Exploring Aromaticity Effects on Electronic Transport in Cyclo[n]carbon Single-Molecule Junctions.

Cyclo[n]carbon (Cn) is one member of the all-carbon allotrope family with potential applications in next-generation electronic devices. By employing first-principles quantum transport calculations, we have investigated the electronic transport properties of single-molecule junctions of Cn, with n = 14, 16, 18, and 20, connected to two bulk gold electrodes, uncovering notable distinctions arising from the varying aromaticities. For the doubly aromatic C14 and C18 molecules, slightly deformed complexes at the singlet state arise after bonding with one Au atom at each side; in contrast, the reduced energy gaps between the highest occupied and the lowest unoccupied molecular orbitals due to the orbital reordering observed in the doubly anti-aromatic C16 and C20 molecules lead to heavily deformed asymmetric complexes at the triplet state. Consequently, spin-unpolarized transmission functions are obtained for the Au-C14/18-Au junctions, while spin-polarized transmission appears in the Au-C16/20-Au junctions. Furthermore, the asymmetric in-plane π-type hybrid molecular orbitals of the Au-C16/20-Au junctions contribute to two broad but low transmission peaks far away from the Fermi level (Ef), while the out-of-plane π-type hybrid molecular orbitals dominate two sharp transmission peaks that are adjacent to Ef, thus resulting in much lower transmission coefficients at Ef compared to those of the Au-C14/18-Au junctions. Our findings are helpful for the design and application of future cyclo[n]carbon-based molecular electronic devices.

The Growth and Shape Evolution of Indium Nanoplates Studied by In Situ Liquid Cell TEM.

Understanding the growth mechanisms of nanomaterials is crucial for effectively controlling their morphology which may affect their properties. Here, the growth process of indium nanoplates is studied using in situ liquid cell transmission electron microscopy. Quantitative analysis shows that the growth of indium nanoplate is limited by surface reaction. Besides, the growth process has two stages, which is different from that of other metal nanoplates reported previously. At the first stage, indium particles transform gradually from face-centered cubic to body-centered tetragonal (bct) structure as the seeds grow. At the second stage, the seeds grow faster than at the first stage and form indium triangular nanoplates. Indium triangular nanoplates have a bct structure with {011}-twin, which is found to form through kinetic reactions. In addition, the shape evolution of truncated triangle nanoplate with multiple twin planes is studied. The growth rate of truncated edge changes with the varied number of re-entrant grooves. The present work provides valuable insights into the growth mechanism of metal nanoplates with low-symmetric structure and the role of twin planes in the shape evolution of plate-like metal nanomaterials.

Tuning Surface Organic Structures by Small Gas Molecules through Catassembly and Coassembly.

The field of molecular assembly has seen remarkable advancements across various domains, such as materials science, nanotechnology, and biomedicine. Small gas molecules serve as pivotal modulators, capable of altering the architecture of assemblies via tuning a spectrum of intermolecular forces including hydrogen bonding, dipole-dipole interactions, and metal coordination. Surface techniques, notably scanning tunneling microscopy and atomic force microscopy, have proven instrumental in dissecting the structural metamorphosis and characteristic features of these assemblies at an unparalleled single-molecule resolution. Recent research has spotlighted two innovative approaches for modulating surface molecular assemblies with the aid of small gas molecules: "catassembly" and "coassembly". This Perspective delves into these methodologies through the lens of varying molecular interaction types. The strategies discussed here for regulating molecular assembly structures using small gas molecules can aid in understanding various complex assembly processes and structures and provide guidance for the further fabrication of complex surface structures.

Effectively Enhancing the Conductance of Asymmetric Molecular Wires by Aligning the Energy Level and Symmetrizing the Coupling.

An asymmetric structure is an important strategy for designing highly conductive molecular wires for a gap-fixed molecular circuit. As the conductance enhancement in the current strategy is still limited to about 2 times, we inserted a methylene group as a spacer in a conjugated structure to modulate the structural symmetry. We found that the conductance drastically enhanced in the asymmetric molecular wire to 1.5 orders of magnitude as high as that in the symmetric molecular wire. First-principles quantum transport studies attributed the effective enhancement to the synchronization of improved energy alignment and nearly symmetric coupling between the frontier orbitals and the electrodes.

