Boosting Catalytic and Anti-fluorination Performance of the Ru/Vanadia-Titania Catalyst for the Oxidative Destruction of Freon by Sulfuric Acid Modification.

Chlorofluorocarbons (CFCs) exert a strong greenhouse effect and constitute the largest contributor to ozone depletion. Catalytic removal is considered an effective pathway for eliminating low-concentration CFCs under mild conditions. The key issue is the easy deactivation of the catalysts due to their surface fluorination. We herein report a comparative investigation on catalytic dichlorodifluoromethane (CFC-12) removal in the absence or presence of water over the sulfuric-acid-modified three-dimensionally ordered macroporous vanadia-titania-supported Ru (S-Ru/3DOM VTO) catalysts. The S-Ru/3DOM VTO catalyst exhibited high activity (T90% = 278 °C at space velocity = 40 000 mL g-1 h-1) and good stability within 60 h of on-stream reaction in the presence of 1800 ppm of water due to the improvements in acid site amount and redox ability that promoted the adsorption of CFC-12 and the activation of C-F bonds. Compared with the case under dry conditions, catalytic performance for CFC-12 removal was better over the S-Ru/3DOM VTO catalyst in the presence of water. Water introduction mitigated surface fluorination by the replenishment of hydroxyl groups, inhibited the formation of halogenated byproducts via the surface fluorine species cleaning effect, and promoted the reaction pathway of COX2 (X = Cl/F) → carboxylic acid → CO2.

A General Dual-Metal Nanocrystal Dissociation Strategy to Generate Robust High-Temperature-Stable Alumina-Supported Single-Atom Catalysts.

Designing new synthesis routes to fabricate highly thermally durable precious metal single-atom catalysts (SACs) is challenging in industrial applications. Herein, a general strategy is presented that starts from dual-metal nanocrystals (NCs), using bimetallic NCs as a facilitator to spontaneously convert a series of noble metals to single atoms on aluminum oxide. The metal single atoms are captured by cation defects in situ formed on the surface of the inverse spinel (AB2O4) structure, which process provides numerous anchoring sites, thus facilitating generation of the isolated metal atoms that contributes to the extraordinary thermodynamic stability. The Pd1/AlCo2O4-Al2O3 shows not only improved low-temperature activity but also unprecedented (hydro)thermal stability for CO and propane oxidation under harsh aging conditions. Furthermore, our strategy exhibits a small scaling-up effect by the simple physical mixing of commercial metal oxide aggregates with Al2O3. The good regeneration between oxidative and reductive atmospheres of these ionic palladium species makes this catalyst system of potential interest for emissions control.

Enhanced Water Resistance and Catalytic Performance of Ru/TiO2 by Regulating Brønsted Acid and Oxygen Vacancy for the Oxidative Removal of 1,2-Dichloroethane and Toluene.

The compositions of volatile organic compounds (VOCs) under actual industrial conditions are often complex; especially, the interaction of intermediate products easily leads to more toxic emissions that are harmful to the atmospheric environment and human health. Herein, we report a comparative investigation on 1,2-dichloroethane (1,2-DCE) and (1,2-DCE + toluene) oxidation over the Ru/TiO2, phosphotungstic acid (HPW)-modified Ru/TiO2, and oxygen vacancy-rich Ru/TiOx catalysts. The doping of HPW successfully introduced the 1,2-DCE adsorption sites to promote its oxidation and exhibited outstanding water resistance. For the mixed VOCs, Ru/HPW-TiO2 promoted the preferential and superfluous adsorption of toluene and resulted in the inhibition of 1,2-DCE degradation. Therefore, HPW modification is a successful strategy in catalytic 1,2-DCE oxidation, but Brønsted acid sites tend to adsorb toluene in the mixed VOC oxidation. The Ru/TiOx catalyst exhibited excellent activity and stability in the oxidation of mixed VOCs and could inhibit the generation of byproducts and Cl2 compared with the Ru/HPW-TiO2 catalyst. Compared with the Brønsted acid modification, the oxygen vacancy-rich catalysts are significantly suitable for the oxidation of multicomponent VOCs.

Engineering Platinum Catalysts via a Site-Isolation Strategy with Enhanced Chlorine Resistance for the Elimination of Multicomponent VOCs.

