Neutron imaging with an inertial electrostatic confinement fusion neutron source.

A compact inertial electrostatic confinement (IEC) fusion neutron source was developed. Imaging tests using the cylindrical IEC neutron source were conducted with the indirect imaging plate (IP) method using dysprosium foil and an imaging plate. An array of B4C powder contained in a stainless-steel blade and Cd pins was successfully imaged. To calculate thermal neutron flux of the device, we tested multiple types of IP and IP scanners with the indirect IP method to create a calibration curve, and it was confirmed that dental IP scanners, which are more widely used than industrial ones, can be applied to the indirect IP method.

Highly efficient pulsed power supply system with a two-stage LC generator and a step-up transformer for fast capillary discharge soft x-ray laser at shorter wavelength.

Highly efficient and compact pulsed power supply system for a capillary discharge soft x-ray laser (SXRL) has been developed. The system consists of a 2.2 microF two-stage LC inversion generator, a 2:54 step-up transformer, a 3 nF water capacitor, and a discharge section with a few tens of centimeter length capillary. Adoption of the pulsed transformer in combination with the LC inversion generator enables us to use only one gap switch in the circuit for charging the water capacitor up to about 0.5 MV. Furthermore, step-up ratio of a water capacitor voltage to a LC inversion generator initial charging voltage is about 40 with energy transfer efficiency of about 50%. It also leads to good reproducibility of a capillary discharge which is necessary for lasing a SXRL stably. For the study of the possibility of lasing a SXRL at shorter wavelength in a small laboratory scale, high-density and high-temperature plasma column suitable for the laser can be generated relatively easily with this system.