Unzipping Carbon Nanotubes to Sub-5-nm Graphene Nanoribbons on Cu(111) by Surface Catalysis.

Graphene nanoribbons (GNRs) are promising in nanoelectronics for their quasi-1D structures with tunable bandgaps. The methods for controllable fabrication of high-quality GNRs are still limited. Here a way to generate sub-5-nm GNRs by annealing single-walled carbon nanotubes (SWCNTs) on Cu(111) is demonstrated. The structural evolution process is characterized by low-temperature scanning tunneling microscopy. Substrate-dependent measurements on Au(111) and Ru(0001) reveal that the intermediate strong SWCNT-surface interaction plays a pivotal role in the formation of GNRs.

Structure transformation from Sierpinski triangles to chains assisted by gas molecules.

Reversible transformations between fractals and periodic structures are of fundamental importance for understanding the formation mechanism of fractals. Currently, it is still a challenge to controllably achieve such a transformation. We investigate the effect of CO and CO2 molecules on Sierpinski triangles (STs) assembled from Fe atoms and 4,4″-dicyano-1,1':3',1″-terphenyl (C3PC) molecules on Au surfaces. Using scanning tunneling microscopy, we discover that the gas molecules induce a transition from STs into 1D chains. Based on density functional theory modeling, we propose that the atomistic mechanism involves the transformation of a stable 3-fold coordination Fe(C3PC)3 motif to Fe(C3PC)4 with an axially bonded CO molecule. CO2 causes the structural transformation through a molecular catassembly process.

Robust covalent pyrazine anchors forming highly conductive and polarity-tunable molecular junctions with carbon electrodes.

In molecular electronics, electrode-molecule anchoring strategies play a crucial role in the design of stable and high-performance functional single-molecule devices. Herein, we employ aromatic pyrazine as anchors to connect a central anthracene molecule to carbon electrodes including graphene and armchair single-walled carbon nanotubes (SWCNTs), and theoretically investigate their atomic structures and electronic transport properties. These molecular junctions can be constructed via condensation reactions of the central molecules terminated with ortho-phenylenediamines with ortho-quinone-functionalized nanogaps of graphene and SWCNT electrodes. With two direct C-N covalent bonds connecting the central molecule site-selectively to carbon electrodes in a coplanar way, pyrazine anchors are advantageous for forming stable and structurally well-defined molecular junctions, being expected to reduce the uncertainty about the electrode-molecule linkage motifs. The junction transport is highly efficient due to the coplanar geometry and the ensuing strong π-type molecule-electrode electronic coupling. Furthermore, our calculations show that molecular junctions with pyrazine anchors and carbon electrodes are usually n-type electronic devices; upon hydrogenation of pyridinic nitrogen atoms, the device polarity can be tuned to p-type, indicating that the pyrazine anchors can also serve as a powerful platform for tailoring in situ the polarity of charge carriers in carbon-electrode molecular electronic devices.

Observation of Biradical Spin Coupling through Hydrogen Bonds.

Investigation of intermolecular electron spin interaction is of fundamental importance in both science and technology. Here, radical pairs of all-trans retinoic acid molecules on Au(111) are created using an ultralow temperature scanning tunneling microscope. Antiferromagnetic coupling between two radicals is identified by magnetic-field-dependent spectroscopy. The measured exchange energies are from 0.1 to 1.0 meV. The biradical spin coupling is mediated through O─H⋯O hydrogen bonds, as elucidated from analysis combining density functional theory calculation and a modern version of valence bond theory.

Evaluation of toxicological safety and quality control of Luobufukebiri pill.

