Systematic review of impacts of occupational exposure to wildfire smoke on respiratory function, symptoms, measures and diseases.

BACKGROUND: Wildfire smoke contains numerous hazardous air pollutants which pose serious health risks to humans. Despite this, there has been a limited focus on the assessment of the acute physiological and longer-term respiratory effects of wildfire exposure on firefighters and other emergency workers. Therefore, we undertook a systematic review of the evidence about the respiratory impacts of occupational wildfire smoke exposure among wildfire fighters (WFF). METHODS: Eligible studies from Medline, Embase and Scopus databases were included if they described the relationship between wildfire exposure and respiratory function, symptoms, measures and diseases amongst emergency personnel or firefighters who had responded to wildfires. RESULTS: Twenty-six articles met the inclusion criteria. 24 out of 26 (22 out of 23 moderate/high quality) studies provided evidence of adverse respiratory effects, including reduced lung function, increased airway dysfunction and airway inflammation, upper and lower respiratory tract symptoms and increased asthma incidence related to wildfires or prescribed burns exposure among WFF and police responders. Fourteen out of 19 studies showed statistically significant declines in spirometry measures of lung function (mostly short-term studies). Two studies using complex lung function tests showed a significant effect on peripheral airway function. DISCUSSION: This review found a convincing body of evidence that occupational exposure to wildfires or prescribed burns has both acute and possibly longer-term respiratory effects among WFFs and some other emergency personnel. Given that these events are increasing, more needs to be done to identify those most at risk and mitigate these risks.

Autoimmune diseases, autoantibody status and silicosis in a cohort of 1238 workers from the artificial stone benchtop industry.

OBJECTIVES: Autoimmune disorders are multifactorial but occupational exposures have long been implicated, including respirable crystalline silica (RCS). A modern epidemic of silicosis is emerging internationally, associated with dry processing of engineered stone with high (>90%) RCS content. We aimed to investigate the prevalence of clinical autoimmune disease and common autoantibodies in exposed workers. METHODS: Stone benchtop industry workers in Victoria, Australia were offered free screening for silicosis and related disorders. Symptoms or diagnoses of autoimmune disease were evaluated by questionnaire and blood tests taken for rheumatoid factor (RF), antinuclear antibodies (ANAs) and extractable nuclear antigens (ENAs). RESULTS: Among 1238 workers (93.3% male) screened from 2019 to 2021, 0.9% were confirmed with autoimmune disease. Among those without clinical disease, 24.6% had detectable ANAs (93.5% male), 4.6% detectable ENAs and 2.6% were positive for RF. Silicosis was diagnosed in 253 workers (24.3% of those with diagnostic information available). Of those with ANA readings, 54 (6.6%) had ANA titre >1:320. The likelihood of positive autoantibodies increased with age; smoking; higher exposure to RCS and silicosis diagnosis. CONCLUSION: The proportion of workers with detectable ANAs or ENAs was considerably higher than the 5%-9% expected in the general population. Some of the antibodies detected (eg, Scl-70, CENPB) have high sensitivity and specificity for systemic sclerosis. Long-term follow-up will be needed to estimate incidence. Rheumatologists should explore occupational history in new cases of autoimmune disease. Screening for autoimmune disease is indicated in workers exposed to RCS as these individuals need specialised management and may be entitled to compensation.

The aryl hydrocarbon receptor pathway is a marker of lung cell activation but does not play a central pathologic role in engineered stone-associated silicosis.

Engineered stone-associated silicosis is characterised by a rapid progression of fibrosis linked to a shorter duration of exposure. To date, there is lack of information about molecular pathways that regulates disease development and the aggressiveness of this form of silicosis. Therefore, we compared transcriptome responses to different engineered stone samples and standard silica. We then identified and further tested a stone dust specific pathway (aryl hydrocarbon receptor [AhR]) in relation to mitigation of adverse lung cell responses. Cells (epithelial cells, A549; macrophages, THP-1) were exposed to two different benchtop stone samples, standard silica and vehicle control, followed by RNA sequencing analysis. Bioinformatics analyses were conducted, and the expression of dysregulated AhR pathway genes resulting from engineered stone exposure was then correlated with cytokine responses. Finally, we inhibited AhR pathway in cells pretreated with AhR antagonist and observed how this impacted cell cytotoxicity and inflammation. Through transcriptome analysis, we identified the AhR pathway genes (CYP1A1, CYP1B1 and TIPARP) that showed differential expression that was unique to engineered stones and common between both cell types. The expression of these genes was positively correlated with interleukin-8 production in A549 and THP-1 cells. However, we only observed a mild effect of AhR pathway inhibition on engineered stone dust induced cytokine responses. Given the dual roles of AhR pathway in physiological and pathological processes, our data showed that expression of AhR target genes could be markers for assessing toxicity of engineered stones; however, AhR pathway might not play a significant pathologic role in engineered stone-associated silicosis.