Pt-based catalysts can be poisoned by the chlorine formed during the oxidation of multicomponent volatile organic compounds (VOCs) containing chlorinated VOCs. Improving the low-temperature chlorine resistance of catalysts is important for industrial applications, although it is yet challenging. We hereby demonstrate the essential catalytic roles of a bifunctional catalyst with an atomic-scale metal/oxide interface constructed by an intermetallic compound nanocrystal. Introducing trichloroethylene (TCE) exhibits a less negative effect on the catalytic activity of the bimetallic catalyst for o-xylene oxidation, and the partial deactivation caused by TCE addition is reversible, suggesting that the bimetallic, HCl-etched Pt3Sn(E)/CeO2 catalyst possesses much stronger chlorine resistance than the conventional Pt/CeO2 catalyst. On the site-isolated Pt-Sn catalyst, the presence of aromatic hydrocarbon significantly inhibits the adsorption strength of TCE, resulting in excellent catalytic stability in the oxidation of the VOC mixture. Furthermore, the large amount of surface-adsorbed oxygen species generated on the electronegative Pt is highly effective for low-temperature C-Cl bond dissociation. The adjacent promoter (Sn-O) possesses the functionality of acid sites to provide sufficient protons for HCl formation over the bifunctional catalyst, which is considered critical to maintaining the reactivity of Pt by removing Cl and decreasing the polychlorinated byproducts.

N-doped carbon-modified palladium catalysts with superior water resistant performance for the oxidative removal of toxic aromatics.

The supported palladium catalysts perform well in the oxidative removal of hazardous aromatic hydrocarbons. However, water vapor can seriously deactivate the catalysts especially in the low-temperature regime. Hence, improving moisture resistance of the Pd-based catalysts is full of challenge in the removal of aromatics. Herein, we report a new type of Pd@NC/BN catalysts featured with nitrogen-doped carbon layers modified Pd supported on hexagonal boron nitride (h-BN), and the relationship between structure and water resistance of the catalysts. The results show that in the presence of 10 vol% H2O in the feedstock, the Pd@NC/BN catalyst could effectively oxidize o-xylene (with an almost 87% removal efficiency), whereas o-xylene conversion declined from 69% to 20% over the conventional Pd/Al2O3 at a reaction temperature of 210 °C and a space velocity of 40,000 mL/(g h). The adsorption of H2O was significantly inhibited on the nitrogen-doped carbon layers due to the hydrophobic nature. Meanwhile, the oxygen species active for o-xylene oxidation were not only from the adsorbed gas-phase oxygen but also from the new active oxygen (*OOH and *OH) species that were generated via the interaction of O2 and H2O in the presence of water in the feedstock. It is concluded that the reactive oxygen species that accelerated the activation and cleavage of C-H bonds significantly facilitated the conversion of key intermediate species (from benzaldehyde to benzoic acid), thus playing a decisive role in o-xylene oxidation. The present work provides a direction for developing the superior water resistance catalysts with hydrophobic nature and good water activation ability in the oxidative removal of volatile organic compounds.

Electronically Engineering Water Resistance in Methane Combustion with an Atomically Dispersed Tungsten on PdO Catalyst.

Improving the low-temperature water-resistance of methane combustion catalysts is of importance for industrial applications and it is challenging. A stepwise strategy is presented for the preparation of atomically dispersed tungsten species at the catalytically active site (Pd nanoparticles). After an activation process, a Pd-O-W1 -like nanocompound is formed on the PdO surface with an atomic scale interface. The resulting supported catalyst has much better water resistance than the conventional catalysts for methane combustion. The integrated characterization results confirm that catalytic combustion of methane involves water, proceeding via a hydroperoxyl-promoted reaction mechanism on the catalyst surface. The results of density functional theory calculations indicate an upshift of the d-band center of palladium caused by electron transfer from atomically dispersed tungsten, which greatly facilitates the adsorption and activation of oxygen on the catalyst.

High Selectivity to HCl for the Catalytic Removal of 1,2-Dichloroethane Over RuP/3DOM WOx: Insights into the Effects of P-Doping and H2O Introduction.