ETHNOPHARMACOLOGICAL RELEVANCE: The Luobufukebiri pill is one of the characteristic medicines of Uygur nationality in Xinjiang. It has the effect of warming and tonifying the brain and kidney, benefiting the heart and filling the essential functions, mainly used to treat impotence, depression, spermatorrhea, premature ejaculation, bodily weakness, emaciation, and neurasthenia. AIM OF THE STUDY: This study evaluated the toxicology and developed a quality control protocol of Luobufukebiri pill to ensure its safety and effectiveness in clinical applications. MATERIALS AND METHODS: Acute toxicity in mice was studied by the maximum-dose method, and the toxic reactions in mice were observed within two weeks. In the study of Sub-chronic toxicity, SD rats were randomized into four groups: three drug groups which were treated with 8.00, 2.67, and 0.80 g/kg of Luobufukebiri pill, respectively, and one control group which was treated with the same volume of distilled water. Subsequently, at 30 days of medication and 30 days of drug withdrawal, the hematologic indexes, biochemical indexes, organ coefficient, and pathological sections of main organs were detected, respectively. According to the prescription, the contents of 8 active components in the pill were quantified simultaneously. The chromatographic conditions were as follows: Stepwise gradient elution was carried out using 0.1% formic acid (solvent A) and acetonitrile (solvent B), 0-8 min, 80% → 60% B; 8-25 min, 60% → 25%B. The flow rate was 1.0 mL/min, the column was maintained at 25 °C, and the injected sample volume was 10 µL. RESULTS: The acute toxicity experiment documented a large dose of Luobufukebiri pill had no significant effect on organ and body weight and did not cause apparent damage to parenchymal organs. At Sub-chronic toxicity, the behavior of rats was as normal as the control group. There were some differences in hematologic indexes, serum biochemical indexes, and organ coefficient tests between the drug and control groups, but they had no toxic significance. No obvious pathological changes were observed in the pathological sections of major organs. In conclusion, this study demonstrated that the clinical dose of Luobufukebiri pill was far less than its toxic dose, and it had reliable safety. The contents of eight index components of Luobufukebiri pill were measured. All calibration curves exhibited good linearity with correlation coefficients better than 0.9997. The relative standard deviations of precision, reproducibility, stability, and recovery were less than 2.0%, demonstrating the stability and reliability of the method. CONCLUSIONS: This study further confirmed the safety of Luobufukebiri pill in clinical practice. A rapid, accurate, and convenient RP-HPLC-PDA detection method has been developed for the simultaneous detection of eight active compounds in the pharmaceutical samples of Luobufukebiri pill. This study provided a reference for the safety and enhancement of the quality standards of Luobufukebiri pill.

Improving the short-term frequency stability of a magnetic-state-selected cesium beam clock with optical detection.

The microwave spectrum line shape and the signal-to-noise ratio of a compact optically detected magnetic-state-selection cesium beam clock are analyzed in this paper. As the noise analysis shows, the performance is related to the atomic utilization ratio and locking parameters when the laser frequency noise is the dominant noise source. Methods are adopted for realizing better short-term frequency stability of the clock, including using a highly efficient state-selection cesium beam tube, optimizing the locking parameters, and stabilizing the microwave power to maximize the error signal. After optimization, the signal-to-noise ratio of the clock reaches 7.0 × 103 in a bandwidth of 1 Hz and the clock demonstrates a short-term stability of 4.1 × 10-12 τ-1/2. The five-day Allan standard deviation reaches 7.7 × 10-15.

In Situ Tuning of the Charge-Carrier Polarity in Imidazole-Linked Single-Molecule Junctions.

Manipulating the nature of the charge carriers at the single-molecule level is one of the major challenges of molecular electronics. Using first-principles quantum transport calculations, we have investigated the electronic transport properties of imidazole-linked single-molecule junctions and identified the hydrogen atom bonded to the pyrrole-like nitrogen in imidazole as a switch to tune the polarity of the charge carriers. Our calculations show that the chemical nature of the imidazole anchors is dramatically altered by dehydrogenation, which changes the dominant charge carriers from electrons to holes. It is also revealed that upon dehydrogenation the interfacial Au-N bonds are modified from donor-acceptor-like to covalent, along with a significant promotion of the low-bias conductance and the junction stability. At variance with other traditional methods that always require drastic modifications of the junction structure, our findings provide a promising approach to tailor in situ the polarity of charge carriers in molecular electronic devices.