Chest x-ray has low sensitivity to detect silicosis in artificial stone benchtop industry workers.

BACKGROUND AND OBJECTIVE: Chest x-ray (CXR) remains a core component of health monitoring guidelines for workers at risk of exposure to crystalline silica. There has however been a lack of evidence regarding the sensitivity of CXR to detect silicosis in artificial stone benchtop industry workers. METHODS: Paired CXR and high-resolution computed tomography (HRCT) images were acquired from 110 artificial stone benchtop industry workers. Blinded to the clinical diagnosis, each CXR and HRCT was independently read by two thoracic radiologists from a panel of seven, in accordance with International Labour Office (ILO) methodology for CXR and International Classification of HRCT for Occupational and Environmental Respiratory Diseases. Accuracy of screening positive (ILO major category 1, 2 or 3) and negative (ILO major category 0) CXRs were compared with identification of radiological features of silicosis on HRCT. RESULTS: CXR was positive for silicosis in 27/110 (24.5%) workers and HRCT in 40/110 (36.4%). Of the 83 with a negative CXR (ILO category 0), 15 (18.1%) had silicosis on HRCT. All 11 workers with ILO category 2 or 3 CXRs had silicosis on HRCT. In 99 workers ILO category 0 or 1 CXRs, the sensitivity of screening positive CXR compared to silicosis identified by HRCT was 48% (95%CI 29-68) and specificity 97% (90-100). CONCLUSION: Compared to HRCT, sensitivity of CXR was low but specificity was high. Reliance on CXR for health monitoring would provide false reassurance for many workers, delay management and underestimate the prevalence of silicosis in the artificial stone benchtop industry.

Psychometric properties of the Perceived Stress Scale (PSS-10) in silica-exposed workers from diverse cultural and linguistic backgrounds.

BACKGROUND: The Perceived Stress Scale (PSS-10) has been used in a range of occupational cohorts, but only recently in stone benchtop workers undergoing screening for silicosis. The aim of this study was to compare psychometric properties of the PSS-10 in stone benchtop workers amongst those born overseas or who used an interpreter. METHODS: Stone benchtop workers in Melbourne, Australia completed the PSS-10 as part of their occupational screening for silicosis. Internal consistency was assessed with Cronbach's α for the total score and the positive and negative subscales. Validity was assessed using confirmatory factor analysis (CFA). Analysis was performed for the total group and for subgroups according to sex, interpreter use, overseas-born, and language spoken at home. RESULTS: The results of 682 workers with complete PSS-10 scores were included in analysis. Most participants were male (93%), with mean age 36.9 years (SD 11.4), with just over half (51.6%) born in Australia, 10.1% using an interpreter, and 17.5% using a language other than English at home. Cronbach's α for the overall group (α = 0.878) suggested good internal consistency. DISCUSSION: CFA analysis for validity testing suggested PSS-10 performance was good for both sexes, moderate for country of birth and language spoken at home categories, but poorer for those who used an interpreter. Whilst professional interpreters provide a range of benefits in the clinical setting, the use of translated and validated instruments are important, particularly in cohorts with large numbers of migrant workers. CONCLUSION: This study describes the psychometric properties of the PSS-10 in a population of stone benchtop workers, with good internal consistency, and mixed performance from validity testing across various subgroups.

Prevalence and risk factors for silicosis among a large cohort of stone benchtop industry workers.