Ru-based catalysts for catalytic combustion of high-toxicity Cl-containing volatile organic compounds are inclined to produce Cl2 instead of ideal HCl due to the Deacon reaction. We herein reported that the three-dimensionally ordered macroporous (3DOM) WOx-supported RuP nanocatalyst greatly improved HCl selectivity (at 400 °C, increased from 66.0% over Ru/3DOM WOx to 96.4% over RuP/3DOM WOx) and reduced chlorine-containing byproducts for 1,2-dichloroethane (1,2-DCE) oxidation. P-doping enhanced the number of structural hydroxyl groups and Brønsted acid sites. The isotopic 1,2-DCE temperature-programmed desorption experiment in the presence of H218O indicated the generation of a new active oxygen species 16O18O that participated in the reaction. Generally, P-doping and H2O introduction could promote the exchange reaction between Cl and hydroxyl groups, rather than oxygen defects, and then benefit the production of HCl and reduce the generation of other chlorine species or Cl2, via the reaction processes of C2H3Cl → alcohol → aldehyde → carboxylic acids.

Coupled Palladium-Tungsten Bimetallic Nanosheets/TiO2 Hybrids with Enhanced Catalytic Activity and Stability for the Oxidative Removal of Benzene.

Since the conventional Pd-based catalysts often suffer severe deactivation by water, development of a catalyst with good activity and moisture-resistance ability is of importance in effectively controlling emissions of volatile organic compounds (VOCs). Herein, we report the efficient synthesis of ultrathin palladium-tungsten bimetallic nanosheets with exceptionally high dispersion of tungsten species. The supported catalyst (TiO2/PdW) shows good performance for benzene oxidation, and 90% conversion is achieved at a temperature of 200 °C and a space velocity of 40 000 mL g-1 h-1. The TiO2/PdW catalyst also exhibits better water-tolerant ability than the traditional Pd/TiO2 catalyst. The high catalytic efficiency can be explained by the facile redox cycle of the active Pd2+/Pd0 couple in the close-contact PdO x-WO x-TiO2 arrangement. We propose that the reason for good tolerance to water is that the lattice oxygen of the TiO2/PdW catalyst can effectively replenish the oxygen in active PdO x sites consumed by benzene oxidation. A four-step benzene transformation mechanism promoted by the catalyst is proposed. The present work provides a useful idea for the rational design of efficient bimetallic catalysts for the removal of VOCs under the high humidity conditions.

Ni-Ti Layered Double Hydroxide@Graphitic Carbon Nitride Nanosheet: A Novel Nanocomposite with High and Ultrafast Sonophotocatalytic Performance for Degradation of Antibiotics.

Pollution of water resources by antibiotics is a growing environmental concern. In this work, nanocomposites of g-C3N4@Ni-Ti layered double hydroxides (g-C3N4@Ni-Ti LDH NCs) with high surface areas were synthesized through an optimized hydrothermal method, in the presence of NH4F. Application of various characterization techniques unraveled that the prepared nanocomposites are composed of porous Ni-Ti LDH nanoparticles and hierarchical g-C3N4 nanosheets. Further, these NCs were employed for photocatalytic and sonophotocatalytic removal of amoxicillin (AMX), as a model antibiotic, from aqueous solutions. In addition, sonocatalysis was performed. It was found out that the g-C3N4@Ni-Ti LDH NCs outperform their pure g-C3N4 and Ni-Ti LDH components in photocatalytic degradation of AMX under visible light irradiation. Also, the following order was determined for efficiency of the three adopted processes: sonocatalysis < photocatalysis < sonophotocatalysis. Furthermore, variation of the sonophotocatalysis conditions specified 500 W light intensity, 9 s on/1 s off ultrasound pulse modem and 1.25 g/L g-C3N4-20@Ni-Ti LDH as the optimal conditions. In this way, optimization of the highly efficient sonophotocatalytic process resulted in 99.5% AMX degradation within 75 min. Moreover, a TOC analyzer was employed to estimate the rate of AMX degradation over the nanocomposites. In addition, formation of hydroxyl radicals (•OH) on the surface of the g-C3N4-20@Ni-Ti LDH particles was approved using the terephthalic acid probe in photoluminescence (PL) spectroscopy. No significant loss was observed in the sonophotocatalytic activity of the nanocomposites even after five consecutive runs. Also, a plausible mechanism was proposed for the sonophotocatalysis reaction. In general, our findings can be considered as a starting point for synthesis of other g-C3N4-based NCs and application of the resultant nanocomposites to environmental remediation.