Using Weakly Supervised Deep Learning to Classify and Segment Single-Molecule Break-Junction Conductance Traces.

In order to design molecular electronic devices with high performance and stability, it is crucial to understand their structure-to-property relationships. Single-molecule break junction measurements yield a large number of conductance-distance traces, which are inherently highly stochastic. Here we propose a weakly supervised deep learning algorithm to classify and segment these conductance traces, a method that is mainly based on transfer learning with the pretrain-finetune technique. By exploiting the powerful feature extraction capabilities of the pretrained VGG-16 network, our convolutional neural network model not only achieves high accuracy in the classification of the conductance traces, but also segments precisely the conductance plateau from an entire trace with very few manually labeled traces. Thus, we can produce a more reliable estimation of the junction conductance and quantify the junction stability. These findings show that our model has achieved a better accuracy-to-manpower efficiency balance, opening up the possibility of using weakly supervised deep learning approaches in the studies of single-molecule junctions.

On-surface preparation of coordinated lanthanide-transition-metal clusters.

The study of lanthanide (Ln)-transition-metal (TM) heterometallic clusters which play key roles in various high-tech applications is a rapid growing field of research. Despite the achievement of numerous Ln-TM cluster compounds comprising one Ln atom, the synthesis of Ln-TM clusters containing multiple Ln atoms remains challenging. Here, we present the preparation and self-assembly of a series of Au-bridged heterometallic clusters containing multiple cerium (Ce) atoms via on-surface coordination. By employing different pyridine and nitrile ligands, the ordered coordination assemblies of clusters containing 2, 3 and 4 Ce atoms bridged by Au adatoms are achieved on Au(111) and Au(100), as revealed by scanning tunneling microscopy. Density functional theory calculations uncover the indispensable role of the bridging Au adatoms in constructing the multi-Ce-containing clusters by connecting the Ce atoms via unsupported Ce-Au bonds. These findings demonstrate on-surface coordination as an efficient strategy for preparation and organization of the multi-Ln-containing heterometallic clusters.

Surface self-assembly involving the interaction between S and N atoms.

Controllable molecular self-assembly is vital for nanostructure construction. Here, three different self-assembling networks are realized by varying the chemical composition of the molecular building blocks of the same architecture. This is the first time that SN electrostatic attraction has been employed to regulate surface self-assembly. All molecular structures are characterized using low-temperature scanning tunnelling microscopy. The density functional theory calculations elaborate the structure formation mechanism.

Manipulation of Molecular Spin State on Surfaces Studied by Scanning Tunneling Microscopy.

The adsorbed magnetic molecules with tunable spin states have drawn wide attention for their immense potential in the emerging fields of molecular spintronics and quantum computing. One of the key issues toward their application is the efficient controlling of their spin state. This review briefly summarizes the recent progress in the field of molecular spin state manipulation on surfaces. We focus on the molecular spins originated from the unpaired electrons of which the Kondo effect and spin excitation can be detected by scanning tunneling microscopy and spectroscopy (STM and STS). Studies of the molecular spin-carriers in three categories are overviewed, i.e., the ones solely composed of main group elements, the ones comprising 3d-metals, and the ones comprising 4f-metals. Several frequently used strategies for tuning molecular spin state are exemplified, including chemical reactions, reversible atomic/molecular chemisorption, and STM-tip manipulations. The summary of the successful case studies of molecular spin state manipulation may not only facilitate the fundamental understanding of molecular magnetism and spintronics but also inspire the design of the molecule-based spintronic devices and materials.

Packing Sierpinski Triangles into Two-Dimensional Crystals.