OBJECTIVES: High silica content artificial stone has been found to be associated with silicosis among stone benchtop industry (SBI) workers. The objectives of this study were to determine the prevalence of and risk factors for silicosis among a large cohort of screened SBI workers, and determine the reliability of respiratory function testing (RFT) and chest x-ray (CXR) as screening tests in this industry. METHODS: Subjects were recruited from a health screening programme available to all SBI workers in Victoria, Australia. Workers undertook primary screening, including an International Labour Office (ILO) classified CXR, and subject to prespecified criteria, also underwent secondary screening including high-resolution CT (HRCT) chest and respiratory physician assessment. RESULTS: Among 544 SBI workers screened, 95% worked with artificial stone and 86.2% were exposed to dry processing of stone. Seventy-six per cent (414) required secondary screening, among whom 117 (28.2%) were diagnosed with silicosis (median age at diagnosis 42.1 years (IQR 34.8-49.7)), and all were male. In secondary screening, silicosis was associated with longer SBI career duration (12 vs 8 years), older age, lower body mass index and smoking. In those with silicosis, forced vital capacity was below the lower limit of normal in only 14% and diffusion capacity for carbon monoxide in 13%. Thirty-six (39.6%) of those with simple silicosis on chest HRCT had an ILO category 0 CXR. CONCLUSION: Screening this large cohort of SBI workers identified exposure to dry processing of stone was common and the prevalence of silicosis was high. Compared with HRCT chest, CXR and RFTs had limited value in screening this high-risk population.

GM-CSF antibodies in artificial stone associated silicoproteinosis: A case report and literature review.

Pulmonary alveolar proteinosis (PAP) is a rare lung disease where there is accumulation of surfactant in the alveoli. It can be classified based on the underlying aetiology into three categories: primary, secondary and congenital. Autoantibodies to granulocyte-macrophage colony-stimulating factor (GM-CSF-Ab) are a key diagnostic feature of autoimmune PAP. High intensity occupational exposure and inhalation of toxic particles such as silica can cause a form of secondary PAP called acute silicoproteinosis. We describe a 26-year-old stone benchtop fabricator with silicoproteinosis following daily exposure to high levels of silica who had elevated serum GM-CSF-Ab. We discuss the role of GM-CSF-Ab in cases of PAP with occupational inhalational exposure and the challenges in its interpretation.

Occupational Lung Health: A global problem requiring local awareness.

See related article See related article See related article See related article See related article See related article See related article.

Unexpected case of accelerated silicosis in a female quarry worker.

Silicosis is a progressive and irreversible fibrotic occupational lung disease caused by inhalation of respirable crystalline silica (RCS). Recently, outbreaks have been reported in industries involving direct work with high silica-containing materials, such as artificial stone. Here, we describe an unexpected diagnosis made in an asymptomatic 33-year-old female worker employed for 4 years at a quarry for rhyodacite and rhyolite which contain 70% silicon dioxide. Chest computed tomography demonstrated small nodules in the upper lobes and larger ill-defined areas of opacity. Bronchoalveolar lavage revealed fine birefringent material within the cytoplasm of alveolar macrophages, representing silica. Transbronchial biopsies of lung parenchyma and endobronchial ultrasound-guided transbronchial needle aspiration of mediastinal lymph nodes did not reveal features of sarcoidosis, tuberculosis, or malignancy. As such, a diagnosis of accelerated silicosis was confirmed and represents the first reported case in a female worker at a rhyodacite and rhyolite quarry.

Current global perspectives on silicosis-Convergence of old and newly emergent hazards.

Silicosis not a disease of the past. It is an irreversible, fibrotic lung disease specifically caused by exposure to respirable crystalline silica (RCS) dust. Over 20,000 incident cases of silicosis were identified in 2017 and millions of workers continue to be exposed to RCS. Identified case numbers are however a substantial underestimation due to deficiencies in reporting systems and occupational respiratory health surveillance programmes in many countries. Insecure workers, immigrants and workers in small businesses are at particular risk of more intense RCS exposure. Much of the focus of research and prevention activities has been on the mining sector. Hazardous RCS exposure however occurs in a wide range of occupational setting which receive less attention, in particular the construction industry. Recent outbreaks of silicosis associated with the fabrication of domestic kitchen benchtops from high-silica content artificial stone have been particularly notable because of the young age of affected workers, short duration of RCS exposure and often rapid disease progression. Developments in nanotechnology and hydraulic fracking provide further examples of how rapid changes in technology and industrial processes require governments to maintain constant vigilance to identify and control potential sources of RCS exposure. Despite countries around the world dealing with similar issues related to RCS exposure, there is an absence of sustained global public health response including lack of consensus of an occupational exposure limit that would provide protection to workers. Although there are complex challenges, global elimination of silicosis must remain the goal.

Silica Exposure Estimates in Artificial Stone Benchtop Fabrication and Adverse Respiratory Outcomes.

