6-C6H6)2, allowing for [CuII2(BPMPO-)(O2•-)]2+/[CuII2(BPMPO-)(O22-)]1+ reduction potential calculation, E°' = -0.44 ± 0.01 V vs Fc+/0, also confirmed by cryoelectrochemical measurements (E°' = -0.40 ± 0.01 V). 2,6-Lutidinium triflate addition to [CuII2(BPMPO-)(O22-)]1+ produces [CuII2(BPMPO-)(-OOH)]2+; using a phosphazene base, an acid-base equilibrium was achieved, pKa = 22.3 ± 0.7 for [CuII2(BPMPO-)(-OOH)]2+. The BDFEOO-H = 80.3 ± 1.2 kcal/mol, as calculated for [CuII2(BPMPO-)(-OOH)]2+; this is further substantiated by H atom abstraction from O-H substrates by [CuII2(BPMPO-)(O2•-)]2+ forming [CuII2(BPMPO-)(-OOH)]2+. In comparison to known analogues, the thermodynamic and spectroscopic properties of [CuII2(BPMPO-)] O2-derived adducts can be accounted for based on chelate ring size variations built into the BPMPO- framework and the resulting enhanced CuII-ion Lewis acidity.

Stable abnormal N-heterocyclic carbenes and their applications.

Although N-heterocyclic carbenes (NHCs) have been known as ligands for organometallic complexes since the 1960s, these carbenes did not attract considerable attention until Arduengo et al. reported the isolation of a metal-free imidazol-2-ylidene in 1991. In 2001 Crabtree et al. reported a few complexes featuring an NHC isomer, namely an imidazol-5-ylidene, also termed abnormal NHC (aNHCs). In 2009, it was shown that providing to protect the C-2 position of an imidazolium salt, the deprotonation occurred at the C-5 position, affording imidazol-5-ylidenes that could be isolated. Over the last ten years, stable aNHCs have been used for designing a range of catalysts employing Pd(ii), Cu(i), Ni(ii), Fe(0), Zn(ii), Ag(i), and Au(i/iii) metal based precursors. These catalysts were utilized for different organic transformations such as the Suzuki-Miyaura cross-coupling reaction, C-H bond activation, dehydrogenative coupling, Huisgen 1,3-dipolar cycloaddition (click reaction), hydroheteroarylation, hydrosilylation reaction and migratory insertion of carbenes. Main-group metal complexes were also synthesized, including K(i), Al(iii), Zn(ii), Sn(ii), Ge(ii), and Si(ii/iv). Among them, K(i), Al(iii), and Zn(ii) complexes were used for the polymerization of caprolactone and rac-lactide at room temperature. In addition, based on the superior nucleophilicity of aNHCs, relative to that of their nNHCs isomers, they were used for small molecules activation, such as carbon dioxide (CO2), nitrous oxide (N2O), tetrahydrofuran (THF), tetrahydrothiophene and 9-borabicyclo[3.3.1]nonane (9BBN). aNHCs have also been shown to be efficient metal-free catalysts for ring opening polymerization of different cyclic esters at room temperature; they are among the most active metal-free catalysts for ε-caprolactone polymerization. Recently, aNHCs successfully accomplished the metal-free catalytic formylation of amides using CO2 and the catalytic reduction of carbon dioxide, including atmospheric CO2, into methanol, under ambient conditions. Although other transition metal complexes featuring aNHCs as ligand have been prepared and used in catalysis, this review article summarize the results obtained with the isolated aNHCs.

NHC-catalyzed silylative dehydration of primary amides to nitriles at room temperature.

Herein we report an abnormal N-heterocyclic carbene catalyzed dehydration of primary amides in the presence of a silane. This process bypasses the energy demanding 1,2-siloxane elimination step usually required for metal/silane catalyzed reactions. A detailed mechanistic cycle of this process has been proposed based on experimental evidence along with computational study.

Transforming atmospheric CO2 into alternative fuels: a metal-free approach under ambient conditions.

This work demonstrates the first-ever completely metal-free approach to the capture of CO2 from air followed by reduction to methoxyborane (which produces methanol on hydrolysis) or sodium formate (which produces formic acid on hydrolysis) under ambient conditions. This was accomplished using an abnormal N-heterocyclic carbene (aNHC)-borane adduct. The intermediate involved in CO2 capture (aNHC-H, HCOO, B(OH)3) was structurally characterized by single-crystal X-ray diffraction. Interestingly, the captured CO2 can be released by heating the intermediate, or by passing this compound through an ion-exchange resin. The capture of CO2 from air can even proceed in the solid state via the formation of a bicarbonate complex (aNHC-H, HCO3, B(OH)3), which was also structurally characterized. A detailed mechanism for this process is proposed based on tandem density functional theory calculations and experiments.

Open-Shell Phenalenyl in Transition Metal-Free Catalytic C-H Functionalization.

Open-shell phenalenyl chemistry has widely been explored in the last five decades demonstrating its potential in various applications including molecular switch, spin memory device, molecular battery, cathode material, etc. In this article, we have explored another new direction of open-shell phenalenyl chemistry toward transition metal-free catalytic C-H functionalization process. A phenalenyl ligand, namely, 9-methylamino-phenalen-1-one (4a), promoted chelation-assisted single electron transfer (SET) process, which facilitates the C-H functionalization of unactivated arenes to form the biaryl products. The present methodology offers a diverse substrate scope, which can be operated without employing any dry or inert conditions and under truly transition metal based catalyst like loading yet avoiding any expensive or toxic transition metal. This not only is the first report on the application of phenalenyl chemistry in C-H functionalization process but also provides a low-catalyst loading organocatalytic system (up to 0.5 mol % catalyst loading) as compared to the existing ones (mostly 20-40 mol %), which has taken advantage of long known phenalenyl based radical stability through the presence of its low-lying nonbonding molecular orbital.

Abnormal N-heterocyclic carbene main group organometallic chemistry: a debut to the homogeneous catalysis.

Abnormal N-heterocyclic carbene (aNHC) adducts of zinc(II) (1) and aluminum(III) (2) were synthesized. The compounds were characterized by NMR spectroscopy and elemental analysis. The solid state structures of these complexes (1 and 2) were determined by single crystal X-ray study. Furthermore, these organozinc and organoaluminum adducts (1 and 2) were tested for the ring opening polymerization of cyclic esters. These adducts were found to be quite efficient catalysts for the polymerization of cyclicesters such as rac-lactide (rac-LA), ε-caprolactone (ε-CL), and δ-valerolactone (δ-VL). Furthermore, aNHC zinc adduct has been used as catalyst for the synthesis of a tri-block copolymer.