Fractals are of fundamental importance in science and technology. Theoretical simulations indicate that Sierpinski triangles (STs) possess specific optical and electronic properties. To study their properties and uncover their potential applications, it is necessary to pack STs into large-scale two-dimensional crystalline structures. Here, a series of ordered structures consisting of ST units are successfully constructed on gold surfaces through coordination between 1,3-bis(4-pyridyl) benzene molecules and Fe atoms. Crystals of STs are characterized by scanning tunneling microscopy. K-map analysis explains the structural formation mechanism, which is further verified by density functional theory calculations. The molecular free diffusion and nice structure matching between STs and gold surfaces play important roles in the formation of crystals of STs.

Single-Molecule Conductance through an Isoelectronic B-N Substituted Phenanthrene Junction.

Single-molecule conductance of a B-N substituted phenanthrene derivative and its isoelectronic C═C counterpart was investigated by the scanning tunneling microscopy break junction (STM-BJ) technique. The incorporation of the B-N motif results in a better single-molecule conductivity than the C═C analogue. Furthermore, the Lewis acid-base reaction between F- and the B atom of the B-N motif leads to a decrease of the conductance of the BN derivative, which can be understood due to the shifting of the energy positions of the LUMO, as revealed by quantum transport calculations, even though the HOMO-LUMO gap decreases in the B-F Lewis acid-base. These findings provide insights for modulating electron transport properties by isoelectronic structure design. The B-N isoelectronic substituted structure could be a feasible way to design single-molecule devices such as switches and chemical sensors.

Tuning rotation axes of single molecular rotors by a combination of single-atom manipulation and single-molecule chemistry.

Defining the axis of a molecular rotation is vital for the bottom-up design of molecular rotors. The rotation of tin-phthalocyanine molecules on the Ag(111) surface is studied by scanning tunneling microscopy and atomic/molecular manipulation at 4 K. Tin-phthalocyanine acts as a molecular rotor that binds to Ag adatoms and the substrate. Four different rotation axes are constructed at positions from the center to the periphery of the molecule. Furthermore, using the asymmetric appearance of the modified molecule, the rotation direction of the molecules is identified. This work provides a new approach for designing molecular rotors or motors with definable rotation radii and functions.

Dirac-cone induced gating enhancement in single-molecule field-effect transistors.

Using graphene as electrodes provides an opportunity for fabricating stable single-molecule field-effect transistors (FETs) operating at room temperature. However, the role of the unique graphene band structure in charge transport of single-molecule devices is still not clear. Here we report the Dirac-cone induced electrostatic gating effects in single-molecule FETs with graphene electrodes and a solid-state local bottom gate. With the highest occupied molecular orbital (HOMO) as the dominating conduction channel and the graphene leads remaining intrinsic at zero gate voltage, electrostatic gating on the HOMO and the density of states of graphene at the negative gate polarity reinforces each other, resulting in an enhanced conductance modulation. In contrast, gating effects on the HOMO and the graphene states at the positive gate polarity are opposite. Depending on the gating efficiencies, the conductance can decrease, increase or remain almost unchanged when a more positive gate voltage is applied. Our observations can be well understood by a modified single-level model taking into account the linear dispersion of graphene near the Dirac point. Single-molecule FETs with Dirac-cone enhanced gating have shown high performances, with the modulation of a wide range of current over one order of magnitude. Our studies highlight the advantages of using graphene as an electrode material for molecular devices and pave the way for single-molecule FETs toward circuitry applications.

Construction and Properties of Sierpinski Triangular Fractals on Surfaces.

Fractal structures are of fundamental importance in science, engineering, mathematics, and aesthetics. Construction of molecular fractals on surfaces can help to understand the formation mechanism of fractals and a series of achievements have been acquired in the preparation of molecular fractals. This review focuses on Sierpinski triangles (STs), representatives of various prototypical fractals, on surfaces. They are investigated by Monte Carlo simulations and ultra-high vacuum scanning tunneling microscopy. STs are bonded through halogen bonds, hydrogen bonds, metal-organic coordination bonds and covalent bonds. The coexistence of and competition between fractals and crystals are realized for a hydrogen-bonded system. Electronic properties of two types of STs are summarized.