Silicosis is being increasingly reported among young stonemasons in the artificial stone (AS) benchtop fabrication and installation industry. Respiratory health screening, which included a job and exposure history, a chest X-ray (CXR), a respiratory health questionnaire, and gas transfer testing, were offered to stonemasons in Victoria, Australia. Workers typically reported a variety of tasks, including cleaning and labouring, which made exposure assessment complex. We estimated the relative respirable crystalline silica exposure intensity of each job from the proportion of time using AS and the proportion of time doing dry work (work without water suppression). The relative average intensity of exposure for up to five jobs was calculated. Cumulative exposure was calculated as the sum of the duration multiplied by intensity for each job. Installers and factory machinists (other than computer numeric control operators) were the most likely to report dry work with AS, and so had a greater average intensity of exposure. Exposure intensity and cumulative exposure were associated with increased odds of an ILO (International Labour Organisation) CXR profusion major category of ≥1 and with dyspnoea. Exposure duration was also associated with ILO profusion category. In multivariate analyses of health outcomes, only job type was associated with the ILO profusion category. For both most recent and longest-duration job types, when compared to the lowest exposure group, factory machinists were more likely to have an ILO category ≥1. This suggests that intensity of exposure estimated from the proportion of time dry cutting and proportion of time working on AS can predict the risk of adverse respiratory outcomes for workers in this industry.

Identification of early-stage silicosis through health screening of stone benchtop industry workers in Victoria, Australia.

OBJECTIVES: The popularity of high silica content artificial stone has been associated with emergence of severe, progressive silicosis as a major health issue affecting workers in the stone benchtop industry. This population-based health assessment programme has been implemented with the aim of identifcation of silica-associated disease at a preclinical stage. METHODS: All current and former workers from the stone benchtop industry in the State of Victoria are offered free health assessments. Primary evaluations include a standardised questionnaire, physical examination, spirometry and gas transfer assessment and International Labour Organisation-categorised chest X-ray. Secondary evaluations include high-resolution CT chest, blood tests and a respiratory physician evaluation. RESULTS: At the end of the first 12 months, 86/239 (36%) workers who had completed secondary evaluation were diagnosed with silicosis (65 simple silicosis and 21 complicated silicosis). 22 had worked in the industry for less than 10 years at the time of diagnosis. Of those with simple silicosis, 80% of workers reported breathlessness only with strenuous exercise (modified Medical Research Council score of 0), and lung function was well preserved (prebronchodilator forced vital capacity mean 99.8% predicted (SD 13.6), diffusion capacity of the lung for carbon monoxide mean 96.2% predicted (SD 18.0)). Antinuclear antibodies were detected in 37% with silicosis and 24% without silicosis. CONCLUSION: Early results from this comprehensive health assessment programme have indicated a high proportion of referred artificial stone benchtop workers have silicosis, including many with early-stage disease. The common finding of antinuclear antibodies suggest significant potential for autoimmune disease in this occupational group.

Artificial stone silicosis.

PURPOSE OF REVIEW: This review details recent findings related to the health effects of occupational exposure to artificial stone dust and the rapid increase in cases of artificial stone associated silicosis around the world. RECENT FINDINGS: High crystalline silica content artificial stone is now commonly used for the production of kitchen benchtops. Reports of artificial stone silicosis from many countries have noted that workers were typically employed at small workplaces and were often diagnosed in their 30s or 40s. Poor exposure control measures were common, including the practice of 'dry processing'. Dust generated from artificial stone has been noted to have properties that influence toxicity, including high silica content, generation of nanosized particles and presence of metals and resins. Artificial stone silicosis differs from silicosis associated with other occupational settings including shorter latency and rapid disease progression. High-resolution computed tomography (CT) chest imaging of artificial stone silicosis has often noted the presence of ground glass opacities, which may not be detected in chest x-ray screening. Increased prevalence of autoimmune disease, such as scleroderma, has also been reported in this industry. SUMMARY: Further evaluation of the safety of work with artificial stone is required, including the effectiveness of dust control measures. Current reports of artificial stone silicosis indicate the potential for widespread undiagnosed respiratory disease in this industry. Provision of more sensitive health screening methods for all at-risk workers and the development of new treatment options particularly for this form of silicosis is urgently required.

Occupational and environmental risk factors for idiopathic pulmonary fibrosis in Australia: case-control study.

INTRODUCTION: Idiopathic pulmonary fibrosis (IPF) is a lung disease of unknown cause characterised by progressive scarring, with limited effective treatment and a median survival of only 2-3 years. Our aim was to identify potential occupational and environmental exposures associated with IPF in Australia. METHODS: Cases were recruited by the Australian IPF registry. Population-based controls were recruited by random digit dialling, frequency matched on age, sex and state. Participants completed a questionnaire on demographics, smoking, family history, environmental and occupational exposures. Occupational exposure assessment was undertaken with the Finnish Job Exposure Matrix and Australian asbestos JEM. Multivariable logistic regression was used to describe associations with IPF as ORs and 95% CIs, adjusted for age, sex, state and smoking. RESULTS: We recruited 503 cases (mean±SD age 71±9 years, 69% male) and 902 controls (71±8 years, 69% male). Ever smoking tobacco was associated with increased risk of IPF: OR 2.20 (95% CI 1.74 to 2.79), but ever using marijuana with reduced risk after adjusting for tobacco: 0.51 (0.33 to 0.78). A family history of pulmonary fibrosis was associated with 12.6-fold (6.52 to 24.2) increased risk of IPF. Occupational exposures to secondhand smoke (OR 2.1; 1.2 to 3.7), respirable dust (OR 1.38; 1.04 to 1.82) and asbestos (OR 1.57; 1.15 to 2.15) were independently associated with increased risk of IPF. However occupational exposures to other specific organic, mineral or metal dusts were not associated with IPF. CONCLUSION: The burden of IPF could be reduced by intensified tobacco control, occupational dust control measures and elimination of asbestos at work.

Silica-related diseases in the modern world.

Silicosis is an ancient and potentially fatal pneumoconiosis caused by exposure to respirable crystalline silica. Silicosis is historically a disease of miners; however, failure to recognize and control the risk associated with silica exposure in contemporary work practices such as sandblasting denim jeans and manufacturing of artificial stone benchtops has led to re-emergence of silicosis around the world. This review outlines the mineralogy, epidemiology, clinical and radiological features of the various forms of silicosis and other silica-associated diseases. Perspective is provided on the most recent studies shedding light on pathogenesis, including the central role of innate immune effector cells and subsequent inflammatory cascades in propagating pulmonary fibrosis and the extrapulmonary manifestations, which uniquely characterize this pneumoconiosis. Clinical conundrums in differential diagnosis, particularly between silicosis and sarcoidosis, are highlighted, as is the importance of obtaining a careful occupational history in the patient presenting with pulmonary infiltrates and/or fibrosis. While silicosis is a completely preventable disease, unfortunately workers around the world continue to be affected and experience progressive or even fatal disease. Although no treatments have been proven, opportunities to intervene to prevent progressive disease, founded in a thorough cellular and molecular understanding of the immunopathology of silicosis, are highlighted.

Artificial stone-associated silicosis: a rapidly emerging occupational lung disease.

INTRODUCTION: Artificial stone is an increasingly popular material used to fabricate kitchen and bathroom benchtops. Cutting and grinding artificial stone is associated with generation of very high levels of respirable crystalline silica, and the frequency of cases of severe silicosis associated with this exposure is rapidly increasing. AIM: To report the characteristics of a clinical series of Australian workers with artificial stone-associated silicosis. METHODS: Respiratory physicians voluntarily reported cases of artificial stone-associated silicosis identified in their clinical practices. Physicians provided information including occupational histories, respiratory function tests, chest radiology and histopathology reports, when available. RESULTS: Seven male patients were identified with a median age of 44 years (range 26-61). All were employed in small kitchen and bathroom benchtop fabrication businesses with an average of eight employees (range 2-20). All workplaces primarily used artificial stone, and dust control measures were poor. All patients were involved in dry cutting artificial stone. The median duration of exposure prior to symptoms was 7 years (range 4-10). Six patients demonstrated radiological features of progressive massive fibrosis. These individuals followed up over a median follow-up period of 16 months (IQR 21 months) demonstrated rapid decline in prebronchodilator forced expiratory volume in 1 s of 386 mL/year (SD 204 mL) and forced vital capacity of 448 mL/year (SD 312 mL). CONCLUSIONS: This series of silicosis in Australian workers further demonstrates the risk-associated high-silica content artificial stone. Effective dust control and health surveillance measures need to be stringently implemented and enforced in this industry.